Analysis of Factors Affecting Neutralizing Antibody Production after COVID-19 Vaccination Using Newly Developed Rapid Point-of-Care Test.

(1) Objective: To investigate the factors that affect rates of neutralizing antibody production and duration after vaccination using the newly developed SARS-CoV-2 POCT. (2) Methods: The production of immunoglobulin and neutralizing antibody in clinical subjects who completed various vaccines was analyzed using the POCT, the semi-quantitative was interpreted by measurement application, and the quantified neutralizing antibody titers were using the ELISA. (3) Results: According to the clinical performance analysis of the POCT, the clinical sensitivity and the specificity were 96.8% (90/93) and 97.7% (167/171), respectively, for the S1 RBD IgG antibody. The clinical sensitivity was 92.22% (83/90), and the clinical specificity was 100.00% (174/174) for neutralizing antibodies. Factors influencing antibody production were analyzed using the whole blood of the five types of second-completed vaccinators (N = 736, 20−80 years old). General and neutralizing antibody and showed significant differences in age (p < 0.0001), vaccine type (p < 0.0001), inoculation interval (p < 0.0001), pain score (p < 0.0001), diabetes (p < 0.0001), and hypertension (p = 0.002). The gender (p = 0.021) and chronic fatigue (p = 0.02) did not show the significance. (4) Conclusions: An acquisition of immunoglobulin and neutralizing antibody varies according to vaccine type, age, days after vaccination, pain degree after vaccination, and underlying diseases. The POCT used in this study will be utilized for clinical recommendations such as deciding whether to receive additional vaccines through the immediate rapid determination of neutralizing antibody generation in the clinical site.

Effective Heat Dissipation from Color-Converting Plates in High-Power White Light Emitting Diodes by Transparent Graphene Wrapping.

We have developed a hybrid phosphor-in-glass plate (PGP) for application in a remote phosphor configuration of high-power white light emitting diodes (WLEDs), in which single-layer graphene was used to modulate the thermal characteristics of the PGP. The degradation of luminescence in the PGP following an increase in temperature could be prevented by applying single-layer graphene. First, it was observed that the emission intensity of the PGP was enhanced by about 20% with graphene wrapping. Notably, the surface temperature of the graphene-wrapped PGP (G-PGP) was found to be higher than that of the bare PGP, implying that the graphene layer effectively acted as a heat dissipation medium on the PGP surface to reduce the thermal quenching of the constituent phosphors. Moreover, these experimental observations were clearly verified through a two-dimensional cellular automata simulation technique and the underlying mechanisms were analyzed. As a result, the proposed G-PGP was found to be efficient in maintaining the luminescence properties of the WLED, and is a promising development in high power WLED applications. This research could be further extended to generate a new class of optical or optoelectronic materials with possible uses in a variety of applications.

Role of co-vapors in vapor deposition polymerization.

Polypyrrole (PPy)/cellulose (PPCL) composite papers were fabricated by vapor phase polymerization. Importantly, the vapor-phase deposition of PPy onto cellulose was assisted by employing different co-vapors namely methanol, ethanol, benzene, water, toluene and hexane, in addition to pyrrole. The resulting PPCL papers possessed high mechanical flexibility, large surface-to-volume ratio, and good redox properties. Their main properties were highly influenced by the nature of the co-vaporized solvent. The morphology and oxidation level of deposited PPy were tuned by employing co-vapors during the polymerization, which in turn led to change in the electrochemical properties of the PPCL papers. When methanol and ethanol were used as co-vapors, the conductivities of PPCL papers were found to have improved five times, which was likely due to the enhanced orientation of PPy chain by the polar co-vapors with high dipole moment. The specific capacitance of PPCL papers obtained using benzene, toluene, water and hexane co-vapors was higher than those of the others, which is attributed to the enlarged effective surface area of the electrode material. The results indicate that the judicious choice and combination of co-vapors in vapor-deposition polymerization (VDP) offers the possibility of tuning the morphological, electrical, and electrochemical properties of deposited conducting polymers.

Real-time detection of metal ions using conjugated polymer composite papers.

Cellulose, a natural polymeric material, has widespread technical applications because of its inherent structural rigidity and high surface area. As a conjugated polymer, polypyrrole shows practical potential for a diverse and promising range of future technologies. Here, we demonstrate a strategy for the real-time detection and removal of metal ions with polypyrrole/cellulose (PPCL) composite papers in solution. Simply, the conjugated polymer papers had different chemical/physical properties by applying different potentials to them, which resulted in differentiable response patterns and adsorption efficiencies for individual metal ions. First, large-area PPCL papers with a diameter of 5 cm were readily obtained via vapor deposition polymerization. The papers exhibited both mechanical flexibility and robustness, in which polypyrrole retained its redox property perfectly. The ability of the PPCL papers to recognize metal ions was examined in static and flow cells, in which real-time current change was monitored at five different applied potentials (+1, +0.5, 0, -0.5, and -1 V vs. Ag/AgCl). Distinguishable signals in the PPCL paper responses were observed for individual metal ions through principal component analysis. Particularly, the PPCL papers yielded unique signatures for three metal ions, Hg(ii), Ag(i), and Cr(iii), even in a real sample, groundwater. The sorption of metal ions by PPCL papers was examined in the flow system. The PPCL papers had a greatly superior adsorption efficiency for Hg(ii) compared to that of the other metal ions. With the strong demand for the development of inexpensive, flexible, light-weight, and environmentally friendly devices, the fascinating characteristics of these PPCL papers are likely to provide good opportunities for low-cost paper-based flexible or wearable devices.