An electrochemical technique for fabrication of Mn-54 sources towards characterization of gamma counting nuclear instruments.

Long lived sealed radioactive sources are used for the energy calibration and efficiency determination of counting systems used in the nuclear sector. Using a sulphate bath, a facile electrochemical method was developed by electrodeposition of 54Mn on 5 mm (φ) stainless steel substrates for the preparation of 54Mn sources for such uses. Inactive sources prepared under suitable experimental parameters characterized by XRD revealed that manganese is deposited in oxide form. SEM and EDS analyses of electrodeposited surfaces confirmed uniform distribution of elements and the absence of fractures, flaws, and spatial variations. Cyclic voltammetry (CV) scans provided information about the electrochemical processes involved in the deposition process. Uniform distribution of radioactivity on surface of source was ascertained by autoradiography. Swipe tests of the encapsulated sources confirmed negligible removable surface contamination. The 54Mn sources containing up to 185KBq of 54Mn on stainless steel discs were prepared. These sources along with other longer lived sources were supplied to various users as a package of radiation sources for characterization of gamma counting systems over a wide energy range.

Fabrication of miniature 141Ce sources by chemical deposition towards possible use in the performance evaluation of gamma cameras - A feasibility study.

141Ce sources were fabricated for quality assurance of gamma cameras. The fabrication process consisted of electro-deposition of Ni on a Cu sphere in 0.01 N H2SO4 containing 30 mg/mL H3BO3 and 50 µg of NiSO4·7H2O at pH 2-3 followed by deposition of 141Ce on it. > 95% deposition of 141Ce on substrate could be achieved at pH 5. Source core was loaded in custom-made Al holder. Autoradiography confirmed uniform activity distribution. SEM and EDS analyses confirmed deposition of Cerium on substrate.

Utilization of Chemical Deposition Technique for Preparation of Miniature 170Tm Sources and Preliminary Quality Assessment for Potential Use in Brachytherapy.

OBJECTIVE: This article describes the preparation of a 170Tm source by chemical deposition technique, its encapsulation in a titanium holder, and preliminary quality evaluation for potential utility as a brachytherapy source. METHODS: The procedure consisted of electrodeposition of Ni on a Cu wire followed by chemical deposition of 170Tm on it. Influence of feed solution pH, carrier Tm concentration, and reaction time were studied for optimum deposition of 170Tm on substrate. After sealing the source core in a titanium capsule, quality control tests were performed. Distribution of 170Tm on substrate was evaluated by autoradiography. Inactive Tm source was characterized by scanning electron microscope (SEM) and energy-dispersive X-ray (EDS) analyses. RESULTS: Under optimized conditions (pH 5, 10 µg Tm carrier, 5 h), 170Tm source core could be prepared by deposition of >95% of 170Tm radioactivity on substrate. Swipe tests and immersion tests on encapsulated sources confirmed that removable radioactivity and radioactivity leakage levels were within stipulated limits. Autoradiography of 170Tm source confirmed uniformity of radioactivity distribution. While SEM analysis confirmed good adhesion of Tm on substrate, EDS analysis confirmed elemental constituents of the Tm-deposited substrate. CONCLUSION: The objective of preparing a 170Tm source by chemical deposition for potential brachytherapy applications could be successfully achieved.

Endoxifen, 4-Hydroxytamoxifen and an Estrogenic Derivative Modulate Estrogen Receptor Complex Mediated Apoptosis in Breast Cancer.

Estrogen therapy was used to treat advanced breast cancer in postmenopausal women for decades until the introduction of tamoxifen. Resistance to long-term estrogen deprivation (LTED) with tamoxifen and aromatase inhibitors used as a treatment of breast cancer inevitably occurs, but unexpectedly low-dose estrogen can cause regression of breast cancer and increase disease-free survival in some patients. This therapeutic effect is attributed to estrogen-induced apoptosis in LTED breast cancer. Here, we describe modulation of the estrogen receptor (ER) liganded with antiestrogens (endoxifen and 4-hydroxytamoxifen) and an estrogenic triphenylethylene (TPE), ethoxytriphenylethylene (EtOXTPE), on estrogen-induced apoptosis in LTED breast cancer cells. Our results show that the angular TPE estrogen (EtOXTPE) is able to induce the ER-mediated apoptosis only at a later time compared with planar estradiol in these cells. Using real-time polymerase chain reaction, chromatin immunoprecipitation, western blotting, molecular modeling, and X-ray crystallography techniques, we report novel conformations of the ER complex with an angular estrogen EtOXTPE and endoxifen. We propose that alteration of the conformation of the ER complexes, with changes in coactivator binding, governs estrogen-induced apoptosis through the protein kinase regulated by RNA-like endoplasmic reticulum kinase sensor system to trigger an unfolded protein response.

A chemical deposition method to prepare circular planar 147Pm sources for the measurement of particulate emission in air.

This paper describes a method for preparing a circular planar source of 17 mm diameter containing approximately 400 kBq of (147)Pm employing a wet chemical deposition technique to be used in dust monitors. This manuscript described the overall process concept and experimental procedure. The technical feasibility, efficiency of the process and product quality has been evaluated. The quality of the prepared source in terms of nonleachability, uniform distribution of activity and stability, which are necessary attributes of a radioactive source were evaluated and found to be satisfactory.

A novel method for the preparation of large-area 90Sr/90Y sources for the calibration of hand contamination monitors.

This paper describes a method for the preparation of large-area (90)Sr/(90)Y polymer film sources for the calibration of hand contamination monitors. The process consists of solvent extraction of predictable quantity of (90)Sr into an organic solvent containing di-tert-butyl-cyclohexano-18-crown-6 (DCH18C6), formation of a polymeric solution of poly(methyl methacrylate) (PMMA), pouring the (90)Sr-embedded polymer solution over a surface of a defined area followed by evaporation to create a thin film and peeling-off of the radioactive PMMA film. Quality control tests of the radioactive films were carried out to ensure nonleachability, uniform distribution of activity and stability. Sources having 5kBq±428Bq were prepared using this method and routinely used for calibration of contamination monitors.

Preparation of spherical 57Co source for the calibration of intra-operative gamma probe.

This paper describes an electrochemical method for deposition of a thin layer of (57)Co on the outer surface of a copper sphere of 5mm diameter intended to be used as a point radioactive source. A description of the electrolytic cell, the process of deposition and the assay of the (57)Co activity are presented. About 1.48MBq (∼40µCi) of (57)Co could be deposited using the described method. The quality of the prepared source in terms of nonleachability, uniform distribution of activity and stability, which are necessary attributes to be ensured before application were evaluated and found to be satisfactory.

An electrochemical method for the preparation of 63Ni source for the calibration of thermoluminescence dosimeter (TLD).

A novel electrochemical approach for preparation of (63)Ni sources for their application as check-light source for the calibration of thermo luminescence dosimeters (TLD) is described here. Required amount of (63)Ni on a copper substrate could be deposited by optimizing the experimental parameters such as current density, time of deposition, pH of the electrolyte and nickel ion concentration in the bath. (63)Ni sources of strength approximately 3.7 MBq could be prepared by electrodeposition at constant current on the copper matrix. Quality assurance tests to ensure nonleachability, uniform distribution of activity and stability of the sources that are necessary before application were performed.

Molecular characterization of a B-ring unsaturated estrogen: implications for conjugated equine estrogen components of premarin.

Conjugated equine estrogens (CEEs) are routinely used for hormone replacement therapy (HRT), making it important to understand the activities of individual estrogenic components. Although 17beta-estradiol (17beta-E2), the most potent estrogen in CEE, has been extensively characterized, the actions of nine additional less potent estrogens are not well understood. Structural differences between CEEs and 17beta-E2 result in altered interactions with the two estrogen receptors (ERalpha and ERbeta) and different biological activities. To better understand these interactions, we have determined the crystal structure of the CEE analog, 17beta-methyl-17alpha-dihydroequilenin (NCI 122), in complex with the ERalpha ligand-binding domain and a peptide from the glucocorticoid receptor-interacting protein 1 (GRIP1) coactivator. NCI 122 has chemical properties, including an unsaturated B-ring and 17alpha-hydroxyl group, which are shared with some of the estrogens found in CEEs. Structural analysis of the NCI 122-ERalpha LBD-GRIP1 complex, combined with biochemical and cell-based comparisons of CEE components, suggests that factors such as decreased ligand flexibility, decreased ligand hydrophobicity and loss of a hydrogen bond between the 17-hydroxyl group and His524, contribute significantly to the reduced potency of CEEs on ERalpha.

Superficial granulomatous pyoderma gangrenosum of the penis: a case report.

Classic type of pyoderma gangrenosum (PG) is an uncommon ulceronecrotic cutaneous disease of uncertain aetiology characterised by broad zones of confluent ulceration with violaceous undermined margins. Some 50% of cases are associated with systemic diseases. The superficial granulomatous variant of pyoderma gangrenosum (SGPG) of the external genitalia is extremely rare Patients with this condition develop single or multiple ulcerated skin lesions often with sinus tract formation. The majority of these lesions were found on the trunk and limbs. SGPG is less likely to be associated with underlying disease processes than classic PG. We present a 58 year-old with recalcitrant penile ulceration demonstrated to be SGPG on biopsy. Although rare and poorly recognised, the histological features are sufficiently typical to allow the correct diagnosis to be established.

Identification of ligands with bicyclic scaffolds provides insights into mechanisms of estrogen receptor subtype selectivity.

Estrogen receptors alpha (ERalpha) and beta (ERbeta) have distinct functions and differential expression in certain tissues. These differences have stimulated the search for subtype-selective ligands. Therapeutically, such ligands offer the potential to target specific tissues or pathways regulated by one receptor subtype without affecting the other. As reagents, they can be utilized to probe the physiological functions of the ER subtypes to provide information complementary to that obtained from knock-out animals. A fluorescence resonance energy transfer-based assay was used to screen a 10,000-compound chemical library for ER agonists. From the screen, we identified a family of ERbeta-selective agonists whose members contain bulky oxabicyclic scaffolds in place of the planar scaffolds common to most ER ligands. These agonists are 10-50-fold selective for ERbeta in competitive binding assays and up to 60-fold selective in transactivation assays. The weak uterotrophic activity of these ligands in immature rats and their ability to stimulate expression of an ERbeta regulated gene in human U2OS osteosarcoma cells provides more physiological evidence of their ERbeta-selective nature. To provide insight into the molecular mechanisms of their activity and selectivity, we determined the crystal structures of the ERalpha ligand-binding domain (LBD) and a peptide from the glucocorticoid receptor-interacting protein 1 (GRIP1) coactivator complexed with the ligands OBCP-3M, OBCP-2M, and OBCP-1M. These structures illustrate how the bicyclic scaffolds of these ligands are accommodated in the flexible ligand-binding pocket of ER. A comparison of these structures with existing ER structures suggests that the ERbeta selectivity of OBCP ligands can be attributed to a combination of their interactions with Met-336 in ERbeta and Met-421 in ERalpha. These bicyclic ligands show promise as lead compounds that can target ERbeta. In addition, our understanding of the molecular determinants of their subtype selectivity provides a useful starting point for developing other ER modulators belonging to this relatively new structural class.

A prospective pilot study to validate the management protocol for patients presenting with acute urinary retention: a community-based, nonhospitalised protocol.

Acute urinary retention (AUR) in males is managed conventionally by hospital admission, alpha-adrenergic therapy, and trial without catheter. To reduce inpatient bed pressures, we set up a protocol to manage such patients in the community. We review our results in this paper. We performed a prospective study of male patients presenting to our acute admissions ward and Accident and Emergency department over 6 months. Patients with chronic urinary retention, macroscopic haematuria, sepsis, urinary tract infection, and/or serum creatinine >130 mmol/l were excluded from the study. Those enrolled were catheterised, commenced on alfuzosin (10 mg nocte), and discharged to the community. A trial without catheter (TWOC) was performed 5-7 days later. QoL/IPSS, peak flow rate, and residual volume assessment were performed following successful TWOC 3 months later. Thirty-one male patients with a median age of 69 years were studied and the median residual volume following catheterisation was 900 ml. The aetiology of AUR was benign prostatic hyperplasia (BPH) in 29 patients and constipation in the remaining 2 patients. TWOC was successful in 19 patients (61.3%) following first TWOC, 26 (83.9%) following second trial of voiding. The mean peak flow rate was 6.5 ml/sec and postvoid scan 165 ml, following an immediate TWOC. At 3 months follow-up, mean peak flow rate was 13.2 ml/sec, postvoid scan 26.5 ml, IPSS 4.5, and QoL score was 2. This study has shown that AUR can be managed safely and effectively in the community. Effective communication with the nurse urology specialist, general practitioner, and emergency department are crucial for the successful implementation of the protocol.

NAD+ and metal-ion dependent hydrolysis by family 4 glycosidases: structural insight into specificity for phospho-beta-D-glucosides.

The import of disaccharides by many bacteria is achieved through their simultaneous translocation and phosphorylation by the phosphoenolpyruvate-dependent phosphotransferase system (PEP-PTS). The imported phospho-disaccharides are, in some cases, subsequently hydrolyzed by members of the unusual glycoside hydrolase family GH4. The GH4 enzymes, occasionally found also in bacteria such as Thermotoga maritima that do not utilise a PEP-PTS system, require both NAD(+) and Mn(2+) for catalysis. A further curiosity of this family is that closely related enzymes may show specificity for either alpha-d- or beta-d-glycosides. Here, we present, for the first time, the three-dimensional structure (using single-wavelength anomalous dispersion methods, harnessing extensive non-crystallographic symmetry) of the 6-phospho-beta-glycosidase, BglT, from T.maritima in native and complexed (NAD(+) and Glc6P) forms. Comparison of the active-center structure with that of the 6-phospho-alpha-glucosidase GlvA from Bacillus subtilis reveals a striking degree of structural similarity that, in light of previous kinetic isotope effect data, allows the postulation of a common reaction mechanism for both alpha and beta-glycosidases. Given that the "chemistry" occurs primarily on the glycone sugar and features no nucleophilic attack on the intact disaccharide substrate, modulation of anomeric specificity for alpha and beta-linkages is accommodated through comparatively minor structural changes.

YfiT from Bacillus subtilis is a probable metal-dependent hydrolase with an unusual four-helix bundle topology.

YfiT, a 19-kDa polypeptide from Bacillus subtilis, belongs to a small sequence family with members predominantly from Gram positive bacteria. We have determined the crystal structure of YfiT in complex with Ni(2+) to a resolution of 1.7 A. YfiT exists as a dimer and binds Ni(2+) in a 1:1 stoichiometry. The protein has an unusual four-helix bundle topology and coordinates Ni(2+) in an octahedral geometry with three conserved histidines and three waters. Although there is no similarity in their overall structures, the coordination geometry of the metal and the residues that constitute the putative active site in YfiT are similar to those of metalloproteases such as thermolysin. Our structural analyses suggest that YfiT might function as a metal-dependent hydrolase.

Novel catalytic mechanism of glycoside hydrolysis based on the structure of an NAD+/Mn2+ -dependent phospho-alpha-glucosidase from Bacillus subtilis.

GlvA, a 6-phospho-alpha-glucosidase from Bacillus subtilis, catalyzes the hydrolysis of maltose-6'-phosphate and belongs to glycoside hydrolase family GH4. GH4 enzymes are unique in their requirement for NAD(H) and a divalent metal for activity. We have determined the crystal structure of GlvA in complex with its ligands to 2.05 A resolution. Analyses of the active site architecture, in conjunction with mechanistic studies and precedent from the nucleotide diphosphate hexose dehydratases and other systems, suggest a novel mechanism of glycoside hydrolysis by GlvA that involves both the NAD(H) and the metal.

An unusual mechanism of glycoside hydrolysis involving redox and elimination steps by a family 4 beta-glycosidase from Thermotoga maritima.

Among the numerous well-characterized families of glycosidases, family 4 appears to be the anomaly, requiring both catalytic NAD+ and a divalent metal for activity. The unusual cofactor requirement prompted the proposal of a mechanism involving key NAD+-mediated redox steps as well as elimination of the glycosidic oxygen. Primary kinetic isotope effects for the 2- and 3-deutero substrate analogues, isotopic exchange with solvent, and structural analysis of a 6-phospho-beta-glucosidase, BglT (E.C. 3.2.1.6), provided evidence in support of the proposed mechanism, which has striking resemblances to that of the sugar dehydratases. Furthermore, analysis of the stereochemical outcome indicated that family 4 enzymes are retaining glycosidases.

Complexes of RecA with LexA and RecX differentiate between active and inactive RecA nucleoprotein filaments.

The bacterial RecA protein has been the dominant model system for understanding homologous genetic recombination. Although a crystal structure of RecA was solved ten years ago, we still do not have a detailed understanding of how the helical filament formed by RecA on DNA catalyzes the recognition of homology and the exchange of strands between two DNA molecules. Recent structural and spectroscopic studies have suggested that subunits in the helical filament formed in the RecA crystal are rotated when compared to the active RecA-ATP-DNA filament. We examine RecA-DNA-ATP filaments complexed with LexA and RecX to shed more light on the active RecA filament. The LexA repressor and RecX, an inhibitor of RecA, both bind within the deep helical groove of the RecA filament. Residues on RecA that interact with LexA cannot be explained by the crystal filament, but can be properly positioned in an existing model for the active filament. We show that the strand exchange activity of RecA, which can be inhibited when RecX is present at very low stoichiometry, is due to RecX forming a block across the deep helical groove of the RecA filament, where strand exchange occurs. It has previously been shown that changes in the nucleotide bound to RecA are associated with large motions of RecA's C-terminal domain. Since RecX binds from the C-terminal domain of one subunit to the nucleotide-binding core of another subunit, a stabilization of RecA's C-terminal domain by RecX can likely explain the inhibition of RecA's ATPase activity by RecX.

Bordetella pertussis extract induces increase in the activities of glycolytic enzymes in mouse liver.

The hypoglycemic effect of Bordetella pertussis (Challenge strain No.18323) purified cell extract (protein with traces of carbohydrates, 2 mg%) administered (0.1 mg/100 g body wt. i.v.) into mice on the activities of the key regulatory enzymes, viz. glucokinase, phosphofructokinase, pyruvate kinase, glyceraldehyde phosphodehydrogenase, glucose-6-phosphate dehydrogenase (G-6-PD) and lactate dehydrogenase, of glycolytic pathway in liver has been studied at varying intervals after injection. The maximum hypoglycaemic effect was observed at the end of 12 hr, while activities of all the enzymes studied showed significant enhancement after 18 hr, thus suggesting increased glucose utilization towards the formation of pyruvate. Actinomycin D is found to inhibit stimulation of G-6-PD activity in B. pertussis treated animals, thereby indicating the role of B. pertussis in synthesis of this enzyme.