Acid-base responsive molecular switching of a [2]rotaxane incorporating two different stations in an axle component.

Interlocked compounds such as rotaxanes and catenanes exhibit unique kinetic properties in response to external chemical or physical stimuli and are therefore expected to be applied to molecular machines and molecular sensors. To develop a novel rotaxane for this application, an isophthalamide macrocycle and a neutral phenanthroline axle were used. Stable pseudorotaxanes are known to be formed using hydrogen bonds and π-π interactions. In this study, we designed a non-symmetric axial molecule and synthesized a [2]rotaxane with the aim of introducing two different stations; a phenanthroline and a secondary amine/ammonium unit. Furthermore, 1H NMR measurements demonstrated that the obtained rotaxane acts as a molecular switch upon application of external acid/base stimuli.

Identification of Pathways for Production of D-Glucaric Acid by Pseudogluconobacter saccharoketogenes.

Pseudogluconobacter saccharoketogenes produces glucaric acid from D-glucose via two pathways, i.e., through D-glucuronic acid or D-gluconic acid. These pathways are catalyzed by alcohol dehydrogenase, aldehyde dehydrogenase, and gluconate dehydrogenase. Although D-glucaraldehyde and L-guluronic acid are also theorized to be produced in pathways throsugh D-glucuronic acid and D-gluconic acid, respectively, no direct data to identify these intermediates have been reported. In this study, the intermediates were purified and identified as D-glucaraldehyde and L-guluronic acid. The substrate specificities of the three enzymes on these intermediates and their oxidation products were studied, and the roles of alcohol, aldehyde, and gluconate dehydrogenases in D-glucaric acid-producing pathways were elucidated using the intermediates. Additionally, the substrate specificities of alcohol and aldehyde dehydrogenases on some alcohols, aldehydes, and aldoses were determined. Alcohol dehydrogenase showed wide substrate specificities, whereas the substrates oxidized by aldehyde dehydrogenase were limited. A 30-L scale reaction using the resting cells of Rh47-3 revealed that D-glucaric acid was produced from D-glucose and D-gluconic acid in 60.3 mol% (7.0 g/L) and 78.6 mol% (22.5 g/L) yields, respectively.

DBU-intercalated γ-titanium phosphate as a latent thermal catalyst in the reaction of glycidyl phenyl ether (GPE) and hexahydro-4-methylphthalic anhydride (MHHPA).

The capabilities and performance of γ-titanium phosphate (γ-TiP) with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as a latent thermal catalyst were investigated by the copolymerization of glycidyl phenyl ether (GPE) and hexahydro-4-methylphthalic anhydride (MHHPA) at different temperatures for a period of one hour. Polymerization was not observed until the reactants were heated to 100 °C. Upon increasing the temperature to 120 °C, the conversion in the presence of γ-TiP·DBU as a catalyst showed 98% conversion in 1 h. The thermal stability of GPE and MHHPA reacted in the presence of γ-TiP·DBU at 40 °C for 144 h resulted in less than 7% conversion of GPE. The conversion of GPE did not show a significant increase at 40 °C.

Deracemization of 1-phenylethanols in a one-pot process combining Mn-driven oxidation with enzymatic reduction utilizing a compartmentalization technique.

Racemic 1-phenylethanols were converted into enantiopure (R)-1-phenylethanols via a chemoenzymatic process in which manganese oxide driven oxidation was coupled with enzymatic biotransformation by compartmentalization of the reactions, although the two reactions conducted under mixed conditions are not compatible due to enzyme deactivation by Mn ions. Achiral 1-phenylethanol is oxidized to produce acetophenone in the interior chamber of a polydimethylsiloxane thimble. The acetophenone passes through the membrane into the exterior chamber where enantioselective biotransformation takes place to produce (R)-1-phenylethanol with an enantioselectivity of >99% ee and with 96% yield. The developed sequential reaction could be applied to the deracemization of a wide range of methyl- and chloro-substituted 1-phenylethanols (up to 93%, >99% ee). In addition, this method was applied to the selective hydroxylation of ethylbenzene to afford chiral 1-phenylethanol.

Identification of Enzymes from Pseudogluconobacter saccharoketogenes Producing d-Glucaric Acid from d-Glucose.

In 2004, the US Department of Energy listed d-glucaric acid as one of the top 12 bio-based chemicals and a potential biopolymer building block. In this study, we show that Pseudogluconobacter saccharoketogenes strains can produce d-glucaric acid from d-glucose, although in low yield because of the generation of the byproduct 2-keto-d-gluconic acid in large quantities. To improve d-glucaric acid yield, we generated Rh47-3, a P. saccharoketogenes IFO14464 mutant, which produced d-glucaric acid from d-gluconic acid and d-glucose with 81 and 53 mol% yields, respectively. Furthermore, the key enzymes involved in d-glucaric acid production, alcohol dehydrogenase (Ps-ADH), aldehyde dehydrogenase (Ps-ALDH), and gluconate 2-dehydrogenase (Ps-GADH), were purified and their roles in d-glucaric acid synthesis were evaluated. Ps-ADH and Ps-ALDH catalyzed d-glucaric acid production, which was mediated by d-gluconic acid and d-glucuronic acid pathways. In contrast, Ps-GADH inhibited d-glucaric acid production by promoting the formation of 2-keto-d-gluconic acid from d-glucose.

Sign dependence of MCPL spectra on type and position of substituent groups of pyrene and phenanthrene derivatives.

Diamagnetic achiral pyrene and phenanthrene derivatives substituted with electron-donating hydroxyl/methoxy groups and electron-withdrawing carboxylic acid groups exhibited clear magnetic circularly polarised luminescence (MCPL) spectra at 360-460 nm in dilute solvents upon the application of N-up and S-up Faraday geometries under an external magnetic field of 1.6 T. Their MCPL signs were also susceptible upon application of the same Faraday geometry.

Study on release suppression of cinnamaldehyde from κ-carrageenan gel by HR-MASNMR and pulsed field gradient NMR (PFG-NMR).

Aiming toward the production and characterization of delicious and functional gel foods, this communication studies the flavor release from cinnamon-containing κ-carrageenan gel. Cinnamaldehyde, which provides the flavor of cinnamon, was released in a trace amount from the gel and detected by flame ionization detector gas chromatography. The retention of cinnamaldehyde in κ-carrageenan gel and the interaction between flavor and polysaccharide were investigated by high-resolution magic-angle spinning nuclear magnetic resonance (HR-MAS NMR) and pulsed-field gradient NMR (PFG NMR). The intact cinnamaldehyde in the gel was also observed by HR-MAS NMR. The relative mobility difference of the flavor and polysaccharide molecules was observed from the diffusion-ordered NMR spectrum of PFG NMR.

One-pot analysis of enantiomeric excess of free amino acids by electrospray ionization mass spectrometry.

An electrospray ionization mass spectrometric method for the simultaneous analysis of the enantiomeric excess of free amino acids, without chromatographic separation, was demonstrated using a quasi-racemic mixture of deuterium-labelled and unlabelled chiral copper(ii) complexes. This convenient method enables the simultaneous high-sensitivity determination of the enantiomeric excess of 12 amino acids.

Excimer-origin CPL vs. monomer-origin magnetic CPL in photo-excited chiral binaphthyl-ester-pyrenes: critical role of ester direction.

Two chiral binaphthyl (BNp) derivatives bearing oppositely oriented ester linkers to two pyrene (Py) moieties [(R)/(S)-1 and (R)/(S)-2] enabled Py-origin circularly polarized luminescence (CPL), magnetic CPL (MCPL), and circular dichroism (CD). (R)-1 that exhibited (-)-sign CD showed (+)-sign Py-excimer CPL but did not exhibit MCPL. Conversely, (R)-2, with (-)-sign CD, did not show excimer-origin CPL, but exhibited clear Py-monomer MCPL.

Inter- and intramolecular excimer circularly polarised luminescence of planar chiral paracyclophane-pyrene luminophores.

Two types of planar chiral [2,2]paracyclophane-pyrene luminophores (1 and 2) with different binding positions of the fluorescent pyrene units were synthesised. (R)/(S)-1 with 1-pyrene units exhibited green intermolecular excimer circularly polarised luminescence (CPL) at 530 nm in the KBr-pellet, but exhibited no CPL signal in dilute CHCl3 solution. In contrast, (R)/(S)-2 with 2-pyrene units exhibited a blue intramolecular excimer CPL at 450 nm in CHCl3 solution. This is the first example of using the binding position of pyrene and the external environment to tune the type (inter- or intramolecular) and chiroptical sign of excimer CPL.

Circularly polarised luminescence (CPL) control of oligopeptide-Eu(iii) hybridized luminophores by interaction with peptide side chains.

Chiral oligopeptide-naphthalene/Eu(iii) hybridized luminophores emit strong circularly polarised solution-state luminescence (CPL) from Eu(iii) at 592 and 614 nm (|g CPL| ≤ 2.1 × 10-2). Although the peptide ligands have matching absolute configurations, the CPL sign is controllable by varying the number of naphthalene units and peptide/Eu(iii) coordination ratio.

Enantioselectivity-Evaluation of Chiral Copper(II) Complexes Coordinated by Novel Chiral Tetradentate Ligands for Free Amino Acids by Mass Spectrometry Coupled With the Isotopically Labeled Enantiomer Method.

A series of copper(II) complexes with chiral tetradentate ligands, N,N'-ethylene- bis(S-amino acid methyl amide or methyl ester) prepared from S-alanine, S-phenylalanine, S-valine or S-proline, was generated in methanol. The copper complexes provided three component complexes in the presence of a free chiral amino acid. The enantioselectivity for the amino acid was evaluated by electrospray ionization-mass spectrometry coupled with the deuterium-labeled enantiomer method and these copper complexes were found to exhibit high enantioselectivity for free amino acids having bulky side chains. This result suggests that steric interaction between the tetradentate ligand and free amino acid was a major factor in chiral recognition. The copper complex with a chiral tetradentate ligand prepared from S-proline showed opposite enantioselectivity to copper complexes consisting of tetradentate ligands prepared from other S-amino acids. The conformational difference of the tetradentate ligand in the copper complex was found to be significant for enantioselectivity.

Mass spectrometric detection of enantioselectivity in three-component complexation, copper(ii)-chiral tetradentate ligand-free amino acid in solution.

By using electrospray ionization mass spectrometry coupled with the use of deuterium-labelled quasienantiomers, enantioselective coordination of a free amino acid as the second ligand of a copper(ii) complex with a novel chiral tetradentate ligand was evaluated quantitatively in a short measurement time.

Circularly polarised luminescence from planar-chiral Phanephos/Tb(iii)(hfa)3 hybrid luminophores.

Planar-chiral Phanephos, containing the coordinatable P(iii), formed P(iii)/Tb(iii)(hfa)3 hybrid luminophores that successfully emitted characteristic circularly polarised luminescence (CPL) due to 5D4→7F5 transitions in solution. On the other hand, BINAP, containing P(iii)[double bond, length as m-dash]O as axially chiral ligand, exhibited no detectable CPL with Tb(iii)(hfa)3.

Circular dichroism and circularly polarised luminescence of bipyrenyl oligopeptides, with piperidines added in the peptide chains.

Upon combining chiral peptides (the most basic chiral source) with pyrene moieties, we found that chiral oligopeptides bearing two-pendant pyrenyl units exhibited circularly polarised luminescence (CPL) originating from intramolecular excimers at 450-490 nm in various solvents, and the sign of their CPL signals depended on the type of solvent employed. The CPL and circular dichroism signs and intensities could be tuned by the introduction of a piperidine unit into the chiral peptide chain; thus, the obtained structure could be considered a practical Lock ON-OFF system for oligopeptide luminophores.

Complexes of Eu(iii)(hfa)3 with a planar chiral P(iii) ligand (Phanephos): solvent-sensitive sign inversion of circularly polarised luminescence.

Complexes of Eu(iii)(hfa)3 with a C2-symmetric planar P(iii) ligand exhibited intense circularly polarised luminescence (CPL) due to 5D0 → 7F1 and 5D0 → 7F2 transitions, with the signs and shapes of CPL signals depending on the choice of solvent (acetone or chloroform).

Preparation of Pickering emulsions through interfacial adsorption by soft cyclodextrin nanogels.

BACKGROUND: Emulsions stabilized by colloidal particles are known as Pickering emulsions. To date, soft microgel particles as well as inorganic and organic particles have been utilized as Pickering emulsifiers. Although cyclodextrin (CD) works as an attractive emulsion stabilizer through the formation of a CD-oil complex at the oil-water interface, a high concentration of CD is normally required. Our research focuses on an effective Pickering emulsifier based on a soft colloidal CD polymer (CD nanogel) with a unique surface-active property. RESULTS: CD nanogels were prepared by crosslinking heptakis(2,6-di-O-methyl)-ß-cyclodextrin with phenyl diisocyanate and subsequent immersion of the resulting polymer in water. A dynamic light scattering study shows that primary CD nanogels with 30-50 nm diameter assemble into larger CD nanogels with 120 nm diameter by an increase in the concentration of CD nanogel from 0.01 to 0.1 wt %. The CD nanogel has a surface-active property at the air-water interface, which reduces the surface tension of water. The CD nanogel works as an effective Pickering emulsion stabilizer even at a low concentration (0.1 wt %), forming stable oil-in-water emulsions through interfacial adsorption by the CD nanogels. CONCLUSION: Soft CD nanogel particles adsorb at the oil-water interface with an effective coverage by forming a strong interconnected network and form a stable Pickering emulsion. The adsorption property of CD nanogels on the droplet surface has great potential to become new microcapsule building blocks with porous surfaces. These microcapsules may act as stimuli-responsive nanocarriers and nanocontainers.

A chemical approach to searching for bioactive ingredients in cigarette smoke.

Cigarette smoke, a collection of many toxic chemicals, contributes to the pathogenesis of smoking-related diseases such as chronic obstructive pulmonary disease and cancer. Much work has been done on the chemical analysis of ingredients in cigarette smoke, but there are few reports on the active ingredients that can modify biomolecules. We used a sensitive liquid chromatography-mass spectrometry (LC/MS) and LC/MS/MS method to show that L-tyrosine (Tyr), an amino acid with a highly reactive hydroxyl group, readily reacts with cigarette smoke extract (CSE) at body temperature (37°C) to form various Tyr derivatives. Among these derivatives were N-(3-oxobutyl)-Tyr and two acetylated compounds, N-acetyl-Tyr and O-acetyl-Tyr, which were synthesized by reaction of Tyr with methyl vinyl ketone and acetic anhydride, respectively, at 37°C. The presence of methyl vinyl ketone and acetic anhydride in CSE was confirmed by gas chromatography-mass spectrometry (GC/MS). These results indicate that Tyr can easily react with active ingredients in CSE. The present analytical methods should aid the search for active ingredients in cigarette smoke.

Emulsion polymerization by using chemocleavable emulsifiers derived from 1-o-alkylglycerols.

Poly(butyl methacrylate) and polystyrene were synthesized by emulsion polymerization using chemocleavable anionic surfactants (1a and 2a) derived from 1-O-alkylglycerols in order to resolve the problem that it is generally difficult to isolate the desired product from persistent emulsions. It has been previously determined that 1a decomposes completely under acidic conditions whereas 2a decomposes completely under both acidic and alkaline conditions. After emulsion polymerization, the emulsions could be easily broken by adding either HCl or NaOH. Further, the polymers could be filtered off very quickly. The polydispersities of these polymers were lower than those of the polymers synthesized by conventional emulsifiers. Further, the Na content values of the former were lower than those of the latter.

Preparation and properties of novel double-chain nonionic surfactants with acid decomposition function.

Novel double-chain nonionic surfactants with an acid decomposition function were prepared by acid-catalyzed condensation of chloroacetone with fatty alcohols (octyl, decyl, and dodecyl), followed by a Williamson reaction with polyethylene glycol without any expensive reagents and special equipment. These surfactants showed easy micelle formation compared to those of polyoxyethylene (n=9) dodecyl ether (C(12)EO9), and good foaming properties. The emulsion stability of these surfactants was almost the same as that of C(12)EO9. They decomposed completely after 30 min at pH 1. After 28 days they were more than 60% biodegradable and were almost the same as sodium dodecanoate.