ABSTRACT
It is a standard procedure in many countries that response to a nuclear or radiological accident or incident would involve mobile aerial- or ground-based survey with highly sensitive gamma-ray detectors to map the distribution of radioactivity. There may however arise situations in which ground- or air-based detectors are not able to access an area to survey for radioactive materials, therefore technologies and techniques that can estimate the position and activity of radioactive materials from a distance are under development. Tomographic reconstruction methods, well-known in medical physics, permit the reconstruction of an N-dimensional map or image, from a number of N-1-dimensional cross-sectional images, or back-projections. We are investigating a tomographic reconstruction method to reconstruct the radioactivity distribution within a restricted-access zone using measurements from a Compton gamma imager placed at several locations around the perimeter of the zone. In this work an extended source of La-140 with an activity of 35 GBq was deposited within a 500 m by 500 m zone that was surveyed from the perimeter at six locations using a Silicon photomultiplier-based Compton Telescope for Safety and Security (SCoTSS) gamma imager. The reconstructed Compton images from multiple viewpoints were then projected back into the zone to reconstruct the distribution of La-140 within it. This tomographic method reconstructed high intensity along the known location of the La-140 source, suggesting that the method is able to localize the radioactive material. A simple fit to measured counts using a point-source approximation of the source distribution yielded a strength estimate of (7 ± 2) GBq at time of deposition, a reasonable result given the presence of soil and snow attenuation. Our method provides an expedient estimate of the distribution of radioactivity using tomographic techniques. It may be used to inform decisions made on the scene in urgent situations where the distribution of radioactivity must be reconstructed from a distance.
Subject(s)
Algorithms , Radiation Monitoring , Monte Carlo MethodABSTRACT
In response to the Fukushima nuclear reactor accident, on March 20th, 2011, Natural Resources Canada conducted aerial radiation surveys over water just off the west coast of Vancouver Island. Dose-rate levels were found to be consistent with background radiation, however a clear signal due to (133)Xe was observed. Methods to extract (133)Xe count rates from the measured spectra, and to determine the corresponding (133)Xe activity concentration, were developed. The measurements indicate that (133)Xe concentrations on average lie in the range of 30-70 Bq/m(3).
