Periodic Alignment of Binary Droplets via a Microphase Separation of a Tripolymer Solution under Tubular Confinement.

We report the spontaneous formation of a characteristic periodic pattern through the phase separation of a tripolymer solution comprising polyethylene-glycol (PEG)/dextran (DEX)/gelatin. When this tripolymer solution is introduced into a glass capillary with a PEG-coated inner surface, we observe the time-dependent growth of microphase separation. Remarkably, a self-organized, periodic alignment of DEX- and gelatin-rich microdroplets ensues, surrounded by a PEG-rich phase. This pattern demonstrates considerable stability, enduring for at least 8 h. The fundamental characteristics of the experimentally observed periodic alignment are successfully replicated via numerical simulations using a Cahn-Hilliard model underpinned by a set of simple, theoretically derived equations. We propose that this type of kinetically stabilized periodic patterning can be produced across a broad range of phase-separation systems by selecting appropriate boundary conditions such as at the surface within a narrow channel.

Droplet duos on water display pairing, autonomous motion, and periodic eruption.

Under non-equilibrium conditions, liquid droplets dynamically couple with their milieu through the continuous flux of matter and energy, forming active systems capable of self-organizing functions reminiscent of those of living organisms. Among the various dynamic behaviors demonstrated by cells, the pairing of heterogeneous cell units is necessary to enable collective activity and cell fusion (to reprogram somatic cells). Furthermore, the cyclic occurrence of eruptive events such as necroptosis or explosive cell lysis is necessary to maintain cell functions. However, unlike the self-propulsion behavior of cells, cyclic cellular behavior involving pairing and eruption has not been successfully modeled using artificial systems. Here, we show that a simple droplet system based on quasi-immiscible hydrophobic oils (perfluorodecalin and decane) deposited on water, mimics such complex cellular dynamics. Perfluorodecalin and decane droplet duos form autonomously moving Janus or coaxial structures, depending on their volumes. Notably, the system with a coaxial structure demonstrates cyclic behavior, alternating between autonomous motion and eruption. Despite their complexity, the dynamic behaviors of the system are consistently explained in terms of the spreading properties of perfluorodecalin/decane duplex interfacial films.

Spontaneous Formation of Uniform Cell-Sized Microgels through Water/Water Phase Separation.

In this study, a one-step method is discussed for producing uniform cell-sized microgels using glass capillaries filled with a binary polymer blend of polyethylene glycol (PEG) and gelatin. Upon decreasing temperature, phase separation of the PEG/gelatin blends and gelation of gelatin occur, and then the polymer blend forms linearly aligned, uniformly sized gelatin microgels in the glass capillary. When DNA is added to the polymer solution, gelatin microgels entrapping DNA are spontaneously formed, and the DNA prevents the coalescence of the microdroplets even at temperatures above the melting point. This novel method to form uniform cell-sized microgels may be applicable to other biopolymers. This method is expected to contribute to diverse materials science via biopolymer microgels and biophysics and synthetic biology through cellular models containing biopolymer gels.

Reversed spin of a ratchet motor on a vibrating water bed.

A ratchet gear on a vibrating water bed exhibits a one-way spin. However, the spinning direction is opposite to that of the gear placed on the granular bed. The one-way spin is caused by the surface waves of water. Surface deformation causes transportation of the water element to rotate the gear. The spatial symmetry of the surface wave and gear geometry regulates the rotational torque. In this study, the same ratchet shows reversed motion between the granular and water beds, and the direction is not determined only by the ratchet geometry. The self-organization of the fluid medium caused by small agitation induces a nontrivial inversion of the spinning direction.

Star-Shaped Peptide-Polymer Hybrids as Fast pH-Responsive Supramolecular Hydrogels.

Significant challenges have gone into the design of smart hydrogels, with numerous potential applications in the industrial, cosmetic, and biomedical fields. Herein, we report the synthesis of novel 4-arm self-assembling peptide-polyethylene glycol (PEG) hybrid star-shaped polymers and their comprehensive hydrogel properties. ß-sheet-forming oligopeptides with alternating hydrophobic Leu/ionizable Glu repeats and Cys residues were successfully conjugated to 4-arm PEG via a thiol-maleimide click reaction. The hybrid star-shaped polymers demonstrated good cytocompatibility and reversible ß-sheet (lightly acidic pH)-to-random coil (neutral and basic pH) transition in dilute aqueous solutions. At increasing polymer concentrations up to 0.5 wt %, the star-shaped polymers formed transparent hydrogels with shear-thinning and self-healing behaviors via ß-sheet self-assembly, as well as a conformation-dependent gel-sol transition. Interestingly, the star-shaped polymers responded rapidly to pH changes, causing gelation to occur rapidly within a few seconds from the change in pH. Hydrogel characteristics could be modulated by manipulating the length and net charge of the peptide blocks. Furthermore, these star-shaped polymers served as satisfactory network scaffolds that could respond to dynamic environmental changes in the pH-oscillation system, owing to their excellent gelation capability and pH sensitivity. As such, they are highly favorable for diverse applications, such as pH-responsive controlled release.

Mode Bifurcation on Contact Line Dynamics at Oil/Water Interface Depending on the Contact Line Length.

The motion of the contact line at the oil/water interface caused by chemical reactions is well known as a typical example of artificial active matter in the field of nonlinear science. When water (containing trimethylstearylammonium chloride) and nitrobenzene (containing iodide anion) phases are in contact, the regulated traveling-wave patterns appear along the inner wall of the glass container. In this study, we demonstrate a new dynamical mode of the contact line, an up-and-down motion, which becomes dominant with the decrease in the size of a glass tube, and the probability of occurrence is extremely high when the diameter of the glass tube is below 1 mm. A physicochemical model of the contact line motion that incorporates the spatiotemporal variation of the surfactant concentration on a glass surface is proposed, and its effect on the wettability of oil/water phases on the walls of the glass tubes is studied. The present model can reproduce the mode bifurcation of the dynamical motion depending on the inner diameter of the glass tubes.

Horizontal spin of ratchet motor by vertical agitation.

The horizontal spin of a ratchet motor by vertical vibration is reported. A macroscopic ratchet gear is placed on a granular bed, where nearly half of the gear is penetrated in the bed. The gear and granular bed are mechanically vibrated. The gear shows a random motion or one-way spin that depend on the diameter of the granules, vibration frequency, and degree of vertical motion allowed for the gear. Even when one-way spin is observed, the spin direction depends on the abovementioned factors. Although the dependency is complicated, it is deterministic because the motion or flows of granular matter determines it. The characteristics observed in the experiments are explained by a simple model that accounts for the statistical variance in the motion of the granular matter. Extraction of systematic motion from small and non-useful motions such as mechanical agitation will be developed into energy harvest technology and may facilitate the science of a spontaneously moving system in a uniform potential field.

Ionic Tuning of Droplet Motion on Water Surface.

Herein, the oscillation of an oil droplet on the surface of water is studied. The droplet contains an anionic surfactant that can react with the cations present in water. The oscillation starts after a random motion, and the oscillation pattern apparently depends on the cation species in the water phase. However, a common pattern is included. The cation species only affects the amplitude and frequency and sometimes perturbs the regular pattern owing to the instability at the oil/water interface. This common pattern is explained by a simple model that incorporates the surfactant transport from the droplet to the surrounding water surface. The dependency of the amplitude and frequency on cation species is expressed quantitatively by a single parameter, the product of the amplitude and square of frequency. This parameter depends on the cationic species and can be understood in terms of the spreading coefficient. The simple model successfully explains this dependency.

Autonomous Movement System Induced by Synergy between pH Oscillation and a pH-Responsive Oil Droplet.

A sustainable droplet motion that is driven by pH oscillation was obtained. The pH oscillation is only of a single pulse in a batch reactor. However, it shows continuous oscillation around the moving droplet, as the motion itself controls the diffusion flux in an asymmetric manner. Various types of motions that are spontaneous in nature may be obtained by a single-pulse oscillation coupled with mass transport.

Helical micromotor operating under stationary DC electrostatic field.

The direct current (DC) motor is a rotary device that converts DC electrical energy into mechanical energy. However, it is known that, in downsizing the currently available macromotor, rotary motion of DC micromotors cannot work well due to the larger viscous effect. Here, we report simple DC micromotors working under a new principle. We previously revealed that in an oil phase containing an ionic surfactant, non-spherical particles exhibit various types of regular motions such as spinning and circular orbital motions. In this study, we found that a microhelix exhibits a new type of periodic motion, namely, the cork-screw-type rotation, in a specific direction depending on the material of the helix, metal or non-metallic organics. The results show that a left-handed nickel helix rotates in the clockwise direction when viewed from the positive electrode, whereas an organic one rotates in the opposite direction (anti-clockwise) under the same electrode arrangement with stationary constant DC voltage. In addition, we demonstrate that the cork-screw rotation is switched to opposite direction by changing the handedness (chirality). It is to be noted that the micromotors reported here maintain their stable motion without any mechanical support such as rotational axes or electronic switching devices. The invented DC micromotor would be applicable for mechanical and fluidic devices, being useful as a smart device in microrobots and microfluidics.

Light-driven locomotion of a centimeter-sized object at the air-water interface: effect of fluid resistance.

A centimeter-sized flat-headed push pin with photothermal properties can be moved on a water surface by a simple near-infrared laser. Using light as an external stimulus allows for the remote control of the timing, direction and velocity of its locomotion. It has been clarified that the vertical orientation of the pin at the air-water interface affects the friction of locomotion, and therefore velocity and acceleration. The pin placed on a water surface with a pin point upward (a point protruding into air phase) moved an average distance of 5.3 ± 2.9 cm following one pulse of laser irradiation, and that placed with a pin point downward (a point protruding into water phase) moved 2.0 ± 1.4 cm. The velocity and acceleration were larger when the pin was placed on the water surface with a pin pointing upward, compared to when placed with the pin pointing downward. Numerical analysis conducted for the locomotions of the pin concluded that the differences in traveling distance, velocity and acceleration were due to the difference in fluid resistance of the pin point in air and water phases during their locomotion. This demonstration of remote control of the motion of small objects by light can open up a wide range of future transport applications.

Self-Organized Micro-Spiral of Single-Walled Carbon Nanotubes.

Single-walled carbon nanotubes (SWCNTs) are reported to spontaneously align in a rotational pattern by drying a liquid droplet of toluene containing polyfluorene as a dispersant. By situating a droplet of an SWCNT solution around a glass bead, spiral patterns are generated. The parallel alignment of SWCNTs along one stripe of such a pattern is confirmed using scanning electron microscopy and polarized optical microscopy. The orientation order increases toward the outer edge of a stripe. The stripe width in the pattern is proportional to the solute concentration, and the width and position of the stripes follow geometric sequences. The growth of the rotational pattern is also observed in real time. The process of spiral pattern formation is visualized, indicating the role of the annihilation of counter-traveling accompanied by continuous depinning. The geometric sequences for the stripe width and position are explained by the near-constant traveling speed and solute enrichment at the droplet periphery.

Cation-Dependent Emergence of Regular Motion of a Float.

We report a unique ion-dependent motion of a float at an oil/water interface. The type of motion depended on the cation species that was dissolved in the water. Irregular vibrations occurred when the water contained Ca(2+), back-and-forth motion occurred when the water contained Fe(2+), a type of motion intermediate between these occurred when the water contained Mn(2+), and intermittent long-distance travel occurred when the water contained Fe(3+). This is one of the simplest systems that can be used to show how macroscopic regular motion emerges depending on specific chemicals, which is one of the central issues in the study of biological and biomimetic motions.

An Abiotic Glass-Bead Collector Exhibiting Active Transport.

Animals relocate objects as needed by active motion. Active transport is ubiquitous in living organisms but has been difficult to realize in abiotic systems. Here we show that a self-propelled droplet can gather scattered beads toward one place on a floor and sweep it clean. This is a biomimetic active transport with loadings and unloadings, because the transport was performed by a carrier and the motion of the carrier was maintained by the energy of the chemical reaction. The oil droplet produced fluctuation of the local number density of the beads on the floor, followed by its autocatalytic growth. This mechanism may inspire the technologies based on active transport wherein chemical and physical substances migrate as in living organisms.

The evolution of spatial ordering of oil drops fast spreading on a water surface.

The design of dynamically self-assembled systems is of high interest in science and technology. Here, we report a unique cascade in the self-ordering of droplets accompanied by a dewetting transition. The dynamic self-emergent droplets are observed when a thin liquid layer of an immiscible fluorocarbon oil (perfluorooctyl bromide, PFOB) is placed on a water surface. Due to the gradual evaporation of PFOB, a circular PFOB-free domain appears as a result of a local dewetting transition. A circular pearling structure is generated at the rim with the growth of the dewetting hole. As the next stage, linear arrays of droplets are generated in a radial manner from the centre of the hole. These one-dimensional arrangements then evolve into two-dimensional hexagonal arrays of microdroplets through collective rhythmical shrinking/expanding motions. The emergence of such dynamic patterns is discussed in terms of the nonlinear kinetics of the dewetting transition under thermodynamically dissipative conditions.

Catalytic micromotor generating self-propelled regular motion through random fluctuation.

Most of the current studies on nano∕microscale motors to generate regular motion have adapted the strategy to fabricate a composite with different materials. In this paper, we report that a simple object solely made of platinum generates regular motion driven by a catalytic chemical reaction with hydrogen peroxide. Depending on the morphological symmetry of the catalytic particles, a rich variety of random and regular motions are observed. The experimental trend is well reproduced by a simple theoretical model by taking into account of the anisotropic viscous effect on the self-propelled active Brownian fluctuation.

Ion-selective Marangoni instability--chemical sensing of specific cation for macroscopic movement.

Spontaneous motion and tension oscillation of an oil/water interface responding to specific cation Ca(2+) or Fe(3+) were observed when the oil phase containing the anionic surfactant bis(2-ethylhexyl) phosphate came in contact with the cation-containing water. Both the dynamics were the results of Marangoni instability. Complex formation between the anionic surfactant and cation caused the instability. The results showing the level of cation extraction and degree of interfacial tension revealed that the surfactant-cation combination forms an oil-soluble complex with reduced surface activity. Brewster angle microscopy indicated that molecules of the complex tend to aggregate at the interface. This aggregation affected the desorption rate of the complex. We were able to generate ion-selective instability by imposing mechanical and electrochemical perturbations to the interface at equilibrium. The results from these efforts suggested that the aggregation is a type of thermodynamic transition and is required for the onset of instability: Desorption probably occurs as an exfoliation of the aggregated complex, which generates the gradient of interfacial tension. For the standard experiment of biphasic contact, two neighboring interfacial flows compress the local interface between them. We considered that this compression provides mechanical work to the local interface, resulting in desorption of the aggregates and occurrence of instability. Both complex formation and aggregation are possible in the presence of the specific cation. The interface detects the cation via the chemical and thermodynamic processes in order to develop the macroscopic movement, a form of biomimetic motion of the oil/water interface.

Ion-selective Marangoni instability coupled with the nonlinear adsorption/desorption rate.

An oil/water interface containing bis(2-ethylhexyl)phosphate and Ca(2+) or Fe(3+) exhibits spontaneous Marangoni instability associated with the fluctuation in interfacial tension. This instability rarely appears for oil/water systems with Mg(2+), Sr(2+), Ba(2+), Cu(2+), or Co(2+). The same ion selectivity is observed for n-heptane and nitrobenzene despite their significant differences in density, viscosity, and the dielectric constant of oil. We studied this instability under acidic pH conditions to avoid the neutralization reaction effects. The result of the equilibrium interfacial tension and the extraction ratio of cations indicates that a large number of oil-soluble complexes form at the interfaces of Ca(2+)-containing systems and probably for Fe(3+)-containing systems. The results obtained by oscillating drop tensiometry and Brewster angle microscopy indicate that desorption, rather than adsorption, is more significant to the onset of instability and that the resulting complex tends to form aggregates in the interface. This aggregation gives the nonlinear desorption rate of the oil-soluble complex. Then, exfoliation of the aggregating matter occurs, which triggers the Marangoni instability. The induced convection removes the oil-soluble complex accumulated at the interface, creating a renewed interface, which is necessary for the successive occurrence of the Marangoni instability. For the other cations, the oil-soluble compounds are insignificant, and they rarely form aggregates. In such cases, adsorption/desorption proceeds without instability.

Spontaneous periodic pulsation of contact line in oil/water system--frequency control with divalent cations and applied voltage.

Periodic oscillatory change of hydrophilicity (or hydrophobicity) of a glass surface was studied. A glass capillary was immersed normally at an oil/water interface. The water phase contained the cationic surfactant trimethyloctadecylammoniumchloride, and the oil phase contained bis(2ethylhexyl) phosphate. Adsorption of the surfactant molecules and their desorption via anionic chemicals dissolved in the oil generated a gradual wetting by the water, followed by a rapid wetting by oil. The three phase contact line exhibited a pulse-like motion that continued, at least for a few minutes. The frequency depended on the cation species dissolved in water and the applied voltage across the oil/water interface. Four kinds of cations, Mg(2+), Ca(2+), Sr(2+) and Ba(2+) were used. While the frequency order was Ba(2+)>Sr(2+)>Mg(2+), the Ca(2+)-containing interface did not show any motion irrespective of the applied voltage. There was a threshold voltage and concentration of anionic chemical that was necessary for the onset of this motion. The pulsation mechanism and its ion selectivity are also discussed. This interfacial motion was a typical nonlinear oscillation with an ion-selective nature. In this regard, this interfacial motion had biomimetic characteristics.

Protrusion and rising of a gel-based precipitation layer.

Two types of unstable growth of a precipitation layer in gel are discussed. A cation and an anion that are reactive diffuse from opposite ends of the gel to its center. A white turbid zone forms due to their reactions. When the concentration ratios for both the ions are far from stoichiometry, the turbid zone expands toward the lower-concentration side. However, when the ratio is nearly stoichiometric, unstable growth occurs. In a glass tube, a protrusion of the precipitation region from the turbid zone grows, which forms a long needle-like shape. When a free surface is present on the gel, the precipitation region protrudes from the gel surface to form a rising structure. Mapping the growing structure on a concentration diagram and using scanning electron microscopy to examine contained particles suggest that the reaction is restricted to a narrow region and the reaction product migrates through a path formed in the protrusive structure to form a bulk solid at the edge.