Probing a battery electrolyte drop with ambient pressure photoelectron spectroscopy.

Operando ambient pressure photoelectron spectroscopy in realistic battery environments is a key development towards probing the functionality of the electrode/electrolyte interface in lithium-ion batteries that is not possible with conventional photoelectron spectroscopy. Here, we present the ambient pressure photoelectron spectroscopy characterization of a model electrolyte based on 1M bis(trifluoromethane)sulfonimide lithium salt in propylene carbonate. For the first time, we show ambient pressure photoelectron spectroscopy data of propylene carbonate in the liquid phase by using solvent vapor as the stabilizing environment. This enables us to separate effects from salt and solvent, and to characterize changes in electrolyte composition as a function of probing depth. While the bulk electrolyte meets the expected composition, clear accumulation of ionic species is found at the electrolyte surface. Our results show that it is possible to measure directly complex liquids such as battery electrolytes, which is an important accomplishment towards true operando studies.

Electronic structure dynamics in a low bandgap polymer studied by time-resolved photoelectron spectroscopy.

Means to measure the temporal evolution following a photo-excitation in conjugated polymers are a key for the understanding and optimization of their function in applications such as organic solar cells. In this paper we study the electronic structure dynamics by direct pump-probe measurements of the excited electrons in such materials. Specifically, we carried out a time-resolved photoelectron spectroscopy (TRPES) study of the polymer PCPDTBT by combining an extreme ultraviolet (XUV) high harmonic generation source with a time-of-flight spectrometer. After excitation to either the 1st excited state or to a higher excited state, we follow how the electronic structure develops and relaxes on the electron binding energy scale. Specifically, we follow a less than 50 fs relaxation of the higher exited state and a 10 times slower relaxation of the 1st excited state. We corroborate the results using DFT calculations. Our study demonstrates the power of TRPES for studying photo-excited electron energetics and dynamics of solar cell materials.

Photoelectron Spectroscopy for Chemical Analysis.

Photoelectron spectroscopy started its modern development in the fifties based on techniques for studies of nuclear decay. Since then, photoelectron spectroscopy has undergone a dramatic expansion of application and is now a prime research tool in basic and applied science. This progress has been largely due to the concomitant development of photon sources, sample handling and electron energy analyzers. The present article describes some of the salient features of modern photoelectron spectroscopy and its applications with particular emphasis on energy relevant issues.

A high pressure x-ray photoelectron spectroscopy experimental method for characterization of solid-liquid interfaces demonstrated with a Li-ion battery system.

We report a methodology for a direct investigation of the solid/liquid interface using high pressure x-ray photoelectron spectroscopy (HPXPS). The technique was demonstrated with an electrochemical system represented by a Li-ion battery using a silicon electrode and a liquid electrolyte of LiClO4 in propylene carbonate (PC) cycled versus metallic lithium. For the first time the presence of a liquid electrolyte was realized using a transfer procedure where the sample was introduced into a 2 mbar N2 environment in the analysis chamber without an intermediate ultrahigh vacuum (UHV) step in the load lock. The procedure was characterized in detail concerning lateral drop gradients as well as stability of measurement conditions over time. The X-ray photoelectron spectroscopy (XPS) measurements demonstrate that the solid substrate and the liquid electrolyte can be observed simultaneously. The results show that the solid electrolyte interphase (SEI) composition for the wet electrode is stable within the probing time and generally agrees well with traditional UHV studies. Since the methodology can easily be adjusted to various high pressure photoelectron spectroscopy systems, extending the approach towards operando solid/liquid interface studies using liquid electrolytes seems now feasible.

Solvent-dependent structure of the I3(-) ion derived from photoelectron spectroscopy and ab initio molecular dynamics simulations.

Ab initio molecular dynamics (MD) simulations of the solvation of LiI3 in four different solvents (water, methanol, ethanol, and acetonitrile) are employed to investigate the molecular and electronic structure of the I3(-) ion in relation to X-ray photoelectron spectroscopy (XPS). Simulations show that hydrogen-bond rearrangement in the solvation shell is coupled to intramolecular bond-length asymmetry in the I3(-) ion. By a combination of charge analysis and I 4 d core-level XPS measurements, the mechanism of the solvent-induced distortions has been studied, and it has been concluded that charge localization mediates intermolecular interactions and intramolecular distortion. The approach involving a synergistic combination of theory and experiment probes the solvent-dependent structure of the I3(-) ion, and the geometric structure has been correlated with the electronic structure.

Photoelectron Spectroscopy for Chemical Analysis.

Photoelectron spectroscopy started its modern development in the fifties based on techniques for studies of nuclear decay. Since then, photoelectron spectroscopy has undergone a dramatic expansion of application and is now a prime research tool in basic and applied science. This progress has been largely due to the concomitant development of photon sources, sample handling and electron energy analyzers. The present article describes some of the salient features of modern photoelectron spectroscopy and its applications with particular emphasis on energy relevant issues.

A versatile photoelectron spectrometer for pressures up to 30 mbar.

High-pressure photoelectron spectroscopy is a rapidly developing technique with applications in a wide range of fields ranging from fundamental surface science and catalysis to energy materials, environmental science, and biology. At present the majority of the high-pressure photoelectron spectrometers are situated at synchrotron end stations, but recently a small number of laboratory-based setups have also emerged. In this paper we discuss the design and performance of a new laboratory based high pressure photoelectron spectrometer equipped with an Al Kα X-ray anode and a hemispherical electron energy analyzer combined with a differentially pumped electrostatic lens. The instrument is demonstrated to be capable of measuring core level spectra at pressures up to 30 mbar. Moreover, valence band spectra of a silver sample as well as a carbon-coated surface (graphene) recorded under a 2 mbar nitrogen atmosphere are presented, demonstrating the versatility of this laboratory-based spectrometer.

Energy level alignment in TiO2/metal sulfide/polymer interfaces for solar cell applications.

Semiconductor sensitized solar cell interfaces have been studied with photoelectron spectroscopy to understand the interfacial electronic structures. In particular, the experimental energy level alignment has been determined for complete TiO2/metal sulfide/polymer interfaces. For the metal sulfides CdS, Sb2S3 and Bi2S3 deposited from single source metal xanthate precursors, it was shown that both driving forces for electron injection into TiO2 and hole transfer to the polymer decrease for narrower bandgaps. The energy level alignment results were used in the discussion of the function of solar cells with the same metal sulfides as light absorbers. For example Sb2S3 showed the most favourable energy level alignment with 0.3 eV driving force for electron injection and 0.4 eV driving force for hole transfer and also the most efficient solar cells due to high photocurrent generation. The energy level alignment of the TiO2/Bi2S3 interface on the other hand showed no driving force for electron injection to TiO2, and the performance of the corresponding solar cell was very low.

Atomic and electronic structures of interfaces in dye-sensitized, nanostructured solar cells.

Key processes in nanostructured dye-sensitized solar cells occur at material interfaces containing, for example, oxides, dye molecules, and hole conductors. A detailed understanding of interfacial properties is therefore important for new developments and device optimization. The implementation of X-ray-based spectroscopic methods for atomic-level understanding of such properties is reviewed. Specifically, the use of the chemical and element sensitivity of photoelectron spectroscopy, hard X-ray photoelectron spectroscopy, and resonant photoelectron spectroscopy for investigating interfacial molecular and electronic properties are described; examples include energy matching, binding configurations, and molecular orbital composition. Finally, results from the complete oxide/dye/hole-conductor systems are shown and demonstrate how the assembly itself can affect the molecular and electronic structure of the materials.

Solvent dependence of the electronic structure of I(-) and I3(-).

We present synchrotron-based I4d photoelectron spectroscopy experiments of solutions from LiI and LiI3 in water, ethanol, and acetonitrile. The experimentally determined solvent-induced binding energy shifts (SIBES) for the monatomic I(­) anion are compared to predictions from simple Born theory, PCM calculations, as well as multiconfigurational quantum chemical spectral calculations from geometries obtained through molecular dynamics of solvated clusters. We show that the SIBES for I(­) explicitly depend on the details of the hydrogen bonding configurations of the solvent to the I(­) and that static continuum models such as the Born model cannot capture the trends in the SIBES observed both in experiments and in higher-level calculations. To extend the discussion to more complex polyatomic anions, we also performed experiments on I3(­) and I(­)/I3(­) mixtures in different solvents and the results are analyzed in the perspective of SIBES. The experimental SIBES values indicate that the solvation effects even for such similar anions as I(­) and I3(­) can be rather different in nature.

Electronic Structure of TiO2/CH3NH3PbI3 Perovskite Solar Cell Interfaces.

The electronic structure and chemical composition of efficient CH3NH3PbI3 perovskite solar cell materials deposited onto mesoporous TiO2 were studied using photoelectron spectroscopy with hard X-rays. With this technique, it is possible to directly measure the occupied energy levels of the perovskite as well as the TiO2 buried beneath and thereby determine the energy level matching of the interface. The measurements of the valence levels were in good agreement with simulated density of states, and the investigation gives information on the character of the valence levels. We also show that two different deposition techniques give results indicating similar electronic structures.

Collective hydrogen-bond dynamics dictates the electronic structure of aqueous I3(-).

The molecular and electronic structures of aqueous I3(-) and I(-) ions have been investigated through ab initio molecular dynamics (MD) simulations and photoelectron (PE) spectroscopy of the iodine 4d core levels. Against the background of the theoretical simulations, data from our I4d PE measurements are shown to contain evidence of coupled solute-solvent dynamics. The MD simulations reveal large amplitude fluctuations in the I-I distances, which couple to the collective rearrangement of the hydrogen bonding network around the I3(-) ion. Due to the high polarizability of the I3(-) ion, the asymmetric I-I vibration reaches partially dissociated configurations, for which the electronic structure resembles that of I2 + I(-). The charge localization in the I3(-) ion is found to be moderated by hydrogen-bonding. As seen in the PE spectrum, these soft molecular vibrations are important for the electronic properties of the I3(-) ion in solution and may play an important role in its electrochemical function.

The new ambient-pressure X-ray photoelectron spectroscopy instrument at MAX-lab.

The new instrument for near-ambient-pressure X-ray photoelectron spectroscopy which has been installed at the MAX II ring of the Swedish synchrotron radiation facility MAX IV Laboratory in Lund is presented. The new instrument, which is based on a SPECS PHOIBOS 150 NAP analyser, is the first to feature the use of retractable and exchangeable high-pressure cells. This implies that clean vacuum conditions are retained in the instrument's analysis chamber and that it is possible to swiftly change between near-ambient and ultrahigh-vacuum conditions. In this way the instrument implements a direct link between ultrahigh-vacuum and in situ studies, and the entire pressure range from ultrahigh-vacuum to near-ambient conditions is available to the user. Measurements at pressures up to 10(-5) mbar are carried out in the ultrahigh-vacuum analysis chamber, while measurements at higher pressures are performed in the high-pressure cell. The installation of a mass spectrometer on the exhaust line of the reaction cell offers the users the additional dimension of simultaneous reaction data monitoring. Moreover, the chosen design approach allows the use of dedicated cells for different sample environments, rendering the Swedish ambient-pressure X-ray photoelectron spectroscopy instrument a highly versatile and flexible tool.

Versatile high-repetition-rate phase-locked chopper system for fast timing experiments in the vacuum ultraviolet and x-ray spectral region.

A novel light chopper system for fast timing experiments in the vacuum-ultraviolet (VUV) and x-ray spectral region has been developed. It can be phase-locked and synchronized with a synchrotron radiation storage ring, accommodating repetition rates in the range of ~8 to ~120 kHz by choosing different sets of apertures and subharmonics of the ring frequency (MHz range). Also the opening time of the system can be varied from some nanoseconds to several microseconds to meet the needs of a broad range of applications. Adjusting these parameters, the device can be used either for the generation of single light pulses or pulse packages from a microwave driven, continuous He gas discharge lamp or from storage rings which are otherwise often considered as quasi-continuous light sources. This chopper can be utilized for many different kinds of experiments enabling, for example, unambiguous time-of-flight (TOF) multi-electron coincidence studies of atoms and molecules excited by a single light pulse as well as time-resolved visible laser pump x-ray probe electron spectroscopy of condensed matter in the valence and core level region.

Mapping the frontier electronic structures of triphenylamine based organic dyes at TiO2 interfaces.

The frontier electronic structures of a series of organic dye molecules containing a triphenylamine moiety, a thiophene moiety and a cyanoacrylic acid moiety have been investigated by photoelectron spectroscopy (PES), X-ray absorption spectroscopy (XAS), X-ray emission spectroscopy (XES) and resonant photoelectron spectroscopy (RPES). The experimental results were compared to electronic structure calculations on the molecules, which are used to confirm and enrich the assignment of the spectra. The approach allows us to experimentally measure and interpret the basic valence energy level structure in the dye, including the highest occupied energy level and how it depends on the interaction between the different units. Based on N 1s X-ray absorption and emission spectra we also obtain insight into the structure of the excited states, the molecular orbital composition and dynamics. Together the results provide an experimentally determined energy level map useful in the design of these types of materials. Included are also results indicating femtosecond charge redistribution at the dye/TiO(2) interface.

Electronic and molecular structures of organic dye/TiO(2) interfaces for solar cell applications: a core level photoelectron spectroscopy study.

The electronic and molecular properties of three organic dye molecules with the general structure donor-linker-anchor have been investigated using core level photoelectron spectroscopy (PES). The molecules contain a diphenylaniline donor unit, a thiophene linker unit, and cyanoacrylic acid or rhodanine-3-acetic acid anchor units. They have been investigated both in the form of a multilayer and adsorbed onto nanoporous TiO(2) and the experimental results were also compared with DFT calculations. The changes at the dye-sensitized TiO(2) surface due to the modification of either the donor unit or the anchor unit was investigated and the results showed important differences in coverage as well as in electronic and molecular surface properties. By measuring the core level binding energies, the sub-molecular properties were characterized and the result showed that the adsorption to the TiO(2) influences the energy levels of the sub-molecular units differently.

Molecular dynamics study of heparin based coatings.

Heparin based surface coatings can be used to improve the biocompatibility of metallic surfaces such as vascular stents. Here, we report molecular dynamics simulations of a macromolecular conjugate of heparin used to prepare such surfaces. The structural properties of the heparin conjugate are investigated for different degrees of hydration, to allow comparison with spectroscopic results. The simulations show that the polymer becomes more compact with an increasing degree of inter-chain interactions as the hydration increases. This is also accompanied by changes in the interaction patterns among the heparin chains, where counter ions become looser associated with the disaccharide units and their strong interactions can be partly replaced by water molecules and heparin hydroxyl groups. The structural information that can be obtained from computer simulations of this type of coatings can be very valuable for understanding and further development of functional interfaces, since very little is known experimentally regarding their detailed structural properties.

Photoelectron spectroscopy studies of the functionalization of a silicon surface with a phosphorylcholine-terminated polymer grafted onto (3-aminopropyl)trimethoxysilane.

The structure of a biomimetic phosphorylcholine (PC)-functionalized poly(trimethylene carbonate) (PC-PTMC-PC), linked to a silicon substrate through an aminolysis reaction at 120 degrees C with (3-aminopropyl)trimethoxysilane (APTMS), was studied using photoelectron spectroscopy. Two chemical states were found for the unreacted APTMS amine, a neutral state and a protonated state, where the protonated amine on average was situated closer to the silicon substrate than the neutral amine. The experiments also indicated the presence of a third chemical state, where amines interact with unreacted silanol groups. The PTMC chains of the grafted films were found to consist of only 2-3 repeat units, with the grafted chains enriched in the zwitterionic end group, suggesting that these groups are attracted to the surface. This was further supported by the experiments showing that the PC groups were situated deeper within the film.

Experimental evidence for sub-3-fs charge transfer from an aromatic adsorbate to a semiconductor.

The ultrafast timescale of electron transfer processes is crucial to their role in many biological systems and technological devices. In dye-sensitized solar cells, the electron transfer from photo-excited dye molecules to nanostructured semiconductor substrates needs to be sufficiently fast to compete effectively against loss processes and thus achieve high solar energy conversion efficiencies. Time-resolved laser techniques indicate an upper limit of 20 to 100 femtoseconds for the time needed to inject an electron from a dye into a semiconductor, which corresponds to the timescale on which competing processes such as charge redistribution and intramolecular thermalization of excited states occur. Here we use resonant photoemission spectroscopy, which has previously been used to monitor electron transfer in simple systems with an order-of-magnitude improvement in time resolution, to show that electron transfer from an aromatic adsorbate to a TiO(2) semiconductor surface can occur in less than 3 fs. These results directly confirm that electronic coupling of the aromatic molecule to its substrate is sufficiently strong to suppress competing processes.