Transsacral versus modified pelvic landmarks for percutaneous iliosacral screw placement--a computed tomographic analysis and cadaveric study.

The alar roots of the first sacral body are the usual confines for iliosacral screw (IS) placement when stabilizing a sacroiliac joint injury or sacral fracture. The traditional transsacral method of IS placement aligns the screw horizontally through the sacral ala on both the inlet and outlet views of the sacrum. A modified oblique method of IS placement aligns the screw in an oblique fashion, directed inferiorly to superiorly and posteriorly to anteriorly. The purpose of this investigation was to first define the S-1 segment boundaries for both methods of placement by analyzing the 3-dimensional (3-D) composites of 40 pelvic computed tomography (CT) scans, and then to evaluate the actual placement of ISs under fluoroscopy in 10 cadaveric pelves comparing the transsacral with the modified oblique techniques. Critical dimensions of 7.3 mm and 14.6 mm were considered as the diameter sizes of one and two cannulated screws, respectively. From the 3-D CT composites, the mean anterior/posterior (A/P) measurements were 10.9 mm and 18.0 mm, comparing transsacral with modified oblique methods, respectively. Moreover, 9/40 (22.5%) of the transsacral A/P measurements were <7.3 mm, while all of the modified oblique A/P measurements were >7.3 mm. The mean superior/inferior (S/I) measurements were 18.0 mm for transsacral and 26.2 mm for modified oblique placement. Out of 40 transsacral S/I measurements, 4 (10%) were <14.6 mm, while all the modified oblique S/I measurements were >14.6 mm. In the second part of this study, 10 uninjured cadaveric pelves had unilateral percutaneous IS placed under fluoroscopic guidance (inlet, outlet, and lateral projections) by one orthopedic traumatologist. The final position of all 10 screws was confirmed on fluoroscopy by two independent orthopedic trauma surgeons. The first 5 screws were placed by using transsacral pelvic landmarks. Modified landmarks guided the other 5 screws. The accuracy of final screw position was determined by "postoperative" CT scans interpreted by a blinded musculoskeletal radiologist. The screws inserted using transsacral pelvic landmarks were errant in 3 of the 5 cases. Neurovascular complications could be expected from the extraosseous position of all 3 screws. All 5 screws were located within the confines of the S-1 segment by means of the modified oblique technique. Thus, the modified oblique placement technique allowed greater accuracy and reliability over transsacral landmarks in placing percutaneous ISs. The use of the modified oblique pelvic landmarks is warranted during percutaneous iliosacral screw stabilization of the posterior pelvis.

Ipsilateral proximal and shaft femoral fractures: spectrum of injury involving the femoral neck.

Medical records and radiographs of 52 patients were studied after inclusion/exclusion criteria were met. The anatomical location of proximal femoral fractures that involved the femoral neck were examined after the primary fracture planes were drawn onto templates of the proximal femur. The AO classification is comprehensive and widely accepted. It has not been used in this injury combination in a large series of patients. Therefore, we classified each fracture by the AO method and then the AO classes were tabulated and analysed. Only three patterns of proximal femoral fractures appeared. The inferior aspect of the fracture line clustered in the inferomedial aspect of the femoral neck above an intact lesser trochanter in each separate pattern: 55 per cent were AO B2.1 (basilar); 35 per cent AO B2.3 (intracapsular); and 10 per cent AO A1.2 (pertrochanteric) fractures). Eleven fractures (21 per cent) were not detected initially. None of these were A1.2, eight were B2.1 and three were B2.3. Despite many proximal femoral fracture types reported in the literature only three fracture patterns were noted in this large study group. A new finding of clustering of these fractures in the inferomedial femoral neck was noted. AO class B2.1 fractures were the most common fractures missed at initial presentation and were the most common type seen.

Percutaneous iliosacral screw fixation: early treatment for unstable posterior pelvic ring disruptions.

OBJECTIVE: Open reduction and internal fixation of unstable posterior pelvic ring injury provides better bony stability and less long term morbidity than nonoperative treatment. However, open reduction and internal fixation of the posterior pelvis may involve substantial intraoperative blood loss, reported infection rates of 6 to 25%, and wound complications in 25%. Our hypothesis was that percutaneous cannulated iliosacral screws placed by fluoroscopic control would provide early, rapid, definitive stabilization with minimal blood loss, infection, and wound complications. DESIGN: A retrospective medical record and radiographic study. MATERIALS, METHODS, MEASUREMENTS AND MAIN RESULTS: Twenty consecutive patients with an unstable posterior pelvic ring injury treated by percutaneous fixation (41 screws) under fluoroscopic guidance were reviewed. Average patient age was 34 years, trauma score was 14.4 +/- 3.3, and Injury Severity Score was 22.9 +/- 10.6. Mechanisms were motor vehicle collisions (11), falls (3), crush injury (3), and pedestrian/auto (3). Pelvic injuries were classified as Tile B (5) or Tile C (15). Associated injuries were present in 80%. Seventy-five percent of patients underwent pelvic fixation less than 72 hours after injury with closed percutaneous screw placement achieved in 60%, assisted by open reduction in 25% or aided by anterior external fixation in 15%. Mean operative time was 52 minutes for patients requiring percutaneous screws only (7 of 20 patients, 35%), whereas average blood loss was 233 mL for all cases (including open anterior and posterior procedures). No loss of fixation or wound complications occurred during 9.6 months follow-up. CONCLUSIONS: Percutaneous iliosacral screw fixation for unstable posterior pelvic disruption provided early fixation with minimal operative time, minimal blood loss, and wound-related morbidity.

Complications associated with the Seidel nail.

The Seidel nail is an intramedullary locking device available for the treatment of humeral shaft fractures that require operative fixation. A retrospective review of 13 consecutive patients treated with the Seidel nail was undertaken to evaluate results, with attention to complications. No nerve palsies or infections occurred. Complications occurred in 46% of the patients and included intraoperative comminution associated with lateral placement of the pilot hole, instrumentation failure, and underreaming of the canal, resulting in iatrogenic fracture.