Enhancing Laser-Induced Graphene via Integration of Gold Nanoparticles and Titanium Dioxide for Sensing and Robotics Applications.

Laser-induced graphene (LIG) is a promising material for various applications due to its unique properties and facile fabrication. However, the electrochemical performance of LIG is significantly lower than that of pure graphene, limiting its practical use. Theoretically, integrating other conductive materials with LIG can enhance its performance. In this study, we investigated the effects of incorporating gold nanoparticles (AuNPs) and titanium dioxide (TiO2) into LIG on its electrochemical properties using ReaxFF molecular dynamics (MD) simulations and experimental validation. We found that both AuNPs and TiO2 improved the work function and surface potential of LIG, resulting in a remarkable increase in output voltage by up to 970.5% and output power density by 630% compared to that of pristine LIG. We demonstrated the practical utility of these performance-enhanced LIG by developing motion monitoring devices, self-powered sensing systems, and robotic hand platforms. Our work provides new insights into the design and optimization of LIG-based devices for wearable electronics and smart robotics, contributing to the advancement of sustainable technologies.

Green Synthesis of Laser-Induced Graphene with Copper Oxide Nanoparticles for Deicing Based on Photo-Electrothermal Effect.

Homogenously dispersed Cu oxide nanoparticles on laser-induced graphene (LIG) were fabricated using a simple two-step laser irradiation. This work emphasized the synergetic photo-electrothermal effect in Cu oxide particles embedded in LIG. Our flexible hybrid composites exhibited high mechanical durability and excellent thermal properties. Moreover, the Cu oxide nanoparticles in the carbon matrix of LIG enhanced the light trapping and multiple electron internal scattering for the electrothermal effect. The best conditions for deicing devices were also studied by controlling the amount of Cu solution. The deicing performance of the sample was demonstrated, and the results indicate that the developed method could be a promising strategy for maintaining lightness, efficiency, excellent thermal performance, and eco-friendly 3D processing capabilities.

Direct Laser Interference Ink Printing Using Copper Metal-Organic Decomposition Ink for Nanofabrication.

In this study, we developed an effective and rapid process for nanoscale ink printing, direct laser interference ink printing (DLIIP), which involves the photothermal reaction of a copper-based metal-organic decomposition ink. A periodically lined copper pattern with a width of 500 nm was printed on a 240 µm-wide line at a fabrication speed of 17 mm/s under an ambient environment and without any pre- or post-processing steps. This pattern had a resistivity of 3.5 µΩ∙cm, and it was found to exhibit a low oxidation state that was twice as high as that of bulk copper. These results demonstrate the feasibility of DLIIP for nanoscale copper printing with fine electrical characteristics.

Laser-Induced Graphene Heater Pad for De-Icing.

The replacement of electro-thermal material in heaters with lighter and easy-to-process materials has been extensively studied. In this study, we demonstrate that laser-induced graphene (LIG) patterns could be a good candidate for the electro-thermal pad. We fabricated LIG heaters with various thermal patterns on the commercial polyimide films according to laser scanning speed using an ultraviolet pulsed laser. We adopted laser direct writing (LDW) to irradiate on the substrates with computer-aided 2D CAD circuit data under ambient conditions. Our highly conductive and flexible heater was investigated by scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, X-ray diffraction, and Brunauer-Emmett-Teller. The influence of laser scanning speed was evaluated for electrical properties, thermal performance, and durability. Our LIG heater showed promising characteristics such as high porosity, light weight, and small thickness. Furthermore, they demonstrated a rapid response time, reaching equilibrium in less than 3 s, and achieved temperatures up to 190 °C using relatively low DC voltages of approximately 10 V. Our LIG heater can be utilized for human wearable thermal pads and ice protection for industrial applications.

Anisotropic Wettability on One-Dimensional Nanopatterned Surfaces: The Effects of Intrinsic Surface Wettability and Morphology.

Large-scale molecular dynamic simulations were conducted to study anisotropic wettability on one-dimensional (1D) nanopatterned surfaces. Hexadecane (C16H34) and decane (C10H22) nanodroplets were used as wetting liquids. Initially, surfaces with various intrinsic wettability (oleophobic and oleophilic) were produced using surface lattice size as a control parameter. These surfaces were subsequently patterned with 1D grooves of different sizes, and their anisotropic wettability was examined. The results show that anisotropic wettability strongly depends on intrinsic surface wettability and surface morphology. The results also demonstrate that the anisotropy in the contact angle is negligible for oleophobic surfaces. However, the anisotropy becomes more evident for oleophilic surfaces and increases with the degree of oleophilicity. Results suggest that anisotropy also depends on the surface morphology, including the patterns' width and height. Monitoring the droplet shape showed that more significant droplet distortion was associated with higher anisotropy. A clear association was lacking between the roughness ratio, r, and the degree of anisotropy. The observed average contact angle for 1D patterned oleophilic surfaces disagreed with the predicted values from the Wenzel theory. However, the theory could correctly predict the state of the droplet being Cassie-Baxter or Wenzel.

Highly Skin-Conformal Laser-Induced Graphene-Based Human Motion Monitoring Sensor.

Bio-compatible strain sensors based on elastomeric conductive polymer composites play pivotal roles in human monitoring devices. However, fabricating highly sensitive and skin-like (flexible and stretchable) strain sensors with broad working range is still an enormous challenge. Herein, we report on a novel fabrication technology for building elastomeric conductive skin-like composite by mixing polymer solutions. Our e-skin substrates were fabricated according to the weight of polydimethylsiloxane (PDMS) and photosensitive polyimide (PSPI) solutions, which could control substrate color. An e-skin and 3-D flexible strain sensor was developed with the formation of laser induced graphene (LIG) on the skin-like substrates. For a one-step process, Laser direct writing (LDW) was employed to construct superior durable LIG/PDMS/PSPI composites with a closed-pore porous structure. Graphene sheets of LIG coated on the closed-porous structure constitute a deformable conductive path. The LIG integrated with the closed-porous structure intensifies the deformation of the conductive network when tensile strain is applied, which enhances the sensitivity. Our sensor can efficiently monitor not only energetic human motions but also subtle oscillation and physiological signals for intelligent sound sensing. The skin-like strain sensor showed a perfect combination of ultrawide sensing range (120% strain), large sensitivity (gauge factor of ~380), short response time (90 ms) and recovery time (140 ms), as well as superior stability. Our sensor has great potential for innovative applications in wearable health-monitoring devices, robot tactile systems, and human-machine interface systems.

In situ synthesis of copper-ruthenium bimetallic nanoparticles on laser-induced graphene as a peroxidase mimic.

A new type of disposable flexible sensor for hydrogen peroxide (H2O2) detection was developed by in situ synthesis of copper-ruthenium bimetallic nanoparticles on a laser-induced graphene surface (Cu-Ru/LIG). The approach produced Cu-Ru/LIG via a solid phase transfer mechanism which loaded the metal precursor onto LIG, followed by laser scribing without demanding chemical vapor deposition or solution-based reactions. Cu-Ru/LIG showed a high electrocatalytic response toward H2O2 reduction at -0.4 V vs. Ag/AgCl. The sensor also showed good selectivity and reproducibility. This method provides an alternative route to easily synthesize various catalysts on conductive substrates for sensor applications.

Laser-Induced Biochar Formation through 355 nm Pulsed Laser Irradiation of Wood, and Application to Eco-Friendly pH Sensors.

Due to the limited availability of agricultural land, pH sensing is becoming more and more important these days to produce efficient agricultural products. Therefore, to fabricate eco-friendly and disposable sensors, the black carbon, which is called biochar, is formed by irradiation of a UV pulsed laser having a wavelength of 355 nm onto wood and applying the resulting material as a pH sensor. The surfaces of three types of wood (beech, cork oak, and ash) were converted to the graphitic structure after UV laser irradiation; their morphologies were investigated. In addition, since the content of lignin, an organic polymer, is different for each wood, optimal laser irradiation conditions (laser fluence) needed to form these woods into pH sensors were considered. Depending on the degree of oil-like material generated after laser irradiation, a disposable pH sensor that can be used from one to three times is fabricated; due to the environmental characteristics of wood and biochar, the sensor shows high availability in that it can be easily discarded after use on agricultural land. After that, it can be used as filter in soil. Our wood-based pH sensor sensitively measures sequential changes from pH 4 to pH 10 and shows a very linear change of △R/R, indicating its potential for use in agriculture.

Fabrication of UV Laser-Induced Porous Graphene Patterns with Nanospheres and Their Optical and Electrical Characteristics.

Many studies have been conducted to fabricate unique structures on flexible substrates and to apply such structures to a variety of fields. However, it is difficult to produce unique structures such as multilayer, nanospheres and porous patterns on a flexible substrate. We present a facile method of nanospheres based on laser-induced porous graphene (LIPG), by using laser-induced plasma (LIP). We fabricated these patterns from commercial polyimide (PI) film, with a 355 nm pulsed laser. For a simple one-step process, we used laser direct writing (LDW), under ambient conditions. We irradiated the PI film at a defocused plane -4 mm away from the focal plane, for high pulse overlap rate. The effect of the laser scanning speed was investigated by FE-SEM, to observe morphological characterization. Moreover, we confirmed the pattern characteristics by optical microscope, Raman spectroscopy and electrical experiments. The results suggested that we could modulate the conductivity and structural color by controlling the laser scanning speed. In this work, when the speed of the laser is 20 mm/s and the fluence is 5.28 mJ/cm2, the structural color is most outstanding. Furthermore, we applied these unique characteristics to various colorful patterns by controlling focal plane.

Direct Fabrication of Ultra-Sensitive Humidity Sensor Based on Hair-Like Laser-Induced Graphene Patterns.

Three-dimensional (3-D) porous graphitic structures have great potential for sensing applications due to their conductive carbon networks and large surface area. In this work, we present a method for facile fabrication of hair-like laser induced graphene (LIG) patterns using a laser scribing system equipped with a 355 nm pulsed laser. The polyimide (PI) film was positioned on a defocused plane and irradiated at a slow scanning speed using a misaligned laser beam. These patterns have the advantages of a large surface area and abundant oxidation groups. We have applied the hair-like LIG patterns to a humidity sensor. The humidity sensor showed good sensitivity characteristics and a large amount of electronic carriers can be stored.

360 nm Continuous Wave Laser-Based Contact or Non-Contact Laser Interference Nano Lithography.

LIL (laser interference lithography), which does not require a mask, is an effective way to create a wide variety of periodic patterns by exposing two laser beams on a specimen. The LIL method can be used for a wide range of nano-pattern spacing by adjusting the laser intensity, exposure time, and development time. In addition, it has been used in many studies due to its advantage with regard to the forming of nanostructures over a large area in a short period of time. However, the existing LIL technique requires demanding precision levels to align the laser beam. In this paper, we attempt to solve this problem by using a prism laser interferometer to complement the complicated beam alignment of LIL. In this study, ma-p1205 PR-coated silicon wafers were exposed to a CW laser with 360 nm wavelength using a contact-type and a non-contact prism interferometer. A rectangular triangular prism and an equilateral triangular prism of N-BK7 were used, and periods of 300 nm and 260 nm were fabricated, respectively. The MATLAB and COMSOL programs were used to compare the theoretical values and fabricated patterns.

Flexible and Highly Sensitive Strain Sensor Based on Laser-Induced Graphene Pattern Fabricated by 355 nm Pulsed Laser.

A laser-induced-graphene (LIG) pattern fabricated using a 355 nm pulsed laser was applied to a strain sensor. Structural analysis and functional evaluation of the LIG strain sensor were performed by Raman spectroscopy, scanning electron microscopy (SEM) imaging, and electrical-mechanical coupled testing. The electrical characteristics of the sensor with respect to laser fluence and focal length were evaluated. The sensor responded sensitively to small deformations, had a high gauge factor of ~160, and underwent mechanical fracture at 30% tensile strain. In addition, we have applied the LIG sensor, which has high sensitivity, a simple manufacturing process, and good durability, to human finger motion monitoring.

Diverging Effects of Topographical Continuity on the Wettability of a Rough Surface.

The effects of the continuity of the surface pattern on wetting enhancement was investigated using micropillar and microhole arrays on hydrophilic and hydrophobic materials. Isolated micropillar arrays and continuous microhole arrays were prepared by a microscale imprinting technique using positive and negative Si molds fabricated by a conventional photolithography technique. The contact angles (CAs) and contact angle hysteresis (CAH) of the prepared surfaces were measured as a function of the surface parameter ξ, defined as the ratio of the top surface area of the microstructure to the surface area of the flat unit cell. It was found that the CAs of the micropillar array monotonically increased as the surface ratio decreased, regardless of the native wettability of the solid. However, an abnormal and consistent decrease of the CAs for the microhole array was observed when ξ < 0.5. To investigate the mechanism of this abnormality in wetting enhancement, the energy barriers for normal direction wetting, the so-called wetting transition from Cassi-Baxter (CB) wetting to Wenzel wetting, and lateral direction wetting, that is, spreading, were investigated with consideration of the trapped air in the microhole. The analysis unveiled that the hydrophobicity of the hydrophilic surfaces are attributable to the liquid-air interface pinning at the discontinuous edge of the pillar, which results in CB wetting. The abnormal decrease in the CAs of the microhole-patterned surfaces with ξ < 0.5 has been attributed to the relatively low energy barrier for spreading influenced by the continuity of the three-phase contact line. Additionally, trapped air in the microhole also plays a role in the spreading of water droplets by hindering the wetting transition from CB wetting to Wenzel wetting.

Clinical factors associated with postoperative hydronephrosis after ureteroscopic lithotripsy.

PURPOSE: This study aimed to determine the predictors of ipsilateral hydronephrosis after ureteroscopic lithotripsy for ureteral calculi. MATERIALS AND METHODS: From January 2010 to December 2014, a total of 204 patients with ureteral calculi who underwent ureteroscopic lithotripsy were reviewed. Patients with lack of clinical data, presence of ureteral rupture, and who underwent simultaneous percutaneous nephrolithotomy (PNL) were excluded. Postoperative hydronephrosis was determined via computed tomographic scan or renal ultrasonography, at 6 months after ureteroscopic lithotripsy. Multivariable analysis was performed to determine clinical factors associated with ipsilateral hydronephrosis. RESULTS: A total of 137 patients were enrolled in this study. The mean age of the patients was 58.8±14.2 years and the mean stone size was 10.0±4.6 mm. The stone-free rate was 85.4%. Overall, 44 of the 137 patients (32.1%) had postoperative hydronephrosis. Significant differences between the hydronephrosis and nonhydronephrosis groups were noted in terms of stone location, preoperative hydronephrosis, impacted stone, operation time, and ureteral stent duration (all, p<0.05). On multivariable analysis, increasing preoperative diameter of the hydronephrotic kidney (adjusted odds ratio [OR], 1.21; 95% confidence interval [CI], 1.12-1.31; p=0.001) and impacted stone (adjusted OR, 3.01; 95% CI, 1.15-7.61; p=0.031) independently predicted the occurrence of postoperative hydronpehrosis. CONCLUSIONS: Large preoperative diameter of the hydronephrotic kidney and presence of impacted stones were associated with hydronephrosis after ureteroscopic stone removal. Therefore, patients with these predictive factors undergo more intensive imaging follow-up in order to prevent renal deterioration due to postoperative hydronephrosis.

Cell Migration According to Shape of Graphene Oxide Micropatterns.

Photolithography is a unique process that can effectively manufacture micro/nano-sized patterns on various substrates. On the other hand, the meniscus-dragging deposition (MDD) process can produce a uniform surface of the substrate. Graphene oxide (GO) is the oxidized form of graphene that has high hydrophilicity and protein absorption. It is widely used in biomedical fields such as drug delivery, regenerative medicine, and tissue engineering. Herein, we fabricated uniform GO micropatterns via MDD and photolithography. The physicochemical properties of the GO micropatterns were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman spectroscopy. Furthermore, cell migration on the GO micropatterns was investigated, and the difference in cell migration on triangle and square GO micropatterns was examined for their effects on cell migration. Our results demonstrated that the GO micropatterns with a desired shape can be finely fabricated via MDD and photolithography. Moreover, it was revealed that the shape of GO micropatterns plays a crucial role in cell migration distance, speed, and directionality. Therefore, our findings suggest that the GO micropatterns can serve as a promising biofunctional platform and cell-guiding substrate for applications to bioelectric devices, cell-on-a-chip, and tissue engineering scaffolds.

Persistent genital swelling after hydrocele ligation in a patient receiving continuous ambulatory peritoneal dialysis.

We report a case of genital swelling in a patient receiving continuous ambulatory peritoneal dialysis. A physical examination did not identify any defect. Ultrasonography revealed a large hydrocele, and surgical repair brought resolution of the genital swelling. Two months later, however, the genital swelling had recurred and was not improved until peritoneal dialysis was replaced by hemodialysis 3 months later.

Clinical efficacy and safety in children with vesicoureteral reflux of a single injection of two different bulking agents--polydimethylsiloxane (Macroplastique) or dextranomer/hyaluronic acid copolymer (Deflux): a short-term prospective comparative study.

PURPOSE: To compare the clinical efficacy and safety in children with vesicoureteral reflux (VUR) of a single injection of two different bulking agents: polydimethylsiloxane (Macroplastique) or dextranomer/hyaluronic acid copolymer (Deflux). METHODS: A total of 73 patients (106 renal units, 41 boys and 32 girls) aged 2-15 years (mean age, 34.5 months) were included. A single subureteral injection of either Macroplastique or Deflux was performed in 37 children (55 ureters) and 36 children (51 ureters), respectively. VUR was grade II in 34 ureterorenal units, grade III in 23, grade IV in 31, and grade V in 18 ureterorenal units. RESULTS: Overall, the reflux was corrected in 84 of the renal units (86%) with one injection. The correction rates, according to the reflux grade, were 91, 91, 83, and 72% for grades II-V, respectively. At the 3-month follow-up visit, reflux was corrected in 48 (87%) of 55 refluxing ureters in the Macroplastique group and in 43 (84%) of 51 refluxing ureters in the Deflux group. CONCLUSIONS: A single subureteral injection of either Macroplastique or Deflux is an effective treatment modality for children with VUR. The procedure was well tolerated, safe, and associated with low morbidity.

Is a decreased serum testosterone level a risk factor for prostate cancer? A cohort study of korean men.

PURPOSE: To investigate patients who had transrectal ultrasonography (TRUS)-guided prostate biopsy to define the role of the serum testosterone level in predicting prostate cancer risk and its association with a high Gleason score. MATERIALS AND METHODS: A total of 568 patients who underwent prostate biopsy were entered in this study. We divided the patients into two groups according to serum testosterone level (median level, 3.85 ng/ml): the high-testosterone group (n=285) and the low-testosterone group (n=283). Multivariate regression analysis was used to define the effect of age, prostate volume, serum prostate-specific antigen (PSA) level and PSA density, and serum testosterone level on the risk of prostate cancer and a high Gleason score. RESULTS: Baseline characteristics did not differ significantly between the two groups. Compared with the high-testosterone group, the low-testosterone group had a significantly higher prostate cancer incidence (38.9% vs. 29.5%, p=0.018). Factors associated with an increased risk of prostate cancer were increased age (odds ratio [OR]=1.08, 95% confidence interval [CI]=1.25-3.16, p=0.001), a high serum PSA level (OR=3.35, 95% CI=2.63-4.25, p=0.001), a low prostate volume (OR=0.183, 95% CI=0.11-0.30, p=0.001), and a low serum testosterone level (OR=1.99, 95% CI=1.25-3.16, p=0.001). Among these, only the serum PSA level was a strong predictor of high-grade prostate cancer (Gleason score ≥7) (OR=2.19, 95% CI=1.57-2.95, p=0.001). CONCLUSIONS: Patients with lower levels of serum testosterone had a higher risk of prostate cancer than did patients with high serum testosterone. Even though a lower serum testosterone level was a predictor of prostate cancer risk, it was not associated with an increased risk of high-grade prostate cancer.