ABSTRACT
The push for non-thermal food processing methods has emerged due to the challenges associated with thermal food processing methods, for instance, high operational costs and alteration of food nutrient components. Non-thermal food processing involves methods where the food materials receive microbiological inactivation without or with little direct application of heat. Besides being well established in scientific literature, research into non-thermal food processing technologies are constantly on the rise as applied to a wide range of food products. Due to such remarkable progress by scientists and researchers, there is need for continuous synthesis of relevant scientific literature for the benefit of all actors in the agro-food value chain, most importantly the food processors, and to supplement existing information. This review, therefore, aimed to provide a technological update on some selected non-thermal food processing methods specifically focused on their operational mechanisms, their effectiveness in preserving various kinds of foods, as revealed by their pros (merits) and cons (demerits). Specifically, pulsed electric field, pulsed light, ultraviolet radiation, high-pressure processing, non-thermal (cold) plasma, ozone treatment, ionizing radiation, and ultrasound were considered. What defines these techniques, their ability to exhibit limited changes in the sensory attributes of food, retain the food nutrient contents, ensure food safety, extend shelf-life, and being eco-friendly were highlighted. Rationalizing the process mechanisms about these specific non-thermal technologies alongside consumer education can help raise awareness prior to any design considerations, improvement of cost-effectiveness, and scaling-up their capacity for industrial-level applications.
ABSTRACT
Rubber (Hevea brasiliensis) is a perennial plant crop grown in many parts of Africa, South East Asia, and South America, especially within the hot and humid climatic regions. Rubber seed, either as feed or food, is a useful raw material to produce edible oil and protein. Despite the huge quantity of rubber seeds produced in Nigeria and its potential as a protein source, rubber seeds still appear neglected and under-utilised as feed/food given its perception as inedible and toxic due to the high concentration of cyanogenic glycoside. Therefore, the quest for effective processing technique(s) that would enhance its food use application is very fitting. This current study was directed to determine the changes in anti-nutrient, phytochemical, and micronutrient contents of different processed rubber seed meals. Specifically, the rubber seeds underwent processing, which employed boiling and the combined action of boiling and fermentation methods that brought about three seed meal flour groups, i.e., raw (RRSM), boiled (BRSM), and fermented (FRSM) seed meals. These were subsequently analysed for anti-nutrient/phytochemical (oxalate, phytate, tannin, phenols, saponin, hydrogen cyanide (HCN), alkaloids, flavonoids, and trypsin inhibitors), and micronutrient (which involved minerals (magnesium, phosphorus, calcium, iron, zinc, potassium, sodium, manganese, lead, and selenium) and vitamin (vitamin B1, B2, B3, C, E, and beta carotene)) contents. The results showed that the processing methods used to achieve the RRSM, BRSM, and FRSM, reduced the anti-nutrients (phytate, tannin, and oxalate) below the acceptable limits, and the HCN below the toxic levels. Importantly, the processing methods herein have not yet succeeded in removing HCN in the (processed) rubber seed meals, but can be seen to be heading toward the right direction. The FRSM obtained significantly lower (p < 0.05) anti-nutrient/phytochemical, but significantly higher (p < 0.05) mineral contents, compared with the other groups (RRSM and BRSM), except for flavonoids that obtained a 30% increase over the BRSM. Some mineral and vitamin contents could be lost in the BRSM compared to the others (RRSM and FRSM) in this study. Additionally, the FRSM obtained higher vitamin contents, after those of RRSM. Overall, the combined action of boiling and fermentation should be recommended for the proper utilisation of rubber seed as food/feed.
ABSTRACT
Gluten-free beer could be produced with rice, although the latter would primarily serve as adjunct in combination with barley malt in today's brewing. However, the recent growing realisation of the potential and applications of rice malt for brewing an all-rice malt beer through varying malting conditions cannot be overlooked. In this study, therefore, the characteristic changes in malt, wort, and beer from different Nigerian rice varieties (FARO 44, FARO 57, NERICA 7) as influenced by varying malting conditions (steeping duration (18, 24 and 30 h), germination periods (2, 3 and 4 days) and kilning temperatures (50 and 55 °C)), were investigated. Rice (grain) samples were examined by thousand kernel weight (TKW), germinative energy (GE), germinative capacity (GC), and degree of steeping (DoS). To ensure that rice wort/beer with unique beer style and enhanced attributes, comparable to barley wort/beer is produced, malting conditions that produced rice malts with peak diastatic power (DP), cold water extract (CWE), and hot water extract (HWE) were selected. Peak DP, CWE and HWE were obtained at FARO 44 (18 h steeping, 3 days germination, 55 °C kilning (S18G3K55°)), FARO 57 (30 h steeping, 2 days germination, 50 °C kilning (S30G2K50°)) and NERICA 7 (24 h steeping, 3 days germination, 55 °C kilning (S24G3K55°)). Selected malts were further tested for moisture content, total nitrogen, malt yield and malting loss and subsequently progressed to wort and beer production. Wort's pH, total soluble nitrogen (TSN), brix, kolbach index (KI), free amino nitrogen (FAN), dextrose equivalent (DE), original extract (OE) and sugar profile were determined, as well as beer's pH, colour, apparent extract (AE), alcohol by volume (%ABV), turbidity and sensory attributes. Rice grain varied significantly (p < 0.05) in TKW, GE, GC and DoS across varieties. Despite wort's pH, TSN, DE, OE as well as beer pH, colour, AE and turbidity resembling (p > 0.05) across varieties, wort's brix, KI, FAN, sugar profile as well as beer's %ABV, differed significantly (p < 0.05). Sensory attributes of appearance, colour, mouthfeel, and overall acceptability in beer differed noticeably (p < 0.05), except for aroma and taste (p > 0.05). Overall, the rice beer, though very slightly hazy, represented a pale yellow light lager, which is indicative of its peculiar beer style. Besides increased DP and enhanced hydrolysis, varying malting conditions of current study could serve as a pathway of reducing the cost of exogenous (commercial) enzymes or barley malt imports, together with decreasing barley's dependency for brewing in the tropics.
ABSTRACT
For the successful implementation of emerging electrical technologies in the oil pressing process, optimization of process parameters in combination with parameters from electrical process are crucial. The rheological property could be a simple and reliable efficiency indicatort of oil pressing. Knowledge of rheological properties is necessary for the design and development of appropriate equipment and process calculations. The objective of this work was to evaluate the effect of the following pre-treatments: pulsed electrical discharge (PED), temperature (28, 38 and 45 °C), overpressure (980, 1805 and 2800 Pa) and effect of initial oil content (40, 48.5 and 56%) on rheological properties of sunflower seed cake. The rheological behavior of sunflower seed cake was determined by using a rotational viscometer with a hydraulic system and thermostatic bath attached to the equipment. Using the mathematical apparatus and experimental data it was observed that the plastic viscosity of sunflower seed cake corresponds to the viscosity of the vegetable oil, which confirmed Bingham rheology assumption put forward in this work. Samples treated by PED had a modified material structure with an oil droplets and oil film on the surface. Single PED pre-treatment decreased initial shear stress from 24.36 to 22.89 Pa in samples where number of PED was 1800 per 60 s. Decrease in initial shear stress from 30.3 to 25.1 Pa was also observed when combination of temperature, pressure and PED was applied on seed cake. Reduction of the shear stress value, due to PED pre-treatment, enables to spend less energy during the oil pressing process. A positive linear relationship for overpressure and negative linear relationship for oil content and number of discharges on shear stress were obtained. The effect of temperature characterized by a decreasing of the plastic viscosity of the test material from 0.0985 to 0.0917 Pa s. The obtained parameters of the engineering rheological model allow prediction of rheological behavior of sunflower seed cake viscoplasticity flow over a wide range of shear rates in the pressing channel of the oil press.
