Scalable synthesis of a biocompatible, transparent and superparamagnetic photoresist for microdevice fabrication.

The functionalization of photoresists with colloids has enabled the development of novel active and passive components for microfabricated devices. Incorporation of colloidal particles often results in undesirable reductions in photolithographic fidelity and device transparency. We present a novel photoresist composite incorporating poly(methyl methacrylate-co-methacrylic acid) (PMMA/MMA), the epoxy resin 1002F and colloidal maghemite nanoparticles to produce a stable, transparent and biocompatible photoresist. The composite photoresist was prepared in a scalable fashion in batches up to 1 kg with the particles remaining dispersed during room-temperature storage for at least 6 months. Following photolithography to form films, the nanoparticle size remained well below that of visible-light wavelengths as demonstrated by electron microscopy. Structures fabricated from the photoresist by conventional photolithography displayed aspect ratios greater than ten. When grown on the photoresist, the metabolic rate of HeLa cells was unchanged relative to cells grown on glass. Primary murine mesenchymal stem cells also displayed a normal morphology on the resist surface. The ability to manipulate microstructures formed from the composite was demonstrated by magnetically collecting clonal colonies of HeLa cells from a micropallet array. The transparency, biocompatibility, scalable synthesis and superparamagnetic properties of the novel composite address key limitations of existing magnetic composites.

Spatial control of cellular measurements with the laser micropipet.

Continued progress in understanding cellular physiology requires new strategies for biochemical measurements in solitary cells, multiple cells, and subcompartments of cells. Large spatial gradients in the concentrations of molecules and presumably the activities of enzymes can occur in cells. Consequently, there is a critical need for measurement techniques for mammalian cells with control over the numbers or regions of cells interrogated. In the present work, we developed a strategy to rapidly load the cytoplasmic contents of either multiple cells or a subregion of a single cell into a capillary. A single, focused pulse from a laser created a mechanical shock wave which disrupted a group of cells or a portion of a cell in the path of the shock wave. Simultaneously, the cytoplasm was loaded into a capillary for electrophoretic separation. The size of the region of cellular disruption (and therefore the volume of cytoplasm collected) was controlled by the amount of energy in the laser pulse. Higher energies could be used to sample groups of cells while much lower energies could be utilized to selectively sample the tip of a neuronal process. The feasibility of performing measurements on subcellular compartments was also demonstrated by targeting reporter molecules to these compartments. A reporter localized to the nucleus was detected on the electropherogram following laser-mediated disruption of the cell and the nucleus. Finally, we demonstrate that this method terminated cellular reactions with sufficient rapidity that cellular membrane repair mechanisms were not activated during cytoplasmic collection. The combined ability to preselect a spatial region of a cell or cells and to rapidly load that region into a capillary will greatly enhance the utility of CE in the biochemical analysis of cells.

Improved capillary electrophoresis conditions for the separation of kinase substrates by the laser micropipet system.

Phosphorylated and nonphosphorylated forms of peptide substrates for protein kinase C (PKC) and calcium-calmodulin activated kinase II (CamKII) were separated by capillary zone electrophoresis. Electrophoresis of the peptide substrates and products in biologic buffer solutions in uncoated capillaries yielded asymmetric analyte peaks with substantial peak tailing. Some of the peptides also exhibited broad peaks with unstable migration times. To improve the electrophoretic separation of the peptides, several strategies were implemented: extensive washing of the capillary with a base, adding betaine to the electrophoretic buffer, and coating the capillaries with polydimethylacrylamide (PDMA). Prolonged rinsing of the capillaries with a base substantially improved the migration time reproducibility and decreased peak tailing. Addition of betaine to the electrophoretic buffer enhanced both the migration time stability as well as the theoretical plate numbers of the peaks. Finally PDMA-coated capillaries brought about significant improvements in the resolving power of the separations. These modifications all utilized an electrophoretic buffer that was compatible with a living biologic cell. Consequently they should be adaptable for the new capillary electrophoresis-based methods to measure kinase activation in single cells.

Measurement of kinase activation in single mammalian cells.

We demonstrate a new method for the simultaneous measurement of the activation of key regulatory enzymes within single cells. To illustrate the capabilities of the technique, the activation of protein kinase C (PKC), protein kinase A (PKA), calcium-calmodulin activated kinase II (CamKII), and cdc2 protein kinase (cdc2K) was measured in response to both pharmacological or physiological stimuli. This assay strategy should be applicable to a broad range of intracellular enzymes, including phosphatases, proteases, nucleases, and other kinases.

Localized measurement of kinase activation in oocytes of Xenopus laevis.

We have combined a rapid cytoplasmic sampling technique with capillary electrophoresis to measure the activation of protein kinase C (PKC) in a small region (approximately 60 microm) of a Xenopus oocyte. The phosphorylation of a fluorescent PKC substrate was measured following addition of a pharmacological or physiological stimulus to an oocyte. When substrates for cdc2 kinase (cdc2K), PKC, and protein kinase A (PKA) were comicroinjected into an oocyte, all three substrates could be identified on the electropherogram after cytoplasmic sampling. With this new method, it should be possible to measure simultaneously the activation of multiple different kinases in a single cell, enabling the quantitative dissection of signal transduction pathways.

Laser-micropipet combination for single-cell analysis.

Due to its potential for exquisite mass detection limits and resolving power, capillary electrophoresis is used for biochemical measurements on single cells; however, accurate measurements of many physiological parameters require sampling strategies that are considerably faster than those presently available. We have developed a laser-based technique to lyse single, adherent, mammalian cells on millisecond time scales. The cellular contents are then introduced into a capillary where electrophoretic separation and detection are performed. Improved temporal resolution of biological measurements results from the extremely rapid lysis made possible by this method. Additionally, the cell is not perturbed by mechanical or electrical stresses prior to sampling. Such disturbances can alter cellular physiology, resulting in inaccurate measurements. The fast cell lysis, the absence of cellular stresses prior to lysis, and the application to adherent mammalian cells are significant refinements to CE-based measurements on single cells. With this laser-micropipet combination, it will be possible to measure the intracellular concentration of molecules that change on subsecond to second time scales, for example, substrates of many cellular enzymes.

The physiologic concentration of inositol 1,4,5-trisphosphate in the oocytes of Xenopus laevis.

To measure the concentration of inositol 1,4,5-trisphosphate ([IP3]) in small regions of single Xenopus oocytes, a biological detector cell was combined with capillary electrophoresis. This method is 10, 000 times more sensitive than all existing assays enabling subcellular measurement of [IP3] in Xenopus oocytes. Upon addition of lysophosphatidic acid to an oocyte, [IP3] increased from 40 to 650 nM within 2 min. IP3 concentrations as high as 1.8 microM were measured after activation with lysophosphatidic acid, suggesting that the physiologic concentration of IP3 ranges from the tens of nanomolar to a few micromolar in Xenopus oocytes. Since the IP3 receptor in Xenopus oocytes is nearly identical to the type I receptor of mammalian cells, the range of [IP3] in most mammalian cells is likely to be similar to that in the oocyte. By selecting or engineering the appropriate detector cell, this strategy should be applicable to cyclic adenosine diphosphate ribose and nicotinic acid adenine dinucleotide phosphate, and to the discovery of new Ca2+-releasing second messengers.

Metabolism of inositol 1,4,5-trisphosphate and inositol 1,3,4,5-tetrakisphosphate by the oocytes of Xenopus laevis.

The pathway and kinetics of inositol 1,4,5-trisphosphate (IP3) metabolism were measured in Xenopus laevis oocytes and cytoplasmic extracts of oocytes. Degradation of microinjected IP3 in intact oocytes was similar to that in the extracts containing comparable concentrations of IP3 ([IP3]). The rate and route of metabolism of IP3 depended on the [IP3] and the intracellular free Ca2+ concentration ([Ca2+]). At low [IP3] (100 nM) and high [Ca2+] (>/=1 microM), IP3 was metabolized predominantly by inositol 1,4, 5-trisphosphate 3-kinase (3-kinase) with a half-life of 60 s. As the [IP3] was increased, inositol polyphosphate 5-phosphatase (5-phosphatase) degraded progressively more IP3. At a [IP3] of 8 microM or greater, the dephosphorylation of IP3 was the dominant mode of IP3 removal irrespective of the [Ca2+]. At low [IP3] and low [Ca2+] (both