Fluorine-Terminated Polycrystalline Diamond Solution-Gate Field-Effect Transistor Sensor with Smaller Amount of Unexpectedly Generated Fluorocarbon Film Fabricated by Fluorine Gas Treatment.

In this study, a partially fluorine-terminated solution-gate field-effect transistor sensor with a smaller amount of unexpectedly generated fluorohydrocarbon film on a polycrystalline diamond channel is described. A conventional method utilizing inductively coupled plasma with fluorocarbon gas leads the hydrogen-terminated diamond to transfer to a partially fluorine-terminated diamond (C-F diamond); an unexpected fluorohydrocarbon film is formed on the surface of the diamond. To overcome this issue, we newly applied fluorine gas for the fluoridation of the diamond. Analytical results of X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry suggest that the fluorocarbon film does not exist or only a smaller amount of fluorocarbon film exists on the diamond surface. Conversely, the C-F diamond fabricated by the conventional method of inductively coupled plasma with a perfluoropropane gas (C3F8 gas) source possesses a certain amount of fluorocarbon film on its surface. The C-F diamond with a smaller amount of unexpectedly generated fluorohydrocarbon film possesses nearly ideal drain-source-voltage vs. gate-source-current characteristics, corresponding to metal-oxide-silicon semiconductor field-effect transistor theory. The results indicate that the fluorine gas (F2 gas) treatment proposed in this study effectively fabricates a C-F diamond sensor without unexpected semiconductor damage.

Deoxyribonucleic-acid-sensitive Polycrystalline Diamond Solution-gate Field-effect Transistor with a Carboxyl-terminated Boron-doped Channel.

This paper describes a deoxyribonucleic-acid-sensitive electrolyte solution-gate field-effect transistor (SGFET) sensor utilizing a partial carboxyl-terminated boron-doped polycrystalline diamond surface as a linker to connect a deoxyribonucleic acid (DNA) probe. A high density of carboxyl termination on the polycrystalline diamond surface that was employed as a FET channel was achieved using a vacuum ultraviolet system with oxygen gas. A single-stranded DNA probe was immobilized on the polycrystalline diamond channel via amino coupling. The current-voltage characteristics of the polycrystalline diamond SGFET sensor was examined with bias voltages within its potential voltage window. The characteristics of the drain-source current verses the drain-source voltage showed a pinch-off, a shift voltage of up to 40 mV with a coefficient of variation of 4 - 11% was obtained between hybridization and denaturation. In addition, a single nucleotide mutation of DNA sequence was selectively recognized by the shift voltage up to ca. 10 mV.

Role of Carboxyl and Amine Termination on a Boron-Doped Diamond Solution Gate Field Effect Transistor (SGFET) for pH Sensing.

In this paper, we report on the effect of carboxyl- and amine terminations on a boron-doped diamond surface (BDD) in relation to pH sensitivity. Carboxyl termination was achieved by anodization oxidation in Carmody buffer solution (pH 7). The carboxyl-terminated diamond surface was exposed to nitrogen radicals to generate an amine-terminated surface. The pH sensitivity of the carboxyl- and amine-terminated surfaces was measured from pH 2 to pH 12. The pH sensitivities of the carboxyl-terminated surface at low and high pH are 45 and 3 mV/pH, respectively. The pH sensitivity after amine termination is significantly higher—the pH sensitivities at low and high pH are 65 and 24 mV/pH, respectively. We find that the negatively-charged surface properties of the carboxyl-terminated surface due to ionization of ⁻COOH causes very low pH detection in the high pH region (pH 7⁻12). In the case of the amine-terminated surface, the surface properties are interchangeable in both acidic and basic solutions; therefore, we observed pH detection at both low and high pH regions. The results presented here may provide molecular-level understanding of surface properties with charged ions in pH solutions. The understanding of these surface terminations on BDD substrate may be useful to design diamond-based biosensors.

Polycrystalline Boron-doped Diamond Electrolyte-solution-gate Field-effect Transistor Applied to the Measurement of Water Percentage in Ethanol.

A polycrystalline diamond electrolyte-solution-gate field-effect transistor (BDD-SGFET) was successfully applied to the analysis of water content in ethanol. Due to the use of a no-gate-insulator FET, the developed sensor showed a four-times-faster response than the conventional Si-FET, and a ten-times-faster response than a glass electrode. The output voltage showed good linearity with respect to the water content. This result is of practical importance because the traditional water content measurement methods are impractical due to their slow response.

An All-Solid-State pH Sensor Employing Fluorine-Terminated Polycrystalline Boron-Doped Diamond as a pH-Insensitive Solution-Gate Field-Effect Transistor.

A fluorine-terminated polycrystalline boron-doped diamond surface is successfully employed as a pH-insensitive SGFET (solution-gate field-effect transistor) for an all-solid-state pH sensor. The fluorinated polycrystalline boron-doped diamond (BDD) channel possesses a pH-insensitivity of less than 3mV/pH compared with a pH-sensitive oxygenated channel. With differential FET (field-effect transistor) sensing, a sensitivity of 27 mv/pH was obtained in the pH range of 2-10; therefore, it demonstrated excellent performance for an all-solid-state pH sensor with a pH-sensitive oxygen-terminated polycrystalline BDD SGFET and a platinum quasi-reference electrode, respectively.

[The action of Amagasaki City Health Center to the train derailment accident on the Japan Railway Fukuchiyama Line].

OBJECTIVES: To examine and describe the reactions of Amagasaki City Health Center to the train derailment accident that occurred on April 25th, 2005 on the Japan Railway (JR) Fukuchiyama Line in order to provide useful information for health centers to help them deal with such catastrophic disasters in the future. METHODS: Each day after the accident reactions and actions were examined and described. They included mental health care provided by the health center for the inhabitants of the condominium building into which the derailed train had crashed, as well as the volunteers who participated in the rescue work. Health checkups were also provided for the latter. RESULTS: Actions directly related to the rescue were continued by the health center for four days after the accident. The mainly consisted of the following. The health center asked hospitals to input information concerming their ability to respond to the emergency situation into the Hyogo Emergency Medical Information System. A relief party was organized by the health center staff and engaged in the rescue and on-site rescue triage. The health center slso coordinated the mortuary work. Two days after the accident, "postmortem triage," to insure that bodies were taken directly to a mortuary after death certification by a physician was needed on site after rescue triage was concluded. The health center confirmed all information for the passengers' safety. The rescue volunteers and the nearby inhabitants who were affected consulted with the person in charge of mental health care provided by the health center from immediately after the accicent for a period of five months to September 30. Health checkups for rescue volunteers were conducted for infections and post-traumatic stress disorder. CONCLUSIONS: This JR accident was characterized by many civilian volunteers engaged in rescue over the relatively long period of rescue of four days. Mental health care and health checkups were needed for civililian volunteers and were therefore provided by the health center. During the four days of rescue, triage was begun immediately after the accident and subsequent postmortem triage was also required.

High-throughput protein digestion by trypsin-immobilized monolithic silica with pipette-tip formula.

Based on the monolithic silica gel materials with hierarchical pore structure and on the SPE devices (MonoTip) developed thereof, a trypsin-immobilized monolithic silica in a pipette tip (MonoTip Trypsin) suitable for digesting proteins has been newly developed. The surface of monolithic silica fixed into the tip was chemically modified with trypsin via an aminopropyl group. Trypsin-immobilized monolith successfully performed a rapid digestion of reduced and alkylated proteins with only a few times pipetting operation for the pre-treatment procedure of chromatographic analysis. The novel solid-phase digestion tool using monolithic silica allows a high-throughput trypsin proteolysis of bio-substances in proteomics.

Development of miniaturized multi-channel high-performance liquid chromatography for high-throughput analysis.

We have developed miniaturized multi-channel high-performance liquid chromatography (HPLC) system. With this system, we can simultaneously separate multiple samples, using a single high-pressure gradient pump, a chip-based sample injection unit, a monolithic silica capillary column array, and a multi-channel UV detection unit based on fiber optics. The injection unit has a simplified structure composed of brass housing and a quartz microchip having microchannels and access ports, which enable a direct injection of sample to multi-channel by commercial multichannel micropipette. Moreover, that possesses a function of microvalve, and on-chip definition of sample injection plugs achieved with a cross channel injection method, providing each column of monolithic silica capillary array. The substances in channels were simultaneously detected with UV having multiple cells. Standard samples were analyzed for characterizing newly developed system, and sharp peaks were obtained with reproducibility data of < 0.9% (R.S.D.). Analysis of tryptic digestion of casein was also employed. These results show that the novel multi-channel HPLC system has the benefits for the high-throughput analysis in the post-genomic analysis/combinatorial chemistry.

Titania-coated monolithic silica as separation medium for high performance liquid chromatography of phosphorus-containing compounds.

A method of preparing titania-coated monolithic silica stationary phase has been developed to achieve liquid chromatographic separation of phosphorus-containing compounds, which have recently been attracting increasing attention in biochemical research. The titania-coated silica columns exhibited efficient separation with low pressure drop, which is a typical feature of monolithic structures, and also possessed phospho-selectivity, which is a unique property of the titania surface. The material characteristics of titania-coated monolithic silica were examined, and then resin-clad columns were applied to the HPLC analysis of phosphorylated compounds. Highly efficient separation of phosphorylated substances indicated that the novel titania-coated monolithic silica column will find applications as a useful tool in the field of biochemistry, especially in post-genomic analyses.

Phosphopeptide-selective column-switching RP-HPLC with a titania precolumn.

A methodology of phosphopeptide-selective analysis coupled with column-switching HPLC utilizing titania as precolumn media is presented. Phosphopeptides were selectively enriched on titania packing within a protein/peptide mixture without any additional procedure, and analyzed by column-switching high-performance liquid chromatography. First, phospho-compounds were separated from complex mixtures by trapping them under acidic conditions on a titania packing, where non-phosphorylated compounds were effused out of the precolumn. Subsequently, phospho-compounds were desorbed from the titania column under a specific condition and analyzed. The behavior of phospho-compounds on a titania surface, especially adsorption/desorption, was precisely examined and optimized. A phosphoric buffer was successively employed for the elution of phosphopeptides on a titania surface by competition with the free phosphate group. From the successes of a selective concentration/analysis of phosphopeptides with column-switching HPLC with a titania precolumn, a novel phosphopeptide-selective RP-HPLC analysis has been shown to have an application possibility as a tool for phosphoproteomics.

Development of a monolithic silica extraction tip for the analysis of proteins.

In proteomics, pre-treatment of sample is the most important procedure to remove the matrix for interfacing with mass spectrometry (MS). Additionally, for the samples with low concentration, the process of pre-concentration is required before MS analysis. We have newly developed solid-phase extraction (SPE) tool with pipette-tip shape for purification of bio-samples of various characteristics, utilizing monolithic silica gel as medium. The monolithic silica surface was modified with a C18 phase or coated with titania phase. A C18-bonded tip and a non-modified tip were used for sample concentration, desaltination and removal of detergents from sample. A titania-coated tip was also applied for purification and concentration of phosphorylated peptides. This novel pre-treatment method using monolithic silica extraction tip is much effective and suitable for protein analysis.

Failure of inactivated influenza A vaccine to protect healthy children aged 6-24 months.

BACKGROUND: The efficacy of inactivated influenza vaccine in healthy infants and children younger than 24 months has not been confirmed. The aim of the present study was to determine the prophylactic effect of inactivated influenza vaccine against influenza A in healthy children aged 6-24 months. METHODS: Healthy infants and young children (6-24 months old) were immunized by subcutaneous injection of inactivated influenza vaccine before influenza seasons. Age matched children were randomly assigned as the control. These children were followed up from January to April in each year (2000, 2001 and 2002). The attack rates of influenza A infection was compared and statistically assessed. RESULTS: The attack rate of influenza A virus infection in the vaccine group and the control group were 14.8% (n = 27) vs 12.5% (n = 32) in 2000 (P = 0.526); 2.8% (n = 72) vs 7.2% (n = 69) in 2001 (P = 0.203); and 3.4% (n = 52) vs 8.9% (n = 56) in 2002 (P = 0.205). The attack rates of influenza A between the two groups were not significantly different. CONCLUSIONS: Inactivated influenza vaccine did not reduce the attack rate of influenza A infection in 6-24 month old children.

Simple and comprehensive two-dimensional reversed-phase HPLC using monolithic silica columns.

Simple and comprehensive two-dimensional (2D)-HPLC was studied in a reversed-phase mode using monolithic silica columns for second-dimension (2nd-D) separation. Every fraction from the first column, 15 cm long (4.6-mm i.d.), packed with fluoroalkylsilyl-bonded (FR) silica particles, was subjected to the separation in the 2nd-D using one or two octadecylsilylated (C(18)) monolithic silica columns (4.6-mm i.d., 3 cm). Monolithic silica columns in the 2nd-D were eluted at a flow rate of up to 10 mL/min with separation time of 30 s that meets the fractionation every 15-30 s at the first dimension (1st-D) operated at a flow rate of 0.4-0.8 mL/min. Three cases were studied. (1) In the simplest scheme of 2D-HPLC, effluent of the 1st-D was directly loaded into an injector loop of 2nd-D HPLC for 28 s, and 2 s was allowed for injection. (2) Two six-port valves each having a sample loop were used to hold the effluent of the 1st-D alternately for 30 s for one 2nd-D column to effect comprehensive 2D-HPLC without the loss of 1st-D effluent. (3) Two monolithic silica columns were used for 2nd-D by using a switching valve and two sets of 2nd-D chromatographs separating each fraction of the 1st-D effluent with the two 2nd-D columns alternately. In this case, two columns of the same stationary phase (C(18)) or different phases, C(18) and (pentabromobenzyloxy)propylsilyl-bonded (PBB), could be employed at the 2nd-D, although the latter needed two complementary runs. The systems produced peak capacity of approximately 1000 in approximately 60 min in cases 1 and 2 and in approximately 30 min in case 3. The three stationary phases, FR, C(18), and PBB, showed widely different selectivity from each other, making 2D separations possible. The simple and comprehensive 2D-HPLC utilizes the stability and high efficiency at high linear velocities of monolithic silica columns.

Polydimethylsiloxane connection for quartz microchips in a high-pressure system.

An interconnecting technique, the "PDMS connection method", for quartz microchips in a high-pressure system is presented. The connection between quartz microchips is an essential technology for modular microfluidic devices, such as microchip-HPLC. PDMS was applied to the seal material, being spread on the seal side of the chips, and set into the metal housing. The characteristics of the PDMS connection method concerning pressure resistance and the extension of the peak were examined. The experimental results showed a good seal at 5 MPa, which seem to be sufficient for realizing microchip-HPLC utilizing a monolithic silica capillary column as a separation medium. The influence of the extra column effect on chromatographic separation was almost the same as in the case using a commercial union fitting. In addition, the PDMS connection enabled the detachability of chip-based modules with user-friendliness. Our experimental findings suggest that the novel PDMS connection method can possibly be applied as a generic technology in high-pressure microTAS.

Monolithic silica column for in-tube solid-phase microextraction coupled to high-performance liquid chromatography.

In-tube solid-phase microextraction (SPME) has successfully been coupled to capillary LC, and further an automated in-tube SPME system has been developed using a commercially available HPLC auto-sampler. However, an open tubular capillary column with a thick film of polymer (stationary phase) is unfavorable because the ratio of the surface area of coating layer contacted with sample solution to the volume of the capillary column is insufficient for mass transfer. A highly efficient SPME column is. therefore, required. We introduced a C18-bonded monolithic capillary column that was used for in-tube SPME. The column consisted of continuous porous silica having a double-pore structure. Both the through-pore and the meso-pore were optimized for in-tube SPME, and the optimized capillary column was connected to an HPLC injection valve for characterization. The results demonstrated that the pre-concentration efficiency is excellent compared with the conventional in-tube SPME. The novel method for both introduction and concentration of the samples was effective. satisfactory and suitable for use in the SPME medium.

Prophylactic effect of inactivated influenza vaccine on young children.

BACKGROUND: The effectiveness of inactivated influenza vaccine in healthy infants and young children has been controversial. The aim of this study was to determine the prophylactic effect of inactivated influenza vaccine in young children. METHODS: Eighty-six healthy infants and children younger than 7-years-old were immunized by a subcutaneous injection of inactivated influenza vaccine before the 1999/2000 influenza season. Ninety-four age-matched children were randomly assigned as the control. These children were followed-up from January to April, 2000. A diagnosis of influenza A virus infection was made rapidly by a positive result of the the enzyme immunoassay membrane test using enzyme-conjugated monoclonal antibodies specific for a conserved epitope of influenza A nucleoprotein. The incidence of influenza A infection was compared and statistically assessed. RESULTS: The prevalence of influenza A virus infection, diagnosed by the influenza A rapid detection test, was 5.8% in the vaccine group and 17.0% in the control group, that is significantly lower in the vaccine receiving group than the non-receiving group (P = 0.016). However, four out of five infected children in the vaccine group were younger than 2-years-old. CONCLUSION: We conclude that inactivated influenza vaccine reduces the incidence of influenza A virus infection in 2-6-year-old children.