ABSTRACT
We present a new type of aperture antenna with V-groove structures that are made of Au to enhance strong circularly polarized light (CPL). Simulations using the finite element method revealed that strong CPL was enhanced within the aperture with a diameter of 10 nm. The intensity of the electric field was enhanced and was 22,700 times greater than that of the incident light. The channel plasmon polaritons generated in the V-groove structures were responsible for the strong enhancement. The influence of the angle and length of the V-groove on the enhancement of the CPL was investigated.
ABSTRACT
We are studying a form of holographic data storage with phase conjugation, and we compensated for hologram distortion due to shrinkage of photopolymer materials in the holographic medium by controlling the wavefront of the reference beam. When a high NA lens and narrow angle interval of angle multiplexing are employed to obtain a high data recording density, some wavefronts cause interpage crosstalk on the reconstructed image. We tried to determine the moving range of actuators in a deformable mirror for controlling the wavefront. As a result, we found that the distortion in the hologram could be compensated while avoiding interpage crosstalk and that the bit error rates of the reproduced data could be decreased. We also found that the optimized wavefront could compensate for distortions in several neighboring data pages. This method can ensure a high data recording density in holographic data storage.
ABSTRACT
We have developed a method to use a half-size data page between two full-size data pages to increase the recording density in angular multiplexing holographic memory up to 1.5× as much as the conventional angular multiplexing sequence. In our recording sequence, the full- and half-size data pages are alternately multiplexed. This is because each plane wave from various points in a data page has different angular selectivity. A half-size data page has higher angular selectivity than a full-size data page. The required angular intervals were estimated by numerical simulation taking holographic medium tilt into account. Also, an angular multiplexing experiment using the half-data-page insertion method resulted in a low bit error rate of the order of 10(-3), which is sufficient for practical use.
ABSTRACT
Photopolymer materials shrink because of photopolymerization. This shrinkage distorts the recorded interference fringes in a medium made of such material, which in turn degrades the reconstructed image quality. Adaptive optics controlled by a genetic algorithm was developed to optimize the wavefront of the reference beam while reproducing in order to compensate for the interference fringe distortion. We defined a fitness measure for this genetic algorithm that involves the mean brightness and coefficients of the variations of bit data "1" and "0". In an experiment, the adaptive optics improved the reconstructed image to the extent that data could be reproduced from the entire area of the image, and the signal to noise ratio of the reproduced data could be improved.
