ABSTRACT
This paper provides a path for the design of state-of-the-art fiber-optic delay lines for signal processing. The theoretical forms for various radio-frequency system performance metrics are derived for four modulation types: X- and Z-cut Mach-Zehnder modulators, a phase modulator with asymmetric Mach-Zehnder interferometer, and a polarization modulator with control waveplate and polarizing beam splitter. Each modulation type is considered to cover the current and future needs for ideal system designs. System gain, compression point, and third-order output intercept point are derived from the transfer matrices for each modulation type. A discussion of optical amplifier placement and fiber-effect mitigation is offered. The paper concludes by detailing two high-performance delay lines, built for unique applications, that exhibit performance levels an order of magnitude better than commercial delay lines. This paper should serve as a guide to maximizing the performance of future systems and offer a look into current and future research being done to further improve photonics technologies.
ABSTRACT
A new technique to cancel photodiode-induced even-order distortion in microwave photonic links is demonstrated. A single Mach-Zehnder modulator, biased slightly away from the quadrature point, is shown to suppress photodiode second-order intermodulation distortion in excess of 40 dB without affecting the fundamental power. The technique is theoretically described with supporting experimental results.
Subject(s)
Artifacts , Interferometry/instrumentation , Models, Theoretical , Photometry/instrumentation , Semiconductors , Telecommunications/instrumentation , Computer Simulation , Equipment Design , Equipment Failure Analysis , Light , Linear Models , Scattering, RadiationABSTRACT
We report what we believe to be record performance for a high average power Yb:YAG cryogenic laser system with sustained output power. In a CW oscillator-single-pass amplifier configuration, 963 W of output power was measured. In a second configuration, a two amplifier Yb:YAG cryogenic system was driven with a fiber laser picosecond ultrafast oscillator at a 50 MHz repetition rate, double-passed through the first amplifier and single-passed through the second, resulting in 758 W of average power output. Pulses exiting the system have a FWHM pulsewidth of 12.4 ps, an energy/pulse of 15.2 µJ, and a peak power of 1.23 MW. Both systems are force convection-cooled with liquid nitrogen and have been demonstrated to run reliably over long time periods.
ABSTRACT
We report the demonstration of a heat-fraction-limited CW Yb:YAG laser operating near 77 K with output at 1029 nm, pumped with a diffraction-limited room-temperature CW Nd:YAG laser operating at 946 nm. With a 50% reflectivity outcoupler, the average threshold absorbed pump power was 18.8 mW and the average slope efficiency 91.9%, close to the heat-fraction limited value of 91.5%. Average optical to optical and photon slope efficiencies are 84% and 100% respectively. To the best of our knowledge this solid-state laser is the first to operate at the heat-fraction-limit and demonstrates record slope, photon slope and optical-optical efficiencies for optically-pumped solid-state lasers.
