ABSTRACT
This paper describes the fabrication of pentacene thin-film transistors (TFTs) with an organic/inorganic hybrid gate dielectric, consisting of cross-linked poly(4-vinylphenol) (PVP) and Bi5Nb3O15. A 300-nm-thick Bi5Nb3O15 dielectric film, grown at room temperature, exhibits a high dielectric constant (high-k) value of 40 but has an undesirable interface with organic semiconductors (OSC). To form better interfaces with OSC, a cross-linked PVP dielectric was stacked on the Bi5Nb3O15 dielectric. It is shown that, with the introduction of a hybrid dielectric, our devices not only can be operated at a low voltage (- -5 V) but also have improved electrical characteristics and photoresponse, including a field-effect mobility of 0.72 cm2/V x s, current sub-threshold slopes of 0.29 V/decade, and a photoresponse of 4.84 at a gate bias V(G) = 0 V under 100 mW/cm2 AM 1.5 illumination.
ABSTRACT
This paper presents the latest results in the use of soluble materials, such as organic semiconductors (OSCs) and gate-dielectrics, for simplified processing of organic thin film transistors (OTFTs). In this work, the fabrication of a solution-processed OTFT, with 6,13-bis(triisopropylsilylethynyl)pentacene (TIPS-pentacene) and TIPS-pentacene mixed with poly(4-vinylbiphenyl) (PVBP) as the OSC, and propyleneglycolmonomethyletheracetate (PGMEA) as the gate-dielectric, is described. From electrical measurements, we observed exemplary I-V characteristics for these TFTs. Device performance characteristics have been obtained, including the charge carrier mobility (micro) of 1.47 x 10(-2) cm2Ns, threshold voltage (V(T)) of -11.36 V, current on/off ratio (I(ON/OFF)) of 1.08 x 10(4), sub-threshold swing (SS) of 2.13 V/decade for an OTFT with PVBP blended TIPS-pentacene and micro of 1.39 x 10(-4) cm2/Vs, V(T) of 0.7 V, I(ON/OFF) of 1.64 x 10(3), SS of 4.21 V/decade for an OTFT without polymer binder, individually.
ABSTRACT
The amorphous Bi(5)Nb(3)O(15) film grown at room temperature under an oxygen-plasma sputtering ambient (BNRT-O(2) film) has a hydrophobic surface with a surface energy of 35.6 mJ m(-2), which is close to that of the orthorhombic pentacene (38 mJ m(-2)), resulting in the formation of a good pentacene layer without the introduction of an additional polymer layer. This film was very flexible, maintaining a high capacitance of 145 nF cm(-2) during and after 10(5) bending cycles with a small curvature radius of 7.5 mm. This film was optically transparent. Furthermore, the flexible, pentacene-based, organic thin-film transistors (OTFTs) fabricated on the poly(ether sulfone) substrate at room temperature using a BNRT-O(2) film as a gate insulator exhibited a promising device performance with a high field effect mobility of 0.5 cm(2) V(-1) s(-1), an on/off current modulation of 10(5), and a small subthreshold slope of 0.2 V decade(-1) under a low operating voltage of -5 V. This device also maintained a high carrier mobility of 0.45 cm(2) V(-1 )s(-1) during the bending with a small curvature radius of 9 mm. Therefore, the BNRT-O(2) film is considered a promising material for the gate insulator of the flexible, pentacene-based OTFT.
