Environmental and occupational exposure to bisphenol compounds in Finland.

The aim of the study was to assess non-occupational and occupational exposure to bisphenol compounds in Finland. The participants were 151 non-occupationally exposed volunteers and 15 potentially exposed employees of a sewage-pipe relining company and a floor-coating company. The following chemicals were measured in the urine samples: bisphenol A (BPA), bisphenol F (BPF), bisphenol A diglycidyl ether (BADGE), bisphenol F diglycidyl ether (BFDGE), and the metabolites of the latter two [bisphenol A (2,3-dihydroxypropyl) glycidyl ether (BADGE·H2O), bisphenol A bis(2,3-dihydroxypropyl) ether (BADGE·2 H2O), bisphenol A (3-chloro-2-hydroxypropyl) (2,3-dihydroxypropyl) ether (BADGE·HCl·H2O), bisphenol A (3-chloro-2-hydroxypropyl) glycidyl ether (BADGE·HCl), and bisphenol A bis(3-chloro-2-hydroxypropyl) ether (BADGE·2HCl) and bisphenol F bis(2,3-dihydroxypropyl) ether (BFDGE·2 H2O), and bisphenol F bis(3-chloro-2-hydroxypropyl) ether (BFDGE·2HCl)]. BADGE and BFDGE were also measured in breathing zone air samples and hand-wipe samples of the sewage-pipe relining and floor-coating workers. Non-occupational exposure to BPA has decreased in Finland. The BPF level of the non-occupationally exposed was higher than the respective levels reported in the recent literature. BPA and BPF concentrations in the workers' urine samples were in the same range as those in the corresponding concentrations of the non-occupationally exposed population. Higher concentrations of BADGE and BFDGE metabolites were found in some of the workers' urine samples. Elevated urine concentrations were also observed in the samples collected the next morning. Some of the urinary BADGE and BFDGE metabolite results correlated with the hand-wipe results. The results show that occupational exposure to BADGE and BFDGE may occur in sewage-pipe relining and floor-coating work. They also indicate that dermal contamination plays a role in total exposure. Although the measured urinary levels indicate that the absorption of these bisphenol compounds are unlikely to pose a systemic health risk, the risk of dermal sensitization remains.

HBM4EU E-waste study: Assessing persistent organic pollutants in blood, silicone wristbands, and settled dust among E-waste recycling workers in Europe.

E-waste recycling is an increasingly important activity that contributes to reducing the burden of end-of-life electronic and electrical apparatus and allows for the EU's transition to a circular economy. This study investigated the exposure levels of selected persistent organic pollutants (POPs) in workers from e-waste recycling facilities across Europe. The concentrations of seven polychlorinated biphenyls (PCBs) and eight polybrominated diphenyl ethers (PBDEs) congeners were measured by GC-MS. Workers were categorized into five groups based on the type of e-waste handled and two control groups. Generalized linear models were used to assess the determinants of exposure levels among workers. POPs levels were also assessed in dust and silicone wristbands (SWB) and compared with serum. Four PCB congeners (CB 118, 138, 153, and 180) were frequently detected in serum regardless of worker's category. With the exception of CB 118, all tested PCBs were significantly higher in workers compared to the control group. Controls working in the same company as occupationally exposed (Within control group), also displayed higher levels of serum CB 180 than non-industrial controls with no known exposures to these chemicals (Outwith controls) (p < 0.05). BDE 209 was the most prevalent POP in settled dust (16 µg/g) and SWB (220 ng/WB). Spearman correlation revealed moderate to strong positive correlations between SWB and dust. Increased age and the number of years smoked cigarettes were key determinants for workers exposure. Estimated daily intake through dust ingestion revealed that ΣPCB was higher for both the 50th (0.03 ng/kg bw/day) and 95th (0.09 ng/kg bw/day) percentile exposure scenarios compared to values reported for the general population. This study is one of the first to address the occupational exposure to PCBs and PBDEs in Europe among e-waste workers through biomonitoring combined with analysis of settled dust and SWB. Our findings suggest that e-waste workers may face elevated PCB exposure and that appropriate exposure assessments are needed to establish effective mitigation strategies.

HBM4EU chromates study - PFAS exposure in electroplaters and bystanders.

The study aims to reveal the exposure to perfluoroalkyl substances (PFAS) in workers in different industry sectors with exposures to hexavalent chromium (Cr(VI)). The PFAS exposure of in total 172 individuals from 4 countries was assessed by the determination of 8 perfluoroalkyl carboxylic acids and 4 perfluoroalkyl sulfonic acids in plasma samples. The participants were 52 chrome plating workers, 43 welders, 3 surface treating workers and 74 workers without any occupational Cr exposure as controls. Significant differences between workers with Cr exposure and controls were found for the perfluoroalkyl sulfonic acids, particularly for perfluorooctane sulfonic acid (PFOS). The median and maximum levels were, respectively, 4.83 and 789 µg/l for chrome plating workers, 4.97 and 1513 µg/l for welders, and 3.65 and 13.9 µg/l for controls. The considerably high PFOS exposure in Cr platers and welders can be explained by the former application of PFOS as mist suppressants in electroplating baths, which resulted in an exposure of the directly involved operators, but also of welders performing maintenance and repair service at these workplaces.

Decoding Polarization in a Single Achiral Gold Nanostructure from Emitted Far-Field Radiation.

The emergence of optical chirality in the light emitted from plasmonic nanostructures is commonly associated with their geometrical chirality. Although it has been demonstrated that even achiral structures can exhibit chiral near-fields, the existence of chiroptical far-field responses of such structures is widely neglected. In this paper, we present a detailed analysis of the polarization state in a single planar achiral plasmonic nanostructure that sustains more than one prominent plasmon mode. In consideration of the relative phase, the superposition of the fields associated with these modes determines the polarization state of the emitted light in the far-field. Supported by simulations of the surface charge distribution of the particle, we show that the polarization state of the emitted light is already determined in the near-field. The chiroptical far-field responses are analyzed by polarized single-particle dark-field scattering spectroscopy. We introduce an analytical model that enables us to obtain the polarization information from the spectra of structures with dipolar resonances taken under unpolarized illumination. The same principle is confirmed in polarimetric spectroscopy measurements on rhomboids with systematically varied angles, therefore, introducing increasing values of geometrical chirality to the structures. The agreement between the calculation and measurement demonstrates the general validity of our model for both chiral and achiral structures.

Micro-computed Tomography-Based Collagen Orientation and Anisotropy Analysis of Rabbit Articular Cartilage.

The collagen network is the highly organized backbone of articular cartilage providing tissue tensile stiffness and restricting proteoglycan bleaching out of the tissue. Osteoarthritis (OA) diminishes proper collagen network adaptation. Our aim was to provide quantitative three-dimensional (3D) information of the cartilage collagen network adaptation in early osteoarthritis using high resolution micro-computed tomography (µCT)-imaging. Osteochondral samples from the femoral condyles were collected from healthy (N = 8, both legs) and experimental OA rabbit model with anterior cruciate ligament transection (N = 14, single leg). Samples were processed for cartilage µCT-imaging and histological evaluation with polarized light microscopy (PLM). Structure tensor analysis was used to analyse the collagen fibre orientation and anisotropy of the µCT-images, and PLM was used as a validation for structural changes. Depth-wise comparison of collagen fibre orientation acquired with µCT-imaging and PLM correlated well, but the values obtained with PLM were systematically greater than those measured with µCT-imaging. Structure tensor analysis allowed for 3D quantification of collagen network anisotropy. Finally, µCT-imaging revealed only minor differences between the control and experimental groups.

How to use human biomonitoring in chemical risk assessment: Methodological aspects, recommendations, and lessons learned from HBM4EU.

One of the aims of the European Human Biomonitoring Initiative, HBM4EU, was to provide examples of and good practices for the effective use of human biomonitoring (HBM) data in human health risk assessment (RA). The need for such information is pressing, as previous research has indicated that regulatory risk assessors generally lack knowledge and experience of the use of HBM data in RA. By recognising this gap in expertise, as well as the added value of incorporating HBM data into RA, this paper aims to support the integration of HBM into regulatory RA. Based on the work of the HBM4EU, we provide examples of different approaches to including HBM in RA and in estimations of the environmental burden of disease (EBoD), the benefits and pitfalls involved, information on the important methodological aspects to consider, and recommendations on how to overcome obstacles. The examples are derived from RAs or EBoD estimations made under the HBM4EU for the following HBM4EU priority substances: acrylamide, o-toluidine of the aniline family, aprotic solvents, arsenic, bisphenols, cadmium, diisocyanates, flame retardants, hexavalent chromium [Cr(VI)], lead, mercury, mixture of per-/poly-fluorinated compounds, mixture of pesticides, mixture of phthalates, mycotoxins, polycyclic aromatic hydrocarbons (PAHs), and the UV-filter benzophenone-3. Although the RA and EBoD work presented here is not intended to have direct regulatory implications, the results can be useful for raising awareness of possibly needed policy actions, as newly generated HBM data from HBM4EU on the current exposure of the EU population has been used in many RAs and EBoD estimations.

Occupational Exposure and Health Impact Assessment of Diisocyanates in Finland.

Diisocyanates are a group of chemicals widely used in different industrial applications. The critical health effects related to diisocyanate exposure are isocyanate sensitisation, occupational asthma and bronchial hyperresponsiveness (BHR). Industrial air measurements and human biomonitoring (HBM) samples were gathered in specific occupational sectors to examine MDI, TDI, HDI and IPDI and the respective metabolites from Finnish screening studies. HBM data can give a more accurate picture of diisocyanate exposure, especially if workers have been exposed dermally or used respiratory protection. The HBM data were used for conducting a health impact assessment (HIA) in specific Finnish occupational sectors. For this purpose, exposure reconstruction was performed on the basis of HBM measurements of TDI and MDI exposures using a PBPK model, and a correlation equation was made for HDI exposure. Subsequently, the exposure estimates were compared to a previously published dose-response curve for excess BHR risk. The results showed that the mean and median diisocyanate exposure levels and HBM concentrations were low for all diisocyanates. In HIA, the excess risk of BHR from MDI exposure over a working life period was highest in the construction and motor and vehicle industries and repair sectors, resulting in estimated excess risks of BHR of 2.0% and 2.6%, and 113 and 244 extra BHR cases in Finland, respectively. Occupational exposure to diisocyanates must be monitored because a clear threshold for DI sensitisation cannot be established.

The HBM4EU chromates study - Outcomes and impacts on EU policies and occupational health practices.

Within the EU human biomonitoring initiative (HBM4EU), a targeted, multi-national study on occupational exposure to hexavalent chromium (Cr(VI)) was performed. Cr(VI) is currently regulated in EU under REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) and under occupational safety and health (OSH) legislation. It has recently been subject to regulatory actions to improve its risk management in European workplaces. Analysis of the data obtained within the HBM4EU chromates study provides support both for the implementation of these regulatory actions and for national enforcement programs and may also contribute to the updating of occupational limit values (OELs) and biological limit values for Cr(VI). It also provides useful insights on the contribution of different risk management measures (RMMs) to further reduce the exposure to Cr(VI) and may support the evaluation of applications for authorisation under REACH. Findings on chrome platers' additional per- and polyfluoroalkyl substances (PFAS) exposure highlight the need to also pay attention to this substance group in the metals sector. A survey performed to evaluate the policy relevance of the HBM4EU chromates study findings supports the usefulness of the study results. According to the responses received from the survey, the HBM4EU chromates study was able to demonstrate the added value of the human biomonitoring (HBM) approach in assessment and management of occupational exposure to Cr(VI). For future occupational studies, we emphasise the need for engagement of policy makers and regulators throughout the whole research process to ensure awareness, relevance and uptake of the results in future policies.

HBM4EU chromates study - the measurement of hexavalent and trivalent chromium in exhaled breath condensate samples from occupationally exposed workers across Europe.

The aim of this study was to investigate the practicability of exhaled breath condensate (EBC) as a biological matrix to detect and measure hexavalent chromium (Cr(VI)) and trivalent chromium (Cr(III)) in workers occupationally exposed to Cr(VI). EBC samples were collected from workers in France, Finland, Italy, The Netherlands and the United Kingdom from three different target activities: chrome platers, stainless steel welders and surface treatment workers. Pre and post working week EBC samples were collected from 177 exposed workers and 98 unexposed workers (control group). Hyphenated chromatography systems with inductively coupled plasma - mass spectrometry (ICP-MS) were for the analysis. The results showed that the occupationally exposed workers had significantly higher levels of Cr(VI) and Cr(III) than the control group. Chrome platers exhibited the highest Cr(VI) levels in their EBC samples, with a significant increase from their pre to post samples for both Cr(VI) and Cr(III). A significant difference was also found between pre and post EBC samples for Cr(III) in welders. This study has shown that EBC has the potential to be a valid, non-invasive biological matrix to assess occupational exposure to Cr(VI) and Cr(III) for biological monitoring assessment, with the ability to detect low level inhalation exposures.

HBM4EU Diisocyanates Study-Research Protocol for a Collaborative European Human Biological Monitoring Study on Occupational Exposure.

Diisocyanates have long been a leading cause of occupational asthma in Europe, and recently, they have been subjected to a restriction under the REACH regulations. As part of the European Human Biomonitoring project (HBM4EU), we present a study protocol designed to assess occupational exposure to diisocyanates in five European countries. The objectives of the study are to assess exposure in a number of sectors that have not been widely reported on in the past (for example, the manufacturing of large vehicles, such as in aerospace; the construction sector, where there are potentially several sources of exposure (e.g., sprayed insulation, floor screeds); the use of MDI-based glues, and the manufacture of spray adhesives or coatings) to test the usability of different biomarkers in the assessment of exposure to diisocyanates and to provide background data for regulatory purposes. The study will collect urine samples (analysed for diisocyanate-derived diamines and acetyl-MDI-lysine), blood samples (analysed for diisocyanate-specific IgE and IgG antibodies, inflammatory markers, and diisocyanate-specific Hb adducts for MDI), and buccal cells (micronucleus analysis) and measure fractional exhaled nitric oxide. In addition, occupational hygiene measurements (air monitoring and skin wipe samples) and questionnaire data will be collected. The protocol is harmonised across the participating countries to enable pooling of data, leading to better and more robust insights and recommendations.

HBM4EU chromates study - Usefulness of measurement of blood chromium levels in the assessment of occupational Cr(VI) exposure.

Occupational exposures to hexavalent Chromium (Cr(VI)) can occur in welding, hot working stainless steel processing, chrome plating, spray painting and coating activities. Recently, within the human biomonitoring for Europe initiative (HBM4EU), a study was performed to assess the suitability of different biomarkers to assess the exposure to Cr(VI) in various job tasks. Blood-based biomarkers may prove useful when more specific information on systemic and intracellular bioavailability is necessary. To this aim, concentrations of Cr in red blood cells (RBC-Cr) and in plasma (P-Cr) were analyzed in 345 Cr(VI) exposed workers and 175 controls to understand how these biomarkers may be affected by variable levels of exposure and job procedures. Compared to controls, significantly higher RBC-Cr levels were observed in bath plating and paint application workers, but not in welders, while all the 3 groups had significantly greater P-Cr concentrations. RBC-Cr and P-Cr in chrome platers showed a high correlation with Cr(VI) in inhalable dust, outside respiratory protective equipment (RPE), while such correlation could not be determined in welders. In platers, the use of RPE had a significant impact on the relationship between blood biomarkers and Cr(VI) in inhalable and respirable dust. Low correlations between P-Cr and RBC-Cr may reflect a difference in kinetics. This study showed that Cr-blood-based biomarkers can provide information on how workplace exposure translates into systemic availability of Cr(III) (extracellular, P-Cr) and Cr(VI) (intracellular, RBC-Cr). Further studies are needed to fully appreciate their use in an occupational health and safety context.

HBM4EU Chromates Study: Determinants of Exposure to Hexavalent Chromium in Plating, Welding and Other Occupational Settings.

Work-related exposures in industrial processing of chromate (chrome plating, surface treatment and welding) raise concern regarding the health risk of hexavalent chromium (Cr(VI)). In this study, performed under the HBM4EU project, we focused on better understanding the determinants of exposure and recognising how risk management measures (RMMs) contribute to a reduction in exposure. HBM and occupational hygiene data were collected from 399 workers and 203 controls recruited in nine European countries. Urinary total chromium (U-Cr), personal inhalable and respirable dust of Cr and Cr(VI) and Cr from hand wipes were collected. Data on the RMMs were collected by questionnaires. We studied the association between different exposure parameters and the use of RMMs. The relationship between exposure by inhalation and U-Cr in different worker groups was analysed using regression analysis and found a strong association. Automatisation of Cr electroplating dipping explained lower exposure levels in platers. The use of personal protective equipment resulted in lower U-Cr levels in welding, bath plating and painting. An effect of wearing gloves was observed in machining. An effect of local exhaust ventilation and training was observed in welding. Regression analyses showed that in platers, exposure to air level of 5 µg/m3 corresponds to U-Cr level of 7 µg/g creatinine. In welders, the same inhalation exposure resulted in lower U-Cr levels reflecting toxicokinetic differences of different chromium species.

Changes in subchondral bone structure and mechanical properties do not substantially affect cartilage mechanical responses - A finite element study.

Subchondral bone structure has been observed to change in osteoarthritis (OA). However, it remains unclear how the early-stage OA changes affect the mechanics (stresses and strains) of the osteochondral unit. In this study, we aim to characterize the effect of subchondral bone structure and mechanical properties on the osteochondral unit mechanics. A 3-D finite element model of the osteochondral unit was constructed based on a rabbit femoral condyle µCT data and subjected to creep loading in indentation. Trabecular bone volume fraction, subchondral bone plate thickness, and equilibrium modulus were varied (including experimentally observed changes in early OA) to characterize the effect of these parameters on the osteochondral unit mechanics. At the end of the creep phase, the maximum principal strain at the bone surface of the cartilage-bone interface was decreased by 50% when the trabecular bone volume fraction was reduced from 48% to 28%. The maximum principal stress at the same location was decreased by 36% when plate thickness was reduced by 100 µm (-31%). In cartilage, small changes in the mechanics were seen near the cartilage-bone interface with a considerably thinner (-31%) plate. The changes in trabecular bone volume fraction, subchondral bone thickness and plate equilibrium modulus did not substantially affect the cartilage mechanics. Our results suggest that experimentally observed changes that occur in the subchondral bone structure in early OA have a minimal effect on cartilage mechanics under creep indentation loading; clear changes in the cartilage mechanics were seen only with an unrealistically soft subchondral bone plate.

HBM4EU chromates study - Overall results and recommendations for the biomonitoring of occupational exposure to hexavalent chromium.

Exposure to hexavalent chromium [Cr(VI)] may occur in several occupational activities, e.g., welding, Cr(VI) electroplating and other surface treatment processes. The aim of this study was to provide EU relevant data on occupational Cr(VI) exposure to support the regulatory risk assessment and decision-making. In addition, the capability and validity of different biomarkers for the assessment of Cr(VI) exposure were evaluated. The study involved nine European countries and involved 399 workers in different industry sectors with exposures to Cr(VI) such as welding, bath plating, applying or removing paint and other tasks. We also studied 203 controls to establish a background in workers with no direct exposure to Cr(VI). We applied a cross-sectional study design and used chromium in urine as the primary biomonitoring method for Cr(VI) exposure. Additionally, we studied the use of red blood cells (RBC) and exhaled breath condensate (EBC) for biomonitoring of exposure to Cr(VI). Personal measurements were used to study exposure to inhalable and respirable Cr(VI) by personal air sampling. Dermal exposure was studied by taking hand wipe samples. The highest internal exposures were observed in the use of Cr(VI) in electrolytic bath plating. In stainless steel welding the internal Cr exposure was clearly lower when compared to plating activities. We observed a high correlation between chromium urinary levels and air Cr(VI) or dermal total Cr exposure. Urinary chromium showed its value as a first approach for the assessment of total, internal exposure. Correlations between urinary chromium and Cr(VI) in EBC and Cr in RBC were low, probably due to differences in kinetics and indicating that these biomonitoring approaches may not be interchangeable but rather complementary. This study showed that occupational biomonitoring studies can be conducted successfully by multi-national collaboration and provide relevant information to support policy actions aiming to reduce occupational exposure to chemicals.

HBM4EU Occupational Biomonitoring Study on e-Waste-Study Protocol.

Workers involved in the processing of electronic waste (e-waste) are potentially exposed to toxic chemicals. If exposure occurs, this may result in uptake and potential adverse health effects. Thus, exposure surveillance is an important requirement for health risk management and prevention of occupational disease. Human biomonitoring by measurement of specific biomarkers in body fluids is considered as an effective method of exposure surveillance. The aim of this study is to investigate the internal exposure of workers processing e-waste using a human biomonitoring approach, which will stimulate improved work practices and contribute to raising awareness of potential hazards. This exploratory study in occupational exposures in e-waste processing is part of the European Human Biomonitoring Initiative (HBM4EU). Here we present a study protocol using a cross sectional survey design to study worker's exposures and compare these to the exposure of subjects preferably employed in the same company but with no known exposure to industrial recycling of e-waste. The present study protocol will be applied in six to eight European countries to ensure standardised data collection. The target population size is 300 exposed and 150 controls. Biomarkers of exposure for the following chemicals will be used: chromium, cadmium and lead in blood and urine; brominated flame retardants and polychlorobiphenyls in blood; mercury, organophosphate flame retardants and phthalates in urine, and chromium, cadmium, lead and mercury in hair. In addition, the following effect biomarkers will be studied: micronuclei, epigenetic, oxidative stress, inflammatory markers and telomere length in blood and metabolomics in urine. Occupational hygiene sampling methods (airborne and settled dust, silicon wristbands and handwipes) and contextual information will be collected to facilitate the interpretation of the biomarker results and discuss exposure mitigating interventions to further reduce exposures if needed. This study protocol can be adapted to future European-wide occupational studies.

Hexagonal arrays of plasmonic gold nanopyramids on flexible substrates for surface-enhanced Raman scattering.

Surface-enhanced Raman spectroscopy (SERS) with pyramidal gold nanostructures increases the signal of Raman active analytes, since hotspots form at the edges and tip of a nanopyramid under illumination. 2D hexagonal arrays of pyramidal nanostructures with a quadratic base are fabricated through cost-effective nanosphere lithography and transferred onto elastomeric polydimethylsiloxane. By making use of the {111} crystal plane of a silicon (100) wafer, an inverted pyramidal array is etched, which serves as the complementary negative for the gold nanostructures. Either a continuous gold thin-film with protruding pyramids or separate isolated nanopyramids are produced. Three basic fabrication strategies are presented. The SERS enhancement is verified by Raman mapping of 4-mercaptobenzoic acid (4-MBA) molecules. Fabrication on a flexible substrate paves the way for future applications on curved surfaces orin situtunable resonances.

Biomonitoring of occupational exposure to bisphenol A, bisphenol S and bisphenol F: A systematic review.

Bisphenol A (BPA) and its substitutes bisphenol S (BPS) and bisphenol F (BPF) are endocrine disrupting chemicals widely used in the production of polycarbonate plastics, epoxy resins and thermal papers. The aim of the review was to identify occupational studies using human biomonitoring (HBM) as a tool for bisphenol exposure assessment and to characterize research gaps on the topic as part of the HBM4EU project. Hence, a systematic literature search using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology was conducted for articles published between 2000 and 27th March 2020 across three databases (PubMed, Scopus and Web of Science). Thirty studies on the occupational HBM of BPA met the inclusion criteria. Regarding BPS and BPF, only 4 and 2 publications were retrieved, respectively. Fifty-seven percent (57%) of the studies selected for BPA were conducted in Asia whereas half of BPS and BPF studies were undertaken in Europe. Studies on BPA in plastic and epoxy resin sectors were infrequent in Europe while Asian data showed higher exposure when the substance is employed as raw material. The main data on BPS were among cashiers while BPF data were available from incinerator workers. Several research gaps have been identified: (i) shortage of HBM studies on occupational exposure, especially to BPS and BPF; (ii) different methodological designs making suitable comparisons between studies difficult; and (iii) only few studies conducted on the industrial applications of bisphenols outside Asia. This review highlights the lack of recent occupational HBM studies on bisphenols and the need for a harmonized approach to acquire reliable data. Considering the increasing replacement of BPA by BPS and BPF, it is of relevance to evaluate the exposure to these substances and the impact of the available risk management measures on workers exposure and possible health risk.

HBM4EU chromates study - Reflection and lessons learnt from designing and undertaking a collaborative European biomonitoring study on occupational exposure to hexavalent chromium.

The EU human biomonitoring initiative, HBM4EU, aims to co-ordinate and advance human biomonitoring (HBM) across Europe. As part of HBM4EU, we presented a protocol for a multicentre study to characterize occupational exposure to hexavalent chromium (Cr(VI)) in nine European countries (HBM4EU chromates study). This study intended to collect data on current occupational exposure and to test new indicators for chromium (Cr) biomonitoring (Cr(VI) in exhaled breath condensate and Cr in red blood cells), in addition to traditional urinary total Cr analyses. Also, data from occupational hygiene samples and biomarkers of early biological effects, including genetic and epigenetic effects, was obtained, complementing the biomonitoring information. Data collection and analysis was completed, with the project findings being made separately available. As HBM4EU prepares to embark on further European wide biomonitoring studies, we considered it important to reflect on the experiences gained through our harmonised approach. Several practical aspects are highlighted for improvement in future studies, e.g., more thorough/earlier training on the implementation of standard operating procedures for field researchers, training on the use of the data entry template, as well as improved company communications. The HBM4EU chromates study team considered that the study had successfully demonstrated the feasibility of conducting a harmonised multicentre investigation able to achieve the research aims and objectives. This was largely attributable to the engaged multidisciplinary network, committed to deliver clearly understood goals. Such networks take time and investment to develop, but are priceless in terms of their ability to deliver and facilitate knowledge sharing and collaboration.

Biomonitoring of occupational exposure to phthalates: A systematic review.

INTRODUCTION: Phthalates, a group of ubiquitous industrial chemicals, have been widely used in occupational settings, mainly as plasticizers in a variety of applications. Occupational exposure to different phthalates has been studied in several occupational settings using human biomonitoring (HBM). AIM: To provide a comprehensive review of the available literature on occupational exposure to phthalates assessed using HBM and to determine future data needs on the topic as part of the HBM4EU project. METHODS: A systematic search was carried out in the databases of Pubmed, Scopus, and Web of Science for articles published between 2000 and September 4, 2019 using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A total of 22 studies on the occupational HBM of phthalates was considered suitable for review. RESULTS AND DISCUSSION: Among the reviewed studies, 19 (86%) focused on DEHP, an old phthalate that is now subject to authorization and planned to be restricted in the EU. Concentrations of MEHHP, one of its metabolites, varied up to 13-fold between studies and across sectors when comparing extreme geometric means, ranging from 11.6 (similar to the general populations) to 151 µg/g creatinine. Only 2 studies focused on newer phthalates such as DiNP and DPHP. Concerning the geographical distribution, 10 studies were performed in Europe (including 6 in Slovakia), 8 in Asia, and 4 in North America, but this distribution is not a good reflection of phthalate production and usage levels worldwide. Most HBM studies were performed in the context of PVC product manufacturing. Future studies should focus on: i) a more uniform approach to sampling timing to facilitate comparisons between studies; ii) newer phthalates; and iii) old phthalates in waste management or recycling. CONCLUSION: Our findings highlight the lack of recent occupational HBM studies on both old and new phthalate exposure in European countries and the need for a harmonized approach. Considering the important policy actions taken in Europe regarding phthalates, it seems relevant to evaluate the impact of these actions on exposure levels and health risks for workers.

Non-occupational exposure to phthalates in Finland.

The aim of this study was to assess phthalate exposure of non-occupationally exposed working aged population in Finland. Studied phthalates included diethyl phthalate (DEP), di-n-butyl phthalate (DnBP), diisobutyl phthalate (DiBP), benzyl butyl phthalate (BzBP), dicyclohexyl phthalate (DCHP), di(2-ethylhexyl) phthalate (DEHP), diisononyl phthalate (DiNP), diisodecyl phthalate (DiDP), di(2-propylheptyl) phthalate (DPHP), and di-n-octyl phthalate (DnOP). Sample collection campaign took place in 2015. Metabolites of DEP, DnBP and DiBP were detected in all the first morning void urine samples of the non-occupationally exposed volunteers (n = 60; 42 women and 18 men; aged 25-63). Metabolite of BBP and secondary metabolites of DEHP and DiNP were detected in >90% of the samples. MCHP (1.7%), MEHP (18.3%), cx-MiNP (8.3%) and MnOP (1.7%) were less frequently detected. MiNP and OH-MPHP were not detected in any of the urine samples. The observed levels were mostly comparable to the levels published in the adult population in Europe and the US. One notable difference was the observed higher exposure of the Finnish study population to DnBP in comparison to the German, Austrian, Norwegian and US populations. The levels of individual phthalates did not often correlate very well with each other. In most cases, higher exposure to phthalates was seen in females in comparison to males, which is in accordance with other studies. The urinary levels were compared to the biomonitoring equivalents (BEs), which were calculated on the basis of published DNELs (derived no-effect levels). The P95 levels of individual phthalates remained below the respective BEs, the highest risk characterization ratio (RCR) being 0.88 for DnBP and the second highest 0.34 for DiBP. For other phthalates, the RCRs were below 0.2. Using the P95 levels, combined exposure to DnBP, DiBP, DEHP and BBP resulted in risk characterization ratio exceeding 1. This suggests a need to limit the exposure to these phthalates.