Tuning almond lipase features by the buffer used during immobilization: The apparent biocatalysts stability depends on the immobilization and inactivation buffers and the substrate utilized.

The lipase from Prunus dulcis almonds was inactivated under different conditions. At pH 5 and 9, enzyme stability remained similar under the different studied buffers. However, when the inactivation was performed at pH 7, there were some clear differences on enzyme stability depending on the buffer used. The enzyme was more stable in Gly than when Tris was employed for inactivation. Then, the enzyme was immobilized on methacrylate beads coated with octadecyl groups at pH 7 in the presence of Gly, Tris, phosphate and HEPES. Its activity was assayed versus triacetin and S-methyl mandelate. The biocatalyst prepared in phosphate was more active versus S-methyl mandelate, while the other ones were more active versus triacetin. The immobilized enzyme stability at pH 7 depends on the buffer used for enzyme immobilization. The buffer used in the inactivation and the substrate used determined the activity. For example, glycine was the buffer that promoted the lowest or the highest stabilities depending on the substrate used to quantify the activities.

Effect of Tris Buffer in the Intensity of the Multipoint Covalent Immobilization of Enzymes in Glyoxyl-Agarose Beads.

Tris is an extensively used buffer that presents a primary amine group on its structure. In the present work trypsin, chymotrypsin and penicillin G acylase (PGA) were immobilized/stabilized on glyoxyl agarose in presence of different concentrations of Tris (from 0 to 20 mM). The effects of the presence of Tris during immobilization were studied analyzing the thermal stability of the obtained immobilized biocatalysts. The results indicate a reduction of the enzyme stability when immobilized in the presence of Tris. This effect can be observed in inactivations carried out at pH 5, 7, and 9 with all the enzymes assayed. The reduction of enzyme stability increased with the Tris concentration. Another interesting result is that the stability reduction was more noticeable for immobilized PGA than in the other immobilized enzymes, the biocatalysts prepared in presence of 20 mM Tris lost totally the activity at pH 7 just after 1 h of inactivation, while the reference at this time still kept around 61 % of the residual activity. These differences are most likely due to the homogeneous distribution of the Lys groups in PGA compared to trypsin and chymotrypsin (where almost 50% of Lys group are in a small percentage of the protein surface). The results suggest that Tris could be affecting the multipoint covalent immobilization in two different ways, on one hand, reducing the number of available glyoxyl groups of the support during immobilization, and on the other hand, generating some steric hindrances that difficult the formation of covalent bonds.

Effect of Concentrated Salts Solutions on the Stability of Immobilized Enzymes: Influence of Inactivation Conditions and Immobilization Protocol.

This paper aims to investigate the effects of some salts (NaCl, (NH4)2SO4 and Na2SO4) at pH 5.0, 7.0 and 9.0 on the stability of 13 different immobilized enzymes: five lipases, three proteases, two glycosidases, and one laccase, penicillin G acylase and catalase. The enzymes were immobilized to prevent their aggregation. Lipases were immobilized via interfacial activation on octyl agarose or on glutaraldehyde-amino agarose beads, proteases on glyoxyl agarose or glutaraldehyde-amino agarose beads. The use of high concentrations of salts usually has some effects on enzyme stability, but the intensity and nature of these effects depends on the inactivation pH, nature and concentration of the salt, enzyme and immobilization protocol. The same salt can be a stabilizing or a destabilizing agent for a specific enzyme depending on its concentration, inactivation pH and immobilization protocol. Using lipases, (NH4)2SO4 generally permits the highest stabilities (although this is not a universal rule), but using the other enzymes this salt is in many instances a destabilizing agent. At pH 9.0, it is more likely to find a salt destabilizing effect than at pH 7.0. Results confirm the difficulty of foreseeing the effect of high concentrations of salts in a specific immobilized enzyme.

Effect of amine length in the interference of the multipoint covalent immobilization of enzymes on glyoxyl agarose beads.

Trypsin, chymotrypsin, penicillin G acylase and ficin extract have been stabilized by immobilization on glyoxyl agarose, adding different aliphatic compounds bearing a primary amine group during the immobilization: ethyl amine, butyl amine, hexyl amine (at concentrations ranging from 0 to 20 mM) and octyl amine (from 0 to 10 mM) to analyze their effects on the immobilized enzyme stability. As expected, the presence of amines reduced the intensity of the enzyme-support multipoint covalent attachment, and therefore the enzyme stability. However, it is clear that this effect is higher using octyl amine for all enzymes (in some cases the enzyme immobilized in the presence of 10 mM octyl amine was almost inactivated while the reference kept over 50 % of the initial activity). This way, it seems that the most important effect of the presence of aminated compounds came from the generation of steric hindrances to the enzyme/support multi-reaction promoted by the ammines that are interacting with the aldehyde groups. In some instances, just 1 mM of aminated compounds is enough to greatly decrease enzyme stability. The results suggested that, if the composition of the enzyme extract is unknown, to eliminate small aminated compounds may be necessary to maximize the enzyme-support reaction.

Use of Alcalase in the production of bioactive peptides: A review.

This review aims to cover the uses of the commercially available protease Alcalase in the production of biologically active peptides since 2010. Immobilization of Alcalase has also been reviewed, as immobilization of the enzyme may improve the final reaction design enabling the use of more drastic conditions and the reuse of the biocatalyst. That way, this review presents the production, via Alcalase hydrolysis of different proteins, of peptides with antioxidant, angiotensin I-converting enzyme inhibitory, metal binding, antidiabetic, anti-inflammatory and antimicrobial activities (among other bioactivities) and peptides that improve the functional, sensory and nutritional properties of foods. Alcalase has proved to be among the most efficient proteases for this goal, using different protein sources, being especially interesting the use of the protein residues from food industry as feedstock, as this also solves nature pollution problems. Very interestingly, the bioactivities of the protein hydrolysates further improved when Alcalase is used in a combined way with other proteases both in a sequential way or in a simultaneous hydrolysis (something that could be related to the concept of combi-enzymes), as the combination of proteases with different selectivities and specificities enable the production of a larger amount of peptides and of a smaller size.

Use of glyoxyl-agarose immobilized ficin extract in milk coagulation: Unexpected importance of the ficin loading on the biocatalysts.

A protein extract obtained from fig tree (Ficus carica) latex containing ficin activity was immobilized on glyoxyl agarose. Different biocatalyst loadings were used (3, 10, 30 and 85 mg/g). When casein was used as substrate, the expressed activities were 60%, 58%, 41% and 14%, respectively, very likely due to casein diffusional limitations. As expected, an increase of the concentration of either free or immobilized ficin reduced the clotting time of casein solution and milk. However, maintaining the same amount of ficin, lowly loaded ficin biocatalysts were unable to produce the clotting neither of the casein solutions nor of the milk, while highly loaded catalysts produced a good aggregate. Performing the proteolytic milk treatment at 4 °C to prevent aggregation and them incubating the milk at 40 °C, the use of immobilized enzyme in milk clotting gave coagulum yields of 19%, 24% and 27% for the 10 mg/g, 30 mg/g and 85 mg/g immobilized ficin respectively, while free ficin gave a yield of around 20% under similar ficin concentrations.

Amination of ficin extract to improve its immobilization on glyoxyl-agarose: Improved stability and activity versus casein.

Ficin extract has been aminated using ethylenediamine and carbodiimide to transform all exposed carboxylic groups into amino groups, retaining around 80% of activity versus benzoyl-d,l-arginine p-nitroanilide hydrochloride (BANA) and 90% versus casein. This aminated enzyme was then immobilized on glyoxyl agarose beads. After optimization of the immobilization protocol (immobilization at pH 10 for just 1 h), the new biocatalyst was compared to that obtained using the non-aminated enzyme. Activity versus BANA was lower, but was higher versus casein. The new biocatalyst was more stable than the reference mainly at pH 7. The new biocatalyst permitted to have a more linear course and a higher hydrolysis yield of casein at 75 °C. Moreover, the activity of the new preparations was significantly higher than the reference or the free enzyme in 8 M urea, at pH 7 and 55 °C. The enzyme in an overloaded biocatalyst exhibited a much higher specific activity versus casein (75% of the low loaded biocatalysts) than the non-aminated enzyme (only 30%), suggesting a more appropriate enzyme orientation that decreased steric hindrances. Finally, the enzyme was reused for 5 cycles of casein hydrolysis at 40 °C and pH 7 without any decrease in enzyme activity.