Amphiphilic Ionic Liquids Capable to Formulate Organized Systems in an Aqueous Solution, Designed by a Combination of Traditional Surfactants and Commercial Drugs.

The present review describes the state of the art in the conversion of pharmaceutically active ingredients (API) in amphiphilic Ionic Liquids (ILs) as alternative drug delivery systems. In particular, we focus our attention on the compounds generated by ionic exchange and without original counterions which generate different systems in comparison with the simple mixtures. In water, these new amphiphiles show similar or even better properties as surfactants in comparison with their precursors. Cations such as 1-alkyl-3-methyl-imidazolium and anions such as dioctyl sulfosuccinate or sodium dodecyl sulfate appear as the amphiphilic components most studied. In conclusion, this work shows interesting information on several promissory compounds and they appear as an interesting challenge to extend the application of ILs in the medical field.

Deciphering Solvation Effects in Aqueous Binary Mixtures by Fluorescence Behavior of 4-Aminophthalimide: The Comparison Between Ionic Liquids and Alcohols as Cosolvents.

Ionic liquids (ILs) have received attention for many years due to them being very promising as green solvent substitutes, but they are not fully understood, especially their behavior dissolved in other solvents, for example, water. Thus, the goal of this contribution is to show insight into the different IL-water mixtures interaction. In this way, two protic ILs (PILs), ethylammonium nitrate (EAN) and 1-methylimidazolium acetate (MIA), mixed with water were investigated. To study the PILs-water interaction, the unique spectroscopical behavior in water of the molecular probe 4-aminophthalimide (4-AP) was used. 4-AP emission spectra show hypsochromic shifting by changing the excitation wavelength and, using time-resolved spectroscopy, can be detected by a blue shifting with time. Also, the water mixture of an aprotic IL, 1-methyl-3-butylimidazolium tetrafluoroborate (bmimBF4), and three alcohols, methanol (MeOH), 2-propanol (2-PrOH), and t-butanol (t-BOH), were investigated for comparison. Our results show that the water-ILs interaction is dominated by the size of the IL components, in particular, the cation size. Thus, in MIA-water and bmimBF4-water mixtures, 4-AP is mostly solvated by the IL, even at a low IL molar fraction, as in the t-BOH-water mixture. This finding is especially interesting when ILs-water mixtures are used as a solvent in an organic reaction, where it may call attention to water probably not being the solvent that is interacting with the reactants.

How the external solvent in biocompatible reverse micelles can improve the alkaline phosphatase behavior.

In the last decade, the nature of the nonpolar solvents that can be part of reverse micelles (RMs) has been the topic of several investigations to improve their applications. In this sense, the hydrolysis of 1-naphthyl phosphate catalyzed by the enzyme alkaline phosphatase (AP) was used as a probe to investigate the effect of the change of the external solvent on RMs formulated with the anionic surfactant sodium diethylhexyl sulfosuccinate (AOT). As external nonpolar solvents, two biocompatible lipophilic esters, isopropyl myristate and methyl laurate, and the traditional nonpolar solvents, n-heptane and benzene, were used. The results were compared among the RMs investigated and with the reaction in homogeneous media. Thus, the effect of the nanoconfinement as well as the impact of the replacement of a conventional external nonpolar solvent by biocompatible solvents were analyzed. The results indicate that the catalytic efficiency in the AOT RMs is larger than that in homogeneous media, denoting a different hydration level over the AP enzyme, which is directly related to the different degrees of nonpolar solvent penetration to the RM interface. Our findings demonstrated that toxic solvents such as n-heptane and benzene can be replaced by nontoxic ones (isopropyl myristate or methyl laurate) in AOT RMs without affecting the performance of micellar systems as nanoreactors, making them a green and promising alternative toward efficient and sustainable chemistry.

Biocompatible Solvents and Ionic Liquid-Based Surfactants as Sustainable Components to Formulate Environmentally Friendly Organized Systems.

In this review, we deal with the formation and application of biocompatible water-in-oil microemulsions commonly known as reverse micelles (RMs). These RMs are extremely important to facilitate the dissolution of hydrophilic and hydrophobic compounds for biocompatibility in applications in drug delivery, food science, and nanomedicine. The combination of two wisely chosen types of compounds such as biocompatible non-polar solvents and ionic liquids (ILs) with amphiphilic character (surface-active ionic liquids, SAILs) can be used to generate organized systems that perfectly align with the Green Chemistry concepts. Thus, we describe the current state of SAILs (protic and aprotic) to prepare RMs using non-polar but safe solvents such as esters derived from fatty acids, among others. Moreover, the use of the biocompatible solvents as the external phase in RMs and microemulsions/nanoemulsions with the other commonly used biocompatible surfactants is detailed showing the diversity of preparations and important applications. As shown by multiple examples, the properties of the RMs can be modified by changes in the type of surfactant and/or external solvents but a key fact to note is that all these modifications generate novel systems with dissimilar properties. These interesting properties cannot be anticipated or extrapolated, and deep analysis is always required. Finally, the works presented provide valuable information about the use of biocompatible RMs, making them a green and promising alternative toward efficient and sustainable chemistry.

Is it Necessary for the Use of Fluorinated Compounds to Formulate Reverse Micelles in a Supercritical Fluid? Searching the Best Cosurfactant to Create "Green" AOT Reverse Micelle Media.

Herein, we report the effect of employing two different alcohols, such as n-pentanol and 2,2,3,3,4,4,5,5-octafluoro pentanol (from now on F-pentanol), into 1,4-bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles (RMs), to determine the interfacial activity and establish the best candidate to act as a cosurfactant in supercritical RMs. Dynamic light scattering (DLS), Fourier transform infrared (FT-IR), and fluorescence emission spectroscopy allowed us to determine and understand the behavior of alkanols in RMs. As a result, we found interesting displacements of alkanol molecules within the RMs, suggesting that the electrostatic interaction between SO3- and Na+ weakens because of new interactions of n-pentanol with SO3- through H-bonds, changing the curvature of the micellar interface. According to FT-IR and DLS studies, F-pentanol forms a RM polar core interacting through intermolecular H-bonds, suggesting no perturbations of the AOT RM interface. Hence, n-pentanol was selected as a cosurfactant to form supercritical RMs, which is confirmed by red edge excitation shift studies, using C343 as a molecular probe. Herein, we were able to create RMs under supercritical conditions without the presence of modified surfactants, fluorinated or multitailed compounds, which, to the best of our knowledge, was not shown before.

Influence of the AOT Counterion Chemical Structure on the Generation of Organized Systems.

The impact of the imidazolium counterion structure on the organized systems formed by the surfactant 1,4-bis-2-ethylhexylsulfosuccinate, AOT, both in aqueous solutions and in nonpolar solvents is investigated. With this in mind, we investigated if the ionic liquid-like (IL-like) surfactant 1-ethyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, emim-AOT, forms direct micelles or vesicles in water. Dynamic light scattering, zeta potential, conductivity, fluorescence spectroscopy, and UV-visible spectroscopy measurements were performed to characterize the organized systems in aqueous solutions. We also studied the self-aggregation of emim-AOT, 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, bmim-AOT, and of 1-hexyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate, hmim-AOT, in nonpolar solvents. The results obtained showed that the IL-like surfactant emim-AOT forms direct micelles in water, as sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) does. However, emim-AOT aggregates are larger, have a lower surface charge, are more stable, and have a more polar and less fluid micellar interface than Na-AOT micelles. It was also observed that emim-AOT and hmim-AOT form reverse micelles in nonpolar solvents. The size of the imidazolium cations dramatically influences the size of the reverse micelles and their ability to solubilize water.

Use of Ionic Liquids-like Surfactants for the Generation of Unilamellar Vesicles with Potential Applications in Biomedicine.

The goal of this work is to understand the influence of the counterion nature on the organized systems formed by 1,4-bis-2-ethylhexylsulfosuccinate surfactants in aqueous solutions and how these aggregates will influence the deoxyribonucleic acid (DNA)-surfactant interactions. With this in mind, two ionic liquid-like surfactants were investigated: 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) and 1-hexyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (hmim-AOT). Measurements of dynamic light scattering, ζ-potential, transmission electron microscopy, and fluorescence and UV-visible spectroscopy were performed to study the characteristics of the vesicles formed by bmim-AOT and hmim-AOT. Regarding the determination of the interaction of the surfactants with DNA, circular dichroism was used. The results obtained showed that bmim-AOT and hmim-AOT ionic liquid-like surfactants spontaneously form unilamellar vesicles in water at very low surfactant concentrations. The characteristics of these aggregates are dependent on the length of the tail of the counterions. The length of the hydrophobic chains of the counterions also influences the DNA-surfactant interactions through hydrophobic effects.

Interfacial properties modulated by the water confinement in reverse micelles created by the ionic liquid-like surfactant bmim-AOT.

The behavior of the interfacial water entrapped in reverse micelles (RMs) that were formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) was investigated with the use of UV-Vis absorption spectroscopy and nuclear magnetic resonance (NMR) relaxometry. The solvatochromism of two molecular probes, namely, 1-methyl-8-oxyquinolinium betaine (QB) and N,N,N',N'-tetramethylethylenediamine copper(ii)acetylacetonate tetraphenylborate ([Cu(acac)(tmen)][B(C6H5)4]), was investigated. As a comparison, the analog RMs formed by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) were also explored. By varying the water content inside the RMs and consequently the different magnitude of the water-surfactant interactions at the interface, interesting properties were observed by comparing bmim-AOT and Na-AOT RMs. From the solvatochromic behavior of ([Cu(acac)(tmen)][B(C6H5)4]), we found that the interface in bmim-AOT RMs shows a smaller electron donating capacity than that in Na-AOT RMs. QB revealed that the interfacial region is a weaker hydrogen bond donor and less polar than the corresponding Na-AOT RMs. NMR experiments showed that the molecular motion of water in bmim-AOT RMs is less restricted than that of the water molecules confined in Na-AOT RMs. In summary, the results show how the nature of the bmim+ cation affects the interaction between the entrapped water and the RM interface, greatly modifying the interfacial water structure in comparison with the results known for Na-AOT.

Catanionic Reverse Micelles as an Optimal Microenvironment To Alter the Water Electron Donor Capacity in a SN2 Reaction.

The effect of interfacial water entrapped in two types of catanionic reverse micelles (RMs) on the kinetic parameters of the SN2 reaction between dimethyl-4-nitrophenylsulfonium trifluoromethanesulfonate (S+) and n-butylamine (BuNH2) was explored. Two catanionic surfactants, composed of a mixture of oppositely charged ionic surfactants without their original counterions, were used to create the RMs. Thus, benzyl- n-hexadecyldimethylammonium 1,4-bis(2-ethylhexyl) sulfosuccinate (BHD-AOT) and cetyltrimethylammonium 1,4-bis(2-ethylhexyl) sulfosuccinate (CTA-AOT) were formed. Also, the well-known anionic surfactant sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (Na-AOT) was employed as a comparison. Our results showed an important catalytic-like effect of all RMs investigated in comparison with a water-benzene mixture, and the rate constant values depend on the type of surfactant used. Faster reaction in BHD-AOT RMs than in CTA-AOT and Na-AOT RMs was observed. This behavior was attributed to the strong interaction (by hydrogen bonding with AOT anion and ion-dipole interaction with BHD+) between the entrapped water and the BHD-AOT interface, which reduces the solvation capacity of water on S+. In CTA-AOT (and Na-AOT) RMs, the water-interface interaction is weaker and the electron pairs of water can solvate S+ ions. In summary, the chemical structure of the counterion on the catanionic surfactant alters the interfacial region, allowing the progress of a reaction inside the RMs to be controlled.

Structural Characterization of Biocompatible Reverse Micelles Using Small-Angle X-ray Scattering, 31P Nuclear Magnetic Resonance, and Fluorescence Spectroscopy.

The most critical problem regarding the use of reverse micelles (RMs) in several fields is the toxicity of their partial components. In this sense, many efforts have been made to characterize nontoxic RM formulations on the basis of biological amphiphiles and/or different oils. In this contribution, the microstructure of biocompatible mixed RMs formulated by sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT) and tri- n-octylphosphine oxide (TOPO) surfactants dispersed in the friendly solvent methyl laurate was studied by using SAXS and 31P NMR and by following the solvatochromic behavior of the molecular probe 4-aminophthalimide (4-AP). The results indicated the presence of RM aggregates upon TOPO incorporation with a droplet size reduction and an increase in the interfacial fluidity in comparison with pure AOT RMs. When confined inside the mixed systems, 4-AP showed a red-edge excitation shift and confirmed the increment of interfacial fluidity upon TOPO addition. Also, the partition between the external nonpolar solvent and the RM interface and an increase in both the local micropolarity and the capability to form a hydrogen bond interaction between 4-AP and a mixed interface were observed. The findings have been explained in terms of the nonionic surfactant structure and its complexing nature expressed at the interfacial level. Notably, we show how two different approaches, i.e., SAXS and the solvatochromism of the probe 4-AP, can be used in a complementary way to enhance our understanding of the interfacial fluidity of RMs, a parameter that is difficult to measure directly.

Micropolarity and Hydrogen-Bond Donor Ability of Environmentally Friendly Anionic Reverse Micelles Explored by UV/Vis Absorption of a Molecular Probe and FTIR Spectroscopy.

In the present work we show how two biocompatible solvents, methyl laurate (ML) and isopropyl myristate (IPM), can be used as a less toxic alternative to replace the nonpolar component in a sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles (RMs) formulation. In this sense, the micropolarity and the hydrogen-bond ability of the interface were monitored through the use of the solvatochromism of a molecular probe (1-methyl-8-oxyquinolinium betaine, QB) and Fourier transform infrared spectroscopy (FTIR). Our results demonstrate that the micropolarity sensed by QB in ML RMs is lower than in IPM RMs. Additionally, the water molecules form stronger H-bond interactions with the polar head of AOT in ML than in IPM. By FTIR was revealed that more water molecules interact with the interface in ML/AOT RMs. On the other hand, for AOT RMs generated in IPM, the weaker water-surfactant interaction allows the water molecules to establish hydrogen bonds with each other trending to bulk water more easily than in ML RMs, a consequence of the dissimilar penetration of nonpolar solvents into the interfacial region. The penetration process is strongly controlled by the polarity and viscosity of the external solvents. All of these results allow us to characterize these biocompatible systems, providing information about interfacial properties and how they can be altered by changing the external solvent. The ability of the nontoxic solvent to penetrate or not into the AOT interface produces a new interface with attractive properties.

Spontaneous catanionic vesicles formed by the interaction between an anionic ß-cyclodextrins derivative and a cationic surfactant.

The present work shows the synthesis of a new type of catanionic surfactant, ModCD14-BHD, which involves an anionic amphiphilic cyclodextrin and the cationic benzyl-n-hexadecyldimethylammonium (BHD). It is obtained from the simple association of the cationic surfactant benzyl-n-hexadecyldimethylammonium chloride (BHDC) and ß-cyclodextrin (ß-CD) monosubstituted with an alkenyl succinate group (Mod-ß-CD14). ModCD14-BHD form unilamellar vesicles spontaneously in water, while the individual components (BHDC and Mod-ß-CD14) do not. The vesicles were character-ized by dynamic light scattering (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and 1H NMR techniques. We suggest that the formation of an inclusion complex between some of the cyclodextrins units and the long hydrocarbon moiety of the cationic surfactant play a crucial role in the vesicles formation. Besides, some or the cavities are available to interact with an external guest. We think that the new surfactant molecule has properties that may lead to important applications in biomedical and pharmaceutical sciences.

Subtleties of catanionic surfactant reverse micelle assemblies revealed by a fluorescent molecular probe.

In this work, the absorption and emission behavior of the cationic hemicyanine trans-4-[4-(dimethylamino)styryl]-N-methylpyridinium iodide (HC) in reverse micelles (RMs) formed by the catanionic surfactants benzyl-n-hexadecyldimethylammonium-1,4-bis-2-ethylhexylsulfosuccinate (AOT-BHD) and cetyltrimethylammonium-1,4-bis-2-ethylhexylsulfosuccinate (AOT-CTA) have been investigated. Our results show that the spectroscopic behavior of HC changes when the dye is dissolved in AOT-BHD or in AOT-CTA RMs. While HC undergoes an intramolecular charge-transfer process upon excitation in AOT-CTA RMs, in AOT-BHD RMs this process is inhibited due to a specific interaction between HC and the polar head group of the BHD+ cation. This implies that the chemical structure of CTA+ and BHD+ cations has a large impact on the excited stated from which HC emission occurs. Additionally, the structural difference between the two cations impacts on the water-RM interface interaction, which provides a way of controlling the solvation process in these RMs. Furthermore, differences in the interfacial fluidity between the two catanionic RMs is observed, a result that is particularly interesting with regard to these systems being used as nanoreactors.

AOT reverse micelles as versatile reaction media for chitosan nanoparticles synthesis.

It is known that Chitosan (Ch) can be used in several applications, such as antimicrobial agent or as drug delivery agent. However, being its water dispersibility very low at physiological pH it is necessary to find a way to improve it. One attractive strategy is to synthesize Chitosan Nanoparticles (Ch-NPs). In this work, a versatile method to obtain Ch-NPs with different and controlled sizes, that were successfully prepared by cross-linking reaction of glutaraldehyde and native chitosan inside of n-heptane/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/water reverse micelles (RMs) is presented. Highly monodisperse NPs were synthesized as confirmed by Dynamic Light Scattering (DLS) and Scanning Electron Microscopy (SEM) techniques. The particle size was dependent on the reactants concentration, cross-linking degree and mainly the amount of water inside of the AOT RMs used as nanoreactors. While the cross-linking is quite difficult to control in bulk water, the reaction inside the RMs is more manageable and efficient.

Nanoscale Control Over Interfacial Properties in Mixed Reverse Micelles Formulated by Using Sodium 1,4-bis-2-ethylhexylsulfosuccinate and Tri-n-octyl Phosphine Oxide Surfactants.

The interfacial properties of pure reverse micelles (RMs) are a consequence of the magnitude and nature of noncovalent interactions between confined water and the surfactant polar head. Addition of a second surfactant to form mixed RMs is expected to influence these interactions and thus affect these properties at the nanoscale level. Herein, pure and mixed RMs stabilized by sodium 1,4-bis-2-ethylhexylsulfosuccinate and tri-n-octyl phosphine oxide (TOPO) surfactants in n-heptane were formulated and studied by varying both the water content and the TOPO mole fraction. The microenvironment generated was sensed by following the solvatochromic behavior of the 1-methyl-8-oxyquinolinium betaine probe and (31) P NMR spectroscopy. The results reveal unique properties of mixed RMs and we give experimental evidence that free water can be detected in the polar core of the mixed RMs at very low water content. We anticipate that these findings will have an impact on the use of such media as nanoreactors for many types of chemical reactions, such as enzymatic reactions and nanoparticle synthesis.

A protic ionic liquid, when entrapped in cationic reverse micelles, can be used as a suitable solvent for a bimolecular nucleophilic substitution reaction.

In this work, we have explored how the confinement of the protic ionic liquid (IL) ethylammonium nitrate (EAN) inside toluene/benzyl-n-hexadecyldimethylammonium chloride (BHDC) reverse micelles (RMs) affects the Cl(-) nucleophilicity on the bimolecular nucleophilic substitution (SN2) reaction between this anion and dimethyl-4-nitrophenylsulfonium trifluoromethanesulfonate. To the best of our knowledge this is the first report where toluene/BHDC RMs use EAN as a polar component and it is used as a nanoreactor for carrying out kinetic experiments. Dynamic light scattering results reveal the formation of RMs containing the protic IL. The kinetic results show that upon confinement, EAN becomes a suitable solvent for the SN2 reaction while in homogeneous media it is a bad option. Entrapped in BHDC RMs, due to the strong hydrogen bond interactions, EAN behaves as an aprotic-like IL which cannot deactivate the nucleophilic power of Cl(-) and yet increases the substrate solubility. These facts show the versatility of this kind of organized system to alter the polar solvent entrapped and its influence on the reaction rate when it is used as a nanoreactor.

Effect of Confinement on the Properties of Sequestered Mixed Polar Solvents: Enzymatic Catalysis in Nonaqueous 1,4-Bis-2-ethylhexylsulfosuccinate Reverse Micelles.

The influence of different glycerol, N,N-dimethylformamide (DMF) and water mixtures encapsulated in 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane reverse micelles (RMs) on the enzymatic hydrolysis of 2-naphthyl acetate by α-chymotrypsin is demonstrated. In the case of the mixtures with DMF and protic solvents it has been previously shown, using absorption, emission and dynamic light-scattering techniques, that solvents are segregated inside the polar core of the RMs. Protic solvents anchor to the AOT, whereas DMF locates to the polar core of the aggregate. Thus, DMF not only helps to solubilize the hydrophobic substrate, increasing its effective concentrations but surprisingly, it does not affect the enzyme activity. The importance of ensuring the presence of RMs, encapsulation of the polar solvents and the corrections by substrate partitioning in order to obtain reliable conclusions is highlighted. Moreover, the effect of a constrained environment on solvent-solvent interactions in homogenous media and its impact on the use of RMs as nanoreactors is stressed.

How the Type of Cosurfactant Impacts Strongly on the Size and Interfacial Composition in Gemini 12-2-12 RMs Explored by DLS, SLS, and FTIR Techniques.

The limited amount of information about reverse micelles (RMs) made with gemini surfactants, the effect of the n-alcohols in their interface, and the water-entrapped structure in the polar core motivated us to perform this work. Thus, in the present contribution, we use dynamic light scattering (DLS), static light scattering (SLS), and FT-IR techniques to obtain information on RMs structure created, with the gemini dimethylene-1,2-bis(dodecyldimethylammonium) bromide (G12-2-12) surfactant and compare the results with its monomer: dodecyltrimethylammonium bromide (DTAB). In this way, the size of the aggregates formed in different nonpolar organic solvents, the effect of the chain length of n-alcohols used as cosurfactants, and the water-entrapped structure were explored. The data show that the structure of the cosurfactant needed to stabilize the RMs plays a fundamental role, affecting the size and behavior of the aggregates. In contrast to what happens with the RMs formed with the monomer DTAB, water entrapped inside G12-2-12 RMs displays different interaction with the interface depending on the hydrocarbon chain length of the n-alcohol used as cosurfactant. Thus, n-pentanol and n-octanol molecules are located in different regions in the RMs interfaces formed with the gemini surfactant. n-Octanol locates at the RMs interface among the surfactant hydrocarbon tails increasing the water-surfactant polar headgroup interaction. On the other hand, n-pentanol locates at the RMs interface near the polar core, limiting the interaction of water with the micellar inner interface and favoring the water-water interaction in the polar core.

How the cation 1-butyl-3-methylimidazolium impacts the interaction between the entrapped water and the reverse micelle interface created with an ionic liquid-like surfactant.

The behavior of the interfacial water entrapped in reverse micelles (RMs) formed by the ionic liquid-like surfactant 1-butyl-3-methylimidazolium 1,4-bis-2-ethylhexylsulfosuccinate (bmim-AOT) dissolved in benzene (or chlorobenzene) was investigated using noninvasive techniques such as dynamic light scattering (DLS), static light scattering (SLS), FT-IR and (1)H NMR. The DLS and SLS results reveal the formation of discrete spherical and non-interacting water droplets stabilized by the bmim-AOT surfactant. Moreover, since the droplet size increases as the W0 (W0 = [water]/[surfactant]) value increases, water interacts with the RM interface. From FT-IR and (1)H NMR data, a weaker water-surfactant interaction in bmim-AOT RMs in comparison with the RMs created by sodium 1,4-bis-2-ethylhexylsulfosuccinate (Na-AOT) is detected. Consequently, there are less water molecules interacting with the interface in bmim-AOT RMs, and their hydrogen bond network is not completely disrupted as they are in Na-AOT RMs. The results show how the nature of the new cation impacts the interaction between the entrapped water and the RM interface, modifying the interfacial water structure in comparison with the results known for Na-AOT.

Singularities in the physicochemical properties of spontaneous AOT-BHD unilamellar vesicles in comparison with DOPC vesicles.

In the present work, we study different physicochemical properties of the spontaneous unilamellar vesicles created by the catanionic ionic liquid-like surfactant benzyl-n-hexadecyldimethylammonium 1,4-bis-2-ethylhexylsulfosuccinate (AOT-BHD), using two different fluorescent probes: 6-propionyl-2-(dimethylaminonaphthalene), PRODAN and trans-4-[4-(dimethylamino)-styryl]-1-methylpyridinium iodide, HC. Steady-state and time resolved fluorescence emission spectroscopy allowed us to find the unique properties of the AOT-BHD bilayer in comparison with vesicles formed using the traditional phospholipid 1,2-di-oleoyl-sn-glycero-3-phosphatidylcholine, DOPC. From the emission results, we observed that the region of the bilayer close to the polar head of AOT-BHD is a powerful electron donor environment, even larger than DOPC. Additionally, the AOT-BHD bilayer offers a less polar and slightly more viscous zone than DOPC. Thus, this particular bilayer is able to produce large incorporation of ionic and nonionic molecules and is very promising to be used as a nanocarrier in pharmacological, cosmetic and food fields.