Pre-exposure prophylactic mucoadhesive sodium alginate microsphere laden pessaries for intravaginal delivery of tenofovir disoproxil fumarate.

The research aimed to develop novel bioadhesive sodium alginate (Na-Alg) microspheres laden pessaries for intravaginal delivery of tenofovir disoproxil fumarate (TDF), to overcome limitations of conventional dosage forms. Twelve batches of microspheres formulated by emulsification gelation method indicated that drug-polymer ratios and polymer type affected particle size, drug release, and entrapment efficiency (%EE). Microspheres of batch EH-8 with drug: polymer ratio of 1:4 containing equal amounts of Na-Alg and HPMC K100M displayed optimal %EE (62.09 ± 1.34 %) and controlled drug release (97.02 ± 4.54 % in 12 h). Particle size analysis in Matersizer indicated that microspheres (EH-8) displayed a surface-mean diameter of 11.06 ± 0.18 µm. Ex-vivo mucoadhesion studies on rabbit mucosa indicated that microspheres (EH-8) adhered well for 12 h. Microspheres integrated into pessaries displayed a sustained release profile (95.31 ± 1.37 % in 12 h) in simulated vaginal fluid. In vivo studies in rabbits indicated that pessaries displayed a significantly higher Cmax (41.18 ± 3.57 ng/mL) (P < 0.005) and reduced Tmax (1.00 ± 0.01 h) (P < 0.0001) of TDF concentrations in vaginal fluid compared to oral tablets. The microparticulate pessaries with the ability to elicit higher vaginal fluid levels in the crucial initial hours of insertion demonstrates a potential novel platform to offer better self-protection to HIV-negative women against HIV during sexual intercourse.

Development and optimization of in-situ gel containing chitosan nanoparticles for possible nose-to-brain delivery of vinpocetine.

Vinpocetine (VIN), a derivative of vincamine found in the vinca plant, widens blood vessels in the brain and has been shown to improve cognitive function, memory, and cerebrovascular disorders. Nevertheless, the clinical utility of VIN is constrained by factors such as low oral bioavailability owing to the first-pass metabolism that often demands frequent dosing of 3-4 tablets/day. In this regard, the present work aimed to develop VIN-loaded chitosan nanoparticles (VIN-CH-NPs) to surmount these limitations and in view to enhance delivery to the brain of VIN by minimizing systemic exposure. The chitosan (CH) nanoparticles (NP) were developed by ionotropic gelation technique employing tripolyphosphate (TPP) as a cross-linking agent. Employing Design of Experiments (DoE), the effect of CH and TPP concentrations and stirring speed were systematically optimized using Box Behnken design (BBD). The optimized batch of nanoparticles displayed a particle size, zeta potential, entrapment efficiency, and drug loading of 130.6 ± 8.38 nm, +40.81 ± 0.11 mV, 97.56 ± 0.04 %, and 61 ± 0.89 %, respectively. Fourier Transform Infrared Spectroscopy indicated the chemical integrity of the drug ruling out the interaction between the VIN and excipients used. DSC and PXRD data indicated that reduction of the crystallinity of VIN in the chitosan matrix. These VIN-CH-NPs manifested good stability, exhibiting an almost spherical morphology. To mitigate rapid mucociliary clearance upon intranasal administration, the optimized VIN-CH-NPs were incorporated into thermosensitive in situ gel (VIN-CHN-ISG). It was observed that the in-situ gel loaded with nanoparticles was opalescent with a pH level of 5.3 ± 0.38. It was also noted that the gelation temperature was 32 ± 0.89 °C, and the gelation time was approximately 15 s. The drug delivery to the brain through the nasal application of optimized VIN-NPs in situ gel was assessed in rats. The results indicated significant nasal application of the in-situ gel nearly doubled the Cmax (P < 0.05) and AUC0-t (P < 0.05) in the brain compared to oral administration. Nasal administration improved drug delivery to the brain by reducing systemic exposure to VIN. A histopathological study of the nasal mucosa revealed no irritation or toxicity, making it safe for nasal administration. These findings suggest that the developed NPs in-situ gel effectively targeted vinpocetine to the brain through the nasal pathway, providing a potential therapeutic strategy for managing Alzheimer's disease.

Polymer coated polymeric microneedles for intravitreal delivery of dexamethasone.

The polymer coated polymeric (PCP) microneedles (MNs) is a novel approach for controlled delivery of drugs (without allowing release of the excipients) to the target site. PCP MNs was explored as an approach to deliver the drug intravitreally to minimize the risks associated with conventional intravitreal injections. The core MNs was fabricated with polyvinyl pyrrolidone K30 (PVP K30) and coating was with Eudragit E100. Preformulation studies revealed that the films prepared using Eudragit E 100 exhibited excellent integrity in the physiological medium after prolonged exposure. FTIR studies were performed to investigate the possible interaction between the API and the polymer. The PCP MNs fabricated with different drug loads (dexamethasone sodium phosphate) were subjected to in vitro drug release studies. The drug release from uncoated MNs was instantaneous and complete. On the other hand, a controlled release profile was observed in case of PCP MNs. Likewise, even in the ex vivo porcine eye model, the drug release was gradual into the vitreous humor in case of PCP MNs. The uncoated microneedles released all the drug instantaneously where the PCP MNs retarded the release up to 3 h.

Continuous Manufacturing of Oil in Water (O/W) Emulgel by Extrusion Process.

Pharmaceutical industries and drug regulatory agencies are inclining towards continuous manufacturing due to better control over the processing conditions and in view to improve product quality. In the present work, continuous manufacturing of O/W emulgel by melt extrusion process was explored using lidocaine as an active pharmaceutical ingredient. Emulgel was characterized for pH, water activity, globule size distribution, and in vitro release rate. Additionally, effect of temperature (25°C and 60°C) and screw speed (100, 300, and 600 rpm) on the globule size and in vitro release rate was studied. Results indicated that at a given temperature, emulgel prepared under screw speed of 300 rpm resulted in products with smaller globules and faster drug release.

Promising Role of Silk-Based Biomaterials for Ocular-Based Drug Delivery and Tissue Engineering.

Silk is a wonderful biopolymer that has a long history of medical applications. Surgical cords and medically authorised human analogues made of silk have a long history of use in management. We describe the use of silk in the treatment of eye diseases in this review by looking at the usage of silk fibroin for eye-related drug delivery applications and medication transfer to the eyes. During this ancient art endeavour, a reduced engineering project that employed silk as a platform for medicine delivery or a cell-filled matrix helped reignite interest. With considerable attention, this study explores the present usage of silk in ocular-based drug delivery. This paper also examines emerging developments with the use of silk as a biopolymer for the treatment of eye ailments. As treatment options for glaucoma, diabetic retinopathy, retinitis pigmentosa, and other retinal diseases and degenerations are developed, the trans-scleral route of drug delivery holds great promise for the selective, sustained-release delivery of these novel therapeutic compounds. We should expect a swarm of silk-inspired materials to enter clinical testing and use on the surface as the secrets of silk are unveiled. This article finishes with a discussion on potential silk power, which adds to better ideas and enhanced ocular medicine delivery.

Silk Fibroin as an Efficient Biomaterial for Drug Delivery, Gene Therapy, and Wound Healing.

Silk fibroin (SF), an organic material obtained from the cocoons of a silkworm Bombyx mori, is used in several applications and has a proven track record in biomedicine owing to its superior compatibility with the human body, superb mechanical characteristics, and its controllable propensity to decay. Due to its robust biocompatibility, less immunogenic, non-toxic, non-carcinogenic, and biodegradable properties, it has been widely used in biological and biomedical fields, including wound healing. The key strategies for building diverse SF-based drug delivery systems are discussed in this review, as well as the most recent ways for developing functionalized SF for controlled or redirected medicines, gene therapy, and wound healing. Understanding the features of SF and the various ways to manipulate its physicochemical and mechanical properties enables the development of more effective drug delivery devices. Drugs are encapsulated in SF-based drug delivery systems to extend their shelf life and control their release, allowing them to travel further across the bloodstream and thus extend their range of operation. Furthermore, due to their tunable properties, SF-based drug delivery systems open up new possibilities for drug delivery, gene therapy, and wound healing.

Global Effect of COVID-19 Pandemic on Cancer Patients and its Treatment: A Systematic Review.

Background: At a global level, the COVID-19 disease outbreak has had a major impact on health services and has induced disruption in routine care of health institutions, exposing cancer patients to severe risks. To provide uninterrupted tumor treatment throughout a pandemic lockdown is a major obstacle. Coronavirus disease (COVID-19) and its causative virus, SARS-CoV-2, stance considerable challenges for the management of oncology patients. COVID-19 presents particularly severe respiratory and systemic infection in aging and immunosuppressed individuals, including patients with cancer. Objective: In the present review, we focused on emergent evidence from cancer sufferers that have been contaminated with COVID-19 and cancer patients who were at higher risk of severe COVID-19, and indicates that anticancer treatment may either rise COVID-19 susceptibility or have a duple therapeutic impact on cancer as well as COVID-19; moreover, how SARS-CoV-2 infection impacts cancer cells. Also, to assess the global effect of the COVID-19 disease outbreak on cancer and its treatment. Methods: A literature survey was conducted using PubMed, Web of Science (WOS), Embase, Cochrane Library, China National Knowledge Infrastructure (CNKI), and VIral Protein domain DataBase (VIP DB) between Dec 1, 2019 and Sep 23, 2021, for studies on anticancer treatments in patients with COVID-19. The characteristics of the patients, treatment types, mortality, and other additional outcomes were extracted and pooled for synthesis. Results: This disease has a huge effect on sufferers who have cancer(s). Sufferers of COVID-19 have a greater percentage of tumor diagnoses than the rest of the population. Likewise, cancer and highest proportion is lung cancer sufferers are more susceptible to COVID-19 constriction than the rest of the population. Conclusion: Sufferers who have both COVID-19 and tumor have a considerably elevated death risk than single COVID-19 positive patients overall. During the COVID-19 pandemic, there was a reduction in the screening of cancer and detection, and also deferral of routine therapies, which may contribute to an increase in cancer mortality there in future.

Polymer-Coated Polymeric (PCP) Microneedles for Controlled Dermal Delivery of 5-Fluorouracil.

Polymeric microneedles were prepared with Polyvinyl Pyrrolidone (PVP) K-30 using the mold casting technique. The core microneedles were coated with Eudragit E-100 by dip and spin method. The amount of 5-fluorouracil (FU) loaded in the core microneedles was 604 ± 35.4 µg. The coating thickness was 24.12 ± 1.12 µm. The objective was to deliver the 5-FU gradually in a controlled release manner at the target site in the sub-stratum corneum layer. This approach is anticipated to improve the safety and efficacy of topical melanoma treatment. The release of the drug was prolonged for up to 3 h from the polymer-coated polymeric (PCP) microneedles. The entire amount was found to release within 15 min in uncoated MNs. Likewise, the permeation of the drug from the uncoated microneedles was rapid, whereas the PCP microneedles were able to prolong the permeation up to 420 min. The PCP microneedles were subjected to stability studies at 25°C ± 2°C/60%RH, and 40°C ± 2°C/75%RH condition for 3 months. The formulations were found intact, and the release rate was not significantly different form the fresh formulation. The drug content was found to meet the acceptability criteria as well (98.12 ± 1.8% and 97.8 ± 2.1% at 25 and 40°C respectively after 3 months). Overall, this study demonstrated the feasibility of fabrication of PCP microneedles using Eudragit E100 for intraregional controlled delivery of drugs.

Polymer Coated Polymeric (PCP) Microneedles for Controlled Delivery of Drugs (Dermal and Intravitreal).

Microneedles are used to deliver drugs topically across the skin and mucous membranes. Dissolvable microneedles are made using soluble polymers, which disintegrates in the tissue and release the entire payload instantaneously including the polymer construct. Often, a slow release of drug into the tissue is desirable to overcome the severity of side effects at the site of administration as well as systemic adverse effects. In addition, controlled release of active pharmaceutical ingredient (API) only (not the excipients) is safe and effective particularly when the drug delivery is intended to sensitive organs like the eye. In this project, the feasibility of fabricating polymer coated polymeric (PCP) microneedles to achieve a gradual release of only the active ingredient from the device was investigated. The potential application of such PCP microneedles in the dermal and intravitreal drug delivery was also explored using animal tissue models. The PCP microneedles were found to be intact even after prolonged contact with the release medium. The time at which 50% (T50%) of dextran (10 K) was released in case of microneedles prepared using 20% of core polymer (PVP-K30) was about 15 min versus less than 5 min in the case of uncoated microneedles. Whereas when the core polymer concentration was increased to 50%, the T50% was increased to 90 min. The rate of release depended on the polymer molecular weight grade. The rate of drug release was not influenced by the total amount of concentration of dextran. The PCP microneedles of lidocaine hydrochloride could constantly release the drug for up to 9 h in the skin tissue. Likewise, the PCP microneedles infused voriconazole, intravitreally for 6 h.

Convective Solvent Transport Pathways for Absorption of Drugs from Topical Formulation.

Physicochemical and formulation factors influencing penetration of drugs from topical products into the skin and mechanisms of drug permeation are well investigated and reported in the literature. However, mechanisms of drug absorption during short-term exposure have not been given sufficient importance. In this project, the extent of absorption of drug molecules into the skin from aqueous and ethanolic solutions following a 5-min application period was investigated. The experiments demonstrated measurable magnitude of absorption into the skin for all the molecules tested despite the duration of exposure being only few minutes. Among the two solvents used, absorption was greater from aqueous than ethanolic solution. The results suggest that an alternative penetration pathway, herein referred to as the convective transport pathway, is likely responsible for the rapid, significant uptake of drug molecules during initial few minutes of exposure. Additionally, absorption through the convective transport pathways is a function of the physicochemical nature of the formulation vehicle rather than the API.

Polymer Coated Polymeric (PCP) microneedles for sampling of drugs and biomarkers from tissues.

The Polymer Coated Polymeric (PCP) microneedles were fabricated using PVP K30 in the core and ethyl cellulose in the coating. The PCP microneedles do not disintegrate in the tissue upon insertion and rather stays intact and allows diffusion of drugs and analytes across the membrane both inward and outward. In this project the potential use of PCP microneedles for sampling analytes from the dermal tissue was explored. The amount of analyte sampled depended on the concentration in the tissue, physicochemical properties of the analyte and duration of insertion of the array in the tissue. Further, an advanced type of PCP microneedle array was fabricated by entrapping absorbent beads in the core microneedles. The adsorbent enabled the PCP microneedles to recover significantly higher amount of analyte from the tissue.

Enhancement of Anticorrosive Performance of Cardanol Based Polyurethane Coatings by Incorporating Magnetic Hydroxyapatite Nanoparticles.

The present investigation demonstrates renewable cardanol-based polyol for the formulation of nanocomposite polyurethane (PU) coatings. The functional and structural features of cardanol polyol and nanoparticles were studied using FT-IR and 1H NMR spectroscopic techniques. The magnetic hydroxyapatite nanoparticles (MHAPs) were dispersed 1-5% in PU formulations to develop nanocomposite anticorrosive coatings. An increase in the strength of MHAP increased the anticorrosive performance as examined by immersion and electrochemical methods. The nanocomposite PU coatings showed good coating properties, viz., gloss, pencil hardness, flexibility, cross-cut adhesion, and chemical resistance. Additionally, the coatings were also studied for surface morphology, wetting, and thermal properties by scanning electron microscope (SEM), contact angle, and thermogravimetric analysis (TGA), respectively. The hydrophobic nature of PU coatings increased by the addition of MHAP, and an optimum result (105°) was observed in 3% loading. The developed coatings revealed its hydrophobic nature with excellent anticorrosive performance.

Non-dermal applications of microneedle drug delivery systems.

Microneedles (MNs) are micron-scaled needles measuring 100 to 1000 µm that were initially explored for delivery of therapeutic agents across the skin. Considering the success in transcutaneous drug delivery, the application of microneedles has been extended to different tissues and organs. The review captures the application of microneedles to the oral mucosa, the eye, vagina, gastric mucosa, nail, scalp, and vascular tissues for delivery of vaccines, biologics, drugs, and diagnostic agents. The technology has created easy access to the poorly accessible segments of eye to facilitate delivery of monoclonal antibodies and therapeutic agents in management of neovascular disease. Microporation has been reported to drastically improve the drug delivery through the poorly permeable nail plate. Curved microneedles and spatially designed microneedle cuffs have been found to be capable of delivering stem cells and therapeutic macromolecules directly to the cardiac tissue and the vascular smooth muscle cells, respectively. Besides being minimally invasive and patient compliant, the technology has the potential to offer viable solutions to deliver drugs through impermeable barriers owing to the ability to penetrate several biological barriers. The technology has been successful to overcome the delivery hurdles and enable direct delivery of drug to the target sites, thus maximizing the efficacy thereby reducing the required dose. This review is an attempt to capture the non-dermatological applications of microneedles being explored and provides an insight on the future trends in the field of microneedle technology. Pictorial representation of different microneedle application.

Standardization of topical preparations for finger-tip unit-Awareness and attitudes among pharmacists and dermatologists and suggestions to improve standardization of topical drug dosing-A two-phase cross-sectional survey.

BACKGROUND: Standardization of topical therapy dosage is important to ensure optimum use and dosage of topical medications. One of the concepts frequently used in the standardization of topical treatment is the Finger-tip unit (FTU). While practitioners, both dermatologists and pharmacists, are generally aware of FTU, practical use is less. OBJECTIVES: We aimed to evaluate views and practices related to FTU among both dermatology and pharmacy faculty and to elicit and validate suggestions for improving standardization. METHODS: We surveyed a group of Dermatologists and Pharmacists-in two phases-in phase 1 (n = 44), an electronic survey was used as a tool to understand their practices regarding FTU, and to obtain suggestions regarding standardization of topical medication delivery. In phase 2 (n = 40), the main suggestions for improvement were resent to the group to rate and validate the same. RESULTS: The awareness of FTU was high among the experts, but practical use of the FTU for patient counselling was less frequent. The group gave suggestions to standardize applications. All these suggestions got high ratings on both feasibility and possible effectiveness in the second phase, with the highest rating being for the suggestion of "Placing QR codes on ointment/cream tubes which link to websites with educational materials/ videos on FTU/topical drug dosing." CONCLUSION: Awareness regarding FTU is high among both dermatologists and pharmacists, however practical use is less. Strategies to improve standardization of topical drug dosing can be formulated through collaboration involving both dermatologists and pharmacists.

Koch's Tuberculosis of the Sternoclavicular Joint.

Introduction: Tuberculosis bacilli have lived in symbiosis with mankind since time memorial. Rigveda and Atharvaveda (3500-188 B.C), Samhita of charka and Sushruta (1000 and 600 B.C) have mentioned the disease by the name of "Yakshma" in all forms. Lesions have been found in Egyptian mummies also. In western world, the clinical features and communicability of the disease were known before 1000 B.C. Tuberculosis is still a challenging health problem in developing countries, affecting almost all organs. Osteo articular tuberculosis is uncommon. Tuberculosis involving the sternoclavicular joint is extremely rare and often is misdiagnosed because of its rarity and unusual location. Literature has very less number of cases reported so far. Case Presentation: We are hereby reporting the case of a 70-year-old male, carpenter by profession who presented with right sternoclavicular joint swelling. Magnetic resonance imaging showed synovial thickening, articular, and subarticular erosions with diffuse sub chondral edema. Diagnosis was confirmed by ZN staining, FNAC, and diagnostic biopsy. Patient was managed conservatively by anti-tubercular treatment. Follow-up showed no relapse and improved clinical symptoms. Conclusion: Earlier detection and management of tuberculosis of such rare variants of joint infection help in preventing the destruction of osteo ligamentous structures, abscess formation, and joint instability. The report emphasizes on the appropriate diagnosis and management.

Low-grade fibromyxoid sarcoma: A rare case report.

Low-grade fibromyxoid sarcoma (LGFMS) is a rare type of sarcoma that is characterized by benign-appearing histologic features but a paradoxically aggressive clinical course. Recognition of this lesion is important because of its indolent but metastasizing nature. These tumors generally occur in young to middle-aged adults, sometimes in children, but rarely in the high-aged adults. LGFMS typically affects the deep soft tissues of the trunk or lower extremities: however, it is rarely seen on the maxillofacial region. Here, we describe a case of LGFMS on the left lower one-third region of the face of a 35-year-old male patient with a 6-month history. On gross examination, the resected specimen consisted of an open ovoid mass of 2 cm × 2 cm × 1 cm. Light microscopy revealed well-circumscribed myxoid tumor with hypocellular areas in nodules merging to collagenized areas. Immunohistochemical examination revealed diffuse positivity to vimentin, whereas tests for desmin, S-100 protein were negative, thus confirming the diagnosis. After the initial healing of the surgical wound, the patient was advised 30 cycles of radiotherapy. Recurrence and metastasis have not been observed for 1 year of surgical excision now. Due to the notably indolent nature of LGFMS, long-term follow-up is necessary to evaluate its clinical course.

Iontophoretic Mediated Intraarticular Delivery of Deformable Liposomes of Diclofenac Sodium.

BACKGROUND AND OBJECTIVE: Topical therapy is ineffective in the case of Musculoskeletal Disorders (MSD) as it is not able to maintain therapeutic levels of the drug in the affected joint due to its inability to surpass the dermal circulation and penetrate into deeper tissues. One of the approaches to enhance deep tissue penetration of drugs is to increase drug delivery much above the dermal clearance. The objective of the present work was to formulate negatively charged Deformable Liposomes (DL) of Diclofenac Sodium (DS) using biosurfactants and target the same to the synovial fluid by application of iontophoresis. METHODS: Deformable liposomes loaded with diclofenac sodium were formulated and characterized for surface morphology, particle size distribution, zeta potential and entrapment efficiency. In vitro permeation of the diclofenac from aqueous solution, conventional liposomes, and deformable liposomes under iontophoresis was performed using Franz diffusion cells and compared to passive control. Intraarticular microdialysis was carried out to determine the time course of drug concentration in the synovial fluid at the knee-joint region of the hind limb in Sprague Dawley rats. RESULTS: The vesicles were found to display a high entrapment (> 60%) and possess a negative zeta potential lower than -30 mV. The size of the vesicles was varied from 112.41 ± 1.42 nm and 154.6 ± 3.22 nm, demonstrated good stability on the application of iontophoresis. The iontophoretic flux values for the DS aqueous solution, conventional liposomes and deformable liposomal formulation were found to be 7.55 ± 0.42, 16.75±1.77and 44.01 ± 3.47 µg/ cm2 h-1, respectively. Deformable liposomes were found to display an enhancement of 5.83 fold compared to passive control. Iontophoresis was found to enhance the availability of DS deformable liposomes (0.56 ± 0.08 µg.h/ml) in the synovial fluid by nearly 2-fold over passive delivery (0.29 ± 0.05 µg.h/ml). CONCLUSION: Results obtained indicate that iontophoretic mediated transport of deformable liposomes could improve the regional bioavailability of diclofenac sodium to the synovial joints, an efficient mode for treating MSD in the elderly.

Topical Pilocarpine Formulation for Diagnosis of Cystic Fibrosis.

Cystic fibrosis is diagnosed in infants by estimating the levels of chloride ions present in the sweat induced by iontophoresis of pilocarpine solution. Elevated levels of chloride (≥60 mMol/L) in sweat are indicative of cystic fibrosis. However, the iontophoretic method of delivering pilocarpine is cumbersome and usually is associated with several side effects such as skin burn, skin rashes, erythema, and so forth. The objective of this study was therefore to develop a topical formulation that delivers adequate amount of pilocarpine. The drug delivery of formulation was compared with iontophoresis of aqueous solution of pilocarpine nitrate in vitro using porcine skin model. The pilocarpine levels in the skin exposed to topical pilocarpine solution under mild hyperthermia was 152.04 ± 52.23 µg/cm2 after 10 min of application, whereas it was 97.05 ± 27.93 µg/cm2 in the skin after 10 min of iontophoresis. The topical formulation was subjected to clinical evaluation to assess the efficacy of the product to induce sweat production. The average amount of the sweat secreted on application of topical formulation was found to be 77.28 ± 18.97 mg. Based on these results, it was found that the topical formulation was successful in delivering pilocarpine and to stimulate sweat secretion.

Rapidly Dissolving Microneedle Patches for Transdermal Iron Replenishment Therapy.

The prevalence of iron deficiency anemia (IDA) is predominant in women and children especially in developing countries. The disorder affects cognitive functions and physical activity. Although oral iron supplementation and parenteral therapy remains the preferred choice of treatment, gastric side effects and risk of iron overload decreases adherence to therapy. Transdermal route is an established approach, which circumvents the side effects associated with conventional therapy. In this project, an attempt was made to investigate the use of rapidly dissolving microneedles loaded with ferric pyrophosphate (FPP) as a potential therapeutic approach for management of IDA. Microneedle array patches were made using the micromolding technique and tested in vitro using rat skin to check the duration required for dissolution/disappearance of needles. The ability of FPP-loaded microneedles to replenish iron was investigated in anemic rats. Rats were fed iron-deficient diet for 5 weeks to induce IDA following which microneedle treatment was initiated. Recovery of rats from anemic state was monitored by measuring hematological and biochemical parameters. Results from in vivo study displayed significant improvements in hemoglobin and serum iron levels after 2-week treatment with FPP-loaded microneedles. The study effectively demonstrated the potential of microneedle-mediated iron replenishment for treatment of IDA.

Effect of terpenes on transdermal iontophoretic delivery of diclofenac potassium under constant voltage.

OBJECTIVE: The aim of the study was to enhance the transdermal delivery of diclofenac potassium (DP) from hydrogels by constant voltage iontophoresis (CVI). The other objective was to establish the safety and efficacy of CVI in rats. MATERIALS AND METHODS: Hydrogels of DP were developed using hydroxyethyl cellulose as matrix material and geraniol, l-menthol and thymol as iontophoretic efficiency enhancers (IEE). In vitro permeation of hydrogels under CVI (1.5 V) was performed in Franz diffusion cells across porcine skin. The ability of CVI to deliver therapeutic amount of DP in vivo was assessed in rat paw edema model. RESULTS: CVI significantly (p < 0.05) increased the steady state flux of DP compared to the passive. The hydrogels containing geraniol and l-menthol enhanced the iontophoretic flux of DP by ∼4.75 and ∼4.49 fold, respectively compared to passive control. The in vivo studies indicated that CVI in combination with IEE, significantly reduced (p < 0.05) area under the curve (AUC) of % inflammation compared to passive treatment. An excellent correlation (r = 0.996) was noted between in vitro flux values and AUC of % inflammation. CONCLUSION: The preclinical studies conclusively demonstrated that CVI in combination with IEE's such as geraniol or l-menthol has the potential to safely deliver therapeutic amounts of DP.