Fabrication of polyaniline/graphene oxide composites for implementation in humidity sensing.

This work reports the measurement of impedance variations under various humidity conditions at frequency ranges between 100 Hz and 5 MHz. An electrochemical polymerization process has been used in the synthesis including varying the mass ratios of graphene oxide (GO) in polyaniline. An electrochemical deposition method has been used to produce a sample film on an indium tin oxide glass slide. The percentage relative humidity (RH%) of the samples has been estimated to be 20-90%. Impedance and humidity had an inverse relationship, i.e. the impedance value decreased with an increase in humidity. In contrast with platinum capacitive humidity sensors (HS), the GO-based HS had a sensitivity of 75-99%, which was ~10-fold more than that of traditional sensors. With three different parameter weight % of GO, the frequency range have been 100 Hz to 5 MHz and RH% has been found to 20-90%. The HS showed a fast response and recovery time. Therefore, GO appears to be a useful material for building HS with high sensitivity for a comprehensive approach.

Wound healing effect of ethanolic extract from Morning Glory (Ipomoea carnea Jacq.) leaves by using different models in rats.

Current study aims to evaluate the wound healing effect with apparent mechanism and determination of flavonoid (quercetin) from ethanol extract of Ipomea carnea jacq. leaves, family Convolvulaceae. The wound healing effect of ethanol extract from I. carnea jacq. leaves screened by excision and incision wound methods in rats. Five groups (Negative control, vehicle control, 2.5%w/w, 5% w/w ethanol extract ointment and 5%w/w Reference Ointment Povidone-iodine group) of rats (n-6) were experimentally wounded at dorsal portion of rats. The 5% w/w ointment of ethanol extract found significant wound contraction at 18-20th days, greater tensile strength, and biochemical parameters. Ethyl acetate fraction of ethanolic extract was analysed by RP-HPLC and retention time was found 3.042 min. The percentage of quercetin was found in I. carnea leaves as 0.842%. The results were supported by histopathological studies which showed augment in terms of collagen fibers, fibroblast and new blood vessels. The results were evidently exhibited the traditional uses of I. carnea leaves for wound healing effects. The healing effect may be attributed by presence of flavonoid and other compounds present in the leaves with free radical scavenging mechanism.

A Phase 3, Randomized, Double-Blind, Multicenter Study To Evaluate the Safety and Efficacy of Intravenous Iclaprim versus Vancomycin for Treatment of Acute Bacterial Skin and Skin Structure Infections Suspected or Confirmed To Be Due to Gram-Positive Pathogens (REVIVE-2 Study).

Iclaprim is a novel diaminopyrimidine antibiotic that may be an effective and safe treatment for serious skin infections. The safety and effectiveness of iclaprim were assessed in a global phase 3, double-blind, randomized, active-controlled trial. Six hundred thirteen adults with acute bacterial skin and skin structure infections (ABSSSIs) suspected or confirmed to be due to Gram-positive pathogens were randomized to iclaprim (80 mg) or vancomycin (15 mg/kg of body weight), both of which were administered intravenously every 12 h for 5 to 14 days. The primary endpoint was a ≥20% reduction in lesion size compared with that at the baseline at 48 to 72 h after the start of administration of study drug in the intent-to-treat population. Among patients randomized to iclaprim, 78.3% (231 of 295) met this primary endpoint, whereas 76.7% (234 of 305) of those receiving vancomycin met this primary endpoint (difference, 1.58%; 95% confidence interval, -5.10% to 8.26%). This met the prespecified 10% noninferiority margin. Iclaprim was well tolerated, with most adverse events being categorized as mild. In conclusion, iclaprim was noninferior to vancomycin in this phase 3 clinical trial for the treatment of acute bacterial skin and skin structure infections. On the basis of these results, iclaprim may be an efficacious and safe treatment for skin infections suspected or confirmed to be due to Gram-positive pathogens. (This trial has been registered at ClinicalTrials.gov under identifier NCT02607618.).

A Phase 3, Randomized, Double-Blind, Multicenter Study to Evaluate the Safety and Efficacy of Intravenous Iclaprim Vs Vancomycin for the Treatment of Acute Bacterial Skin and Skin Structure Infections Suspected or Confirmed to be Due to Gram-Positive Pathogens: REVIVE-1.

Background: Our objective in this study was to demonstrate the safety and efficacy of iclaprim compared with vancomycin for the treatment of patients with acute bacterial skin and skin structure infections (ABSSSIs). Methods: REVIVE-1 was a phase 3, 600-patient, double-blinded, randomized (1:1), active-controlled trial among patients with ABSSSI that compared the safety and efficacy of iclaprim 80 mg fixed dose with vancomycin 15 mg/kg, both administered intravenously every 12 hours for 5-14 days. The primary endpoint of this study was a ≥20% reduction in lesion size (early clinical response [ECR]) compared with baseline among patients randomized to iclaprim or vancomycin at the early time point (ETP), 48 to 72 hours after the start of administration of study drug in the intent-to-treat population. Results: ECR among patients who received iclaprim and vancomycin at the ETP was 80.9% (241 of 298) of patients receiving iclaprim compared with 81.0% (243 of 300) of those receiving vancomycin (treatment difference, -0.13%; 95% confidence interval, -6.42%-6.17%). Iclaprim was well tolerated in the study, with most adverse events categorized as mild. Conclusions: Iclaprim achieved noninferiority (10% margin) at ETP compared with vancomycin and was well tolerated in this phase 3 clinical trial for the treatment of ABSSSI. Based on these results, iclaprim appears to be an efficacious and safe treatment for ABSSSI suspected or confirmed to be due to gram-positive pathogens. Clinical Trials Registration: NCT02600611.

Comparison of drug delivery with autoinjector versus manual prefilled syringe and between three different autoinjector devices administered in pig thigh.

Parenteral routes of drug administration are often selected to optimize actual dose of drug delivered, assure high bioavailability, bypass first-pass metabolism or harsh gastrointestinal environments, as well as maximize the speed of onset. Intramuscular (IM) delivery can be preferred to intravenous delivery when initiating intravenous access is difficult or impossible. Drugs can be injected intramuscularly using a syringe or an automated delivery device (autoinjector). Investigation into the IM delivery dynamics of these methods may guide further improvements in the performance of injection technologies. Two porcine model studies were conducted to compare differences in dispersion of injectate volume for different methods of IM drug administration. The first study compared the differences in the degree of dispersion and uptake of injectate following the use of a manual syringe and an autoinjector. The second study compared the spatial spread of the injected formulation, or dispersion volume, and uptake of injectate following the use of five different autoinjectors (EpiPen(®) [0.3 mL], EpiPen(®) Jr [0.3 mL], Twinject(®) [0.15 mL, 0.3 mL], and Anapen(®) 300 [0.3 mL]) with varying needle length, needle gauge, and force applied to the plunger. In the first study, the autoinjector provided higher peak volumes of injectate, indicating a greater degree of dispersion, compared with manual syringe delivery. In the second study, EpiPen autoinjectors resulted in larger dispersion volumes and higher initial dispersion ratios, which decreased rapidly over time, suggesting a greater rate of uptake of injectate than the other autoinjectors. The differences in dispersion and uptake of injectate are likely the result of different functional characteristics of the delivery systems. Both studies demonstrate that the functional characteristics of the method for delivering IM injections impact the dispersion and uptake of the material injected, which could significantly affect the pharmacokinetics and, ultimately, the effectiveness of the drug.

Fabrication of Apigenin loaded gellan gum-chitosan hydrogels (GGCH-HGs) for effective diabetic wound healing.

The Apigenin (APN) was isolated from ethanolic extract of M. alba leaves and screened by in-vivo wound models (Diabetic and Dead space) in rats. Apigenin loaded hydrogel (HGs) was prepared using gellan gum-chitosan (GGCH) with PEG as a cross linker and characterized for various parameter like AFM, swelling property, entrapment efficiency and drug release. Further performance of hydrogel was evaluated by wound healing activity tested against wound contraction, collagen content, dried granuloma weights and antioxidant activity. The percent entrapment efficiency of optimized hydrogel found to be 87.15±1.20. APN loaded GGCH-HGs were able to release 96.11% APN in 24h. The level of superoxide dismutase (SOD) and catalase were found increased significantly in granuloma tissue of APN treated group. APN GGCH-HGs found higher wound healing effect in diabetic as well as normal wound tissues with significant antioxidant activity. Results proven the utility of prepared hydrogel (APN loaded GGCH-HGs) seems to be highly suitable for wound healing due to its unique properties of biocompatibility, biodegradability, moist nature and antioxidant effectiveness.

Ethosomes: versatile vesicular carriers for efficient transdermal delivery of therapeutic agents.

Delivery across skin is attractive due to its easy accessibility. However, drug delivery across skin is still a challenge in biomedical sciences. Over the past few decades, various successful novel devices and techniques have emerged to optimize drug delivery across skin whose obstructing behavior constricts entry of most of the therapeutic agents. Inability of various conventional vesicular formulations, e.g. liposomes to pass through the tapered (>30 nm) intercellular channels of stratum corneum, rendered invention of some lipid based vesicular carrier systems such as ethosomes which consist of phospholipid, ethanol and water. Ethosomes are non-invasive delivery carriers that enable drugs to reach the deep skin layers and/or the systemic circulation. In spite of their sophistication in conceptuality, they are exemplified by easiness in their preparation, safety and efficacy - a combination that can highly inflate their application. This review attempts to describe all aspects of ethosomes including roles and upshots of different excipients, various methods of preparation and characterizations, research reports on various drug deliveries, patent reports and future prospects.

Safety and effectiveness of long-term treatment with diazepam auto-injector administered by caregivers in an outpatient setting for the treatment of acute repetitive seizures.

OBJECTIVE: Part 1 of this phase III study was a randomized, double-blind, parallel-group, placebo-controlled, multicenter study of caregiver administered diazepam auto-injector (AI) in subjects with acute repetitive seizures (ARS) and demonstrated that diazepam AI was well-tolerated and significantly more effective than placebo AI in delaying the time to next seizure or rescue. Part 2 of this study, presented herein, was an open-label continuation to assess the long-term safety and effectiveness of diazepam AI for the treatment of ARS. METHODS: Of the 234 subjects randomized in part 1, 161 continued into part 2 and were provided open-label diazepam AI. Effectiveness measures were time to next seizure or rescue, number of subsequent rescues by type (rescue medication, emergency room visit, or other medical care), and number of subsequent seizures during the 12-h follow-up period. Safety data (adverse events and respirations <8/min) were also collected. RESULTS: During the open-label part 2 study, 129 subjects were administered a total of 1,380 diazepam AI treatments (median 4.5; range 1-118), of which 1,071 (77.6%) were effective with no subsequent seizure or rescue during the 12-h follow-up period. Median number of subsequent seizures experienced by subjects was one (range 0-20). Of the 1,380 administrations, 79 (5.7%) required use of rescue medication, 18 (1.3%) required a visit to an emergency room, and 6 (0.4%) required other rescue medical care. In most (75%) of subjects with treatment-emergent adverse events (TEAEs), TEAEs were mild or moderate in severity. Commonly reported treatment-related TEAEs were injection-site pain (10.9%), injection-site hemorrhage (7%), and injection-site bruising (6.3%). Although three subjects met the predefined respiratory rate threshold, none were considered clinically significant or reported as AEs. SIGNIFICANCE: Long-term treatment with diazepam AI administered by trained caregivers in an outpatient setting to treat ARS is a safe and effective option. A PowerPoint slide summarizing this article is available for download in the Supporting Information section here.

A double-blind, randomized, placebo-controlled trial of a diazepam auto-injector administered by caregivers to patients with epilepsy who require intermittent intervention for acute repetitive seizures.

PURPOSE: A diazepam auto­injector (AI) has been developed for intramuscular administration to treat acute repetitive seizures (ARS). The objective of this study was to evaluate the efficacy and safety of the diazepam AI when administered by caregivers to control an episode of ARS (ClinicalTrials.gov identifier NCT00319501). METHODS: In this phase III, randomized, double­blind, parallel­group, placebo­controlled, multicenter study, subjects with epilepsy on a stable antiepileptic drug regimen who required intermittent medical intervention to control ARS were randomized 1:1 to the placebo AI or the diazepam AI group. Subjects were stratified according to age (2­5, 6­11, ≥12 years). Dose (5, 10, 15, or 20 mg) was based on age and weight. A single dose of study medication was dispensed to be administered by caregivers in an outpatient setting when required. The primary end point was time to next seizure or rescue from 15 min to 12 h postdose. Secondary end points included rescue medication use, number of seizures postdose, caregiver and physician treatment assessments, and safety measures. KEY FINDINGS: Of 234 subjects randomized, 81/110 in the placebo AI group and 82/124 in the diazepam AI group were included in the intent­to­treat analysis. Baseline characteristics were similar for both groups. Time to next seizure or rescue was significantly longer in the diazepam AI group compared with the placebo AI group, with a hazard ratio of 0.55 (95% confidence interval [CI] 0.34­0.88; p = 0.012) for diazepam AI versus placebo AI, adjusted for age group. The 25th percentile for time to the next seizure or rescue was 1.18 h (95% CI 0.38­2.03) for placebo AI and 2.70 h (95% CI 0.48­11.42) for diazepam AI; the median was 5.9 h for placebo AI and was inestimable for diazepam AI due to the low number of events experienced by subjects in that group. The proportion of subjects using rescue medication postdose was 30% (24/81) placebo AI versus 17% (14/82) diazepam AI (p = 0.066). An event (seizure or rescue) occurred in 55.6% of subjects in the placebo AI group and 35.4% in the diazepam AI group. The number of seizures experienced during the 12­h postdose period was significantly lower for diazepam AI (median 0.0) compared with placebo AI (median 1.0; p = 0.010). Treatment­emergent adverse events (TEAEs) were reported in 44% (35/79) of subjects in the placebo AI group and 42% (34/81) in the diazepam AI group. The most common TEAEs reported were injection site pain (15% placebo AI, 17% diazepam AI) and injection site hemorrhage (6% placebo AI, 5% diazepam AI). SIGNIFICANCE: The diazepam AI was significantly more effective than placebo AI at delaying the next seizure or rescue. Secondary efficacy end points were generally supportive of the primary outcome. Diazepam AI administered by trained caregivers was effective for the treatment of ARS and was well tolerated, with a safety profile similar to placebo.

When precaution creates misunderstandings: the unintended effects of precautionary information on perceived risks, the EMF case.

In the past decade, growing public concern about novel technologies with uncertain potential long-term impacts on the environment and human health has moved risk policies toward a more precautionary approach. Focusing on mobile telephony, the effects of precautionary information on risk perception were analyzed. A pooled multinational experimental study based on a 5 × 2 × 2 factorial design was conducted in nine countries. The first factor refers to whether or not information on different types of precautionary measures was present, the second factor to the framing of the precautionary information, and the third factor to the order in which cell phones and base stations were rated by the study participants. The data analysis on the country level indicates different effects. The main hypothesis that informing about precautionary measures results in increased risk perceptions found only partial support in the data. The effects are weaker, both in terms of the effect size and the frequency of significant effects, across the various precautionary information formats used in the experiment. Nevertheless, our findings do not support the assumption that informing people about implemented precautionary measures will decrease public concerns.

Determination of the absolute configuration and solution conformation of a novel disubstituted pyrrolidine acid A by vibrational circular dichroism.

Compound A, a novel disubstituted pyrrolidine acid, is a member of a new class of agents that are potentially useful for the treatment of diabetes and dyslipidemia. The absolute configuration of this compound was determined by using vibrational circular dichroism (VCD). The results are in agreement with the assignments based on both X-ray analysis and the stereo-selective chemical synthesis. During VCD analysis, the solution conformation for a portion of compound A in CDCl(3) was also established. The compound is found to associate as an H-bonded carboxylic acid "dimer" in CDCl(3) solution, and VCD calculations on a model dimer fragment were required to establish the absolute configuration.

Efficient syntheses of four stable-isotope labeled (1R)-menthyl (1S,2S)-(+)-2-phenylcyclopropanecarboxylates.

Many carbenoid cyclopropanation reactions promoted by chiral catalysts give product mixtures reflecting impressive diastereo- and enantioselectivities. Few provide a single chiral product efficiently. This limitation has been overcome in cyclopropanations of styrene and isotopically labeled styrenes with alpha-diazoacetates. Convenient syntheses on a 20 g scale of each of four chiral isotopically labeled (1R)-menthyl (1S,2S)-2-phenylcyclopropanecarboxylates (the 1-d-3-(13)C, 1,(3S)-d2, 1,2,(3S)-d3, and 1,3,3-d3 isotopomers) of better than 99% ee have been realized.

Deuterium kinetic isotope effects and mechanism of the thermal isomerization of bicyclo[4.2.0]oct-7-ene to 1,3-cyclooctadiene.

The thermal conversion of cis-bicyclo[4.2.0]oct-7-ene to cis,cis-1,3-cyclooctadiene might involve a direct disrotatory ring opening, or it might possibly take place by way of cis,trans-1,3-cyclooctadiene. This cis,trans-diene might possibly form the more stable cis,cis isomer through a [1,5] hydrogen shift or a trans-to-cis isomerization about the trans double bond. Deuterium kinetic isotope effect determinations for the isomerizations of 2,2,5,5-d(4)-bicyclo[4.2.0]oct-7-ene and 7,8-d(2)-bicyclo[4.2.0]oct-7-ene rule out these two alternatives because the observed effects are much smaller than would be anticipated for these mechanisms: k(H)/k(D)(d(4)) at 250 degrees C is 1.17 (1.04 per D), and k(H)/k(D)(d(2)) at 238 degrees C is 1.20 (1.10 per D). The direct disrotatory ring opening route remains the preferred mechanism.

Thermal isomerization of (3-butenyl)cyclopropane to norbornane.

[reaction: see text] (3-Butenyl)cyclopropane isomerizes thermally to norbornane and gives rise to many other products. Deuterium and carbon-13-labeled versions of (3-butenyl)cyclopropane have been prepared and isomerized, establishing that the formation of norbornane involves cleavage of the cyclopropyl C2-C3 bond.