Systems metabolic engineering of Corynebacterium glutamicum to assimilate formic acid for biomass accumulation and succinic acid production.

Formate as an ideal mediator between the physicochemical and biological realms can be obtained from electrochemical reduction of CO2 and used to produce bio-chemicals. Yet, limitations arise when employing natural formate-utilizing microorganisms due to restricted product range and low biomass yield. This study presents a breakthrough: engineered Corynebacterium glutamicum strains (L2-L4) through modular engineering. L2 incorporates the formate-tetrahydrofolate cycle and reverse glycine cleavage pathway, L3 enhances NAD(P)H regeneration, and L4 reinforces metabolic flux. Metabolic modeling elucidates C1 assimilation, guiding strain optimization for co-fermentation of formate and glucose. Strain L4 achieves an OD600 of 0.5 and produces 0.6 g/L succinic acid. 13C-labeled formate confirms C1 assimilation, and further laboratory evolution yields 1.3 g/L succinic acid. This study showcases a successful model for biologically assimilating formate in C. glutamicum that could be applied in C1-based biotechnological production, ultimately forming a formate-based bioeconomy.

Expanding the CRISPR Toolbox for Engineering Lycopene Biosynthesis in Corynebacterium glutamicum.

Lycopene represents one of the central compounds in the carotenoid pathway and it exhibits a potent antioxidant ability with wide potential applications in medicine, food, and cosmetics. The microbial production of lycopene has received increasing concern in recent years. Corynebacterium glutamicum (C. glutamicum) is considered to be a safe and beneficial industrial production platform, naturally endowed with the ability to produce lycopene. However, the scarcity of efficient genetic tools and the challenge of identifying crucial metabolic genes impede further research on C. glutamicum for achieving high-yield lycopene production. To address these challenges, a novel genetic editing toolkit, CRISPR/MAD7 system, was established and developed. By optimizing the promoter, ORI and PAM sequences, the CRISPR/MAD7 system facilitated highly efficient gene deletion and exhibited a broad spectrum of PAM sites. Notably, 25 kb of DNA from the genome was successfully deleted. In addition, the CRISPR/MAD7 system was effectively utilized in the metabolic engineering of C. glutamicum, allowing for the simultaneous knockout of crtEb and crtR genes in one step to enhance the accumulation of lycopene by blocking the branching pathway. Through screening crucial genes such as crtE, crtB, crtI, idsA, idi, and cg0722, an optimal carotenogenic gene combination was obtained. Particularly, cg0722, a membrane protein gene, was found to play a vital role in lycopene production. Therefore, the CBIEbR strain was obtained by overexpressing cg0722, crtB, and crtI while strategically blocking the by-products of the lycopene pathway. As a result, the final engineered strain produced lycopene at 405.02 mg/L (9.52 mg/g dry cell weight, DCW) in fed-batch fermentation, representing the highest reported lycopene yield in C. glutamicum to date. In this study, a powerful and precise genetic tool was used to engineer C. glutamicum for lycopene production. Through the modifications between the host cell and the carotenogenic pathway, the lycopene yield was stepwise improved by 102-fold as compared to the starting strain. This study highlights the usefulness of the CRISPR/MAD7 toolbox, demonstrating its practical applications in the metabolic engineering of industrially robust C. glutamicum.

Analysis of Poly(ethylene terephthalate) degradation kinetics of evolved IsPETase variants using a surface crowding model.

Poly(ethylene terephthalate) (PET) is a major plastic polymer utilized in the single-use and textile industries. The discovery of PET-degrading enzymes (PETases) has led to an increased interest in the biological recycling of PET in addition to mechanical recycling. IsPETase from Ideonella sakaiensis is a candidate catalyst, but little is understood about its structure-function relationships with regards to PET degradation. To understand the effects of mutations on IsPETase productivity, we develop a directed evolution assay to identify mutations beneficial to PET film degradation at 30 °C. IsPETase also displays enzyme concentration-dependent inhibition effects, and surface crowding has been proposed as a causal phenomenon. Based on total internal reflectance fluorescence microscopy and adsorption experiments, IsPETase is likely experiencing crowded conditions on PET films. Molecular dynamics simulations of IsPETase variants reveal a decrease in active site flexibility in free enzymes and reduced probability of productive active site formation in substrate-bound enzymes under crowding. Hence, we develop a surface crowding model to analyze the biochemical effects of three hit mutations (T116P, S238N, S290P) that enhanced ambient temperature activity and/or thermostability. We find that T116P decreases susceptibility to crowding, resulting in higher PET degradation product accumulation despite no change in intrinsic catalytic rate. In conclusion, we show that a macromolecular crowding-based biochemical model can be used to analyze the effects of mutations on properties of PETases and that crowding behavior is a major property to be targeted for enzyme engineering for improved PET degradation.

Mechanistic modeling explains the production dynamics of recombinant adeno-associated virus with the baculovirus expression vector system.

Current manufacturing processes for recombinant adeno-associated viruses (rAAVs) have less-than-desired yields and produce significant amounts of empty capsids. The increasing demand and the high cost of goods for rAAV-based gene therapies motivate development of more efficient manufacturing processes. Recently, the US Food and Drug Administration (FDA) approved the first rAAV-based gene therapy product manufactured in the baculovirus expression vector system (BEVS), a technology that demonstrated production of high titers of full capsids. This work presents a first mechanistic model describing the key extracellular and intracellular phenomena occurring during baculovirus infection and rAAV maturation in the BEVS. The model predictions are successfully validated for in-house and literature experimental measurements of the vector genome and of structural and non-structural proteins collected during rAAV manufacturing in the BEVS with the TwoBac and ThreeBac constructs. A model-based analysis of the process is carried out to identify the bottlenecks that limit full capsid formation. Vector genome amplification is found to be the limiting step for rAAV production in Sf9 cells using either the TwoBac or ThreeBac system. In turn, vector genome amplification is hindered by limiting Rep78 levels. Transgene and non-essential baculovirus protein expression in the insect cell during rAAV manufacturing also negatively influences the rAAV production yields.

A Novel Multi-Component Formulation Reduces Inflammation In Vitro and Clinically Lessens the Symptoms of Chronic Eczematous Skin.

Long-term treatments for inflammatory skin diseases like atopic dermatitis or eczema can cause adverse effects. Super Protein Multifunction (SPM) was investigated as a potential treatment for managing skin inflammation by monitoring the expression of pro-inflammatory cytokines induced using LPS and poly(I:C)/TNFα in HaCaT keratinocytes and Hs27 fibroblasts as measured via RT-PCR. SPM solution was also assessed for its effect on cytokine release, measured using ELISA, in a UVB-irradiated 3D human skin model. To evaluate the efficiency of SPM, 20 patients with mild eczematous skin were randomized to receive SPM or vehicle twice a day for three weeks in a double-blind controlled trial. In vitro studies showed SPM inhibited inflammation-induced IL-1ß, IL-6, IL-33, IL-1α, TSLP, and TNFα expression or release. In the clinical study, the SPM group showed significant improvements in the IGA, PA, and DLQI scores compared to the vehicle group. Neither group showed significant differences in VAS (pruritus). Histological analysis showed reduced stratum corneum thickness and inflammatory cell infiltration. The results suggest that SPM may reduce inflammation in individuals with chronic eczematous skin.

Engineering Escherichia coli to assimilate ß-alanine as a major carbon source.

The threat of global plastic waste accumulation has spurred the exploration of plastics derived from biological sources. A well-known example is polyester made of 1,3-propanediol (1,3-PDO). However, there is no known pathway to assimilate 1,3-PDO into the central carbon metabolism, posing a potential challenge to upcycling such plastic wastes. Here, we proposed that the 1,3-PDO assimilation pathway could pass through malonate semialdehyde (MSA) as an intermediate. Since MSA is a toxic aldehyde, ß-alanine was chosen as a surrogate substrate in this study to construct the lower part of the proposed pathway. To this end, we successfully engineered E. coli MG1655 to assimilate ß-alanine as the major carbon source. ß-alanine could be easily converted into MSA using a ß-alanine/pyruvate transaminase from Pseudomonas aeruginosa (PaBapt). However, the subsequent step to generate acetyl-CoA from MSA was unknown. After a series of phenotype screenings, adaptive laboratory evolution and transcriptomic analysis, two CoA-acylating MSA dehydrogenases from Vibrio natriegens (VnMmsD), were found to be able to complete the metabolic pathway. Optical density at 600 nm (OD600) of the resulting strain E. coli BA02 could reach 4.5 after 96 h. Two approaches were subsequently used to improve its performance. First, PaBapt and both VnMmsDs were expressed from a single plasmid to mitigate antibiotic stress. Second, a native 3-hydroxy acid dehydrogenase (EcYdfG) was disrupted to address the carbon loss to 3-hydroxypropionate (3-HP) production from MSA. OD600 of the best-performing strain E. coli BA07∆ could reach 6 within 24 h using 5 g/L ß-alanine. The construction of E. coli BA07∆ lays a solid foundation to establishing a 1,3-PDO assimilation pathway. KEYPOINTS: • This study demonstrates the implementation of a metabolic pathway to assimilate ß-alanine as the major carbon source in E. coli MG1655. • Two V. natriegens CoA-acylating methyl malonate semialdehyde dehydrogenases were used to complete the pathway in E. coli BA02. • The construction of E. coli BA02 also revealed the plasmid fusion event between two plasmids with the same replication origin.

Overproduction of Patchoulol in Metabolically Engineered Komagataella phaffii.

Patchoulol, a plant-derived sesquiterpene compound, is widely used in perfumes, cosmetics, and pharmaceuticals. Microbial production provides a promising alternative approach for the efficient and sustainable production of patchoulol. However, there are no systematic engineering studies on Komagataella phaffii aimed at achieving high-yield patchoulol production. Herein, by fusion overexpression of FPP synthase and patchoulol synthase (ERG20LPTS), increasing the precursor supply, adjusting the copy number of ERG20LPTS and PTS, and combined with adding auxiliary carbon source and methanol concentration optimization, we constructed a high-yield patchoulol-producing strain P6H53, which produced 149.64 mg/L patchoulol in shake-flask fermentation with methanol as the substrate. In fed-batch fermentation, strain P6H53 achieved the highest production (2.47 g/L, 21.48 mg/g DCW, and 283.25 mg/L/d) to date in a 5 L fermenter. This study will lay a good foundation for the development of K. phaffii as a promising chassis microbial cell for the synthesis of patchoulol and other sesquiterpenes with methanol as the carbon source.

Structure and specificity of an anti-chloramphenicol single domain antibody for detection of amphenicol residues.

Antibiotics in aquaculture prevent bacterial infection of fish, but their misuse is a public health risk and contributes to the unintentional creation of multiresistant pathogens. Regulatory agencies cannot do the rigorous, expensive testing required to keep up with the volume of seafood shipments. Current rapid test kits for these drugs enable the increase in testing needed for adequate monitoring of food supply chains, but they lack a high degree of accuracy. To combat this, we set out to discover and engineer single-domain antibodies (VHHs) that bind to small molecule antibiotics, and that can be used in rapid test kits. The small size, solubility, and stability of VHHs are useful properties that can improve the reliability and shelf-life of test kits for these adulterants. Here, we report a novel anti-chloramphenicol VHH (Chl-VHH) with a disassociation constant of 57 nM. This was achieved by immunizing a llama against a chloramphenicol-keyhole limpet hemocyanin (KLH) conjugate and screening for high affinity binders through phage display. The crystal structure of the bound-VHH to chloramphenicol was key to identifying a mutation in the binding pocket that resulted in a 16-fold improvement in binding affinity. In addition, the structure provides new insights into VHH-hapten interactions that can guide future engineering of VHHs against additional targets.

Optimization of the Isopentenol Utilization Pathway for Isoprenoid Synthesis in Escherichia coli.

Engineering microbes to produce isoprenoids can be limited by the competition between product formation and cell growth because biomass and isoprenoids are naturally derived from central metabolism. Recently, a two-step synthetic pathway was developed to partially decouple isoprenoid formation from central carbon metabolism. The pathway used exogenously added isopentenols as substrates. In the present study, we systematically optimized this isopentenol utilization pathway in Escherichia coli by comparing enzyme variants from different species, tuning enzyme expression levels, and using a two-stage process. Under the optimal conditions found in this study, ∼300 mg/L lycopene was synthesized from 2 g/L isopentenol in 24 h. The strain could be easily modified to synthesize two other isoprenoid molecules efficiently (248 mg/L ß-carotene or 364 mg/L R-(-)-linalool produced from 2 g/L isopentenol). This study lays a solid foundation for producing agri-food isoprenoids at high titer/productivity from cost-effective feedstocks.

Weighing the DNA Content of Adeno-Associated Virus Vectors with Zeptogram Precision Using Nanomechanical Resonators.

Quantifying the composition of viral vectors used in vaccine development and gene therapy is critical for assessing their functionality. Adeno-associated virus (AAV) vectors, which are the most widely used viral vectors for in vivo gene therapy, are typically characterized using PCR, ELISA, and analytical ultracentrifugation which require laborious protocols or hours of turnaround time. Emerging methods such as charge-detection mass spectroscopy, static light scattering, and mass photometry offer turnaround times of minutes for measuring AAV mass using optical or charge properties of AAV. Here, we demonstrate an orthogonal method where suspended nanomechanical resonators (SNR) are used to directly measure both AAV mass and aggregation from a few microliters of sample within minutes. We achieve a precision near 10 zeptograms which corresponds to 1% of the genome holding capacity of the AAV capsid. Our results show the potential of our method for providing real-time quality control of viral vectors during biomanufacturing.

Large-scale cultured meat production: Trends, challenges and promising biomanufacturing technologies.

Food systems of the future will need to face an increasingly clear reality - that a protein-rich diet is essential for good health, but traditional meat products will not suffice to ensure safety, sustainability, and equity of food supply chains at a global scale. This paper provides an in-depth analysis of bioprocess technologies needed for cell-based meat production and challenges in reaching commercial scale. Specifically, it reviews state-of-the-art bioprocess technologies, current limitations, and opportunities for research across four domains: cell line development, cell culture media, scaffolding, and bioreactors. This also includes exploring innovations to make cultured meat a viable protein alternative across numerous key performance indicators and for specific applications where traditional livestock is not an option (e.g., local production, space exploration). The paper explores tradeoffs between production scale, product quality, production cost, and footprint over different time horizons. Finally, a discussion explores various factors that may impact the ability to successfully scale and market cultured meat products: social acceptance, environmental tradeoffs, regulatory guidance, and public health benefits. While the exact nature of the transition from traditional livestock to alternative protein products is uncertain, it has already started and will likely continue to build momentum in the next decade.

Heterologous production of α-Carotene in Corynebacterium glutamicum using a multi-copy chromosomal integration method.

The carotenoid, α-carotene, is very beneficial for human health and wellness, but microbial production of this compound is notoriously difficult, due to the asymmetric rings on either end of its terpenoid backbone. Here, we report for the first time the efficient production of α-carotene in the industrial bacterium Corynebaterium glutamicum by using a combined pathway engineering approach including evaluation of the performance of different cyclases and analysis of key metabolic intermediates to determine flux bottlenecks in the carotenoid biosynthesis pathway. A multi-copy chromosomal integration method was pivotal in achieving stable expression of the cyclases. In fed-batch fermentation, 1,054 mg/L of α-carotene was produced by the best strain, which is the highest reported titer achieved in microbial fermentation. The success of increased α-carotene production suggests that the multi-copy chromosomal integration method can be a useful metabolic engineering tool for overexpression of key enzymes in C. glutamicum and other bacterium as well.

Mechanistic model for production of recombinant adeno-associated virus via triple transfection of HEK293 cells.

Manufacturing of recombinant adeno-associated virus (rAAV) viral vectors remains challenging, with low yields and low full:empty capsid ratios in the harvest. To elucidate the dynamics of recombinant viral production, we develop a mechanistic model for the synthesis of rAAV viral vectors by triple plasmid transfection based on the underlying biological processes derived from wild-type AAV. The model covers major steps starting from exogenous DNA delivery to the reaction cascade that forms viral proteins and DNA, which subsequently result in filled capsids, and the complex functions of the Rep protein as a regulator of the packaging plasmid gene expression and a catalyst for viral DNA packaging. We estimate kinetic parameters using dynamic data from literature and in-house triple transient transfection experiments. Model predictions of productivity changes as a result of the varied input plasmid ratio are benchmarked against transfection data from the literature. Sensitivity analysis suggests that (1) the poorly coordinated timeline of capsid synthesis and viral DNA replication results in a low ratio of full virions in harvest, and (2) repressive function of the Rep protein could be impeding capsid production at a later phase. The analyses from the mathematical model provide testable hypotheses for evaluation and reveal potential process bottlenecks that can be investigated.

Model-based control for column-based continuous viral inactivation of biopharmaceuticals.

Batch low-pH hold is a common processing step to inactivate enveloped viruses for biologics derived from mammalian sources. Increased interest in the transition of biopharmaceutical manufacturing from batch to continuous operation resulted in numerous attempts to adapt batch low-pH hold to continuous processing. However, control challenges with operating this system have not been directly addressed. This article describes a low-cost, column-based continuous viral inactivation system constructed with off-the-shelf components. Model-based, reaction-invariant pH controller is implemented to account for the nonlinearities with Bayesian estimation addressing variations in the operation. The residence time distribution is modeled as a plug flow reactor with axial dispersion in series with a continuously stirred tank reactor, and is periodically estimated during operation through inverse tracer experiments. The estimated residence time distribution quantifies the minimum residence time, which is used to adjust feed flow rates. Controller validation experiments demonstrate that pH and minimum residence time setpoint tracking and disturbance rejection are achieved with fast and accurate response and no instability. Viral inactivation testing demonstrates tight control of logarithmic reduction values over extended operation. This study provides tools for the design and operation of continuous viral inactivation systems in service of increasing productivity, improving product quality, and enhancing patient safety.

Cellular pathways of recombinant adeno-associated virus production for gene therapy.

Recombinant adeno-associated viruses (rAAVs) are among the most important vectors for in vivo gene therapies. With the rapid development of gene therapy, current rAAV manufacturing capacity faces a challenge to meet the emerging demand for these therapies in the future. To examine the bottlenecks in rAAV production during cell culture, we focus here on an analysis of cellular pathways of rAAV production, based on an overview of assembly mechanisms first in the wild-type (wt) AAV replication and then in the common methods of rAAV production. The differences analyzed between the wild-type and recombinant systems provide insights into the mechanistic differences that may correlate with viral productivity. Based on these analyses, we identify potential barriers to high productivity of rAAV and discuss future directions for improvement to meet the emerging needs set by the growth of rAAV-based therapy and the needs of patients.

Models to inform neutralizing antibody therapy strategies during pandemics: the case of SARS-CoV-2.

BACKGROUND: Neutralizing antibodies (nAbs) against SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2) can play an important role in reducing impacts of the COVID-19 pandemic, complementing ongoing public health efforts such as diagnostics and vaccination. Rapidly designing, manufacturing and distributing nAbs requires significant planning across the product value chain and an understanding of the opportunities, challenges and risks throughout. METHODS: A systems framework comprised of four critical components is presented to aid in developing effective end-to-end nAbs strategies in the context of a pandemic: (1) product design and optimization, (2) epidemiology, (3) demand and (4) supply. Quantitative models are used to estimate product demand using available epidemiological data, simulate biomanufacturing operations from typical bioprocess parameters and calculate antibody production costs to meet clinical needs under various realistic scenarios. RESULTS: In a US-based case study during the 9-month period from March 15 to December 15, 2020, the projected number of SARS-CoV-2 infections was 15.73 million. The estimated product volume needed to meet therapeutic demand for the maximum number of clinically eligible patients ranged between 6.3 and 31.5 tons for 0.5 and 2.5 g dose sizes, respectively. The relative production scale and cost needed to meet demand are calculated for different centralized and distributed manufacturing scenarios. CONCLUSIONS: Meeting demand for anti-SARS-CoV-2 nAbs requires significant manufacturing capacity and planning for appropriate administration in clinical settings. MIT Center for Biomedical Innovation's data-driven tools presented can help inform time-critical decisions by providing insight into important operational and policy considerations for making nAbs broadly accessible, while considering time and resource constraints.

Analytical methods for process and product characterization of recombinant adeno-associated virus-based gene therapies.

The optimization of upstream and downstream processes for production of recombinant adeno-associated virus (rAAV) with consistent quality depends on the ability to rapidly characterize critical quality attributes (CQAs). In the context of rAAV production, the virus titer, capsid content, and aggregation are identified as potential CQAs, affecting the potency, purity, and safety of rAAV-mediated gene therapy products. Analytical methods to measure these attributes commonly suffer from long turnaround times or low throughput for process development, although rapid, high-throughput methods are beginning to be developed and commercialized. These methods are not yet well established in academic or industrial practice, and supportive data are scarce. Here, we review both established and upcoming analytical methods for the quantification of rAAV quality attributes. In assessing each method, we highlight the progress toward rapid, at-line characterization of rAAV. Furthermore, we identify that a key challenge for transitioning from traditional to newer methods is the scarcity of academic and industrial experience with the latter. This literature review serves as a guide for the selection of analytical methods targeting quality attributes for rapid, high-throughput process characterization during process development of rAAV-mediated gene therapies.

Optimizing recombineering in Corynebacterium glutamicum.

Owing to the increasing demand for amino acids and valuable commodities that can be produced by Corynebacterium glutamicum, there is a pressing need for new rapid genome engineering tools that improve the speed and efficiency of genomic insertions, deletions, and mutations. Recombineering using the λ Red system in Escherichia coli has proven very successful at genetically modifying this organism in a quick and efficient manner, suggesting that optimizing a recombineering system for C. glutamicum will also improve the speed for genomic modifications. Here, we maximized the recombineering efficiency in C. glutamicum by testing the efficacy of seven different recombinase/exonuclease pairs for integrating single-stranded DNA and double-stranded DNA (dsDNA) into the genome. By optimizing the homologous arm length and the amount of dsDNA transformed, as well as eliminating codon bias, a dsDNA recombineering efficiency of 13,250 transformed colonies/109 viable cells was achieved, the highest efficiency currently reported in the literature. Using this optimized system, over 40,000 bp could be deleted in one transformation step. This recombineering strategy will greatly improve the speed of genetic modifications in C. glutamicum and assist other systems, such as clustered regularly interspaced short palindromic repeats and multiplexed automated genome engineering, in improving targeted genome editing.

An absorbance method for analysis of enzymatic degradation kinetics of poly(ethylene terephthalate) films.

Increased interest in poly(ethylene terephthalate) (PET)-degrading enzymes (PETases) have generated efforts to find mutants with improved catalytic activity and thermostability. Here, we present a simple and fast method to determine relative enzyme kinetics through bulk absorbance measurements of released products over time. A thermostable variant of PETase from Ideonella sakaiensis was engineered (R280A S121E D186H N233C S282C) with a denaturation temperature of 69.4 ± 0.3 °C. This was used to assess the method's ability to determine relative enzyme kinetics across variants and reveal structure-function relationships. Measurements at 24 and 72 h at 400 nM of enzyme suggest that the mutations improved catalytic rates 5- to 7-fold. On the contrary, kinetic analyses of the thermostable variant and wild-type reveal different reaction trajectories despite similar maximum catalytic rates, resulting in higher product accumulation from the thermostable variant over time. The results of the assay support the necessity for kinetic measurements to determine relationships between sequence and function for IsPETase and other PET hydrolases.