Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 15 de 15
Filter
Add more filters










Publication year range
1.
Front Chem ; 11: 1287528, 2023.
Article in English | MEDLINE | ID: mdl-38025056

ABSTRACT

High-refractive index plastics are useful materials due to their optical properties, ease of processing, and low-costs compared to their inorganic counterparts. Catalytic carbon disulfide (CS2) copolymerization with epoxides is one method for producing low-cost high refractive index polymers. The reaction is accompanied by an oxygen-sulfur exchange reaction which produces irregular microstructures in the repeating units. In this study, metal salen catalysts were investigated with different metal centers (Al, Cr, Co) and salen ligand electronics, sterics, backbones, and co-catalyst in the copolymerization of CS2 with propylene oxide (PO) and cyclohexene oxide (CHO). The results reveal the essential nature of Cr metal centers on reactivity and the backbone geometry on monomer selectivity. There were no significant impacts on the O-S exchange reaction when ligand design changed, however PO and CHO/CS2 copolymers yield different monothiocarbonate microstructures. Additionally, the effects of microstructure on optical and thermal properties were investigated using spectroscopic ellipsometry and calorimetry, respectively. The CHO system produced high T g plastics (93°C) with high refractive indexes (n up to 1.64), modest absorbance (κ < 0.020), and Abbe numbers of 32.2 while PO yielded low T g adhesives (T g = 9°C) with high refractive indexes (n up to 1.73), low absorbance (κ < 0.005), and low Abbe numbers (V D = 19.1).

2.
ACS Appl Mater Interfaces ; 15(38): 45229-45238, 2023 Sep 27.
Article in English | MEDLINE | ID: mdl-37699412

ABSTRACT

Hollow melanosomes found in iridescent bird feathers, including violet-backed starlings and wild turkeys, enable the generation of diverse structural colors. It has been postulated that the high refractive index (RI) contrast between melanin (1.74) and air (1.0) results in brighter and more saturated colors. This has led to several studies that have synthesized hollow synthetic melanin nanoparticles and fabricated colloidal nanostructures to produce synthetic structural colors. However, these studies use hollow nanoparticles with thin shells (<20 nm), even though shell thicknesses as high as 100 nm have been observed in natural melanosomes. Here, we combine experimental and computational approaches to examine the influence of the varying polydopamine (PDA, synthetic melanin) shell thickness (0-100 nm) and core material on structural colors. Experimentally, a concomitant change in overall particle size and RI contrast makes it difficult to interpret the effect of a hollow or solid core on color. Thus, we utilize finite-difference time-domain (FDTD) simulations to uncover the effect of shell thickness and core on structural colors. Our FDTD results highlight that hollow particles with thin shells have substantially higher saturation than same-sized solid and core-shell particles. These results would benefit a wide range of applications including paints, coatings, and cosmetics.

3.
Sci Adv ; 9(21): eadf2859, 2023 May 26.
Article in English | MEDLINE | ID: mdl-37235651

ABSTRACT

Inspired by structural colors in avian species, various synthetic strategies have been developed to produce noniridescent, saturated colors using nanoparticle assemblies. Nanoparticle mixtures varying in particle chemistry and size have additional emergent properties that affect the color produced. For complex multicomponent systems, understanding the assembled structure and a robust optical modeling tool can empower scientists to identify structure-color relationships and fabricate designer materials with tailored color. Here, we demonstrate how we can reconstruct the assembled structure from small-angle scattering measurements using the computational reverse-engineering analysis for scattering experiments method and use the reconstructed structure in finite-difference time-domain calculations to predict color. We successfully, quantitatively predict experimentally observed color in mixtures containing strongly absorbing nanoparticles and demonstrate the influence of a single layer of segregated nanoparticles on color produced. The versatile computational approach that we present is useful for engineering synthetic materials with desired colors without laborious trial-and-error experiments.

4.
ACS Macro Lett ; 11(11): 1285-1290, 2022 11 15.
Article in English | MEDLINE | ID: mdl-36282218

ABSTRACT

We correlate the strength of interfacial interactions with the adhesive force necessary to separate a polymer from a surface. It is intuitive that interactions would influence adhesion and friction; however, challenges in the direct measurement of the interaction strength at interfaces have obscured the connection between these interactions and such phenomena. We overcome this by using interface-sensitive sum frequency generation spectroscopy to determine the strength of interfacial interactions between polymers and sapphire through a shift in vibrational frequency and compare this with mechanical adhesion tests. Our results indicate that spectroscopic shifts can be used to directly estimate adhesion, especially for polar materials. This work provides a framework to connect molecular interactions to interfacial properties, enabling the design and rapid screening of molecular architectures.


Subject(s)
Adhesives , Polymers , Humans , Surface Properties , Polymers/chemistry , Spectrum Analysis/methods , Vibration , Tissue Adhesions
5.
ACS Appl Mater Interfaces ; 13(34): 41084-41093, 2021 Sep 01.
Article in English | MEDLINE | ID: mdl-34415147

ABSTRACT

Silica aerogels are interesting porous materials with extremely low density and high surface area, making them advantageous for a number of aerospace and catalysis applications. Here, we report the preparation of polydopamine (PDA)-functionalized silica aerogels using an in situ coating method, wherein the dopamine monomer was allowed to diffuse through the underlying structure of the gels in the absence of any external base and polymerize on the surface of the gel. The use of a siloxane precursor with an amine functionality decorates the silica backbone, allowing for a superior PDA coating, as evident in the darker color of PDA-coated amine-functionalized silica gels than PDA-coated silica-only gels and the X-ray photoelectron spectroscopy results. Furthermore, by varying the coating time, a series of aerogels with increasing optical absorption are prepared. Analyses using Brunauer-Emmett-Teller, scanning electron microscopy, and pycnometry show that the in situ PDA coating does not affect the inherent properties of the silica aerogels as opposed to PDA coatings deposited using an external base. Aerogels coated for 12 h and 24 h offer a surface area of 614 ± 35 and 658 ± 15 m2/g along with a porosity of 92.6 ± 0.9 and 92.4 ± 0.7%, respectively, properties similar to the native silica aerogels. PDA-coated aerogels have the potential to serve as UV ray mitigating materials due to the tortuosity of the underlying structure and the unique chemical properties of the PDA coating.

6.
J R Soc Interface ; 18(179): 20210320, 2021 06.
Article in English | MEDLINE | ID: mdl-34129788

ABSTRACT

The spider major ampullate (MA) silk exhibits high tensile strength and extensibility and is typically a blend of MaSp1 and MaSp2 proteins with the latter comprising glycine-proline-glycine-glycine-X repeating motifs that promote extensibility and supercontraction. The MA silk from Darwin's bark spider (Caerostris darwini) is estimated to be two to three times tougher than the MA silk from other spider species. Previous research suggests that a unique MaSp4 protein incorporates proline into a novel glycine-proline-glycine-proline motif and may explain C. darwini MA silk's extraordinary toughness. However, no direct correlation has been made between the silk's molecular structure and its mechanical properties for C. darwini. Here, we correlate the relative protein secondary structure composition of MA silk from C. darwini and four other spider species with mechanical properties before and after supercontraction to understand the effect of the additional MaSp4 protein. Our results demonstrate that C. darwini MA silk possesses a unique protein composition with a lower ratio of helices (31%) and ß-sheets (20%) than other species. Before supercontraction, toughness, modulus and tensile strength correlate with percentages of ß-sheets, unordered or random coiled regions and ß-turns. However, after supercontraction, only modulus and strain at break correlate with percentages of ß-sheets and ß-turns. Our study highlights that additional information including crystal size and crystal and chain orientation is necessary to build a complete structure-property correlation model.


Subject(s)
Silk , Spiders , Animals , Plant Bark , Protein Structure, Secondary , Tensile Strength
7.
Sci Adv ; 7(21)2021 May.
Article in English | MEDLINE | ID: mdl-34138740

ABSTRACT

While it is generally accepted that van der Waals (vdW) forces govern gecko adhesion, several studies indicate contributions from non-vdW forces and highlight the importance of understanding the adhesive contact interface. Previous work hypothesized that the surface of gecko setae is hydrophobic, with nonpolar lipid tails exposed on the surface. However, direct experimental evidence supporting this hypothesis and its implications on the adhesion mechanism is lacking. Here, we investigate the sapphire-setae contact interface using interface-sensitive spectroscopy and provide direct evidence of the involvement of acid-base interactions between polar lipid headgroups exposed on the setal surface and sapphire. During detachment, a layer of unbound lipids is left as a footprint due to cohesive failure within the lipid layer, which, in turn, reduces wear to setae during high stress sliding. The absence of this lipid layer enhances adhesion, despite a small setal-substrate contact area. Our results show that gecko adhesion is not exclusively a vdW-based, residue-free system.

8.
Nanoscale ; 13(17): 8098-8106, 2021 May 07.
Article in English | MEDLINE | ID: mdl-33956918

ABSTRACT

A single layer of graphene when transferred to a solid substrate has the ability to screen or transmit interactions from the underlying substrate, which has direct consequences in applications of this 2D material to flexible electronics and sensors. Previous reports using a multitude of techniques present contradictory views on graphene's ability to screen or transmit van der Waals (vdW) and polar interactions. In the present study, we use interface-sensitive spectroscopy to demonstrate that a single layer graphene is opaque to hydrogen bonding interactions (a subset of acid-base interactions), answering a question that has remained unresolved for a decade. Similar frequency shifts of sapphire hydroxyl (OH) peak for graphene-coated sapphire in contact with air and polydimethylsiloxane (PDMS) demonstrate the insensitivity of sapphire OH to PDMS. The screening ability of graphene is also evident in the smaller magnitude of this frequency shift for graphene-coated sapphire in comparison to that for bare sapphire. The screening of acid-base interactions by a single layer graphene results in the significant reduction of adhesion hysteresis for PDMS lens on graphene-coated substrates (sapphire and silicon wafer, SiO2/Si) than bare substrates. Our results have implications in the use of PDMS stamps to transfer graphene to other substrates eliminating the need for a wet-transfer process.

9.
ACS Omega ; 6(51): 35514-35522, 2021 Dec 28.
Article in English | MEDLINE | ID: mdl-34984283

ABSTRACT

Melanin, a widespread pigment found in many taxa, is widely recognized for its high refractive index, ultraviolet (UV) protection, radical quenching ability, metal binding, and many other unique properties. The aforementioned characteristic traits make melanin a potential candidate for biomedical, separation, structural coloration, and space applications. However, the commercially available natural (sepia) and synthetic melanin are very expensive, limiting their use in various applications. Additionally, eumelanin has been the primary focus in most of these studies. In the present study, we demonstrate that melanin can be extracted from the pathogenic black knot fungus Apiosporina morbosa with a yield of ∼10% using the acid-base extraction method. The extracted melanin shows irregular morphology. Chemical characterization using X-ray photoelectron spectroscopy, infrared spectroscopy, and solid-state nuclear magnetic resonance spectroscopy reveals that the melanin derived from black knots is the less explored nitrogen-free allomelanin. Additionally, the extracted melanin shows broadband UV absorption typical of other types of melanin. Because of the wide availability and low cost of black knots and the invasive nature of the fungus, black knots can serve as an alternative green source for obtaining allomelanin at a low cost, which could stimulate its use as an UV light absorber and antioxidant in cosmetics and packaging industries.

10.
Biochemistry ; 59(37): 3508-3516, 2020 09 22.
Article in English | MEDLINE | ID: mdl-32844640

ABSTRACT

The bacterium Caulobacter crescentus is known to attach irreversibly to underwater surfaces by utilizing an adhesive structure called the holdfast, which exhibits the greatest known adhesive strength of any organism. The very small size of the holdfast (∼400 nm wide and ∼40 nm high) has made direct chemical analysis difficult, and its structure remains poorly understood. In this study, we employ spectroscopic techniques, including attenuated total reflection infrared spectroscopy (ATR-IR) and X-ray photoelectron spectroscopy, to probe holdfast chemistry. The data indicate the presence of a peptide signal within the holdfast polymer. By comparing the ATR-IR spectrum of the holdfast to peptidoglycan spectra from other bacterial species, we demonstrate the similarity of the holdfast chemistry to that of peptidoglycan, suggesting peptide cross-linking may play a role in holdfast architecture. To probe the molecular groups at the interface, surface-sensitive sum frequency generation spectroscopy was used to show that aromatic and hydroxyl groups related to this protein content at the adhesive interface could be playing a crucial role in adhesion. On the basis of these results, we propose a model of the holdfast architecture with similarities to the peptide cross-linking observed in the peptidoglycan polymer of the bacterial cell wall. These results not only provide information about the development of adhesives that could be based on holdfast chemical architecture but also reveal a potentially yet unexplored biosynthetic pathway in holdfast synthesis that has not yet been revealed by genetic approaches, thereby opening up a potentially new avenue of research in holdfast synthesis.


Subject(s)
Adhesins, Bacterial/metabolism , Bacterial Adhesion , Bacterial Proteins/chemistry , Carrier Proteins/chemistry , Caulobacter crescentus/physiology , Peptide Fragments/chemistry , Peptidoglycan/chemistry , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Carrier Proteins/genetics , Carrier Proteins/metabolism , Cross-Linking Reagents/chemistry , Spectrophotometry, Infrared
11.
Front Zool ; 16: 19, 2019.
Article in English | MEDLINE | ID: mdl-31210775

ABSTRACT

BACKGROUND: Mucus and mucus glands are important features of the amphibian cutis. In tree frogs, the mucus glands and their secretions are crucial components of the adhesive digital pads of these animals. Despite a variety of hypothesised functions of these components in tree frog attachment, the functional morphology of the digital mucus glands and the chemistry of the digital mucus are barely known. Here, we use an interdisciplinary comparative approach to analyse these components, and discuss their roles in tree frog attachment. RESULTS: Using synchrotron micro-computer-tomography, we discovered in the arboreal frog Hyla cinerea that the ventral digital mucus glands differ in their morphology from regular anuran mucus glands and form a subdermal gland cluster. We show the presence of this gland cluster also in several other-not exclusively arboreal-anuran families. Using cryo-histochemistry as well as infrared and sum frequency generation spectroscopy on the mucus of two arboreal (H. cinerea and Osteopilus septentrionalis) and of two terrestrial, non-climbing frog species (Pyxicephalus adspersus and Ceratophrys cranwelli), we find neutral and acidic polysaccharides, and indications for proteinaceous and lipid-like mucus components. The mucus chemistry varies only little between dorsal and ventral digital mucus in H. cinerea, ventral digital and abdominal mucus in H. cinerea and O. septentrionalis, and between the ventral abdominal mucus of all four studied species. CONCLUSIONS: The presence of a digital mucus gland cluster in various anuran families, as well as the absence of differences in the mucus chemistry between arboreal and non-arboreal frog species indicate an adaptation towards generic functional requirements as well as to attachment-related requirements. Overall, this study contributes to the understanding of the role of glands and their secretions in tree frog attachment and in bioadhesion in general, as well as the evolution of anurans.

12.
Phys Rev Lett ; 122(12): 128004, 2019 Mar 29.
Article in English | MEDLINE | ID: mdl-30978075

ABSTRACT

The friction between a liquid swollen soft elastomer and a solid surface depends on the state of a confined liquid. To measure the physical state of the confined liquid, an interface-sensitive sum frequency generation spectroscopy technique was used to probe the contact region. We find that during sliding (friction) and pull-off (adhesion) experiments of pentadecane-swollen poly(dimethyl siloxane) lenses submerged in linear alkane (pentadecane) on a sapphire substrate, crystallinelike ordering of the liquid occurs only at the contact line, where we anticipate the highest shear. This crystallinelike structure of pentadecane molecules is transient and shows Arrhenius temperature dependence with unusually long relaxation times (hundreds of seconds) and an activation energy (50 kJ/mole), which is twice that of the bulk pentadecane liquid, at temperatures that are 14-70 °C higher than the bulk melting temperature (T_{m}=9 °C). This unusual long-lived crystallinelike ordering may explain why these systems show higher friction coefficients (boundary lubrication) compared to values predicted using bulk viscosity of pentadecane (hydrodynamic lubrication).

13.
Phys Chem Chem Phys ; 21(5): 2513-2518, 2019 Jan 30.
Article in English | MEDLINE | ID: mdl-30656292

ABSTRACT

Quantification of interfacial composition and interfacial energy is essential for understanding prevalent phenomena such as purification and adhesion. However, for high-energy planar solid surfaces, traditional approaches for determining both parameters are inadequate. We take advantage of interface-sensitive spectroscopy to calculate the interfacial composition for acetone-chloroform, tetrahydrofuran-benzene, and N,N-dimethylformamide (DMF)-benzene mixtures. We calculate the differences in interfacial energy for the two components of each mixture from the adsorption isotherms and compare with that obtained from acid-base and dispersive interactions. The interfacial energy calculated using interfacial segregation agrees with the interfacial energy calculated by acid-base and dispersive interactions. The comparison illustrates how molecular interactions control macroscopic interfacial segregation. In all three mixtures, acid-base interactions dominate interfacial segregation. Comparing the two approaches for DMF-benzene mixtures leads to evidence of DMF dimerization in benzene. Using the present approach, the interfacial composition and interfacial energy can now be understood for interfacial behaviors including wetting and self-assembly.

14.
Nat Commun ; 9(1): 1890, 2018 05 22.
Article in English | MEDLINE | ID: mdl-29789602

ABSTRACT

Adhesion in humid environments is fundamentally challenging because of the presence of interfacial bound water. Spiders often hunt in wet habitats and overcome this challenge using sticky aggregate glue droplets whose adhesion is resistant to interfacial failure under humid conditions. The mechanism by which spider aggregate glue avoids interfacial failure in humid environments is still unknown. Here, we investigate the mechanism of aggregate glue adhesion by using interface-sensitive spectroscopy in conjunction with infrared spectroscopy. We demonstrate that glycoproteins act as primary binding agents at the interface. As humidity increases, we observe reversible changes in the interfacial secondary structure of glycoproteins. Surprisingly, we do not observe liquid-like water at the interface, even though liquid-like water increases inside the bulk with increasing humidity. We hypothesize that the hygroscopic compounds in aggregate glue sequester interfacial water. Using hygroscopic compounds to sequester interfacial water provides a novel design principle for developing water-resistant synthetic adhesives.

15.
ACS Nano ; 11(5): 4899-4906, 2017 05 23.
Article in English | MEDLINE | ID: mdl-28448717

ABSTRACT

The water/graphene interface has received considerable attention in the past decade due to its relevance in various potential applications including energy storage, sensing, desalination, and catalysis. Most of our knowledge about the interfacial water structure next to graphene stems from simulations, which use experimentally measured water contact angles (WCAs) on graphene (or graphite) to estimate the water-graphene interaction strength. However, the existence of a wide spectrum of reported WCAs on supported graphene and graphitic surfaces makes it difficult to interpret the water-graphene interactions. Here, we have used surface-sensitive infrared-visible sum frequency generation (SFG) spectroscopy to probe the interfacial water structure next to graphene supported on a sapphire substrate. In addition, the ice nucleation properties of graphene have been explored by performing in situ freezing experiments as graphitic surfaces are considered good ice nucleators. For graphene supported on sapphire, we observed a strong SFG peak associated with highly coordinated, ordered water next to graphene. Similar ordering was not detected next to bare sapphire, implying that the observed ordering of water molecules in the former case is a consequence of the presence of graphene. Our analysis indicates that graphene behaves like a hydrophobic (or negatively charged) surface, leading to enhanced ordering of water molecules. Although liquid water orders next to graphene, the ice formed is proton disordered. This research sheds light on water-graphene interactions relevant in optimizing the performance of graphene in various applications.

SELECTION OF CITATIONS
SEARCH DETAIL
...