Biodiesel production and exploring properties of Datura stramonium L. oil with its optimization using combined approaches-Taguchi, grey relational analysis, and response surface methodology.

Biodiesel production through the synthesis of Datura stramonium L. oil is studied to explore the most efficient approaches to suggest an alternate feedstock for biodiesel production. The main objective of this work is to optimize the process variables of biodiesel synthesis by using some statistical approach (Taguchi method, grey relational analysis (GRA), and response surface methodology (RSM) analyzing three parameters, i.e., alcohol-to-oil molar ratio, catalyst (NaOH) concentration, and process temperature for achieving maximum biodiesel derived from Datura stramonium L. oil. The transesterification process is applied by using an ultrasonic-assisted technique. Grey relational analysis (GRA) was successfully applied with the Taguchi method resulting in the optimum combination of A2B1C1. Based on the findings, the best operating conditions for transesterifying are attained with the RSM approach consisting of a 5.697:1 molar ratio (level 2), 0.3 (wt.%) NaOH concentration (level 1), and 70 °C process temperature (level 1). With a value of 87.02%, these ideal operating conditions produce the maximum yield as compared to grey relational analysis (GRA) yields 83.99%. The obtained results have been verified through the characterization of oil and biodiesel as well. Also, the fuel qualities of DSL biodiesel were identified and assessed. DSL oil was found 137.6 degrees of unsaturation during fatty acid profile analysis. DSL biodiesel was found the best kinematic viscosity (4.2 mm2/s) and acid value (0.49) when compared to Karanja and palm biodiesel. D. stramonium L. was recognized as a suitable species for biodiesel feedstock according to the findings.

Cellulose-based bioabsorbable and antibiotic coated surgical staple with bioinspired design for efficient wound closure.

The quest to design a flawless wound closure system began long ago and is still underway. Introducing surgical staples is one of the most significant breakthroughs in this effort. In this work, we developed a biodegradable surgical staple to meet the optimal wound closure system criteria and other clinical requirements, such as radiography compatibility and secondary infection prevention. To meet these requirements, a naturally derived cellulose acetate (CA) fiber-reinforced poly-(l-lactic acid) (PLLA) composite was synthesized, and its physicochemical properties were determined using several characterizations such as Fourier-transform infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC) and Universal testing machine (UTM), etc. Taking cues from the Mantis's foreleg, a novel staple design was implemented and verified using Finite Element Analysis (FEA). The CA + PLLA staples were fabricated using melt-casted/3D-printing processes. The staples exhibited excellent biodegradation in both wound and physiological microenvironments with sufficient puncturing strength and later closed the wound's edges mechanically. In addition, the CA + PLLA staples also exhibit metal-like ductility properties to withstand horizontal skin tensions during the healing process. Further, the staples are coated with an antibiotic to combat infections effectively to provide better healing.

Comparison between all-on-four and all-on-six treatment concepts on stress distribution for full-mouth rehabilitation using three-dimensional finite element analysis: A biomechanical study.

Purpose: The current study intended to provide a comparison of biomechanical behaviors of two different treatment concepts for full-mouth rehabilitation with dental implants placed according to the "All-on-four" concept and "All-on-six" concept with analysis of the stress patterns of the implant support system using three-dimensional finite element analysis (FEA). Materials and Methods: The edentulous mandible was treated with two different implant designs. "All-on-Four" implant placement concept was used in Model 1 with two central axial implants and two distally tilted implants at 17° and in Model 2, "All-on-Six" concept was applied with six vertically placed implants. Individual vertical and horizontal load of 100 N and oblique load of 141 N at 45° was applied to all implants. To evaluate and compare the results in terms of maximum principal stress, we used FEA. Results: All-on-six showed smaller maximum principal stress values on the cortical bone and implants. However, maximum principal stress values obtained on trabecular bone was smaller in the All-on-four design for vertical and horizontal loading conditions. Conclusions: The All-on-six approach showed more favorable biomechanical behavior.

Molecular basis of differential HLA class I-restricted T cell recognition of a highly networked HIV peptide.

Cytotoxic-T-lymphocyte (CTL) mediated control of HIV-1 is enhanced by targeting highly networked epitopes in complex with human-leukocyte-antigen-class-I (HLA-I). However, the extent to which the presenting HLA allele contributes to this process is unknown. Here we examine the CTL response to QW9, a highly networked epitope presented by the disease-protective HLA-B57 and disease-neutral HLA-B53. Despite robust targeting of QW9 in persons expressing either allele, T cell receptor (TCR) cross-recognition of the naturally occurring variant QW9_S3T is consistently reduced when presented by HLA-B53 but not by HLA-B57. Crystal structures show substantial conformational changes from QW9-HLA to QW9_S3T-HLA by both alleles. The TCR-QW9-B53 ternary complex structure manifests how the QW9-B53 can elicit effective CTLs and suggests sterically hindered cross-recognition by QW9_S3T-B53. We observe populations of cross-reactive TCRs for B57, but not B53 and also find greater peptide-HLA stability for B57 in comparison to B53. These data demonstrate differential impacts of HLAs on TCR cross-recognition and antigen presentation of a naturally arising variant, with important implications for vaccine design.

Evaluation and comparison of stress distribution around periodontally compromised mobile teeth splinted with different materials: Three-dimensional finite element analysis.

BACKGROUND: Progressive attachment loss around the teeth because of periodontal disease can result in increased tooth mobility. This adversely affects patient's comfort, function, and esthetics. Periodontal splinting helps in accomplishing stability by redistributing the functional and parafunctional forces. There are various materials that have been used for periodontal splinting. Fiber-reinforced composite, composite resin, and metal-reinforced composite are often used as splinting materials for periodontally compromised teeth. In our study, a comparison was done among these materials for their ability to distribute the stresses at different bone levels in mobile lower incisors splinted together with canines. MATERIALS AND METHODS: Five patients of age group 25-50 years with Grade 2 and 3 mobile incisors having 40% or more bone loss and firm canines with optimal bone support were selected. From the computed tomography scan of each patient, three models were developed demonstrating splinting of mandibular incisors and canines with metal-reinforced composite, fiber-reinforced composite, and composite resin. So in total, 15 models were developed and each one of them was subjected to vertical and transverse loads of 150 N. Pattern of stress distribution was observed in these models using three-dimensional finite element analysis. RESULTS: After splinting, the stress on the canine increased when bone levels around incisors decreased while stress on incisors reduced. CONCLUSION: Tested splinting materials were successful in stress distribution, and metal-reinforced composite was found to be better than the other splinting materials.

Prevalence of musculoskeletal disorders among Indian railway sahayaks.

Railway sahayak or also known as coolie is one of the oldest occupations in India. This occupational group is continuously subjected to various musculoskeletal problems due to repetitive load exertion in unnatural postures. The present research aims to examine the prevalence of musculoskeletal disorders (MSDs) among Indian railway sahayaks. A cross-sectional study has been conducted on a sample of 51 male sahayaks. With a modified Nordic questionnaire, data were collected on their demographics, work, and musculoskeletal pain history. Electromyography (EMG) of the upper trapezius muscle of selected 12 healthy sahayaks having no history of neck-shoulder complaints were analyzed under different load lifting and carrying conditions. Additionally, ergonomic risk levels were recorded using Rapid Entire Body Assessment method. The questionnaire revealed that for the past 1 year prevalence, the most affected body regions of railway sahayaks were neck (47%), shoulder (51%), lower back (43%), and knee (47%). The association between age group and MSDs in different body regions were found significant (p = 0.012 for neck, p = 0.017 for shoulder, etc.). Work experience also had a significant relation to the MSDs in different body regions (p = 0.013 for shoulder,p = 0.023 for calf, etc.). Analysis of variance reveals high significance level between EMG values and tasks performed by the sahayaks. In conclusion, railway sahayaks were found to have high rate of MSDs which may be associated with lifting/carrying heavy loads in awkward postures. Ergonomic interventions must be implemented to reduce the risk level on this group of workers.

Possible Vascular Injury Due to Screw Eccentricity in Minimally Invasive Total Hip Arthroplasty.

BACKGROUND: Vascular injury during minimally invasive total hip arthroplasty (THA) is uncommon, yet a well-recognized and serious issue. It emerges because of non-visibility of vascular structures proximal to the pelvic bone during reaming, drilling holes, and fixing of screws. Numerous studies have found that screw fixation during cementless THA is beneficial for the initial stability of cup; yet, no anatomical guidelines support angular eccentric screw fixation. MATERIALS AND METHODS: In this study, we obtained the pelvic arterial-phase computed tomographic data of thirty eight humans and reconstructed the three-dimensional models of osseous and vessel structures. We performed the surgical simulation to fix these structures with cementless cups and screws with angular eccentricities. RESULTS: The effect of screw eccentricities (angular eccentricities of ±17° and ±34°) on the vascular injury was determined. Measurement between screw and adjoining vessels was performed and analyzed statistically to ascertain a comparative risk study for blood vessels that are not visible during surgery. CONCLUSION: Authors similarly discussed the significant absence of appreciation of quadrant systems proposed by Wasielewski et al. on eccentric screws. Adjustment of quadrant systems provided by Wasielewski et al. is required for acetabular implants with eccentric holes for fixation of acetabular screws.