ABSTRACT
BACKGROUND: When a pilot hole is made prior to a screw's insertion into bone, the same drill bit is used irrespective of the bone quality. However, osteoporotic bone is fragile and this may affect the hole diameter, which is of particular concern in cancellous bone. In this study, the relationship between bone density and drill-hole diameter was investigated assuming a pre-drilling process in screw-only osteosynthesis in the metaphysis and epiphysis. METHODS: Two types of drill bit (triple-flute [T] and quadruple-flute [Q]) with different shapes and diameters were prepared: type T bits with 3.5 mm and 4.4 mm diameters, and type Q bits with 3.5 mm and 4.2 mm diameters. Drilling was performed manually in simulated bones with four densities: 5, 10, 15, and 20 pounds per cubic foot. We measured the hole diameters with a coordinate measuring machine and analyzed the relationship between the drill-hole diameters and the densities of the simulated bones. We then compared the screw pull-out strength between the two 3.5-diameter drill bits. RESULTS: In all cases, the diameters of the drill holes were larger than those of the drill bits. The relationship between the drill-hole diameters and the bone densities was a negative linear correlation. Enlarging the hole diameter decreased the screw pull-out strength. CONCLUSIONS: For cannulated drill bits of 3.5, 4.2 and 4.4 mm diameter, the diameter of the drill hole in cancellous bone obtained by the manual drilling technique tends to be larger in low-density (e.g., osteoporotic) compared to high-density (e.g., healthy) bone.
ABSTRACT
BACKGROUND: Clarifying the effect of each parameter of screw design on its fixation strength is critical in the development of any type of screw. The purpose of this study was to clarify the relationship between the thread depth and fixation strength of metal screws for cancellous bone. METHODS: Nine types of custom-made screws with the only changed variable being the thread depth were manufactured. Other elements were fixed at a major diameter of 4.5 mm, a thread region length of 15 mm, a pitch of 1.6 mm, and a thread width of 0.20 mm. The pull-out strength and insertion torque of each screw were measured for each of two foam-block densities (10 or 20 pcf). The correlation between the thread depth of the screw and the mechanical findings were investigated with single regression analysis. RESULTS: Regardless of the foam-block density, the pull-out strength significantly increased as the thread depth increased from 0.1 mm to 0.4 mm; after that, the increase was more gradual (p < 0.01, respectively). The relationship between the thread depth and insertion torque was similar. In addition, the insertion torque tended to be more strongly affected by screw depth than the pull-out strength (2.6 times at 20 pcf and 1.4 times at 10 pcf). CONCLUSIONS: The pull-out strength of 4.5-mm-diameter metal screws in a cancellous bone model was found to be biphasic, although linearly correlated with the change in screw depth in both phases. The boundary of the correlation was 0.4 mm regardless of the density of the bone model, with the effect of screw depth on pull-out strength beyond that being small in comparison.
