Self-discharge of electrochemical capacitors based on soluble or grafted quinone.

The self-discharge of hybrid electrochemical capacitors based on the redox activity of electrolyte additives or grafted species to the electrode material is investigated simultaneously for the cell and each individual electrode. Electrochemical capacitors using a redox-active electrolyte consisting in hydroquinone added to the electrolyte solution and a redox-active electrode based on anthraquinone-grafted carbon as a negative electrode are investigated. The results are analyzed by using Conway kinetic models and compared to those of a common electrochemical double layer capacitor. The self-discharge investigation is complemented by charge/discharge cycling and it is shown that processes affecting galvanostatic charge/discharge cycling and the self-discharge rate occurring at each electrode of an electrochemical capacitor are different but related to each other. The electrochemical capacitor containing hydroquinone in the electrolyte exhibits a much quicker self-discharge rate than that using a negative electrode based on grafted anthraquinone with a 50% decay of the cell voltage of the fully charged device in 0.6 and 6 h, respectively. The fast self-discharge of the former is due to the diffusion of benzoquinone molecules (formed at the positive electrode during charging) to the negative electrode, where they are reduced, causing a quick depolarization. The grafting of anthraquinone molecules on the carbon material of the negative electrode led to a much slower self-discharge, which nonetheless occurred, by the reaction of the reduced form of the grafted species with electrolyte species.

Electrochemical formation of an ultrathin electroactive film from 1,10-phenanthroline on a glassy carbon electrode in acidic electrolyte.

The electrochemical reduction of 1,10-phenanthroline in aqueous acidic electrolyte at a glassy carbon electrode led to the covalent modification of the electrode. Thereafter, the deposited film can be switched to an electroactive form by electrochemical oxidation. An electroactive film can be also generated by alternate reductive and oxidative voltammetric cycling in a 1,10-phenanthroline/aqueous sulfuric acid solution. First, the electrochemical procedure for the formation of a film is presented. Second, the morphology and chemical structure of 1,10-phenanthroline coatings were investigated by atomic force microscopy, time-of-flight secondary ion mass spectrometry, X-ray photoelectron spectroscopy, and electrochemical techniques. The ultrathin (<15 nm) electrodeposited films consist of oligomeric species. The coatings deposited in alternate and/or continuous reductive and oxidative steps contain oxygen atoms incorporated into the oligomer backbone. The preliminary results point out the formation of a dione derivative that is responsible for the electroactivity of the grafted layer.

Localized in situ generation of diazonium cations by electrocatalytic formation of a diazotization reagent.

A new one-step electrochemical approach for the localized generation of diazonium cations in the diffusion layer of an electrode by taking advantage of the electrocatalytic properties of the electrode for the formation of the diazotization agent (nitrite) is proposed. Once nitrite anions are formed by electrocatalytic reduction of nitrate, they immediately react with an arylamine to produce the corresponding diazonium cations, which can be electrochemically readily reduced at the electrode surface. By this method, spontaneous modification of the electrode surface can be avoided. Furthermore, because the potential of the electrochemical nitrate reduction depends strongly on the nature of the electrode material, we also demonstrate that selective grafting can be achieved on a surface, which consists of two different materials: copper-gold or copper-glassy carbon substrates.

Kinetics of electroless deposition: the copper-dimethylamine borane system.

A kinetic study of the electroless deposition of copper on gold, using dimethylamine borane (DMAB) as a reducing agent, has been carried out. The copper deposition rate in the electroless bath was determined to be 50 nm min(-1), through electrochemical stripping of the copper deposits as well as from direct measurements of the film thickness using atomic force microscopy (AFM). Comparison with a galvanic cell setup, where the two half-reactions were physically separated, yielded a lower deposition rate of 30 nm min(-1). An important kinetic effect of the surface on the oxidation of the reducing agent, and thus on the overall process, was therefore revealed. The efficiency of the process was measured over time, revealing the contribution of side reactions in the cathodic half-cell, particularly during the initial stages of the electroless process.

Functionalization of glassy carbon with diazonium salts in ionic liquids.

The paper reports on the chemical functionalization of glassy carbon electrodes with 4-bromobenzene (4-BBDT) and 4-(4'-nitrophenylazo)benzene diazonium tetrafluoroborate (4-NAB) salts in ionic liquids. The reaction was carried out at room temperature in air without any external electrical bias in either hydrophobic (1-butyl-3-methylimidazolium hexafluorophosphate) or hydrophilic (1-butyl-3-methylimidazolium methyl sulfate) ionic liquids. The resulting surfaces were characterized using X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and electrochemical measurements. Electrochemical reduction of the terminal nitro groups allowed the determination of surface coverage and formation of an amine-terminated carbon surfaces. The results were compared to glassy carbon chemically modified in an aqueous solution in the presence of 1% sodium dodecyl sulfate (SDS) with the same diazonium salt. Furthermore, Raman spectroscopy coupled with electrochemical measurements allowed to distinguish between the reduction of -NO2 to -NH2 group and the -N=N- to -NH-NH- bond.

Ion transfer processes at 4-(3-phenylpropyl)-pyridine/aqueous electrolyte/electrode triple phase boundary systems supported by graphite and by mesoporous TiO2.

Biphasic electrode systems allow electrochemical reactions to be driven in a microphase of organic liquid (typically 1-100 nL), which is coupled via ion transfer processes to the surrounding aqueous electrolyte medium. Microdroplet deposits on basal plane pyrolytic graphite as well as thin film deposits of the organic phase within a mesoporous titanium oxide host film are investigated. Cobalt tetraphenylporphyrin (CoTPP) is dissolved in the organic liquid 4-(3-phenylpropyl)-pyridine (PPP) and deposited in the form of microphases at suitable electrode surfaces. The electrode is immersed in aqueous electrolyte environments. It is shown that two stable and highly reversible one-electron metal-centred redox processes occur consistent with Co(III/II)TPP and Co(II/I)TPP in the presence of axial pyridine ligands. The electrochemical characteristics for both processes are strongly affected by the liquid/liquid ion exchange accompanying the redox processes. The potential for both the Co(III/II)TPP and the Co(II/I)TPP redox processes can be adjusted independently by the choice of the nature and concentration of the aqueous electrolyte. The reversible potential observed for the CoTPP metal complex is dominated by the Gibbs energy of transfer for the 'spectator ions'. Conditions can be chosen to eliminate ion transfer effects on the potential scale for biphasic oxidation and reduction processes.

Liquid / liquid ion-transfer processes at the dioctylphosphoric acid (N,N-didodecyl-N',N'-diethylphenylenediamine) / water (electrolyte) interface at graphite and mesoporous TiO2 substrates.

Biphasic electrode systems are studied for the case of the oxidation of the water-insoluble liquid N,N-didodecyl-N',N'-diethylphenylenediamine (DDPD) neat and dissolved in bis(2-ethylhexyl) phosphate (HDOP) and immersed in aqueous electrolyte media. The oxidation process in the absence of HDOP is accompanied by transfer of the anion (perchlorate or phosphate) from the water into the organic phase. However, in the presence of HDOP, oxidation is accompanied by proton exchange instead. This electrochemically driven proton exchange process occurs over a wide pH range. Organic microdroplet deposits of DDPD in HDOP at basal plane pyrolytic graphite electrodes are studied by voltammetric techniques and compared in their behavior to organic microphase deposits in mesoporous TiO2 thin films. The mesoporous TiO2 thin film acts as a host for the organic liquid and provides an alternative biphasic electrode system compared to the random microdroplet/graphite system. Two types of mesoporous TiO2 thin-film electrodes, (i) a 300-400-nm film on ITO and (ii) a 300-400-nm film on ITO sputter-coated with a 20-nm porous gold layer, are investigated.