ABSTRACT
Typical porous silica (SBA-15) has been modified with pore expander agent (1,3,5-trimethylbenzene) and fluoride-species to diminish the length of the channels to obtain materials with different textural properties, varying the Si/Zr molar ratio between 20 and 5. These porous materials were characterized by X-ray Diffraction (XRD), N2 adsorption/desorption isotherms at -196 °C and X-ray Photoelectron Spectroscopy (XPS), obtaining adsorbent with a surface area between 420-337 m2 g-1 and an average pore diameter with a maximum between 20-25 nm. These materials were studied in the adsorption of human blood serum proteins (human serum albumin-HSA and immunoglobulin G-IgG). Generally, the incorporation of small proportions was favorable for proteins adsorption. The adsorption data revealed that the maximum adsorption capacity was reached close to the pI. The batch purification experiments in binary human serum solutions showed that Si sample has considerable adsorption for IgG while HSA adsorption is relatively low, so it is possible its separation.
Subject(s)
Serum Albumin/chemistry , Serum Globulins/chemistry , Silicon Dioxide/chemistry , Adsorption , Humans , PorosityABSTRACT
The adsorption of human immunoglobulin G (IgG) and human serum albumin (HSA) on a non-calcined Mg-Al layered double hydroxide (3:1 Mg-Al LDH) was studied in batch and fixed bed experiments, focusing on the effect of buffer solution and pH over sorbent uptake. Mg-Al LDH was synthesized and characterized by X-ray diffraction (XRD), N2 adsorption-desorption isotherms at -196°C, X-ray photoelectron spectroscopy (XPS), Zero point charge (pHzpc), particle size distribution and Fourier transform infra-red (FTIR). Batch adsorption experiments were performed in order to investigate the effects of pH on IgG and HSA adsorption with different buffers: sodium acetate (ACETATE), sodium phosphate (PHOSPHATE), 3-(N-morpholino) propanesulfonic acid (MOPS), 4-(2-Hydroxyethyl)piperazine-1-ethanesulfonic acid (HEPES) and trizma-hydrochloric acid (TRIS-HCl). Maximum adsorption capacities estimated by the Langmuir model were 239mgg-1 for IgG and 105mgg-1 for HSA in TRIS-HCl buffer. On the other hand, the highest selectivity for IgG adsorption over HSA was obtained with buffer PHOSPHATE (pH 6.5). The maximum IgG and HSA adsorption uptake in this case were 165 and 36mgg-1, respectively. Fixed bed experiments were carried out with both proteins using PHOSPHATE buffer (pH 6.5), which confirmed that IgG was more selectively adsorbed than HSA on Mg-Al LDH and both could be fully recovered by elution with sodium chloride (NaCl).