ABSTRACT
A self-calibrating method is described for measuring the radiative quantum efficiency (QE) in doped optical fibers. The method uses an integrating sphere to collect the fluorescence from the fiber, with pump light transmitted through the fiber end serving as a reference. QE measurements for a 780 or 808 nm pump were made on bismuth-doped AlGeP-silica fibers prepared by aerosol deposition. For both wavelengths, a value of QE=1.0+/-0.05 was obtained. Fluorescence was observed in two bands centered around 800 and 1300 nm, and the relative strength of these bands was found to vary with the pump wavelength.
ABSTRACT
For the first time to the authors' knowledge, we have demonstrated how thermally controlled overcoupled fused fiber couplers and fiber loop mirrors based on these couplers can be used as broadband tuning elements in a fiber laser cavity. No bulk optical elements play any role in this technique. Temperature tuning the coupler results in a shift in the coupling ratio or in the effective output coupler transmission. For a fixed pump source, and for a given laser cavity, this shift causes the lasing wavelength to shift. We have continuously tuned an Er silica fiber laser in this manner over the range of 1527-1570 nm in a ring configuration, and, using a fiber loop mirror with these couplers in a linear Tm silica fiber laser cavity, we have achieved more than 50-nm broadband tuning over the range of 1850-1910 nm. The tuning range and the sensitivity to temperature depend on the degree of overcoupling of the loop mirror coupler.
