Mechanisms in the photocatalytic breakdown of persistent pharmaceutical and pesticide molecules over TiO2-based photocatalysts: A review.

Titanium dioxide (TiO2) based photocatalysts have been widely used as a photocatalyst for the degradation of various persistent organic compounds (POCs) in water and air. The degradation mechanism involves the generation of highly reactive oxygen species, such as hydroxyl radicals, which react with organic compounds to break down their chemical bonds and ultimately mineralize them into harmless products. In the case of pharmaceutical and pesticide molecules, TiO2 and modified TiO2 photocatalysis effectively degrade a wide range of compounds, including antibiotics, pesticides, and herbicides. The main downside is the production of dangerous intermediate products, which aren't frequently addressed in the literature that is currently available. The degradation rate of these compounds by TiO2 photocatalysis depends on factors such as the chemical structure of the compounds, the concentration of the TiO2catalyst, the intensity, the light source, and the presence of other organic or inorganic species in the solution. The comprehension of the degradation mechanism is explored to gain insights into the intermediates. Additionally, the utilization of response surface methodology (RSM) is addressed, offering a potential avenue for enhancing the scalability of the reactors. Overall, TiO2 photocatalysis is a promising technology for the treatment of pharmaceutical and agrochemical wastewater, but further research is needed to optimize the process conditions and to understand the fate and toxicity of the degradation products. .

Photocatalytic performance and interaction mechanism of reverse micelle synthesized Cu-TiO2 nanomaterials towards levofloxacin under visible LED light.

The degradation performance of Cu-TiO2 nanomaterials towards levofloxacin (LFX) antibiotic was investigated under an environmentally benign visible LED light source. Cu-TiO2 nanomaterials were prepared using the reverse micelle sol-gel method with different copper content ranging from 0.25 to 1.0 wt% concerning titania. Characterization of Cu-TiO2 samples was performed by XRD, TEM, UV-Vis, BET, ICP-MS, FTIR and XPS techniques. 0.5 wt% Cu-TiO2 showed crystallite size below 6 nm, surface area (69.85 m2/g) and significant visible light absorption capacity. Both Cu1+ and Cu2+ are formed in lower Cu-doped TiO2 samples, whereas only Cu2+ is present in higher Cu-doped TiO2 samples as evident in XPS analysis. 0.5 wt% Cu-TiO2 has shown the optimum photocatalytic degradation of 75.5% under 6 h. of a visible light source. FTIR analysis of LFX adsorbed Cu-TiO2 materials indicated the pollutant-catalyst interaction, where the declining trend was observed in photocatalytic degradation efficiency for higher Cu-doped TiO2 samples due to copper-LFX complex formation. Copper-LFX complexes are formed due to the presence of Cu2+ in higher Cu-doped TiO2 nanomaterials, which might have hindered the photocatalytic activity under visible light. Effects of initial pollutant concentration, catalyst loading and visible light intensity on the degradation of LFX are studied. Photocatalytic degradation pathways of LFX using best performing Cu-TiO2 material were also proposed based on the LC-MS analysis.

Thermoresponsive liquid crystalline formulation of Exemestane: Design and structural characterization.

Exemestane (EXE), a drug used for the treatment of breast cancer, has limited aqueous solubility of 0.08 mg/mL and log P∼ 4.22. The only available marketed formulation in form of tablets possess limitations of poor oral absorption (∼ 42 %), low solubility, extensive hepatic metabolism and numerous adverse effects due to its peripheral absorption. In order to address these issues, an alternative route of topical application is attempted through a lamellar liquid crystal based formulation. Pluronic® was used as stabilizer due to its higher surface activity and gelling properties. The solubility enhancement of EXE was achieved using liquid crystal formulation. We have investigated the effect of concentration of oil, Smix (surfactant - cosurfactant mixture) and EXE on lattice parameter, rheology and drug release for various combinations of the formulation. The small angle x-ray scattering (SAXS) measurement demonstrated an evidence of a lamellar structure with lattice parameter ∼15 nm, which increases with corresponding increase in oil and EXE due to increase in hydrophobic interactions leading to an expansion of lamella. The inter lamellar distance decreases at higher surfactant concentration, due to the distribution of the same amount of oil and drug within larger concentration of surfactant molecules. The rheology measurement exhibited gel like properties at low shear rate indicating soft gel formation, which converts to Newtonian type flowing liquid at higher shear rate. At constant Smix with increasing oil content, the viscosity decreases, which is attributed to the dilution of the lamellar structures with oil. The temperature sweep rheology reveals a change in the viscosity near physiological temperature, which may be attributed to the structural transition of lamellae. The formulation remains gel like at room temperature, which aids in proper application to skin and converts it to free flowing liquid above 37 °C. The invitro drug release of optimized formulation for 24 h was ∼ 38 % at 37 °C, which increased to 50 % at 42 °C. Accordingly, this formulation containing thermoresponsive lamellar liquid crystal gels of EXE represents a viable option for hyperthermia induced enhanced drug release. The characteristic and advantageous features offered by this formulation includes improved bioavailability of EXE due to enhanced solubility, permeability and absorption.

Mechanism of organic pollutants sorption from aqueous solution by cationic tunable organoclays.

A variety of quaternary ammonium salts with different carbon chain lengths were used to modify and convert montmorillonite clay to organoclays. The surface modification attributing to the wettability was investigated using various techniques. The zeta-potential values of all clays showed pH dependency. The prepared organoclays were utilized for phenol (protic) and nitrobenzene (aprotic) adsorption in a batch system, with pH and contact time as variables. The optimized removal for phenol and nitrobenzene within 30 min of equilibrium observed at pH 9.0 and 5.0, respectively. Observed equilibrium data followed the Langmuir monolayer adsorption kinetics with two adsorption sites (outer-layer and interlayer) for purified clay, and third additional sites for organoclays. Kinetic studies revealed that the adsorption of phenol was in the order of mono- > tetra- > di- > benzyl-substituted organoclays, which is similar to the hydrophilicity order. However, the exact opposite trend of adsorption was observed for nitrobenzene. From the performed quantitative study, it is inferred that -OH functional phenol and -NO2 functional nitrobenzene have an affinity towards the hydrophilic clay surface and hydrophobic surfaces of quaternary ammonium salts as its first preference, respectively. This study brings promising observations and implications to the vital structural-property relationship for selective adsorption of pollutants from aqueous solutions.

Quality by Design approach for an in situ gelling microemulsion of Lorazepam via intranasal route.

The present study illustrates the application of the concept of Quality by Design for development, optimization and evaluation of Lorazepam loaded microemulsion containing ion responsive In situ gelator gellan gum and carbopol 934. A novel approach involving interactions between surfactant and polymer was employed to achieve controlled drug release and reduced mucociliary clearance. Microemulsion formulated using preliminary solubility study and pseudo ternary phase diagrams showed significantly improved solubilization capacity of Lorazepam with 54.31±6.07nm droplets size. The effect of oil to surfactant/cosurfactant ratio and concentration of gelling agent on the drug release and viscosity of microemulsion gel (MEG) was evaluated using a 32 full factorial design. The gel of optimized formulation (MEG1) showed a drug release up to 6h of 97.32±1.35% of total drug loaded. The change in shear-dependent viscosity for different formulations on interaction with Simulated Nasal Fluid depicts the crucial role of surfactant-polymer interactions on the gelation properties along with calcium ions binding on the polymer chains. It is proposed that the surfactant-polymer interactions in the form of a stoichiometric hydrogen bonding between oxyethylene and carboxylic groups of the polymers used, provides exceptional ME stability and adhesion properties. Compared with the marketed formulation, optimized MEG showed improved pharmacodynamic activity. Ex vivo diffusion studies revealed significantly higher release for MEG compared to microemulsion and drug solution. MEG showed higher flux and permeation across goat nasal mucosa. According to the study, it could be concluded that formulation would successfully provide the rapid onset of action, and decrease the mucociliary clearance due to formation of in situ gelling mucoadhesive system.

Novel strategy involving surfactant-polymer combinations for enhanced stability of aqueous teflon dispersions.

Among various polymers, the Teflon surface possesses extreme hydrophobicity (low surface energy), which is of great interest to both industry and academia. In this report, we discuss the stability of aqueous Teflon dispersions (particle size range of 100-3000 nm) formulated by a novel strategy that involves distinct combinations of surfactant and polymer mixtures for dispersion stabilization. As a first step, the hydrophobic Teflon particles were wetted using a range of surfactants (ionic, Triton, Brij, Tween, and Pluronic series) bearing different hydrophobic-lipophilic balance (HLB) and further characterized by contact angle and liquid penetration in packed powder measurements. The interaction between hydrophobic chains of surfactants and the Teflon particle surface is the driving force resulting in wetting of the Teflon particle surface. Further, these wetted particles in aqueous solutions were mixed with various polymers, for example, poly(vinyl alcohol) (PVA), polyvinylpyrrolidone (PVP), hydroxyethyl cellulose (HEC), and hydroxypropyl methyl cellulose (HPMC). The rate of sedimentation for the final dispersions was measured using a pan suspended into the dispersion from a transducer recording the increase in weight with time. A significant stability was noticed for Teflon particles suspended in surfactant + polymer mixtures, which was linearly proportional to the concentration of added polymer. The observed phenomenon can be possibly explained by molecular interactions between the hydrophobic chains of surfactant molecules and polar groups in the polymer architecture. Brij-O10 + HEC mixture was found to be the best surfactant-polymer combination for decreasing the sedimentation of the Teflon particles in the final dispersion. As measured by dynamic light scattering (DLS), the hydrodynamic volume of the Teflon particles increases up to ∼55% in the final formulation. These dispersions could be further explored for various technological applications such as paints, inks, protective coatings, and so forth.

Controlling wettability and hydrophobicity of organoclays modified with quaternary ammonium surfactants.

The montmorillonite clays were modified with quaternary ammonium salts (QASs) having different alkyl chain lengths and a benzyl substitute group. The modified organoclays were characterized by different analytical techniques. The wettability and hydrophilicity/hydrophobicity of the modified clays was evaluated using water or oil penetration (adsorption) and contact angle measurements. The loading of QASs was in the range of 0.60-0.75 mmol/g per clay, irrespective of the type of QAS used for the modification of the clay. From the analytical investigations, it was elucidated that the modification of clay with QAS affected the structural, textural, and surface properties. Moreover, it should be noted that the modification with QAS having benzyl substitute group resulted in water-non-wettable and superhydrophobic surface, whereas clays modified with QAS without benzyl substitute group became more water-wettable and hydrophilic than the pristine clay. The presence of benzyl groups on the clay prevents water from penetration into the inter-clay or interlayer spacing, which yields the hydrophobic surface. These behaviors can arise from molecular arrangement of QAS on clay but not be attributable to the amount of QASs, and the surface area, size, and zeta potential of particles.

Dimerization of aromatic ureido pyrimidinedione derivatives: observation of an unexpected tautomer in the solid state.

Ureido pyrimidinedione derivatives with phenyl, 1-naphthyl and 2-naphthyl substituents form stable dimers via quadruple hydrogen bonding, but the 1-naphthyl derivative presents an unexpected tautomer in the solid state.

Physicochemical and photophysical studies on porphyrin-based donor-acceptor systems: effect of redox potentials on ultrafast electron-transfer dynamics.

We report new polychromophoric complexes, where different porphyrin (P) derivatives are covalently coupled to a redox active Mo center, MoL*(NO)Cl(X) (L* is the face-capping tridentate ligand tris(3,5-dimethylpyrazolyl) hydroborate and X is a phenoxide/pyridyl/amido derivative of porphyrin). The luminescence quantum yields of the bichromophoric systems (1, 2, and 5) were found to be an order of magnitude less than those of their respective porphyrin precursors. Transient absorption measurements revealed the formation of the porphyrin radical cation species (P(.)(+)) and photoinduced electron transfer from the porphyrin moiety to the respective Mo center in 1, 2, and 5. Electrochemical studies showed that the reduction potentials of the acceptor Mo centers in a newly synthesized pyridyl derivative (2; E(1/2)[Mo(I/0)] = approximately -1.4 V vs Ag/AgCl) and previously reported phenoxy- (1; E(1/2)[Mo(II/I)] = approximately -0.3 V vs Ag/AgCl) and amido- (3; E(1/2)[Mo(II/I)] = approximately -0.82 V vs Ag/AgCl) derivatives were varied over a wide range. Thus, studies with these complexes permitted us to correlate the probable effect of this potential gradient on the electron-transfer dynamics. Time-resolved absorption studies, following excitation at the Soret band of the porphyrin fragment in complexes 1, 2, and 5, established that forward electron transfer took place biexponentially from both S2 and S1 states of the porphyrin center to the Mo moiety with time constants 150-250 fs and 8-20 ps, respectively. In the case of MoL*(NO)ClX (where X is pyridine derivative 2), the high reduction potential for the MoI/0 couple allowed electron transfer solely from the S2 state of the porphyrin center. Time constants for the charge recombination process for all complexes were found to be 150-300 ps. Further, electrochemical and EPR studies with the trichromophoric complexes (3 and 4) revealed that the orthogonal orientation of the peripheral phenoxy/pyridyl rings negated the possibility of any electronic interaction between two paramagnetic Mo centers in the ground state and thereby the spin exchange, which otherwise was observed for related Mo complexes when two Mo centers are separated by a polyene system with comparable or larger separation distances.

Controlling structure from the bottom-up: structural and optical properties of layer-by-layer assembled palladium coordination-based multilayers.

Layer-by-layer assembly of two palladium coordination-based multilayers on silicon and glass substrates is presented. The new assemblies consist of rigid-rod chromophores connected by terminal pyridine moieties to palladium centers. Both colloidal palladium and PdCl2(PhCN)2 were used in order to determine the effect of the metal complex precursor on multilayer structure and optical properties. The multilayers were formed by an iterative wet-chemical deposition process at room temperature in air on a siloxane-based template layer. Twelve consecutive deposition steps have been demonstrated resulting in structurally regular assemblies with an equal amount of chromophore and palladium added in each molecular bilayer. The optical intensity characteristics of the metal-organic films are clearly a function of the palladium precursor employed. The colloid-based system has a UV-vis absorption maximum an order of magnitude stronger than that of the PdCl2-based multilayer. The absorption maximum of the PdCl2-based film exhibits a significant red shift of 23 nm with the addition of 12 layers. Remarkably, the structure and physiochemical properties of the submicron scale PdCl2-based structures are determined by the configuration of the approximately 15 angstroms thick template layer. The refractive index of the PdCl2-based film was determined by spectroscopic ellipsometry. Well-defined three-dimensional structures, with a dimension of 5 microm, were obtained using photopatterned template monolayers. The properties and microstructure of the films were studied by UV-vis spectroscopy, spectroscopic ellipsometry, atomic force microscopy (AFM), X-ray reflectivity (XRR), scanning electron microscopy (SEM), and aqueous contact angle measurements (CA).

Strategies for electrooptic film fabrication. Influence of pyrrole-pyridine-based dibranched chromophore architecture on covalent self-assembly, thin-film microstructure, and nonlinear optical response.

The new dibranched, heterocyclic "push-pull" chromophores bis{1-(pyridin-4-yl)-2-[2-(N-methylpyrrol-5-yl)]ethane}methane (1), 1-(pyrid-4-yl)-2-(N-methyl-5-formylpyrrol-2-yl)ethylene (2), {1-(N-methylpyridinium-4-yl)-2-[2-(N-methylpyrrol-5-yl)]ethane}{(1-(pyridin-4-yl)-2-[2-(N-methylpyrrol-5-yl)]ethane}methane (3), N-methyl-2-[1-(N-methylpyrid-4-yl)ethen-2-yl]-5-[pyrid-4-yl]ethen-2-yl]pyrrole iodide (4), bis{1-(N-methyl-4-pyridinio)-2-[2-(N-methylpyrrol-5-yl)]ethane}methane iodide (5), and N-methyl-2,5-[1-(N-methylpyrid-4-yl)ethen-2-yl]pyrrole iodide (6) have been synthesized and characterized. The neutral (1 and 2) and monomethyl salts (3 and 4) undergo chemisorptive reaction with iodobenzyl-functionalized surfaces to afford chromophore monolayers SA-1/SA-2 and SA-3/SA-4, respectively. Molecular structures and other physicochemical properties have been defined by (1)H NMR, optical spectroscopy, and XRD. Thin-film characterization by a variety of techniques (optical spectroscopy, specular X-ray reflectivity, atomic force microscopy, X-ray photoelectron spectroscopy, and angle-dependent polarized second harmonic generation) underscore the importance of the chromophore molecular architecture as well as film growth method on film microstructure and optical/electrooptic response.

Site affinity effects upon charge injection into siloxane-based monolayers.

Submolecular electrical information is successfully derived by applying element-specific, chemically resolved electrical measurements to a covalently bound stilbazole-based monolayer on a silicon substrate. Pronounced affinity effects are found in the response of adjacent atomic sites to external charge injection, accompanied by intramolecular polarization variations. These noncontact electrical read-out capabilities may provide a first entry toward the realization of organic devices based on submolecular electrical units.

Mixed-ligand complexes of ruthenium(II) containing new photoactive or electroactive ligands: synthesis, spectral characterization and DNA interactions.

Mixed-ligand ruthenium(II) complexes of three photoactive ligands, viz., (E)-1-[2-(4-methyl-2-pyridyl)-4-pyridyl]-2-(1-naphthyl)-1-ethene (mppne), (E)-1-(9-anthryl)-2-[2-(4-methyl-2-pyridyl)-4-pyridyl]-1-ethene (mppae) and (E)-1-[2-(4-methyl-2-pyridyl)-4-pyridyl]-2-(1-pyrenyl)-1-ethene (mpppe), in which a 2,2'-bipyridyl unit is linked via an ethylinic linkage to either a naphthalene, an anthracene or a pyrene chromophore and three electroactive ligands, viz., 4-(4-pyridyl)-1,2-benzenediol (catpy), 5,6-dihydroxy-1,10-phenanthroline (catphen) and 1,2-benzenediol (cat), were synthesized in good to moderate yields. Complexes [Ru(bpy)(2)(mppne)](2+) (bpy is 2, 2'-bipyridyl), [Ru(bpy)(2)(mppae)](2+), [Ru(bpy)(2)(mpppe)](2+), [Ru(bpy)(2)(sq-py)](+), [Ru(bpy)(2)(sq-phen)](+) and [Ru(phen)(2)(bsq)](+) (phen is 1,10-phenanthroline) were fully characterized by elemental analysis, IR, (1)H NMR, fast-atom bombardment or electron-impact mass, UV-vis and cyclic voltammetric methods. In the latter three complexes, the ligands catpy, catphen and cat are actually bound to the metal center as the corresponding semiquinone species, viz., 4-(4-pyridyl)-1,2-benzenedioleto(+I) (sq-py), 1,10-phenanthroline-5,6-dioleto(+I) (sq-phen) and 1,2-benzenedioleto(+I) (bsq), thus making the overall charge of the complexes formally equal to + 1 in each case. These three complexes are electron paramagnetic resonance active and exhibit an intense absorption band between 941 and 958 nm owing to metal-to-ligand charge transfer (MLCT, d (Ru)-->pi*(sq)) transitions. The other three ruthenium(II) complexes containing three photoactive ligands, mppne, mppae and mpppe, exhibit MLCT (d (Ru)-->pi*(bpy) ) bands in the 454-461-nm region and are diamagnetic. These can be characterized by the (1)H NMR method. [Ru(bpy)(2)(mppne)](2+), [Ru(bpy)(2)(mppae)](2+) and [Ru(bpy)(2)(mpppe)](2+) exhibit redox waves corresponding to the Ru(III)/Ru(II) couple along with the expected ligand (bpy and substituted bpy) based ones in their cyclic and differential pulse voltammograms (CH(3)CN, 0.1 M tetrabutylammonium hexafluorophosphate)-corresponding voltammograms of [Ru(bpy)(2)(sq-py)](+), [Ru(bpy)(2)(sq-phen)](+) and [Ru(phen)(2)(bsq)](+) are mainly characterized by waves corresponding to the quinone/semiquinone (q/sq) and semiquinone/1,2-diol (sq/cat) redox processes. The results of absorption and fluorescence titration as well as thermal denaturation studies reveal that [Ru(bpy)(2)(mppne)](2+) and [Ru(bpy)(2)(mppae)](2+) are moderate-to-strong binders of calf thymus DNA with binding constants ranging from 10(5) to 10(6) M(-1). Under the identical conditions of drug and light dose, the DNA (supercoiled pBR 322) photocleavage activities of these two complexes follow the order:[Ru(bpy)(2)(mppne)](2+)>[Ru(bpy)(2)(mppae)](2+), although the emission quantum yields follow the reverse order. The other ruthenium(II) complexes containing the semiquinone-based ligands are found to be nonluminescent and inefficient photocleavage agents of DNA. However, experiments shows that [Ru(bpy)(2)(sq)](+)-based complexes oxidize the sugar unit and could be used as mild oxidants for the sugar moiety of DNA. Possible explanations for these observations are presented.

A comparative Langmuir-Blodgett study on a set of covalently linked porphyrin-based amphiphiles: a detailed atomic force microscopic study.

A set of covalently linked phenyl-amidophenyl-substituted porphyrin amphiphiles with n-C15H31 tails have been synthesized and completely characterized. These amphiphiles form good Langmuir-Blodgett (LB) films at the air/water interface. Mean molecular areas for the series were measured from the isotherms and found to increase as the number of aliphatic chains increased from one to four. No influence of the subphase pH was observed on the isotherms. LB films can be transferred successfully onto different solid surfaces. The LB films were characterized using tapping mode atomic force microscopy (AFM). Bis-, tris-, and tetra-substituted porphyrins were found to be fairly good film-forming amphiphiles, whereas irregular aggregates were seen in the case of the monosubstituted porphyrin amphiphile. Multilayers were also formed with tetra-substituted amphiphiles on mica. Detailed AFM studies of tetra-substituted amphiphiles have been carried out to investigate the effect of preparation procedure and solid substrates on film formation and transfer. The absorption and fluorescence spectra for the amphiphiles in solution and LB films deposited onto mica and glass were recorded, which demonstrated the successful transfer of LB films onto the substrates and provided more information about the arrangement of porphyrin molecules within the LB films. For comparison, self-assembled monolayers (SAMs) and the cast thin films of the amphiphiles were prepared and characterized.

Synthesis, characterization, physicochemical, and photophysical studies of redox switchable NIR dye derived from a ruthenium-dioxolene-porphyrin system.

Newly synthesized semi-quinone derivatives of the ruthenium polypyridyl, covalently linked to a porphyrin core, show very high epsilon values (59,000-83,500 M(-1)cm(-1)) for the absorption band in the near infrared (NIR) region of the spectrum. Further, complexes 1-4 show an interesting reversible electrochromic behavior as a function of the redox state of the coordinated dioxolene functionality, and a switching phenomenon between bleaching and the restoration of the NIR peak could be achieved electrochemically. Thus, complexes 1-4 could be ideal candidate materials for NIR-active electrochromic devices. Ultrafast studies on 1 and its mononuclear components, 5-(3,4-dihydroxyphenyl)-10,15,20-triphenyl-21H,23H-porphyrin (H2L1) and Ru(bpy)2(bsq)+, reveal that there is no electron or energy transfer from the porphyrin to the Ru(bpy)2sq+ (bpy is 2,2'-bipyridine and sq is the deprotonated species of a substituted semi-quinone fragment) fragment or vice versa in 1. The observed decrease in the luminescence quantum yield for 1 compared to that of H2L1 can be ascribed to the increased nonradiative pathway due to higher vibronic coupling because of the direct linkage of the metal center to the porphyrin moiety.

Redox switchable NIR dye derived from ruthenium-dioxolene-porphyrin systems.

Newly synthesised Ru(bp)2(sq)(+)-derivatives, covalently linked to a porphyrin-core, show very high epsilon values in the NIR region; which exhibit fast on/off switching depending on the redox state of the coordinated dioxolene functionality.