Single-Atoms on Crystalline Carbon Nitrides for Selective C─H Photooxidation: A Bridge to Achieve Homogeneous Pathways in Heterogeneous Materials.

Single-atom catalysis is a field of paramount importance in contemporary science due to its exceptional ability to combine the domains of homogeneous and heterogeneous catalysis. Iron and manganese metalloenzymes are known to be effective in C─H oxidation reactions in nature, inspiring scientists to mimic their active sites in artificial catalytic systems. Herein, a simple and versatile cation exchange method is successfully employed to stabilize low-cost iron and manganese single-atoms in poly(heptazine imides) (PHI). The resulting materials are employed as photocatalysts for toluene oxidation, demonstrating remarkable selectivity toward benzaldehyde. The protocol is then extended to the selective oxidation of different substrates, including (substituted) alkylaromatics, benzyl alcohols, and sulfides. Detailed mechanistic investigations revealed that iron- and manganese-containing photocatalysts work through a similar mechanism via the formation of high-valent M═O species. Operando X-ray absorption spectroscopy (XAS) is employed to confirm the formation of high-valent iron- and manganese-oxo species, typically found in metalloenzymes involved in highly selective C─H oxidations.

Carbon nitride based materials: more than just a support for single-atom catalysis.

Recently, the missing link between homogeneous and heterogeneous catalysis has been found and it was named single-atom catalysis (SAC). However, the SAC field still faces important challenges, one of which is controlling the bonding/coordination between the single atoms and the support in order to compensate for the increase in surface energy when the particle size is reduced due to atomic dispersion. Excellent candidates to meet this requirement are carbon nitride (CN)-based materials. Metal atoms can be firmly trapped in nitrogen-rich coordination sites in CN materials, which makes them a unique class of hosts for preparing single-atom catalysts (SACs). As one of the most promising two-dimensional supports to stabilize isolated metal atoms, CN materials have been increasingly employed for preparing SACs. Herein, we will cover the most recent advances in single-atoms supported by CN materials. In this review, the most important characterization techniques and the challenges faced in this topic will be discussed, and the commonly employed synthetic methods will be delineated for different CN materials. Finally, the catalytic performance of SACs based on carbon nitrides will be reviewed with a special focus on their photocatalytic applications. In particular, we will prove CN as a non-innocent support. The relationship between single-atoms and carbon nitride supports is two-way, where the single-atoms can change the electronic properties of the CN support, while the electronic features of the CN matrix can tune the catalytic activity of the single sites in photocatalytic reactions. Finally, we highlight the frontiers in the field, including analytical method development, truly controlled synthetic methods, allowing the fine control of loading and multi-element synthesis, and how understanding the two-way exchange behind single-atoms and CN supports can push this topic to the next level.

Selective methane photooxidation into methanol under mild conditions promoted by highly dispersed Cu atoms on crystalline carbon nitrides.

Here we report a photocatalytic system based on crystalline carbon nitrides (PHI) and highly dispersed transition metals (Fe, Co and Cu) for controlled methane photooxidation to methanol under mild conditions. The Cu-PHI catalyst showed a remarkable methanol production (2900 µmol g-1) in 4 hours, with a turnover number of 51 moles of oxygenated liquid product per mole of Cu. To date, this result is the highest value for methane oxidation under mild conditions (1 bar, 25 °C).

Graphitic carbon nitrides as platforms for single-atom photocatalysis.

Herein we demonstrate that adding single atoms of selected transition metals to graphitic carbon nitrides allows the tailoring of the electronic and chemical properties of these 2D nanomaterials, directly impacting their usage in photocatalysis. These single-atom photocatalysts were successfully prepared with Ni2+, Pt2+ or Ru3+ by cation exchange, using poly(heptazine imides) (PHI) as the 2D layered platform. Differences in photocatalytic performance for these metals were assessed using rhodamine-B (RhB) and methyl orange (MO) as model compounds for degradation. We have demonstrated that single atoms may either improve or impair the degradation of RhB and MO, depending on the proper matching of the net charge of these molecules and the surface potential of the catalyst, which in turn is responsive to the metal incorporated into the PHI nanostructures. Computer simulations demonstrated that even one transition metal cation caused dramatic changes in the electronic structure of PHI, especially regarding light absorption, which was extended all along the visible up to the near IR region. Besides introducing new quantum states, the metal atoms strongly polarized the molecular orbitals across the PHI and electrostatic fields arising from the electronic transitions became at least tenfold stronger. This simple proof of concept demonstrates that these new materials hold promise as tools for many important photocatalytic reactions that are strongly dependent on our ability to control surface charge and its polarization under illumination, such as H2 evolution, CO2 reduction and photooxidation in general.

Environmental impact of industrial sludge stabilization/solidification products: chemical or ecotoxicological hazard evaluation?

Nowadays, the classification of industrial solid wastes is not based on risk analysis, thus the aim of this study was to compare the toxicity classifications based on the chemical and ecotoxicological characterization of four industrial sludges submitted to a two-step stabilization/solidification (S/S) processes. To classify S/S products as hazardous or non-hazardous, values cited in Brazilian chemical waste regulations were adopted and compared to the results obtained with a battery of biotests (bacteria, alga and daphnids) which were carried out with soluble and leaching fractions. In some cases the hazardous potential of industrial sludge was underestimated, since the S/S products obtained from the metal-mechanics and automotive sludges were chemically classified as non-hazardous (but non-inert) when the ecotoxicity tests showed toxicity values for leaching and soluble fractions. In other cases, the environmental impact was overestimated, since the S/S products of the textile sludges were chemically classified as non-inert (but non-hazardous) while ecotoxicity tests did not reveal any effects on bacteria, daphnids and algae. From the results of the chemical and ecotoxicological analyses we concluded that: (i) current regulations related to solid waste classification based on leachability and solubility tests do not ensure reliable results with respect to environmental protection; (ii) the two-step process was very effective in terms of metal immobilization, even at higher metal-concentrations. Considering that S/S products will be subject to environmental conditions, it is of great interest to test the ecotoxicity potential of the contaminants release from these products with a view to avoiding environmental impact given the unreliability of ecotoxicological estimations originating from chemical analysis.

Small hazardous waste generators in developing countries: use of stabilization/solidification process as an economic tool for metal wastewater treatment and appropriate sludge disposal.

The aim of this study was to propose a profitable destination for an industrial sludge that can cover the wastewater treatment costs of small waste generators. Optimized stabilization/solidification technology was used to treat hazardous waste from an electroplating industry that is currently released untreated to the environment. The stabilized/solidified (S/S) waste product was used as a raw material to build concrete blocks, to be sold as pavement blocks or used in roadbeds and/or parking lots. The quality of the blocks containing a mixture of cement, lime, clay and waste was evaluated by means of leaching and solubility tests according to the current Brazilian waste regulations. Results showed very low metal leachability and solubility of the block constituents, indicating a low environmental impact. Concerning economic benefits from the S/S process and reuse of the resultant product, the cost of untreated heavy metal-containing sludge disposal to landfill is usually on the order of US$ 150-200 per tonne of waste, while 1tonne of concrete roadbed blocks (with 25% of S/S waste constitution) has a value of around US$ 100. The results of this work showed that the cement, clay and lime-based process of stabilization/solidification of hazardous waste sludge is sufficiently effective and economically viable to stimulate the treatment of wastewater from small industrial waste generators.