Effects of boron nitride nanotube content on waterborne polyurethane-acrylate composite coating materials.

Waterborne polyurethane-acrylate (WPUA) is a promising eco-friendly material for adhesives and coatings such as paints and inks on substrates including fibers, leather, paper, rubber, and wood. Recently, WPUA and its composites have been studied to overcome severe problems such as poor water resistance, mechanical properties, chemical resistance, and thermal stability. In this study, composite films consisting of WPUA and rod-type boron nitride nanotubes (BNNTs), which have excellent intrinsic properties including high mechanical strength and chemical stability, were investigated. Specifically, BNNT/WPUA composite films were synthesized by mixing aqueous solutions of BNNT and WPUA via facile mechanical agitation without any organic solvents or additives, and the optimal content of BNNTs was determined. For the 2.5 wt% BNNT/WPUA composite, the BNNTs were found to be well distributed in the WPUA matrix and this material showed the overall best performance in terms of water resistance, thermal conductivity, and corrosion resistance. Owing to these advantageous properties and their environmentally friendly nature, BNNT/WPUA composite coating materials are expected to be applicable in a wide variety of industries.

Ultrafast charge and discharge biscrolled yarn supercapacitors for textiles and microdevices.

Flexible, wearable, implantable and easily reconfigurable supercapacitors delivering high energy and power densities are needed for electronic devices. Here we demonstrate weavable, sewable, knottable and braidable yarns that function as high performance electrodes of redox supercapacitors. A novel technology, gradient biscrolling, provides fast-ion-transport yarn in which hundreds of layers of conducting-polymer-infiltrated carbon nanotube sheet are scrolled into ~20 µm diameter yarn. Plying the biscrolled yarn with a metal wire current collector increases power generation capabilities. The volumetric capacitance is high (up to ~179 F cm(-3)) and the discharge current of the plied yarn supercapacitor linearly increases with voltage scan rate up to ~80 V s(-1) and ~20 V s(-1) for liquid and solid electrolytes, respectively. The exceptionally high energy and power densities for the complete supercapacitor, and high cycle life that little depends on winding or sewing (92%, 99% after 10,000 cycles, respectively) are important for the applications in electronic textiles.

Free-standing nanocomposites with high conductivity and extensibility.

The prospect of electronic circuits that are stretchable and bendable promises tantalizing applications such as skin-like electronics, roll-up displays, conformable sensors and actuators, and lightweight solar cells. The preparation of highly conductive and highly extensible materials remains a challenge for mass production applications, such as free-standing films or printable composite inks. Here we present a nanocomposite material consisting of carbon nanotubes, ionic liquid, silver nanoparticles, and polystyrene-polyisoprene-polystyrene having a high electrical conductivity of 3700 S cm(-1) that can be stretched to 288% without permanent damage. The material is prepared as a concentrated dispersion suitable for simple processing into free-standing films. For the unstrained state, the measured thermal conductivity for the electronically conducting elastomeric nanoparticle film is relatively high and shows a non-metallic temperature dependence consistent with phonon transport, while the temperature dependence of electrical resistivity is metallic. We connect an electric fan to a DC power supply using the films to demonstrate their utility as an elastomeric electronic interconnect. The huge strain sensitivity and the very low temperature coefficient of resistivity suggest their applicability as strain sensors, including those that operate directly to control motors and other devices.

Electrically, chemically, and photonically powered torsional and tensile actuation of hybrid carbon nanotube yarn muscles.

Artificial muscles are of practical interest, but few types have been commercially exploited. Typical problems include slow response, low strain and force generation, short cycle life, use of electrolytes, and low energy efficiency. We have designed guest-filled, twist-spun carbon nanotube yarns as electrolyte-free muscles that provide fast, high-force, large-stroke torsional and tensile actuation. More than a million torsional and tensile actuation cycles are demonstrated, wherein a muscle spins a rotor at an average 11,500 revolutions/minute or delivers 3% tensile contraction at 1200 cycles/minute. Electrical, chemical, or photonic excitation of hybrid yarns changes guest dimensions and generates torsional rotation and contraction of the yarn host. Demonstrations include torsional motors, contractile muscles, and sensors that capture the energy of the sensing process to mechanically actuate.

Synergistic toughening of composite fibres by self-alignment of reduced graphene oxide and carbon nanotubes.

The extraordinary properties of graphene and carbon nanotubes motivate the development of methods for their use in producing continuous, strong, tough fibres. Previous work has shown that the toughness of the carbon nanotube-reinforced polymer fibres exceeds that of previously known materials. Here we show that further increased toughness results from combining carbon nanotubes and reduced graphene oxide flakes in solution-spun polymer fibres. The gravimetric toughness approaches 1,000 J g(-1), far exceeding spider dragline silk (165 J g(-1)) and Kevlar (78 J g(-1)). This toughness enhancement is consistent with the observed formation of an interconnected network of partially aligned reduced graphene oxide flakes and carbon nanotubes during solution spinning, which act to deflect cracks and allow energy-consuming polymer deformation. Toughness is sensitive to the volume ratio of the reduced graphene oxide flakes to the carbon nanotubes in the spinning solution and the degree of graphene oxidation. The hybrid fibres were sewable and weavable, and could be shaped into high-modulus helical springs.

Hybrid nanomembranes for high power and high energy density supercapacitors and their yarn application.

We report mechanically robust, electrically conductive, free-standing, and transparent hybrid nanomembranes made of densified carbon nanotube sheets that were coated with poly(3,4-ethylenedioxythiophene) using vapor phase polymerization and their performance as supercapacitors. The hybrid nanomembranes with thickness of ~66 nm and low areal density of ~15 µg/cm(2)exhibited high mechanical strength and modulus of 135 MPa and 12.6 GPa, respectively. They also had remarkable shape recovery ability in liquid and at the liquid/air interface unlike previous carbon nanotube sheets. The hybrid nanomembrane attached on a current collector had volumetric capacitance of ~40 F/cm(3) at 100 V s(-1) (~40 and ~80 times larger than that of onion-like carbon measured at 100 V s(-1) and activated carbon measured at 20 V s(-1), respectively), and it showed rectangular shapes of cyclic voltammograms up to ~5 V s(-1). High mechanical strength and flexibility of the hybrid nanomembrane enabled twisting it into microsupercapacitor yarns with diameters of ~30 µm. The yarn supercapacitor showed stable cycling performance without a metal current collector, and its capacitance decrease was only ~6% after 5000 cycles. Volumetric energy and power density of the hybrid nanomembrane was ~70 mWh cm(-3) and ~7910 W cm(-3), and the yarn possessed the energy and power density of ~47 mWh cm(-3) and ~538 W cm(-3).

Torsional carbon nanotube artificial muscles.

Rotary motors of conventional design can be rather complex and are therefore difficult to miniaturize; previous carbon nanotube artificial muscles provide contraction and bending, but not rotation. We show that an electrolyte-filled twist-spun carbon nanotube yarn, much thinner than a human hair, functions as a torsional artificial muscle in a simple three-electrode electrochemical system, providing a reversible 15,000° rotation and 590 revolutions per minute. A hydrostatic actuation mechanism, as seen in muscular hydrostats in nature, explains the simultaneous occurrence of lengthwise contraction and torsional rotation during the yarn volume increase caused by electrochemical double-layer charge injection. The use of a torsional yarn muscle as a mixer for a fluidic chip is demonstrated.

The fabrication of polyaniline/single-walled carbon nanotube fibers containing a highly-oriented filler.

Highly uniform composite nanofibers composed of well-oriented single-walled carbon nanotubes (SWCNTs) wrapped in a conducting polymer have been fabricated using electrospinning. Water-soluble polyaniline (WS-PANI) was used as a conducting material to improve the processability during electrospinning. The WS-PANI formed a homogeneous dispersion with the SWCNTs and poly(vinyl alcohol), and good compatibility of the WS-PANI with the SWCNTs was demonstrated by data showing interactions between two components and the wrapping of the SWCNTs by the WS-PANI. Through transmission electron microscopy, atomic force microscopy, and polarized Raman spectroscopy, we confirmed that the WS-PANI plays an important role as a conducting polymer matrix to achieve aligned SWCNTs in composite nanofibers and to form uniform nanofibers.

Controlled magnetic nanofiber hydrogels by clustering ferritin.

We have fabricated biocompatible nanofiber hydrogels with diverse sizes of ferritin clusters according to the mixing temperature of solutions employing electrospinning. Poly(vinyl alcohol) (PVA) was used as a polymeric matrix for fabricating nanocomposites. By thermal means we controlled the interaction between the host PVA hydrogel and the protein shell on ferritin bionanoparticles to vary the size and concentration of ferritin clusters. The clustering of ferritin was based on the partial unfolding of a protein shell of ferritin. By studying the magnetic properties of the PVA/ferritin nanofibers according to the mixing temperature of the PVA/ferritin solutions, we confirmed that the clustering process of the ferritin was related to changes in the superparamagnetic properties and magnetic resonance imaging (MRI) contrast of the PVA/ferritin nanofibers. PVA/ferritin nanofiber hydrogels with diverse spatial distributions of ferritin nanoparticles are applicable as MRI-based noninvasive detectable cell culture scaffolds and as artificial muscles because of their improved superparamagnetic properties.

Alignment of polymeric nanofibers using a filtering effect.

One-dimensional nanostructures that play an important role as ideal building blocks for hierarchical assemblies, such as nanowires, nanofibers, and nanotubes, have attracted much attention because of their significance for fundamental investigations and their peculiar electrical, optical, and mechanical properties. In this work, by adding auxiliary parallel electrodes to a previously known electrospinning process, we have developed an electrospinning technology that can achieve the spatial alignment of nanofibers on various types of electrodes. The auxiliary electrodes played an important role as a filter, because any disordered nanofibers that can potentially disrupt the orientation were deposited on them. In addition to their filtering capability, the auxiliary parallel electrodes elongated any nonfiltered nanofibers into a long and straight configuration. Using our method, we have achieved better fiber alignment without the aid of elaborate controls for the flow rate or deposition time.

The fabrication of polymeric nanochannels by electrospinning.

Polymeric nanochannels have been fabricated using a cost-effective, fast, one-step method involving the collision of nanosized jets during electrospinning. The nanochannels had a uniform U-shaped cross-section, with a height below 100 nm and lengths around 1 mm. It was explained that the strength of the electric field had an important effect on the formation of the nanochannels. An adhesion test on the nanochannels using the lateral force mode of an atomic force microscope showed that the nanochannels formed by the jet impingement adhered well to a surface.

Electrical properties of polyaniline and multi-walled carbon nanotube hybrid fibers.

We have fabricated for the first time one-dimensional multiwalled carbon nanotube (MWNT) nanocomposite fibers with improved electrical properties using electrospinning. Polyaniline (PANi) and poly(ethylene oxide) (PEO) were used as a conducting and a nonconducting matrix, respectively, for hybrid nanofibers including MWNTs. The hybrid nanofibers fabricated by electrospinning had a length of several centimeters and a diameter ranging from approximately 100 nm to approximately 1 microm. Transmission electron microscopic analysis confirmed that the MWNTs were successfully oriented along the fiber axis without any severe aggregation during electrospinning. The hybrid nanofibers showed an enhanced electrical conductance with increasing MWNT content up to 0.5 wt%, and compared to PANi/PEO fibers, they also showed a stable linear ohmic behavior. These hybrid conducting nanofibers can be applied to chemical and biosensors that require a high sensitivity.