ABSTRACT
AIM: To evaluate several factors that might interfere with the use of electronic root canal length measurement devices (ERCLMDs) in a laboratory setting, including two different embedding media (alginate and electroconductive gel), three different types of devices and the radiographic view on the assessment of the electronic readings. METHODOLOGY: Thirty single-rooted extracted human mandibular premolars were selected. After access and canal pre-flaring, a size 10 K-file was inserted in the canal up to the major apical foramen under magnification (×10), and this length was recorded as the actual length (AL) of the canal. Teeth were mounted on a specific endodontic training kit platform (ProTrain). Two different embedding media (electroconductive gel and alginate) and three different ERCLMDs: Apex ID (SybronEndo, Glendora, CA, USA), CanalPro Apex Locator (Coltene-Endo, Cuyahoga Falls, OH, USA) and the Root ZX II (J. Morita, Tokyo, Japan), were tested. Following the measurement at the 0.5 mark of each ERCLMD using alginate, two periapical radiographs (bucco-lingual and proximal views) were taken. The difference between the electronic readings and the AL, as well as the distance from the file tip to the apex of the roots on the radiographs, was calculated. Data were analysed statistically (two-way anova, Tukey's and chi-squared tests) at 5% significance level. RESULTS: The incidence of over-extended readings was significantly greater (P < 0.05) when using the ProTrain electroconductive gel, except for Root ZX II at the 0.5 mark. Root ZX, CanalPro and Apex ID had similar accuracy when the 0.0/APEX mark was used to locate the foramen. For the radiographic method, no difference was found between the devices or radiographic views. CONCLUSION: Compared with alginate, the conductive gel of the ProTrain kit negatively affected most of the electronic readings. The three evaluated ERCLMDs had similar accuracy in locating the apical foramen when using the mark 0.0/APEX and alginate as the embedding media. Although the ProTrain platform allows radiographs to be exposed in both bucco-lingual and proximal views, no difference was found between the views when evaluating the apical limit provided by the 0.5 mark in mandibular premolars embedded in alginate.
Subject(s)
Dental Pulp Cavity , Root Canal Preparation , Electronics , Humans , Laboratories , Odontometry , Tooth Apex/diagnostic imagingABSTRACT
AIM: To compare the dissolution time of two solutions, a fluoride solution and a sodium hypochlorite solution, both saturated with sodium chloride, during the electrochemical dissolution of instruments consisting of conventional nickel-titanium alloy and Gold thermomechanically treated nickel-titanium alloy. METHODOLOGY: Two solutions, an NaF solution consisting of 12 g L-1 NaF with 180 g L-1 NaCl and an NaOCl solution consisting of 2.5% NaOCl with 180 g L-1 NaCl, were evaluated in a polarization test of a sample of 48 ProTaper Universal F1 (PTU F1) and WaveOne Gold Small (WOGS) instruments. The electric potentials were 0.5 V and 5 V for the NaF and NaOCl solutions, respectively. The electrochemical cell consisted of three electrodes for the polarization test of the PTU F1 and WOGS instruments, which had 6 mm of the tip immersed in the test solutions. The electric current was recorded for 540 s. If complete dissolution of the immersed tip occurred in less than the expected time, the experiment was considered complete. The time variations (in seconds) of the instruments in the solutions were measured. Data were subjected to statistical analysis using the Mann-Whitney, Kruskal-Wallis and Dunn tests. The corrosion patterns of the instruments were evaluated by scanning electron microscopy (SEM). RESULTS: The NaF and NaOCl solutions were associated with significantly different (P = 0.000) dissolution times of the instrument, with mean values of 12.96 s and 83.63 s, respectively. There was no significant difference (P = 0.649) in dissolution time between the PTU F1 and WOGS instruments. CONCLUSIONS: NaF and NaOCl solutions were able to electrochemically dissolve PTU F1 and WOGS instruments. However, the NaF solution achieved dissolution in significantly less time.
Subject(s)
Fluorides , Sodium Hypochlorite , Dental Instruments , Equipment Failure , Gold , Materials Testing , Nickel , Root Canal Preparation , Solubility , TitaniumABSTRACT
AIM: To investigate the association of clinical variables and polymorphisms (tag SNPs) in the interleukin 4 (IL4) gene, with the prognosis of avulsed and replanted teeth. METHODOLOGY: Ninety-four patients who suffered avulsion and had their teeth replanted and endodontically treated were included. Periapical radiographs were obtained soon after tooth replantation and after 1 year. For genotypic IL4 gene analysis, the DNA from oral mucosa cells was collected, and polymorphisms were investigated by real-time PCR. Univariate and multivariate analyses were performed to verify the association of clinical and genetic variables and the outcome of the replanted teeth (P < 0.05). RESULTS: After multivariate analysis, extra-alveolar time longer than 1 h was significantly associated with external root resorption. No significant association was observed between IL4 gene polymorphisms and root resorption. CONCLUSION: No association between root resorption and IL4 gene polymorphisms was observed. An extra-alveolar time of more than 1 h was associated with a susceptibility for external root resorption. Replanting the tooth in its socket immediately is the most important factor to maintain a healthy root surface.
Subject(s)
Interleukin-4/genetics , Polymorphism, Single Nucleotide , Root Resorption , Tooth Avulsion/therapy , Tooth Replantation , Adolescent , Adult , Case-Control Studies , Child , Child, Preschool , Female , Humans , Male , Middle Aged , Multivariate Analysis , Prognosis , Root Resorption/genetics , Time-to-Treatment , Young AdultABSTRACT
AIM: To assess the effect of sodium chloride concentration in fluoridated solutions during the electrochemical dissolution of fractured rotary endodontic instruments. METHODOLOGY: Two solutions were assessed (solution 1: NaF 12 g L-1 + NaCl 1 g L-1 , pH = 5.0; and solution 2: NaF 12 g L-1 + NaCl 180 g L-1 , pH = 5.0) using two tests: the ProTaper Universal F1 (PTU F1) instrument polarization test and the polarization test for intracanal PTU F1 fragments fractured in mandibular incisors. In the first test, two sets of five instruments were separately and partially immersed in each solution, and the electrical current was evaluated over 30 min. In the second test, 45 PTU F1 instruments were fractured within the root canals of mandibular incisors and subjected to potentiodynamic polarization for 30 min. The electrical current and the variations in the length of PTU F1 fragments were measured. The data were analysed statistically (anova and Wilcoxon and Mann-Whitney tests, respectively). RESULTS: Solution 2 was associated with more corrosive effects in both tests. In the first test, the PTU F1 instruments immersed in solution 2 had a higher electrical current (P < 0.001) and had a total dissolution time of approximately 540 s. In the second test, a larger difference between the baseline and final lengths of the fragments was noted in solution 2 (P = 0.011). CONCLUSION: Saturation of fluoridated solution with sodium chloride led to an increase in electrical current and microscopic reductions in the length of fractured instrument fragments subjected to electrochemical dissolution.
Subject(s)
Dental Instruments/adverse effects , Equipment Failure , Incisor/metabolism , Nickel , Titanium , Dental Pulp Cavity/metabolism , Electrochemistry/methods , Electrodes , HumansABSTRACT
OBJECTIVE: The study aimed to verify the potential correlation between the detected amount of gram-negative bacteria and the radiographic sizes of the lesions in patients with symptomatic and asymptomatic apical periodontitis. Furthermore, to evaluate whether the expression of receptor activator of NF-κB ligand (RANKL) and osteoprotegerin (OPG) and the RANKL/OPG ratio are differentially regulated in both groups. DESIGN: Twenty patients with periapical lesions were divided into two groups: symptomatic (SYM) n=10 and asymptomatic (ASYM) n=10. After periapical surgery, the lesions were collected and processed for histological examination, and immunohistochemistry. The percentage of RANKL- and OPG-immunopositive areas relative to the total area of the microscopic field was calculated. For gram staining, the number of gram-negative cells per microscopic field was assessed. The radiographs of each patient were processed and measured. The Student's t-test and the Pearson correlation coefficient were performed. RESULTS: The SYM group showed a significantly higher number of gram-negative cells (p=0.007) when compared to the ASYM group. A higher number of gram-negative bacteria occurred more frequently in larger periapical lesions and the SYM group (p=0.03). The expression for RANKL and OPG and the RANKL/OPG ratio were not significantly different between the groups. There was a significant positive correlation between the number of bacteria and OPG levels in the SYM group (p=0.01). CONCLUSION: The number of bacteria seems to influence the symptoms and the radiographic size of a periapical lesion. Gram-negative bacteria may play an important role in OPG activity in the SYM group.
Subject(s)
Gram-Negative Bacteria/isolation & purification , Osteoprotegerin/biosynthesis , Periapical Periodontitis/metabolism , Periapical Periodontitis/microbiology , RANK Ligand/biosynthesis , Adult , Asymptomatic Infections , Female , Gram-Negative Bacterial Infections/diagnostic imaging , Gram-Negative Bacterial Infections/metabolism , Gram-Negative Bacterial Infections/microbiology , Gram-Negative Bacterial Infections/pathology , Humans , Male , Periapical Periodontitis/diagnostic imaging , Periapical Periodontitis/pathology , Young AdultABSTRACT
OBJECTIVES: To assess the influence of metallic posts in the detection of simulated vertical root fractures (VRFs) using the following imaging examinations: 2 cone beam CT (CBCT) systems [CBCT1: NewTom(®) 3G (QR Srl, Verona, Italy) and CBCT2: i-CAT Next Generation(®) (Imaging Sciences International, Hatfield, PA)] and film and digital radiographs. Additionally, the influence of the orientation of the fracture line in the detection of VRFs was evaluated. METHODS: 100, human, single-rooted endodontically treated premolars were divided into 5 groups (Group 1: with posts and buccolingual VRFs, Group 2: with posts and mesiodistal VRFs, Group 3: without posts and with buccolingual VRFs, Group 4: without posts and with mesiodistal VRFs, and Group 5: with posts and without VRFs). The premolars were placed in human mandibles and imaged using the four examination modalities. The sensitivity and the specificity of each examination in the experimental groups were calculated. The data were analysed using Student's t-test. RESULTS: The presence of metallic posts reduced the sensitivity of the CBCT1 system (p = 0.0244). Digital radiographs and the CBCT1 and CBCT2 systems had a higher sensitivity in detecting buccolingual fractures in teeth with posts, whereas film and digital radiographs had a higher sensitivity in detecting buccolingual fractures in teeth without posts (p < 0.05). The CBCT1 examination demonstrated the lowest specificity (p < 0.05). CONCLUSIONS: The presence of metallic posts did not influence the sensitivity of most of the examinations, excluding the CBCT1 system. The fracture line orientation may influence VRF detection.
Subject(s)
Cone-Beam Computed Tomography/statistics & numerical data , Dental Alloys , Post and Core Technique/instrumentation , Radiography, Dental, Digital/statistics & numerical data , Tooth Fractures/diagnostic imaging , Tooth Root/injuries , X-Ray Film , Bicuspid/diagnostic imaging , Cone-Beam Computed Tomography/instrumentation , Humans , Image Processing, Computer-Assisted/statistics & numerical data , Observer Variation , Radiography, Dental, Digital/instrumentation , Sensitivity and Specificity , Tooth Fractures/classification , Tooth, Nonvital/diagnostic imaging , X-Ray Film/statistics & numerical dataABSTRACT
AIM: To evaluate in vivo the accuracy of the Root ZX II (J. Morita) apex locator in controlling the apical extent of rotary instrumentation when using the Auto Apical Reverse (AAR) set at the levels 0.5, 1.0 and 1.5. METHODOLOGY: Thirty single-rooted premolar teeth scheduled for extraction were divided into three groups (n = 10), according to the AAR setting 0.5, 1.0 and 1.5. The root canals were prepared using ProTaper (Dentsply Maillefer). After rotary instrumentation, the last file used (F3) was manually introduced into the extent of the root canal preparation and fixed before tooth extraction. The apical third of the root was dissected until exposure of the file. The distance from the file tip to the major apical foramen was obtained. RESULTS: Measurements within the range -1.0 to 0.0 mm were obtained in 30% of the teeth with AAR 0.5, 50% with AAR 1.0 and in 0% with AAR 1.5. The proportions test revealed a significant difference between the AAR settings 1.0 and 1.5 (P = 0.0188). Overinstrumentation occurred in 70% of the teeth with AAR 0.5 and in 40% with AAR 1.0. The measurements short of the acceptable range occurred in 10% of the teeth with setting AAR 1.0 and in 100% of the cases with AAR 1.5. A significant difference was found when comparing the percentage of teeth in which the file tip was short and beyond the established range between groups, except when comparing AAR 0.5 and AAR 1.0. CONCLUSION: The AAR function of the Root ZX II was not an accurate method for controlling the apical extent of rotary instrumentation in vivo. The setting 0.5 presented overinstrumentation in most of the canals, the setting 1.5 was short in all cases, and the setting 1.0 provided an adequate working length in only 50% of the teeth.