Strategies for safe management of hospital wastewater during the COVID-19 pandemic.

Management of hospital wastewater is a challenging task, particularly during the situations like coronavirus 2019 (COVID-19) pandemic. The hospital effluent streams are likely to contain many known and unknown contaminants including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) along with a variety of pollutants arising from pharmaceuticals, life-style chemicals, drugs, radioactive species, and human excreta from the patients. The effluents are a mixed bag of contaminants with some of them capable of infecting through contact. Hence, it is essential to identify appropriate treatment strategies for hospital waste streams. In this work, various pollutants emerging in the context of COVID-19 are examined. A methodical review is conducted on the occurrence and disinfection methods of SARS-CoV-2 in wastewater. An emphasis is given to the necessity of addressing the challenges of handling hospital effluents dynamically involved during the pandemic scenario to ensure human and environmental safety. A comparative evaluation of disinfection strategies makes it evident that the non-contact methods like ultraviolet irradiation, hydrogen peroxide vapor, and preventive approaches such as the usage of antimicrobial surface coating offer promise in reducing the chance of disease transmission. These methods are also highly efficient in comparison with other strategies. Chemical disinfection strategies such as chlorination may lead to further disinfection byproducts, complicating the treatment processes. An overall analysis of various disinfection methods is presented here, including developing methods such as membrane technologies, highlighting the merits and demerits of each of these processes. Finally, the wastewater surveillance adopted during the COVID-19 outbreak is discussed. Supplementary Information: The online version contains supplementary material available at 10.1007/s13762-023-04803-1.

Various advanced wastewater treatment methods to remove microplastics and prevent transmission of SARS-CoV-2 to airborne microplastics.

Microplastics (MPs) and SARS-CoV-2 interact due to their widespread presence in our environment and affect the virus' behaviour indoors and outdoors. Therefore, it is necessary to study the interaction between MPs and SARS-CoV-2. The environmental damage caused by MPs is increasing globally. Emerging pollutants may adversely affect organisms, especially sewage, posing a threat to human health, animal health, and the ecological system. A significant concern with MPs in the air is that they are a vital component of MPs in the other environmental compartments, such as water and soil, which may affect human health through ingesting or inhaling. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membrane bioreactors, advanced oxidation processes, adsorption, etc., are highly effective in removing MPs; they can still serve as an entrance route due to their constantly being discharged into aquatic environments. Following that, an analysis of each process for MPs' removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, an airborne microplastic has been reported in urban areas, raising health concerns since aerosols are considered a possible route of SARS-CoV-2 disease transmission and bind to airborne MP surfaces. The MPs can be removed from wastewater through conventional treatment processes with physical processes such as screening, grit chambers, and pre-sedimentation.

A macroscopic object passively cooled into its quantum ground state of motion beyond single-mode cooling.

The nature of the quantum-to-classical crossover remains one of the most challenging open question of Science to date. In this respect, moving objects play a specific role. Pioneering experiments over the last few years have begun exploring quantum behaviour of micron-sized mechanical systems, either by passively cooling single GHz modes, or by adapting laser cooling techniques developed in atomic physics to cool specific low-frequency modes far below the temperature of their surroundings. Here instead we describe a very different approach, passive cooling of a whole micromechanical system down to 500 µK, reducing the average number of quanta in the fundamental vibrational mode at 15 MHz to just 0.3 (with even lower values expected for higher harmonics); the challenge being to be still able to detect the motion without disturbing the system noticeably. With such an approach higher harmonics and the surrounding environment are also cooled, leading to potentially much longer mechanical coherence times, and enabling experiments questioning mechanical wave-function collapse, potentially from the gravitational background, and quantum thermodynamics. Beyond the average behaviour, here we also report on the fluctuations of the fundamental vibrational mode of the device in-equilibrium with the cryostat. These reveal a surprisingly complex interplay with the local environment and allow characteristics of two distinct thermodynamic baths to be probed.

Novel adsorptive PVC nanofibrous/thiol-functionalized TNT composite UF membranes for effective dynamic removal of heavy metal ions.

The development of efficient strategies for the removal of heavy metal ions from aqueous solutions is rapidly demanded as these contaminants are very toxic and carcinogenic and show detrimental effects on the living creatures. The main focus of the current study is on the preparation and assessment of electrospun adsorptive nanofiber membranes for the removal of toxic Ni(II) and Cu(II) from wastewater in the ultrafiltration process. Hydrothermally synthesized titanate nanotubes (TNT) was modified with thiol functional groups and then directly incorporated to the polyvinyl chloride nanofiber matrices via electrospinning process to fabricate an adsorptive membrane. The as-prepared electrospun nanofiber membranes and the nanoadsorbents were characterized with respect to the physiochemical properties, surface structure and morphology, applying XPS, FTIR, FESEM, EDX and TEM analysis and then, the membranes were evaluated in terms of the removal of the heavy metal ions in a continuous ultrafiltration mode. In adsorptive filtration of the metal ions, the effective factors including nanoadsorbents loading (0.5-1.5 wt%), initial metal ion concentration (60-150 mg/L), feed temperature (~25 °C-45 °C), presence of competing ion and reusability were investigated in the UF system where the membranes containing 1.5 wt% thiol-modified TNT and virgin TNT adsorbents demonstrated excellent removal efficiency compared to the other membranes. The Cu(II) and Ni(II) removal efficiency of the membrane containing 1.5 wt% functionalized TNT was 90% and 86.7%, respectively which was the highest ones. As was expected and due to the uniform dispersion and less aggregation of the modified TNT adsorbents on the large surface area of the electrospun nanofibers, more adsorption capacity of the nanoparticles can be exploited. Moreover, the strong affinity of the thiol functional groups toward the metal cations, these membranes removed metal contaminants more efficiently. Besides, the Cu(II) removal efficiency of the fabricated membranes didn't show any drastic changes in the presence of the competing ions. Furthermore, acceptable performance was achieved for the prepared membranes even after four adsorption/regeneration cycles in the continuous UF experiments, demonstrating the feasibility and effectiveness of the prepared adsorptive nanofiber membranes for the removal of heavy metal ions.

Micro/nano-machines for spilled-oil cleanup and recovery: A review.

High-efficiency, safe and economically viable nano-engineered platforms for oil spill cleanup and recovery are of great importance. This review takes account of the concept of nanomotors and micromotors and their most advancements in use for oil spill treatment. The fundamental facets of artificial micro- and nano-machines/nanobots/nanomotors (MNMs) are first documented, followed by the most recent influencing developments in chemical engineering approaches toward their specific utilizations. The surface chemistry of these MNMs, their behaviors in different water matrices and their roles in the removal of oil are examined, revealing great rooms for improvement. The strategies for surface and structural modification of these tiny machines toward enhancing their reactivity in the removal of oil and coupled tasking are discussed in details, highlighting the significance of fit-for-duty design and tailored fabrication. The engineering limitations and practical implementation barriers of this emerging technology and how it can be overcome are also considered. Finally, some engineering boundaries and perspectives of this fast-evolving field are proposed at the end.

A novel genomic region on chromosome 11 associated with fearfulness in dogs.

The complex phenotypic and genetic nature of anxieties hampers progress in unravelling their molecular etiologies. Dogs present extensive natural variation in fear and anxiety behaviour and could advance the understanding of the molecular background of behaviour due to their unique breeding history and genetic architecture. As dogs live as part of human families under constant care and monitoring, information from their behaviour and experiences are easily available. Here we have studied the genetic background of fearfulness in the Great Dane breed. Dogs were scored and categorised into cases and controls based on the results of the validated owner-completed behavioural survey. A genome-wide association study in a cohort of 124 dogs with and without socialisation as a covariate revealed a genome-wide significant locus on chromosome 11. Whole exome sequencing and whole genome sequencing revealed extensive regions of opposite homozygosity in the same locus on chromosome 11 between the cases and controls with interesting neuronal candidate genes such as MAPK9/JNK2, a known hippocampal regulator of anxiety. Further characterisation of the identified locus will pave the way for molecular understanding of fear in dogs and may provide a natural animal model for human anxieties.

Quantitative response in ion mobility spectrometry with atmospheric pressure chemical ionization in positive polarity as a function of moisture and temperature.

Response of an ion mobility spectrometer at ambient pressure was quantitatively determined for fourteen chemicals from five chemical families spanning a range of proton affinities and temperature from 30 to 175 °C with moisture from 1 to 1 × 104 ppmv in purified air. Peak intensities, drift times and reduced mobility coefficients were determined for hydrated protons from a63Ni ion source and for protonated monomers and proton bound dimers of alcohols, aldehydes, acetates, ketones, and organophosphates. These measurements permitted the determination of response factors with atmospheric pressure chemical ionization and the influence of moisture and temperature on APCI response with correlation to computational models of hydration values. The formation of protonated monomers and proton bound dimers was described by heats of formation for a displacement reaction of water on H+(H2O)n by an analyte vapor and favorably matched results from density functional theory (DFT) with the 6-311 + G(dp) basis set. Response factors worsened with increased moisture and decreased temperature for compounds of medium, and more so, of low proton affinities. Findings here provide a broad measure and understanding for quantitative response in ion mobility spectrometers for substances for combinations of moisture and temperature.

Unusual behavior of MgFe2O4 during regeneration: desorption versus specific adsorption.

The reusability of spent adsorbents is the most important characteristic for their practical application. The process of MgFe2O4 regeneration after methylene blue (MB) adsorption was studied. The effect of the nature (HCl, HNO3, and MgCl2) and the concentration (10-3-10-1 M) of regeneration agents was established. All the regeneration agents at 10-3 and 10-2 M had high efficiency and adsorption capacity recovery reached 80-90%, whereas for 10-1 M concentration the adsorption efficiency was in the range of 4.5-36.2%. It was shown that the concentration of desorbed MB was much less than what had been previously adsorbed and did not correlate with regeneration efficiency. The unusual behavior of MgFe2O4 during regeneration could be due to different mechanisms of regeneration by OH3 + and Mg2+ ions: (i) for acidic regeneration the main process was the non-specific adsorption of OH3 + ions in a diffusion layer and the substitution of adsorbed MB due to electrostatic forces; (ii) in the case of Mg2+ as a regeneration agent, there was specific adsorption due to the completion of a crystal lattice of MgFe2O4 nanoparticles by Mg2+ ions (according to the rules of Fayans-Pannet) with the formation of new Mg-OH adsorption sites and the super-equivalent adsorption of Mg2+ ions (according to DLVO (Derjaguin, Landau, Verwey, and Overbeek) theory) accompanied by a recharge of the MgFe2O4 surface. These phenomena of MgFe2O4 regeneration using Mg2+ ions must be taken into account in the theory and practice of adsorption.

Differential Mobility Spectrometry of Ketones in Air at Extreme Levels of Moisture.

The performance of a differential mobility spectrometer was characterized at ambient pressure and ten values of water vapor concentration, from 1.0 × 102 to 1.7 × 104 ppm using a homologous series of seven ketones from acetone to 2-dodecanone. Dispersion plots at 30 °C with separation fields from 35 to 123 Td exhibited increased alpha functions for the hydrated proton, protonated monomers, and proton bound dimers with increased moisture levels. Increases in the level of moisture were accompanied by decreased quantitative response with progressive suppression in the formation of the proton bound dimer first and then protonated monomer. Product ions for 2-octanone at 7 ppb were not observed above a moisture level of 4.0 × 103 ppm, establishing a limit for observation of analyte ion formation. The observation limit increased from 1.1 × 103 ppm for acetone to 5.7 × 103 ppm for 2-dodecanone. These findings demonstrate that ketones can be determined with a differential mobility spectrometry (DMS) analyzer near room temperature in the presence of elevated levels of moisture expected with the use of membrane inlets or headspace sampling of surface or ground waters. Moisture levels entering this DMS analyzer employed as an environmental monitor should be kept at 1.0 × 103 ppm or below and quantitative studies for individual ketones should be made at a fixed moisture level.

Nanochitin/manganese oxide-biodegradable hybrid sorbent for heavy metal ions.

The article presents the results of the synthesis and research of a new biodegradable hybrid nanosized polymer-inorganic system possessing the double nature of heavy metal ions extraction from solutions. Firstly, the sorption of metal ions takes place by the ion-exchange properties of porous manganese oxide and, secondly, due to specific interaction and chelating with functional groups of polysaccharides in terms of nanochitin (ChNC). The synthesis is based on the colloid-chemical processes of interaction between polysaccharide and manganese oxide nanosized particles. Using the mathematical model of the Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory, it has been shown that this interaction occurs due to the formation of hydrogen bonds and electrostatic interactions of oppositely charged particles. Hybrid sorbents were characterised by X-ray diffraction, Fourier transform infrared spectroscopy, Transmission electron and Atomic force microscopy. The highest value of sorption capacity for hybrid materials was obtained for Ni2+ extraction and reached 114.0 ± 1.1 mg/g. It was shown that biodegradation of hybrid sorbents increases with the concentration of manganese oxide nanoparticles and almost complete degradation of the organic part can be performed within 6 days. The obtained biodegradable sorbents were designed to address ecological problems connected with the pollution of natural waters by toxic metallic ions.

Two novel genomic regions associated with fearfulness in dogs overlap human neuropsychiatric loci.

Anxiety disorders are among the leading health issues in human medicine. The complex phenotypic and allelic nature of these traits as well as the challenge of establishing reliable measures of the heritable component of behaviour from the associated environmental factors hampers progress in their molecular aetiology. Dogs exhibit large natural variation in fearful and anxious behaviour and could facilitate progress in the molecular aetiology due to their unique genetic architecture. We have performed a genome-wide association study with a canine high-density SNP array in a cohort of 330 German Shepherds for two phenotypes, fear of loud noises (noise sensitivity) and fear of strangers or in novel situations. Genome-widely significant loci were discovered for the traits on chromosomes 20 and 7, respectively. The regions overlap human neuropsychiatric loci, including 18p11.2, with physiologically relevant candidate genes that contribute to glutamatergic and dopaminergic neurotransmission in the brain. In addition, the noise-sensitivity locus includes hearing-related candidate genes. These results indicate a genetic contribution for canine fear and suggest a shared molecular aetiology of anxiety across species. Further characterisation of the identified loci will pave the way to molecular understanding of the conditions as a prerequisite for improved therapy.

Stabilized entanglement of massive mechanical oscillators.

Quantum entanglement is a phenomenon whereby systems cannot be described independently of each other, even though they may be separated by an arbitrarily large distance 1 . Entanglement has a solid theoretical and experimental foundation and is the key resource behind many emerging quantum technologies, including quantum computation, cryptography and metrology. Entanglement has been demonstrated for microscopic-scale systems, such as those involving photons2-5, ions 6 and electron spins 7 , and more recently in microwave and electromechanical devices8-10. For macroscopic-scale objects8-14, however, it is very vulnerable to environmental disturbances, and the creation and verification of entanglement of the centre-of-mass motion of macroscopic-scale objects remains an outstanding goal. Here we report such an experimental demonstration, with the moving bodies being two massive micromechanical oscillators, each composed of about 10 12 atoms, coupled to a microwave-frequency electromagnetic cavity that is used to create and stabilize the entanglement of their centre-of-mass motion15-17. We infer the existence of entanglement in the steady state by combining measurements of correlated mechanical fluctuations with an analysis of the microwaves emitted from the cavity. Our work qualitatively extends the range of entangled physical systems and has implications for quantum information processing, precision measurements and tests of the limits of quantum mechanics.

Revealing Hidden Quantum Correlations in an Electromechanical Measurement.

Under a strong quantum measurement, the motion of an oscillator is disturbed by the measurement backaction, as required by the Heisenberg uncertainty principle. When a mechanical oscillator is continuously monitored via an electromagnetic cavity, as in a cavity optomechanical measurement, the backaction is manifest by the shot noise of incoming photons that becomes imprinted onto the motion of the oscillator. Following the photons leaving the cavity, the correlations appear as squeezing of quantum noise in the emitted field. Here we observe such "ponderomotive" squeezing in the microwave domain using an electromechanical device made out of a superconducting resonator and a drumhead mechanical oscillator. Under a strong measurement, the emitted field develops complex-valued quantum correlations, which in general are not completely accessible by standard homodyne measurements. We recover these hidden correlations, using a phase-sensitive measurement scheme employing two local oscillators. The utilization of hidden correlations presents a step forward in the detection of weak forces, as it allows us to fully utilize the quantum noise reduction under the conditions of strong force sensitivity.

Noiseless Quantum Measurement and Squeezing of Microwave Fields Utilizing Mechanical Vibrations.

A process which strongly amplifies both quadrature amplitudes of an oscillatory signal necessarily adds noise. Alternatively, if the information in one quadrature is lost in phase-sensitive amplification, it is possible to completely reconstruct the other quadrature. Here we demonstrate such a nearly perfect phase-sensitive measurement using a cavity optomechanical scheme, characterized by an extremely small noise less than 0.2 quanta. The device also strongly squeezes microwave radiation by 8 dB below vacuum. A source of bright squeezed microwaves opens up applications in manipulations of quantum systems, and noiseless amplification can be used even at modest cryogenic temperatures.

Kinetic and thermodynamic studies of the Co(II) and Ni(II) ions removal from aqueous solutions by Ca-Mg phosphates.

The aim of this work was to study the sorption kinetics and thermodynamics of Co(II) and Ni(II) from aqueous solutions by sorbents on the basis of hydrogen (PD-1) and tertiary (PD-2) Ca-Mg phosphates depending on the solution temperature and sorbents chemical composition. Kinetic studies of adsorption of Co(II) and Ni(II) ions onto samples of phosphate sorbents were performed in batch experiment at the temperatures 288, 303, 318 and 333 K. The sorbent dose was fixed at 10 g L-1, initial pH value 2.6, and contact time varied from 5 to 600 min. The kinetics of Co(II) and Ni(II) adsorption were analyzed by using pseudo-first order, pseudo-second order and intraparticle diffusion models. Thermodynamic parameters (ΔG°, ΔH° and ΔS°) for the sorption of Co(II) and Ni(II) were determined using the Gibbs-Helmholtz equation. The calculated kinetic parameters and corresponding correlation coefficients revealed that Co(II) and Ni(II) uptake process followed the pseudo-second order rate expression. Thermodynamic studies confirmed the spontaneous and endothermic nature of removal process which indicate that sorption of Co(II) and Ni(II) ions onto both phosphate sorbents is favoured at higher temperatures and has the chemisorptive mechanism. The data thus obtained would be useful for practical application of the low cost and highly effective Ca-Mg phosphate sorbents.

Long-term outcome of medically treated epilepsy.

PURPOSE: To review the long-term outcome of epilepsy in population-based studies. METHOD: Analysis of population-based studies. RESULTS: About two of three patients with new-onset epilepsy will, in the long run, enter five-year terminal remission. Chances for remission are best for those with idiopathic or cryptogenic epilepsy. It is unclear whether the seizure outcome has improved over the last several decades. Social outcome, however, may have become better because of the improved level of knowledge on and public attitudes toward people with epilepsy, and possibly fewer prejudices at home, daycare, school, military and labor market. CONCLUSION: While we still do not have a cure for epilepsy for all patients, relief of the medical and social consequences is available for many and hope is on the horizon for people with epilepsy.

Genetic heterogeneity underlying variation in a locally adaptive clinal trait in Pinus sylvestris revealed by a Bayesian multipopulation analysis.

Local adaptation is a common feature of plant and animal populations. Adaptive phenotypic traits are genetically differentiated along environmental gradients, but the genetic basis of such adaptation is still poorly known. Genetic association studies of local adaptation combine data over populations. Correcting for population structure in these studies can be problematic since both selection and neutral demographic events can create similar allele frequency differences between populations. Correcting for demography with traditional methods may lead to eliminating some true associations. We developed a new Bayesian approach for identifying the loci underlying an adaptive trait in a multipopulation situation in the presence of possible double confounding due to population stratification and adaptation. With this method we studied the genetic basis of timing of bud set, a surrogate trait for timing of yearly growth cessation that confers local adaptation to the populations of Scots pine (Pinus sylvestris). Population means of timing of bud set were highly correlated with latitude. Most effects at individual loci were small. Interestingly, we found genetic heterogeneity (that is, different sets of loci associated with the trait) between the northern and central European parts of the cline. We also found indications of stronger stabilizing selection toward the northern part of the range. The harsh northern conditions may impose greater selective pressure on timing of growth cessation, and the relative importance of different environmental cues used for tracking the seasons might differ depending on latitude of origin.

Quantum Backaction Evading Measurement of Collective Mechanical Modes.

The standard quantum limit constrains the precision of an oscillator position measurement. It arises from a balance between the imprecision and the quantum backaction of the measurement. However, a measurement of only a single quadrature of the oscillator can evade the backaction and be made with arbitrary precision. Here we demonstrate quantum backaction evading measurements of a collective quadrature of two mechanical oscillators, both coupled to a common microwave cavity. The work allows for quantum state tomography of two mechanical oscillators, and provides a foundation for macroscopic mechanical entanglement and force sensing beyond conventional quantum limits.

Stability of 5,5-dimethyl-1-pyrroline-N-oxide as a spin-trap for quantification of hydroxyl radicals in processes based on Fenton reaction.

Fenton reaction was used to produce hydroxyl radicals under conditions similar to AOPs with 5,5-dimethyl-1-pyrroline-N-oxide (DMPO) as a spin trap agent in electron paramagnetic resonance (EPR) analysis. A theoretical kinetics model was developed to determine conditions under which the spin-adduct DMPO-OH is not further oxidized by Fe(3+) and excessive radicals, so that hydroxyl radicals concentration could be accurately inferred. Experiments were designed based upon the model and H2O2 and Fe(2+) concentrations were varied from 1 to 100 mM and from 0.1 to 10 mM, respectively, with a constant H2O2: Fe(2+) ratio of 10:1. Results confirmed that DMPO concentration should be at least 20 times higher than the concentration of H2O2 and 200 times higher than iron concentration to produce stable DMPO-OH EPR signal. When DMPO: H2O2 ratio varied from 1 to 10, DMPO-OH could generate intermediates and be further oxidized leading to the apparition of an additional triplet. This signal was attributed to a paramagnetic dimer: its structure and a formation mechanism were proposed. Finally, the utilization of sodium sulfite and catalase to terminate Fenton reaction was discussed. Catalase appeared to be compatible with DMPO. However, sodium sulfite should be avoided since it reacted with DMPO-OH to form DMPO-SO3.

Squeezing of Quantum Noise of Motion in a Micromechanical Resonator.

A pair of conjugate observables, such as the quadrature amplitudes of harmonic motion, have fundamental fluctuations that are bound by the Heisenberg uncertainty relation. However, in a squeezed quantum state, fluctuations of a quantity can be reduced below the standard quantum limit, at the cost of increased fluctuations of the conjugate variable. Here we prepare a nearly macroscopic moving body, realized as a micromechanical resonator, in a squeezed quantum state. We obtain squeezing of one quadrature amplitude 1.1±0.4 dB below the standard quantum limit, thus achieving a long-standing goal of obtaining motional squeezing in a macroscopic object.