Screening of Palladium/Charcoal Catalysts for Hydrogenation of Diene Carboxylates with Isolated-Rings (Hetero)aliphatic Scaffold.

A series of seven palladium-containing composites, i.e., four Pd/C and three Pd(OH)2/C (Pearlman's catalysts), was prepared using modified common approaches to deposition of Pd or hydrated PdO on charcoal. All the composites were tested in the catalytic hydrogenation of diene carboxylates with the isolated-ring scaffold, e.g., 5,6-dihydropyridine-1(2H)-carboxylates with 2-(alkoxycarbonyl)cyclopent-1-en-1-yl and hex-1-en-1-yl substituents at the C(4)-position. The performance of the composites was also studied via the hydrogenation of quinoline as a model reaction. The composites were characterized by transmission and scanning electron microscopy (TEM and SEM), powder X-ray diffraction, and low-temperature N2 adsorption. It was found that the composites containing Pd nanoparticles (NPs) of 5-40 nm size were the most efficient catalysts for the hydrogenation of dienes, providing the reduced products with up to 90% yields at p(H2) = 100 atm, T = 30 °C for 24 h. The method of Pd NPs formation had more effect on the catalyst performance than the size of the NPs. The catalytic performance of Pearlman's catalysts (Pd(OH)2/C) in the hydrogenation of dienes was comparable to or lower than the performance of the Pd/C systems, though the Pearlman's catalysts were more efficient in the hydrogenation of quinoline.

Insight into the active site nature of zeolite H-BEA for liquid phase etherification of isobutylene with ethanol.

The nature of active acid sites of zeolite H-BEA with different Si/Al ratios (15-407) in liquid phase etherification of isobutylene with ethanol in a continuous flow reactor in the temperature range 80-180 °C has been explored. We describe and discuss data concerning the strength and concentration of acid sites of H-BEA obtained by techniques of stepwise (quasi-equilibrium) thermal desorption of ammonia, X-ray diffraction, low-temperature adsorption of nitrogen, FTIR spectroscopy of adsorbed pyridine and solid-state 27Al MAS NMR. The average values of the adsorption energy of NH3 on H-BEA were experimentally determined as 63.7; 91.3 and 121.9 mmol g-1 (weak, medium, and strong, respectively). In agreement with this, a correlation between the rate of ethyl-tert-butyl ether synthesis and the concentration of weak acid sites (E NH3 = 61.6-68.9 kJ mol-1) has been observed. It was concluded that the active sites of H-BEA for this reaction are Brønsted hydroxyls representing internal silanol groups associated with octahedrally coordinated aluminum in the second coordination sphere.

A family of zeolites with controlled pore size prepared using a top-down method.

The properties of zeolites, and thus their suitability for different applications, are intimately connected with their structures. Synthesizing specific architectures is therefore important, but has remained challenging. Here we report a top-down strategy that involves the disassembly of a parent zeolite, UTL, and its reassembly into two zeolites with targeted topologies, IPC-2 and IPC-4. The three zeolites are closely related as they adopt the same layered structure, and they differ only in how the layers are connected. Choosing different linkers gives rise to different pore sizes, enabling the synthesis of materials with predetermined pore architectures. The structures of the resulting zeolites were characterized by interpreting the X-ray powder-diffraction patterns through models using computational methods; IPC-2 exhibits orthogonal 12- and ten-ring channels, and IPC-4 is a more complex zeolite that comprises orthogonal ten- and eight-ring channels. We describe how this method enables the preparation of functional materials and discuss its potential for targeting other new zeolites.

Catalytic performance of Metal-Organic-Frameworks vs. extra-large pore zeolite UTL in condensation reactions.

Catalytic behavior of isomorphously substituted B-, Al-, Ga-, and Fe-containing extra-large pore UTL zeolites was investigated in Knoevenagel condensation involving aldehydes, Pechmann condensation of 1-naphthol with ethylacetoacetate, and Prins reaction of ß-pinene with formaldehyde and compared with large-pore aluminosilicate zeolite beta and representative Metal-Organic-Frameworks Cu3(BTC)2 and Fe(BTC). The yield of the target product over the investigated catalysts in Knoevenagel condensation increases in the following sequence: (Al)beta < (Al)UTL < (Ga)UTL < (Fe)UTL < Fe(BTC) < (B)UTL < Cu3(BTC)2 being mainly related to the improving selectivity with decreasing strength of active sites of the individual catalysts. The catalytic performance of Fe(BTC), containing the highest concentration of Lewis acid sites of the appropriate strength is superior over large-pore zeolite (Al)beta and B-, Al-, Ga-, Fe-substituted extra-large pore zeolites UTL in Prins reaction of ß-pinene with formaldehyde and Pechmann condensation of 1-naphthol with ethylacetoacetate.

Postsynthesis transformation of three-dimensional framework into a lamellar zeolite with modifiable architecture.

Mild treatment of zeolite UTL results in degradation of its structure with preservation of the initially present dense layers connected by D4R "bridges". The lamellar product obtained through this 3D to 2D zeolite conversion has been structurally modified similar to methodologies applied to layered zeolite precursors, which show the opposite 2D to 3D zeolite transformation.

The role of crystallization parameters for the synthesis of germanosilicate with UTL topology.

The investigation of the critical synthesis parameters of germanosilicate of UTL topology, possessing 14- and 12-rings, has been carried out in detail. (6R,10S)-6,10-Dimethyl-5-azoniaspiro[4.5]decane hydroxide was used as the structure-directing agent (SDA). The kinetics of the synthesis, the role of the Si/Ge ratio in the synthesis mixture, and the effect of the calcination procedure were investigated in relation to the crystallinity and textural properties of the synthesized material. The optimum synthesis time was found to be six days for Si/Ge and (Si+Ge)/SDA molar ratios of 2 and 1.7, respectively. The UTL zeolite crystallizes as small sheets of 10 mum in size. The micropore volume of the best crystals is 0.22 cm(3) g(-1) with a micropore diameter of 1.05 nm, based on DFT and Saito-Foley analyses of adsorption data.