Functional Hydrogels for Delivery of the Proteolytic Enzyme Serratiopeptidase.

Hydrogels are superior wound dressings because they can provide protection and hydration of the wound, as well as the controlled release of therapeutic substances to aid tissue regeneration and the healing process. Hydrogels obtained from natural precursors are preferred because of their low cost, biocompatibility, and biodegradability. We describe the synthesis of novel functional hydrogels based on two natural products-citric acid (CA) and pentane-1,2,5-triol (PT, a product from lignocellulose processing) and poly(ethylene glycol) (PEG-600)-via an environment friendly approach. The hydrogels were prepared via monomer crosslinking through a polycondensation reaction at an elevated temperature in the absence of any solvent. The reagents were blended at three different compositions with molar ratios of hydroxyl (from PT and PEG) to carboxyl (from CA) groups of 1:1, 1:1.4, and 1.4:1, respectively. The effect of the composition on the physicomechanical properties of materials was investigated. All hydrogels exhibited pH-sensitive behavior, while the swelling degree and elastic modulus were dependent on the composition of the polymer network. The proteolytic enzyme serratiopeptidase (SER) was loaded into a hydrogel via physical absorption as a model drug. The release profile of SER and the effects of the enzyme on healthy skin cells were assessed. The results showed that the hydrogel carrier could provide the complete release of the loaded enzyme.

Ecotoxicological assessment of biomass-derived furan platform chemicals using aquatic and terrestrial bioassays.

An environmental toxicological assessment of fourteen furanic compounds serving as valuable building blocks produced from biomass was performed. The molecules selected included well studied compounds serving as control examples to compare the toxicity exerted against a variety of highly novel furans which have been additionally targeted as potential or current alternatives to biofuels, building blocks and polymer monomers. The impact of the furan platform chemicals targeted on widely applied ecotoxicity model organisms was determined employing the marine bioluminescent bacterium Aliivibrio fischeri and the freshwater green microalgae Raphidocelis subcapitata, while their ecotoxicity effects on plants were assessed using dicotyledonous plants Sinapis alba and Lepidium sativum. Regarding the specific endpoints evaluated, the furans tested were slightly toxic or practically nontoxic for A. fischeri following 5 and 15 min of exposure. Moreover, most of the building blocks did not affect the growth of L. sativum and S. alba at 150 mg L-1 for 72 h of exposure. Specifically, 9 and 11 out of the 14 furan platform chemicals tested were non-effective or stimulant for L. sativum and S. alba respectively. Given that furans comprise common inhibitors in biorefinery fermentations, the growth inhibition of the specific building blocks was studied using the industrial workhorse yeast Saccharomyces cerevisiae, demonstrating insignificant inhibition on eukaryotic cell growth following 6, 12 and 16 h of exposure at a concentration of 500 mg L-1. The study provides baseline information to unravel the ecotoxic effects and to confirm the green aspects of a range of versatile biobased platform molecules.

Cu-Catalyzed Tandem Oxidation-Intramolecular Cannizzaro Reaction of Biorenewables and Bioactive Molecules.

A tandem Cu-catalyzed oxidation-intramolecular Cannizzaro reaction leading to bioactive α-hydroxyesters from α-hydroxyketones is reported. The process uses oxygen as a sole oxidant to achieve the formation of glyoxals, which are efficiently converted in situ to important α-hydroxyesters. The mechanistic insights are provided by isotopic labeling and supported by DFT calculations. The transformation proved a robust synthetic tool to achieve the synthesis of human metabolites and hydroxyl esters of various biologically active steroid derivatives.

Biorenewable Oxypropylated Pentane-1,2,5-triol as a Source for Incorporation in Rigid Polyurethane Foams.

In this study, as a product from the efficient Achmatowicz rearrangement and mild subsequent hydrogenation-reduction reactions of biorenewable C5 alcohols derived from lignocellulose, pentane-1,2,5-triol was successfully used after oxypropylation in the preparation of rigid polyurethane foams-one of the most important classes of polymeric materials. Despite the broad range of applications, the production of polyurethanes is still highly dependent on petrochemical materials considering the need of renewable raw materials and new process technologies for the production of polyol or isocyanate components as a key point for the sustainable development of polyurethane foams. The synthesized oxypropylated pentane-1,2,5-triol was analyzed using proton NMR spectroscopy, hydroxyl number, and viscosity, whereas the newly obtained foams incorporated with up to 30% biorenewable polyol were characterized using compressive stress, thermogravimetry, dynamic mechanical analysis, and scanning electron microscopy. The modified rigid polyurethanes showed better compressive strength (>400.0 kPa), a comparable thermal degradation range at 325-450 °C, and similar morphological properties to those of commercial polyurethane formulations.

Incorporation of Resveratrol in Polymeric Nanogel for Improvement of Its Protective Effects on Cellular and Microsomal Oxidative Stress Models.

Nanogels are attractive drug delivery systems that provide high loading capacity for drug molecules, improve their stability, and increase cellular uptake. Natural antioxidants, especially polyphenols such as resveratrol, are distinguished by low aqueous solubility, which hinders therapeutic activity. Thus, in the present study, resveratrol was incorporated into nanogel particles, aiming to improve its protective effects in vitro. The nanogel was prepared from natural substances via esterification of citric acid and pentane-1,2,5-triol. High encapsulation efficiency (94.5%) was achieved by applying the solvent evaporation method. Dynamic light scattering, atomic force microscopy, and transmission electron microscopy revealed that the resveratrol-loaded nanogel particles were spherical in shape with nanoscopic dimensions (220 nm). In vitro release tests showed that a complete release of resveratrol was achieved for 24 h, whereas at the same time the non-encapsulated drug was poorly dissolved. The protective effect of the encapsulated resveratrol against oxidative stress in fibroblast and neuroblastoma cells was significantly stronger compared to the non-encapsulated drug. Similarly, the protection in a model of iron/ascorbic acid-induced lipid peroxidation on rat liver and brain microsomes was higher with the encapsulated resveratrol. In conclusion, embedding resveratrol in this newly developed nanogel improved its biopharmaceutical properties and protective effects in oxidative stress models.

Ru-Catalyzed Isomerization of Achmatowicz Derivatives: A Sustainable Route to Biorenewables and Bioactive Lactones.

A Ru-catalyzed isomerization of Achmatowicz derivatives that opens unexplored routes to diversify the biogenic furanic platform is reported. The mechanistic insights of this formally redox-neutral intramolecular process were studied computationally and by deuterium labeling. The transformation proved to be a robust synthetic tool to achieve the synthesis of bioderived-monomers and a series of 4-keto-δ-valerolactones that further enabled the development of a flexible strategy for the synthesis of acetogenins. A concise and protective group-free asymmetric total synthesis of two natural products, namely, (S,S)-muricatacin and the (S,S)-L-factor, is also described.

Alternative Assisted Extraction Methods of Phenolic Compounds Using NaDESs.

A renewed understanding of eco-friendly principles is moving the industrial sector toward a shift in the utilization of less harmful solvents as a main strategy to improve manufacturing. Green analytical chemistry (GAC) has definitely paved the way for this transition by presenting green solvents to a larger audience. Among the most promising, surely DESs (deep eutectic solvents), NaDESs (natural deep eutectic solvents), HDESs (hydrophobic deep eutectic solvents), and HNaDESs (hydrophobic natural deep eutectic solvents), with their unique features, manifest a wide-range of applications, including their use as a means for the extraction of small bioactive compounds. In examining recent advancements, in this review, we want to focus our attention on some of the most interesting and novel 'solvent-free' extraction techniques, such as microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) in relation to the possibility of better exploiting DESs and NaDESs as plausible extracting solvents of the phenolic compounds (PCs) present in different matrices from olive oil components, such as virgin olive pomace, olive leaves and twigs, virgin and extra virgin olive oil (VOO and EVOO, respectively), and olive cake and olive mill wastewaters (OMWW). Therefore, the status of DESs and NaDESs is shown in terms of their nature, efficacy and selectivity in the extraction of bioactive phytochemicals such as secoiridoids, lignans, phenolic acids and alcohols. Related studies on experimental design and processes' optimization of the most promising DESs/NaDESs are also reviewed. In this framework, an extensive list of relevant works found in the literature is described to consider DESs/NaDESs as a suitable alternative to petrochemicals in cosmetics, pharmaceutical, or food applications.

Functional Nanogel from Natural Substances for Delivery of Doxorubicin.

Nanogels (NGs) have attracted great attention because of their outstanding biocompatibility, biodegradability, very low toxicity, flexibility, and softness. NGs are characterized with a low and nonspecific interaction with blood proteins, meaning that they do not induce any immunological responses in the body. Due to these properties, NGs are considered promising candidates for pharmaceutical and biomedical application. In this work, we introduce the development of novel functional nanogel obtained from two naturally based products-citric acid (CA) and pentane-1,2,5-triol (PT). The nanogel was synthesized by precipitation esterification reaction of CA and PT in tetrahydrofuran using N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide (EDC) and 4-(dimethylamino)pyridine (DMAP) catalyst system. Dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryo-TEM) and atomic force microscopy (AFM) analyses revealed formation of spherical nanogel particles with a negative surface charge. Next, the nanogel was loaded with doxorubicin hydrochloride (DOX) by electrostatic interactions between carboxylic groups present in the nanogel and amino groups of DOX. The drug-loaded nanogel exhibited high encapsulation efficiency (EE~95%), and a bi-phasic release behavior. Embedding DOX into nanogel also stabilized the drug against photodegradation. The degradability of nanogel under acidic and neutral conditions with time was investigated as well.

Base-promoted direct amidation of esters: beyond the current scope and practical applications.

The base-promoted direct amidation of unactivated esters is among the most useful reactions for amide bond formation in contemporary organic chemistry. The intensive research in this area has led to the development of a number of new methods to achive this transformation. However, to date, the existing literature is more methodological and in many instances lacks practical directions. Therefore, the full potential of this transformation is yet to be revealed by broadening the substrate scope. In a search for new practical applications of the amidation reaction, herein we present a comprehensive study of a number of base-promoted direct amidations that encompass a wide range of amines and esters. Furthermore, we applied our findings in the synthesis of phosphoramidates and several industrially relevant products.

Site-Selective C-H Functionalization of Arenes Enabled by Noncovalent Interactions.

The direct metal-catalyzed C-H functionalization of arenes has emerged as a powerful tool for streamlining the synthesis of complex molecular scaffolds. However, despite the different chemical environments, the energy values of all C-H bonds are within a fairly narrow range; hence, the regioselective C-H bond functionalization poses a great challenge. The use of covalently bound directing groups is to date the most exploited approach to achieve regioselective C-H functionalization of arenes. However, the required installation and removal of those groups is a serious drawback. Recently, new strategies for regioselective metal-catalyzed distal C-H functionalization of arenes based on noncovalent forces (hydrogen bonds, Lewis acid-base interactions, ionic or electrostatic forces, etc.) have been developed to tackle these issues. Nowadays, these approaches have already showcased impressive advances. Therefore, the aim of this mini-review is to cover chronologically how these groundbreaking strategies evolved over the past decade.

CO2 Adsorption on Modified Mesoporous Silicas: The Role of the Adsorption Sites.

The post-synthesis procedure for cyclic amine (morpholine and 1-methylpiperazine) modified mesoporous MCM-48 and SBA-15 silicas was developed. The procedure for preparation of the modified mesoporous materials does not affect the structural characteristics of the initial mesoporous silicas strongly. The initial and modified materials were characterized by XRD, N2 physisorption, thermal analysis, and solid-state NMR. The CO2 adsorption of the obtained materials was tested under dynamic and equilibrium conditions. The NMR data revealed the formation of different CO2 adsorbed forms. The materials exhibited high CO2 absorption capacity lying above the benchmark value of 2 mmol/g and stretching out to the outstanding 4.4 mmol/g in the case of 1-methylpiperazin modified MCM-48. The materials are reusable, and their CO2 adsorption capacities are slightly lower in three adsorption/desorption cycles.

Creating Diversity from Biomass: A Tandem Bio/Metal-Catalysis towards Chemoselective Synthesis of Densely Substituted Furans.

A new chemoselective (enzymatic desymmetrization/Ru-catalyzed C-H activation) sequence to obtain differently substituted furans from the largely available 2,5-furandicarboxylic acid (FDCA) was developed. Series of di- and trisubstituted furans were prepared in very good yields and excellent chemoselectivity. This study discloses a new approach towards valorization of the furanics platform through the use of FDCA as a stable intermediate, thus circumventing the chemical instability of the parent 5-hydroxymethylfurfural.

Biorefinery via Achmatowicz Rearrangement: Synthesis of Pentane-1,2,5-triol from Furfuryl Alcohol.

A new scalable synthesis of pentane-1,2,5-triol from the furanics platform has been developed. Excellent yields of up to 92 % are obtained under flow conditions by using readily available catalysts from the existing pool. The strategy exploits the highly functionalized Achmatowicz product as a key intermediate, thus circumventing problems related to the low reactivity of the parent furfural and furfuryl alcohol. Besides expanding the portfolio of biomass-derived C5 alcohols, this strategy may also be further applied for the establishment of a versatile bio-based chemical platform.

Production and Synthetic Modifications of Shikimic Acid.

Shikimic acid is a natural product of industrial importance utilized as a precursor of the antiviral Tamiflu. It is nowadays produced in multihundred ton amounts from the extraction of star anise ( Illicium verum) or by fermentation processes. Apart from the production of Tamiflu, shikimic acid has gathered particular notoriety as its useful carbon backbone and inherent chirality provide extensive use as a versatile chiral precursor in organic synthesis. This review provides an overview of the main synthetic and microbial methods for production of shikimic acid and highlights selected methods for isolation from available plant sources. Furthermore, we have attempted to demonstrate the synthetic utility of shikimic acid by covering the most important synthetic modifications and related applications, namely, synthesis of Tamiflu and derivatives, synthetic manipulations of the main functional groups, and its use as biorenewable material and in total synthesis. Given its rich chemistry and availability, shikimic acid is undoubtedly a promising platform molecule for further exploration. Therefore, in the end, we outline some challenges and promising future directions.

Valorization of Oleuropein via Tunable Acid-Promoted Methanolysis.

The acid-promoted methanolysis of oleuropein was studied using a variety of homogeneous and heterogeneous acid catalysts. Exclusive cleavage of the acetal bond between the glucoside and the monoterpene subunits or further hydrolysis of the hydroxytyrosol ester and subsequent intramolecular rearrangement were observed upon identification of the most efficient catalyst and experimental conditions. Furthermore, selected conditions were tested using oleuropein under continuous flow and using a crude mixture extracted from olive leaves under batch. Formation of (-)-methyl elenolate was also observed in this study, which is a reported precursor for the synthesis of the antihypertensive drug (-)-ajmalicine.

Going Beyond the Limits of the Biorenewable Platform: Sodium Dithionite-Promoted Stabilization of 5-Hydroxymethylfurfural.

The lack of thermal and storage stability and occurrence of side reactions during the processing of 5-hydroxymethylfurfural (5-HMF) limits its potential as biorenewable platform molecule. The addition of small amounts of the readily available sodium dithionite has a remarkable effect on promoting the stability of 5-HMF and inhibiting side reactions, thus helping to circumvent such limitations. The addition of sodium dithionite led to improvements in thermal stability (120 °C, 4 h, neat; 100 % vs. 37 %), under distillation (yield: 85 % vs. 52 %), and in a wide range of reactions, including 5-HMF synthesis under biphasic conditions (yield: 98 % vs. 67 %; purity: 92 % vs. 83 %) and 5-HMF transformations, such as Knoevenagel condensation with Meldrum's acid (yield: 96 % vs. 74 %), Cannizaro reaction (yield: quantitative vs. 83 %), and condensation with primary diamines to give pyridinium salts (yield: 88 % vs. 60 %).

C2-Modified Sparteine Derivatives Are a New Class of Potentially Long-Acting Sodium Channel Blockers.

The lupin alkaloid sparteine is a well-known chiral diamine with a range of applications in asymmetric synthesis, as well as a blocker of voltage-gated sodium channels (VGSCs). However, there is only scarce information on the VGSC-blocking activity of sparteine derivatives where the structure of the parent alkaloid is retained. Building on the recent renewed availability of sparteine and derivatives we report herein how modification of sparteine at position 2 produces irreversible blockers of VGSCs. These compounds could be clinically envisaged as long-lasting local anesthetics.

Oxidation of 5-Chloromethylfurfural (CMF) to 2,5-Diformylfuran (DFF).

2,5-Diformylfuran (DFF) is an important biorenewable building block, namely for the manufacture of new polymers that may replace existing materials derived from limited fossil fuel resources. The current reported methods for the preparation of DFF are mainly derived from the oxidation of 5-hydroxymethylfurfural (HMF) and, to a lesser extent, directly from fructose. 5-Chloromethylfurfural (CMF) has been considered an alternative to HMF as an intermediate building block due to its advantages regarding stability, polarity, and availability from glucose and cellulose. The only reported method for the transformation of CMF to DFF is restricted to the use of DMSO as the solvent and oxidant. We envisioned that the transformation could be performed using more attractive conditions. To that end, we explored the oxidation of CMF to DFF by screening several oxidants such as H2O2, oxone, and pyridine N-oxide (PNO); different heating methods, namely thermal and microwave irradiation (MWI); and also flow conditions. The combination of PNO (4 equiv.) and Cu(OTf)2 (0.5 equiv.) in acetonitrile was identified as the best system, which lead to the formation of DFF in 54% yield under MWI for 5 min at 160 °C. Consequently, a range of different heterogeneous copper catalysts were tested, which allowed for catalyst reuse. Similar results were also observed under flow conditions using copper immobilized on silica under thermal heating at 160 °C for a residence time of 2.7 min. Finally, HMF and 5,5'-oxybis(5-methylene-2-furaldehyde) (OBMF) were the only byproducts identified under the reaction conditions studied.

Synthesis of Chiral Cyclopentenones.

The cyclopentenone unit is a very powerful synthon for the synthesis of a variety of bioactive target molecules. This is due to the broad diversity of chemical modifications available for the enone structural motif. In particular, chiral cyclopentenones are important precursors in the asymmetric synthesis of target chiral molecules. This Review provides an overview of reported methods for enantioselective and asymmetric syntheses of cyclopentenones, including chemical and enzymatic resolution, asymmetric synthesis via Pauson-Khand reaction, Nazarov cyclization and organocatalyzed reactions, asymmetric functionalization of the existing cyclopentenone unit, and functionalization of chiral building blocks.

Controlled tautomeric switching in azonaphthols tuned by substituents on the phenyl ring.

A series of new tautomeric azonaphthols are synthesized and the possibilities for molecular switching are investigated using molecular spectroscopy, X-ray analysis and density functional theory quantum chemical calculations. Two opposite effects that influence switching are studied: attaching a piperidine sidearm, and adding substituents to the phenyl ring. On the one hand, the attached piperidine moiety stabilizes the enol form leading to a controlled shift of the equilibrium upon protonation. On the other hand, the relative stability of the azonaphthol tautomers strongly depends on the effects of the substituents on the phenyl ring: electron donors tend to stabilize the enol tautomer, whereas electron acceptors lead to stabilization of the keto form. However, these effects do not shift fully the equilibrium towards either of the tautomers. Nevertheless, the effect of the substituents can be an additional tool to affect the switching between "on" and "off" states. Electron-withdrawing substituents stabilize the keto form and impede switching to the off state, whereas electron donors stabilize the enol form. The effect of the piperidine unit is dominant overall, and with strongly electron-withdrawing substituents at the phenyl ring, the enol form exists as a zwitterion.