A novel derivatization-free method of formaldehyde and propylene glycol determination in hydrogels by liquid chromatography with refractometric detection.

The paper describes the development and validation of a new derivatization-free liquid chromatography method for simultaneous determination of propylene glycol and formaldehyde in the formulations containing formaldehyde-releasing preservative. Highly swollen hydrogel made of poly(ethylene glycol)-protein conjugates was taken as a model formulation for integration of the propylene glycol and the diazolydinyl urea as formaldehyde releaser. The method is shown to be simple and selective and, more importantly, allows determining an existing level of formaldehyde at the moment of analysis instead of all available formaldehyde that might be released during chemical derivatization. After liquid extraction the propylene glycol (PG) and formaldehyde (FA) amounts are determined chromatographically on a Shodex SH 1011 ligand-exchange column using 0.01 M sulfuric acid mobile phase, a flow rate of 1.0 ml/min and RI detection. The assay is validated showing good linearity, precision, and accuracy. The limits of detection of formaldehyde and propylene glycol in the analyzed solutions were estimated to be 25 ng and 87 ng, respectively. This analytical assay is considered useful for product stability studies and in developing new formaldehyde releaser-containing formulations where the concentration of formaldehyde is a presumable subject of labeling requirements. This method can also provide a rapid and convenient alternative to gas chromatography method of propylene glycol quantification.

Solid emulsion gel as a novel construct for topical applications: synthesis, morphology and mechanical properties.

A series of the solid emulsion gels with the oil volume fraction in the range of 0-50% were synthesized through a polycondensation reaction between activated p-nitrophenyl carbonate poly(ethylene glycol) and protein-stabilized oil-in-water emulsions. The resultant structures were investigated in terms of swelling behavior, composition, morphology, mechanical and skin hydration properties. Solid emulsions gels share the properties of both hydrogel and emulsion. Similar to the classical hydrogel, the SEG swells in water up to equilibrium swelling degree, which decreases as the oil volume fraction increases, and comprises immobilized drops of protein-stabilized oil. The impregnation of the oil phase is found to reduce tensile stiffness of the material, but improves material's extensibility. The mechanical properties of the constructs (Young moduli in the range of 9-15 kPa and the elongation at break of 120-220%) are interpreted according to the "rule of elasticity mixture" that considers the elasticity of the composite material to be a sum of the contributions from individual components, i.e. hydrogel and dispersed oil drops. An idealized model that takes into account the history of the material preparation has been proposed to explain the improved extensibility of the constructs. The results of the mechanical tests, equilibrium swelling, and the skin hydration effect of the solid emulsion gels in vivo are discussed from the perspective of the biomedical applications of the solid emulsion gels, in particular, for the transdermal delivery of hydrophilic and lipophilic drugs.

Solid emulsion gel as a vehicle for delivery of polyunsaturated fatty acids: implications for tissue repair, dermal angiogenesis and wound healing.

The paper describes preparation and biological characterization of the solid hybrid biomaterial that was designed for cell-targeted lipid delivery in healing tissues. The material referred to as 'solid emulsion gel' combines a protein-stabilized lipid emulsion and a hydrogel structure in a single compartment. The potential of the omega-3 (n-3)-fatty acids rich solid emulsion gel for tissue repair applications was investigated at the macro-, micro-, molecular and gene expression levels, using human fibroblasts and endothelial cells and a porcine model of full-thickness wounds. Being non-cytotoxic in vitro and in vivo, the biomaterial was found to affect cell metabolism, modulate expression of certain genes, stimulate early angiogenesis and promote wound repair in vivo. The neovascular response in vivo was correlated with upregulated expression of the genes involved in lipid transport (e.g. adipophilin), anti-apoptosis (e.g. heat shock proteins, haem oxygenase 1) and angiogenesis (vascular endothelial growth factor, placental growth factor). Collectively, the results of this study provide first evidence that the angiogenic response provided by solid emulsion gel-mediated delivery of n-3 fatty acids is an alternative to the topical administration of exogenous growth factors or gene therapy, and can be advantageously used for the stimulation of tissue repair in complex wounds.

Mechanical and microstructural properties of hybrid poly(ethylene glycol)-soy protein hydrogels for wound dressing applications.

Biomimetic hydrogel made of poly(ethylene glycol) and soy protein with a water content of 96% has been developed for moist wound dressing applications. In this study, such hybrid hydrogels were investigated by both tensile and unconfined compression measurements in order to understand the relationships between structural parameters of the network, its mechanical properties and protein absorption in vitro. Elastic moduli were found to vary from 1 to 17 kPa depending on the composition, while the Poisson's ratio (approximately 0.18) and deformation at break (approximately 300%) showed no dependence on this parameter. Further calculations yielded the crosslinking concentration, the average molecular weight between crosslinks (M(C)) and the mesh size. The results show that reactions between PEG and protein create polymeric chains comprising molecules of PEG and protein fragments between crosslinks. M(C) is three times higher than that expected for a "theoretical network." On the basis of this data, we propose a model for the 3D network of the hydrogel, which is found to be useful for understanding drug release properties and biomedical potential of the studied material.

Inflammatory inert poly(ethylene glycol)--protein wound dressing improves healing responses in partial- and full-thickness wounds.

In this study, a novel soft hydrogel system based on the poly(ethylene glycol)-protein conjugates was evaluated as an occlusive wound dressing material. The hydrogel material, referred by the name of BioAquacare, contains up to 96% of the liquid and is formulated with phosphate-buffered saline and safe preservative to control bacterial load in the open wounds. Performance of the BioAquacare as a wound dressing material was assessed in partial- and full-thickness wounds in pigs. Wound analysis comprised macroscopic determination of the wound size, histological examination of the healing tissues and biochemical characterisation of wound exudates. The wounds treated with BioAquacare healed without any signs of inflammation, skin irritation, oedema or erythema. Cellular composition of the reepithelialised wounds was very similar to that of the normal skin, with a well-developed stratum corneum and epithelial layer. It was observed that BioAquacare plays the role of a liquid compartment, which provides pronounced hydration effect and helps maintain a natural moist environment of the healing tissues. BioAquacare showed relatively low protein-absorbing activity, absorbing predominantly low-molecular-weight molecules, including interleukin (IL)-1beta, IL-6, transforming growth factor-beta1 and products of haemoglobin degradation. It is concluded that application of the moist BioAquacare dressing promotes fast reepithelialisation by creating favourable environment for keratinocytes proliferation and it also reduces scarring. The results show that BioAquacare can be considered as a safe, biocompatible and inflammatory inert wound dressing material.

Structure-property relationships in poly(ethylene glycol)-protein hydrogel systems made from various proteins.

A series of poly(ethylene glycol)-protein hydrogels were synthesized with different proteins, and the resultant structures were characterized in terms of swelling behavior and mechanical, optical, and drug release properties. Irrespectively of the protein involved in polymerization with poly(ethylene glycol), all studied systems were found to be loosely cross-linked networks, where both polymer and protein are completely solvated, enabling as high as 96% water content. Changes in the apparent transparency of the hydrogels synthesized with different proteins were attributed to the ability of the protein component to self-associate via hydrophobic interactions. The polyelectrolyte nature of the protein component governs the pH responsiveness of the network, which manifested itself in a pH-dependent mechanism of swelling and drug release. It was demonstrated that there is great opportunity to modulate the final characteristics of the hydrogel system to fit the need of specific biomedical application.

Current knowledge on biosynthesis, biological activity, and chemical modification of the exopolysaccharide, pullulan.

The article presents an overview of the latest advances in investigations of the biosynthesis, molecular properties, and associated biological activity of pullulan. The literature survey on the pullulan biosynthesis is intended to illustrate how the great variety of environmental conditions as well as variability in strain characteristics influences the metabolic pathways of the pullulan formation and effects structural composition of the biopolymer. Molecular properties of pullulan as alpha-(1-->4)- and alpha-(1-->6)-glucan are discussed in terms of similarities with amylose and dextran structures, and an emphasis is made on the inherent biological activity of pullulan molecules. The author also attempts to summarize the concepts, options, and strategies in chemical modification of the biopolymer and to delineate future prospects in designing new biologically active derivatives.

Determination of structural peculiarities of dexran, pullulan and gamma-irradiated pullulan by Fourier-transform IR spectroscopy.

Deconvoluted IR-absorbance spectra of dextran, pullulan and gamma-irradiated pullulan were analyzed in order to find the most specific spectral peculiarities that allow one to obtain information about the structure and conformation of these macromolecules in solvents that exhibit different influences on the system of intra- and intermolecular interactions. The changes in intensity and width of the IR bands at about 1040, 1020 and, in the case of pullulan, also at 996 cm(-1), were related to changes in conformation and short-range interactions of the polysaccharides. Furthermore, certain bands within the 1200-900 cm(-1) region were considered as a characteristic for the type of glycosidic linkage. The results of the FTIR spectroscopy study allowed one to suggest a predominant cleavage of the alpha-(1-->4) linkages upon the radiation-chemical destruction of pullulan.