Rapid immobilization of viable Bacillus pseudomycoides in polyvinyl alcohol/glutaraldehyde hydrogel for biological treatment of municipal wastewater.

A new approach for easy synthesis of Bacillus pseudomycoides immobilized polyvinyl alcohol (PVA)/glutaraldehyde (GA) hydrogel for application in a wastewater treatment system is reported. Optimization studies revealed that GA/PVA mass ratio of 0.03 and acidic pH of 2 were required for hydrogel synthesis and eventually for bacterial cell immobilization. The synthesized crosslinked matrix possessed a pore size suitable for microbial cell entrapment while maintaining cell accessibility to external environment for bioremediation. Possible crosslinking and bacterial cell immobilization in the hydrogel were evidenced by FTIR, XRD, and SEM studies, respectively. Further, the extent of crosslinking of GA with PVA was investigated and confirmed by transmittance and permeability experiments. The viability and proliferation of hydrogel embedded cells (after 25 days) was confirmed by confocal fluorescence microscopy which also indicated that acidic pH of polymer solution did not affect the immobilized live cells. B. pseudomycoides immobilized hydrogel were demonstrated to be effective for treatment of municipal wastewater and reduced biochemical oxygen demand (BOD), chemical oxygen demand (COD), and protein content below the recommended levels. Overall, the results from this bench-scale work show that employing bacteria-embedded PVA/GA hydrogel for the treatment of municipal wastewater yield promising results which should be further explored in pilot/field-scale studies.

In vitro toxicological evaluation of domestic effluent treated by formulated synthetic autochthonous bacterial consortium.

Supplementation of consortium comprising of aboriginal bacterial species with high degradation capacity can significantly enhance the biodegradation process of the domestic wastewater. The present study examined the bioremediation of domestic wastewater using a novel bacterial consortium comprising of five autochthonous bacterial strains with high potential for reduction in BOD, COD and protein content to 89%, 55% and 86%, respectively after 24 h of incubation. HPLC and GC-MS analyses revealed that the chosen consortium had successfully degraded wide-ranging complex organic compounds, which is crucial in the decontamination of wastewater. Phytotoxicity assay of the effluent exhibited that the seeds of Vigna radiata showed better growth and germination when subjected to wastewater treated by novel bacterial consortium as compared to the seeds exposed to untreated wastewater. Further, raw and treated wastewater were assessed for their genotoxicity with comet assay which displayed the intensity of DNA damage in the Allium cepa root tip cells before and after exposure to treated effluent. It is evident from the demonstrated results that the formulated bacterial consortium can be used successfully in a small-scale wastewater treatment plant.

Nitrofurantoin-melamine monohydrate (cocrystal hydrate): Probing the role of H-bonding on the structure and properties using quantum chemical calculations and vibrational spectroscopy.

Cocrystal monohydrate of nitrofurantoin (NF) with melamine (MELA) has been studied as NF is an antibacterial drug used for the treatment of urinary tract infections. The structure of nitrofurantoin-melamine-monohydrate (NF-MELA-H2O) is characterized by FT-IR and FT-Raman spectroscopy. The energies and vibrational frequencies of the optimized structures calculated using quantum chemical calculations. Supported by normal coordinate analyses and potential energy distributions (PEDs), the complete vibrational assignments recommended for the observed fundamentals of cocrystal hydrate. With the aim of inclusion of all the H-bond interactions, dimer of NF-MELA-H2O has been studied as only two molecules of cocrystal hydrate are present in the unit cell. By the study of dimeric model consistent assignment of the FT-IR and FT-Raman spectrum obtained. H-bonds are of essential importance in an extensive range of molecular sciences. The vibrational analyses depict existence of H-bonding (O-H⋯N) between water O-H and pyridyl N atom of MELA in both monomer and dimer. To probe the strength and nature of H-bonding in monomer and dimer, topological parameters such as electron density (ρBCP), Laplacian of electron density (∇2ρBCP), total electron energy density (HBCP) and H-bond energy (EHB) at bond critical points (BCP) are evaluated by quantum theory of atoms in molecules (QTAIM). Natural bond orbitals (NBOs) analyses are carried out to study especially the intra and intermolecular H-bonding and their second order stabilization energy (E(2)). The value of HOMO-LUMO energy band gap for NF-MELA-H2O (monomer and dimer both) is less than NF, showing more chemical reactivity for NF-MELA-H2O. Chemical reactivity has been described with the assistance of electronic descriptors. Global electrophilicity index (ω = 7.3992 eV) shows that NF-MELA-H2O behaves as a strong electrophile than NF. The local reactivity descriptors analyses such as Fukui functions, local softnesses and electrophilicity indices performed to determine the reactive sites within NF-MELA-H2O. In MEP map of NF-MELA (monomer and dimer) electronegative regions are about NO2 and C=O group of NF, although the electropositive regions are around NH2, N-H group and H2O molecule. Molar refractivity (MR) value of NF-MELA-H2O (monomer and dimer) lies within the range set by Lipinski's modified rules. This study could set as an example to study the H-bond interactions in pharmaceutical cocrystals.

The PM10 fraction of road dust in the UK and India: Characterization, source profiles and oxidative potential.

Most studies of road dust composition have sampled a very wide range of particle sizes, but from the perspective of respiratory exposure to resuspended dusts, it is the PM10 fraction which is of most importance. The PM10 fraction of road dust samples was collected at two sites in Birmingham, UK (major highway and road tunnel) and one site in New Delhi, India. Dust loadings were found to be much higher for New Delhi compared to Birmingham, while concentrations of several species were much higher in the case of Birmingham. Detailed chemical source profiles were prepared for both cities and previously generated empirical factors for source attribution to brake wear, tyre wear, and crustal dust were successfully applied to the UK sites. However, 100% of the mass for the Indian site could not be accounted for using these factors. This study highlights the need for generation of local empirical estimation factors for non-exhaust vehicle emissions. A limited number of bulk road dust and brake pad samples were also characterized. Oxidative potential (OP) was also determined for a limited number of PM10 and bulk road dust samples, and Cu was found to be a factor significantly associated with OP in PM10 and bulk road dust.

Distillery effluent induced alterations in the haematological profile of fingerlings of Colisa fasciatus.

Present study deals with the impact of Gorakhpur distillery effluent at various concentration levels (5, 10 and 20%) on the blood profile of fingerling of, Colisa fosciotus after 30 days of exposure. Observations revealed that 5% of effluent concentration produced no significant alterations in various haematological parameters except for clotting time and immature erythrocytes. However, 10% of effluent concentration brought significant alterations in hematocrit as well as clotting time and 20% of effluent concentration produced highly significant (P<0.001) alteration in most of the haematological parameters except for hemoglobin percentage.

Recent trends of the emission characteristics from the road construction industry.

Bitumen is a black, thermoplastic, hydrocarbon material derived from the processing of crude oil. At ambient temperature, bitumen is solid and does not present any health/environmental risks. This is one of the main reasons that bitumen is widely used for road construction all over the world. But during manufacturing/modification according to its application, storage, transportation, and use of bitumen is heated giving off various hydrocarbons emissions. In recent years, there has been increasing interest in investigating the potential of bitumen emissions to cause health effects. This is mainly because of the reason that bitumen has small amount of poly-aromatic hydrocarbons, along with some other volatiles like benzene, toluene, etc., which are known to be carcinogenic in nature. Thus, assessment of the emission characteristics and health hazards of bitumen fumes may have far reaching industrial economic and public health implications. In this review, we will discuss about the emission characteristics from bitumen, asphalts, or road construction, which is mainly contributed by bitumen fumes. Sampling strategies and analytical methods employed are also described briefly.

Recent developments of certified reference materials for road transportation.

Chemical measurements often constitute the basis for informed decision-making at different levels in society; sound decision-making is possible only if the quality of the data used is uncompromised. To guarantee the reliability and comparability of analytical data an intricate system of quality-assurance measures has to be put into effect in a laboratory. Reference materials and, in particular, certified reference materials (CRMs) are essential for achieving traceability and comparability of measurement results between laboratories and over time. As in any other domain of analytical chemistry, techniques used to monitor the levels and fate of contaminants in the environment must be calibrated using appropriate calibration materials, and the methods must be properly validated using fit-for purpose matrix-matched CRMs, to ensure confidence in the data produced. A sufficiently large number of matrix CRMs are available for analysis of most elements, and the group of chemicals known as persistent organic pollutants, in environmental compartments and biota. The wide variety of analyte/level/matrix/matrix property combinations available from several suppliers enables analysts to select CRMs which sufficiently match the properties of the samples they analyse routinely. Certified reference materials are playing an increasing role in the monitoring of environmental pollution. This paper is an attempt for describing the recent development of certified reference materials for road transportation, which mainly covers the combustion of fossil fuel, road side dust etc.