Access to 2-Fluorinated Aziridine-2-phosphonates from α,α-Halofluorinated ß-Iminophosphonates-Spectroscopic and Theoretical Studies.

The efficient one-pot halofluorination of a ß-enaminophosphonate/ß-iminophosphonate tautomeric mixture resulting in α,α-halofluorinated ß-iminophosphonates is reported. Subsequent imine reduction gave the corresponding ß-aminophosphonates as a racemic mixture or with high diastereoselectivity. The proposed protocol is the first example of a synthesis of N-inactivated aziridines substituted by a fluorine and phosphonate moiety on the same carbon atom. Based on spectroscopic and theoretical studies, we determined the cis/trans geometry of the resulting fluorinated aziridine-2-phosphonate. Our procedure, involving the reduction of cis/trans-fluoroaziridine mixture 24, allows us to isolate chiral trans-aziridines 24 as well as cis-aziridines 27 that do not contain a fluorine atom. We also investigated the influence of the fluorine atom on the reactivity of aziridine through an acid-catalyzed regioselective ring-opening reaction. The results of DFT calculations, at the PCM/ωB97x-D/def2-TZVPD level of theory, are in good agreement with the experiments. The transition states of the SN2 intramolecular cyclization of vicinal haloamines have been modeled.

Naphthalene vs. Benzene as a Transmitting Moiety: Towards the More Sensitive Trifluoromethylated Molecular Probes for the Substituent Effects.

The application of DFT computational method (B3LYP/6-311++G(d,p)) to mono- and poly(CF3)substituted naphthalene derivatives helps to study changes in the electronic properties of these compounds under the influence of 11 substituents (-Br, -CF3, -CH3, -CHO, -Cl, -CN, -F, -NH2, -NMe2, -NO2, and -OH) to confront substituent effects in naphthalene with an analogous situation in benzene. This paper shows the dependencies of theoretically calculated SESE (Substituent Effect Stabilization Energy) values on empirically determined, well-defined Hammett-type constants (σp, σm, R, and F). Described poly(CF3)substituted derivatives of naphthalene are, so far, the most sensitive molecular probes for the substituent effects in the aromatic system. The presence of the trifluoromethyl groups of such an expressive nature significantly increases the sensitivity of the SESE to changes caused by another substitution. Further, the more -CF3 groups are attached to the naphthalene ring, the more sensitive the probe is. Certain groups of probes show additivity of sensitivity: the obtained sensitivity relates to the sum of the sensitivities of the mono(CF3)substituted probes.

Highly Diastereoselective Construction of Carbon- Heteroatom Quaternary Stereogenic Centers in the Synthesis of Analogs of Bioactive Compounds: From Monofluorinated Epoxyalkylphosphonates to α-Fluoro-, ß-, or γ-Amino Alcohol Derivatives of Alkylphosphonates.

The synthesis of the stable surrogates of an important amino acid (R)-4-amino-3-hydroxybutyric acid (GABOB) such as substituted hydroxy aminophosphonic acids bearing a quaternary stereogenic center is presented. Highly diastereoselective formations of fluorinated spiroepoxy alkylphosphonate or related tertiary carbon-containing oxiranes from ß-keto phosphonates possessing methyl, phenyl, or cyclohexenyl substituents, are reported. Stereoselective acid-promoted epoxide opening by bromide or azide followed by reduction/protection afforded tertiary bromides or N-Boc derivatives of ß-amino-γ-hydroxy alkylphosphonates in most cases, while the reactions of oxiranes with different amines yielded their ß-hydroxy-γ-amino regioisomers. Surprisingly, during the synthesis of amino phosphonic acids, we observe that the acid-induced rearrangement proceeded in a high diastereospecific manner, leading finally to substituted ß-hydroxy-γ-aminoalkylphosphonic acids.

Dependence of the Substituent Effect on Solvent Properties.

The influence of a solvent on the substituent effect (SE) in 1,4-disubstituted derivatives of benzene (BEN), cyclohexa-1,3-diene (CHD), and bicyclo[2.2.2]octane (BCO) is studied by the use of polarizable continuum model method. In all X-R-Y systems for the functional group Y (NO2, COOH, OH, and NH2), the following substituents X have been chosen: NO2, CHO, H, OH, and NH2. The substituent effect is characterized by the charge of the substituent active region (cSAR(X)), substituent effect stabilization energy (SESE), and substituent constants σ or F descriptors, the functional groups by cSAR(Y), whereas π-electron delocalization of transmitting moieties (BEN and CHD) is characterized by a geometry-based index, harmonic oscillator model of aromaticity. All computations were carried out by means of B3LYP/6-311++G(d,p) method. An application of quantum chemistry SE models (cSAR and SESE) allows to compare the SE in water solutions and in the gas phase. Results of performed analyses indicate an enhancement of the SE by water. The obtained Hammett-type relationships document different nature of interactions between Y and X in aromatic and olefinic systems (a coexistence of resonance and inductive effects) than in saturated ones (only the inductive effect). An increase of electric permittivity clearly enhances communications between X and Y for BEN and CHD systems.

Experimental and theoretical studies on fluvastatin primary photoproduct formation.

Fluvastatin (FLV) belongs to the group of compounds referred to as statins, also known as 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase inhibitors. Statins act as cholesterol-lowering agents and are among the most frequently prescribed drugs. They upregulate low-density lipoprotein receptors in the liver by binding to the active site of HMG-CoA reductase, which is the key enzyme in cholesterol biosynthesis. Statins have been detected as contaminants in natural waters and are susceptible to degradation upon exposure to light. Fluvastatin is extremely sensitive to light; upon irradiation it forms a range of photoproducts. In this study the fluvastatin molar absorption coefficient and the quantum yield of the drug photodegradation were determined. The FLV photodegradation quantum yield value determined in this work (Φ = 0.13 ± 0.02) was found to be significantly larger than that previously reported in the literature. Our results also showed that the generation of singlet oxygen is not involved in the drug photodecomposition indicating that the excited triplet state of fluvastatin is not populated efficiently. Moreover, experimental methods and DFT calculations were applied to get insight into the possible mechanisms of fluvastatin primary photoproduct formation. Using the transient absorption spectroscopy technique, the transient species formed immediately after the drug excitation were followed, and the scheme for fluvastatin primary photochemistry was suggested. The primary photoproducts were identified on the basis of spectroscopic and spectrometric methods. A new mechanism for photooxygenation leading to the formation of one of the identified photoproducts (FP2) was proposed and a new approach to the formation of the other photoproduct (FP1) was provided. The theoretical mechanistic explanation of the photoproduct formation is in excellent agreement with the experimental data.

Toward the Physical Interpretation of Inductive and Resonance Substituent Effects and Reexamination Based on Quantum Chemical Modeling.

An application of a charge of the substituent active region concept to 1-Y,4-X-disubstituted derivatives of bicyclo[2.2.2]octane (BCO) [where Y = NO2, COOH, OH, and NH2 and X = NMe2, NH2, OH, OMe, Me, H, F, Cl, CF3, CN, CHO, COMe, CONH2, COOH, NO2, and NO] provides a quantitative information on the inductive component of the substituent effect (SE). It is shown that the effect is highly additive but dependent on the kind of substituents. An application of the SE stabilization energy characteristics to 1,4-disubstituted derivatives of BCO and benzene allows the definition of inductive and resonance contributions to the overall SE. Good agreements with empirical approaches are found. All calculations have been carried out by means of the B3LYP/6-311++G(d,p) method.

Inductive or Field Substituent Effect? Quantum Chemical Modeling of Interactions in 1-Monosubstituted Bicyclooctane Derivatives.

Inductive substituent constants were obtained for systems lacking the resonance effect. The application of the charge of the substituent active region concept to study the substituent effect in 1-X-substituted bicyclooctane derivatives (B3LYP/6-311++G** calculations, X = NMe2, NH2, OH, OMe, CH3, H, F, Cl, CF3, CN, CHO, COMe, CONH2, COOH, NO2, NO) has revealed inductive interactions, which are through bonds.

Towards physical interpretation of substituent effects: the case of meta- and para-substituted anilines.

Quantum chemical modeling was used to investigate the electron-donating properties of the amino group in a series of meta- and para-X-substituted anilines (X = NMe2, NH2, OH, OMe, CH3, H, F, Cl, CF3, CN, CHO, COMe, CONH2, COOH, NO2, and NO). Different methods (HF, B3LYP, and M06-2X) and basis sets (6-31+G(d,p), 6-311++G(d,p), and aug-cc-pVDZ) were applied and compared with the MP2 approach. The B3LYP/6-311++G(d,p) method was chosen as the most appropriate one. The substituent properties were described by σ, cSAR(X) and SESE descriptors; the amino group was characterized by structural (dCN, dNH and ΣNH2) and electronic [δ(N) and cSAR(NH2)] parameters; whereas the transmitting moiety was characterized by aromaticity indices HOMA and NICS, as well as by QTAIM characteristics at the ring critical point. All the used parameters were found to be mutually interrelated with much better correlations for the para-derivatives than the meta-derivatives. It was numerically confirmed that sensitivity of the amino group to the substituent effect was greater by over three times when the substituent was located in the para-position. In the case of the meta-derivatives, variability of characteristics for both the reaction center and the substituent was small. The reverse substituent effect was clearly shown by comparison of the cSAR(X) characteristics for monosubstituted benzenes, and meta- and para-substituted anilines.

Toward a physical interpretation of substituent effects: the case of fluorine and trifluoromethyl groups.

The application of ab initio and DFT computational methods at six different levels of theory (MP2/cc-pVDZ, MP2/aug-cc-pVTZ, B3LYP/cc-pVDZ, B3LYP/aug-cc-pVTZ, M06/cc-pVDZ, and M06/aug-cc-pVTZ) to meta- and para-substituted fluoro- and trifluoromethylbenzene derivatives and to 1-fluoro- and 1-trifluoromethyl-2-substituted trans-ethenes allowed the study of changes in the electronic and geometric properties of F- and CF3-substituted systems under the impact of other substituents (BeH, BF2, BH2, Br, CFO, CHO, Cl, CN, F, Li, NH2, NMe2, NO, NO2, OH, H, CF3, and CH3). Various parameters of these systems have been investigated, including homodesmotic reactions in terms of the substituent effect stabilization energy (SESE), the π and σ electron donor-acceptor indexes (pEDA and sEDA, respectively), the charge on the substituent active region (cSAR, known earlier as qSAR), and bond lengths, which have been regressed against Hammett constants, resulting mostly in an accurate correspondence except in the case of p-fluorobenzene derivatives. Moreover, changes in the characteristics of the ability of the substituent to attract or donate electrons under the impact of the kind of moiety to which the substituent is attached have been considered as the indirect substituent effect and investigated by means of the cSAR model. Regressions of cSAR(X) versus cSAR(Y) for any systems X and Y allow final results to be obtained on the same scale of magnitude.