Formic and acetic acid pKa values increase under nanoconfinement.

Organic acids are prevalent in the environment and their acidity and the corresponding dissociation constants can change under varying environmental conditions. The impact of nanoconfinement (when acids are confined within nanometer-scale domains) on physicochemical properties of chemical species is poorly understood and is an emerging field of study. By combining infrared and Raman spectroscopies with molecular dynamics (MD) simulations, we quantified the effect of nanoconfinement in silica nanopores on one of the fundamental chemical reactions-the dissociation of organic acids. The pKa of formic and acetic acids confined within cylindrical silica nanopores with 4 nm diameters were measured. MD models were constructed to calculate the shifts in the pKa values of acetic acid nanoconfined within 1, 2, 3, and 4 nm silica slit pores. Both experiments and MD models indicate a decrease in the apparent acid dissociation constants (i.e., increase in the pKa values) when organic acids are nanoconfined. Therefore, nanoconfinement stabilizes the protonated species. We attribute this observation to (1) a decrease in the average dielectric response of nanoconfined aqueous solutions where charge screening may be decreased; or (2) an increase in proton concentration inside nanopores, which would shift the equilibrium towards the protonated form. Overall, the results of this study provide the first quantification of the pKa values for nanoconfined formic and acetic acids and pave the way for a unifying theory predicting the impact of nanoconfinement on acid-base chemistry.

Distinguishing different surface interactions for nucleotides adsorbed onto hematite and goethite particle surfaces through ATR-FTIR spectroscopy and DFT calculations.

Geochemical interfaces can impact the fate and transport of aqueous species in the environment including biomolecules. In this study, we investigate the surface chemistry of adsorbed nucleotides on two different minerals, hematite and goethite, using infrared spectroscopy and density functional theory (DFT) calculations. Attenuated total reflectance-Fourier transform infrared spectroscopy is used to probe the adsorption of deoxyadenosine monophosphate (dAMP), deoxyguanosine monophosphate (dGMP), deoxycytidine monophosphate (dCMP), and deoxythymidine monophosphate (dTMP) onto either hematite or goethite particle surfaces. The results show preferential adsorption of the phosphate group to either surface. Remarkably, surface adsorption of the four nucleotides onto either hematite or goethite have nearly identical experimental spectra in the phosphate region (900 to 1200 cm-1) for each mineral surface yet are distinctly different between the two minerals, suggesting differences in binding of these nucleotides to the two mineral surfaces. The experimental absorption frequencies in the phosphate region were compared to DFT calculations for nucleotides adsorbed through the phosphate group to binuclear clusters in either a monodentate or bidentate bridging coordination. Although the quality of the fits suggests that both binding modes may be present, the relative amounts differ on the two surfaces with preferential bonding suggested to be monodentate coordination on hematite and bidentate bridging on goethite. Possible reasons for these differences are discussed.

Differential Surface Interactions and Surface Templating of Nucleotides (dGMP, dCMP, dAMP, and dTMP) on Oxide Particle Surfaces.

The fate of biomolecules in the environment depends in part on understanding the surface chemistry occurring at the biological-geochemical (bio-geo) interface. Little is known about how environmental DNA (eDNA) or smaller components, like nucleotides and oligonucleotides, persist in aquatic environments and the role of surface interactions. This study aims to probe surface interactions and adsorption behavior of nucleotides on oxide surfaces. We have investigated the interactions of individual nucleotides (dGMP, dCMP, dAMP, and dTMP) on TiO2 particle surfaces as a function of pH and in the presence of complementary and noncomplementary base pairs. Using attenuated total reflectance-Fourier transform infrared spectroscopy, there is an increased number of adsorbed nucleotides at lower pH with a preferential interaction of the phosphate group with the oxide surface. Additionally, differential adsorption behavior is seen where purine nucleotides are preferentially adsorbed, with higher surface saturation coverage, over their pyrimidine derivatives. These differences may be a result of intermolecular interactions between coadsorbed nucleotides. When the TiO2 surface was exposed to two-component solutions of nucleotides, there was preferential adsorption of dGMP compared to dCMP and dTMP, and dAMP compared to dTMP and dCMP. Complementary nucleotide base pairs showed hydrogen-bond interactions between a strongly adsorbed purine nucleotide layer and a weaker interacting hydrogen-bonded pyrimidine second layer. Noncomplementary base pairs did not form a second layer. These results highlight several important findings: (i) there is differential adsorption of nucleotides; (ii) complementary coadsorbed nucleotides show base pairing with a second layer, and the stability depends on the strength of the hydrogen bonding interactions and; (iii) the first layer coverage strongly depends on pH. Overall, the importance of surface interactions in the adsorption of nucleotides and the templating of specific interactions between nucleotides are discussed.

Photoacoustic Enhancement of Ferricyanide-Treated Silver Chalcogenide-Coated Gold Nanorods.

Plasmonic gold nanorods (AuNRs) are often employed as photoacoustic (PA) contrast agents due to their ease of synthesis, functionalization, and biocompatibility. These materials can produce activatable signals in response to a change in optical absorbance intensity or absorbance wavelength. Here, we report a surprising finding: Ag2S/Se-coated AuNRs have a ~40-fold PA enhancement upon addition of an oxidant but with no change in absorption spectra. We then study the mechanism underlying this enhancement. Electron micrographs and absorption spectra show good colloidal stability and retention of the core-shell structure after potassium hexacyanoferrate(III) (HCF) addition, ruling out aggregation and morphology-induced PA enhancement. X-ray diffraction data showed no changes, ruling out crystallographic phase changes upon HCF addition, thus leading to induced PA enhancement. Attenuated total reflectance-Fourier transform infrared spectroscopy and zeta potential analysis suggest that PA enhancement is driven by the irreversible displacement of hexadecyltrimethylammonium bromide with HCF. This is further confirmed using elemental mapping with energy-dispersive X-ray analysis. PA characterization after HCF addition showed a four-fold increase in the Grüneisen parameter (Γ), thus resulting in PA enhancement. The PA enhancement is not seen in uncoated AuNRs or spherical particles. Two possible mechanisms for PA enhancement are proposed: first, the photo-induced redox heating at the Ag2S/Se shell-HCF interface, resulting in an increase in temperature-dependent Γ, and second, an enhanced electrostriction response due to HCF adsorption on a layered plasmonic nanoparticle surface, resulting in a high thermal expansion coefficient (ß) that is directly proportional to Γ.

Absorption Spectra and the Electronic Structure of Gallic Acid in Water at Different pH: Experimental Data and Theoretical Cluster Models.

Gallic acid (GA) has been characterized in terms of its optical properties in aqueous solutions at varying pH in experiments and in theoretical calculations by analyzing the protonated and deprotonated forms of GA. This work is part of a series of studies of the optical properties of different carboxylic acids in aqueous media. The experimental electronic spectra of GA exhibit two strong well-separated absorption peaks (B- and C-bands), which agree with previous studies. However, in the current study, an additional well-defined low-energy shoulder band (A-band) in the optical spectra of GA was identified. It is likely that the A-band occurs for other carboxylic acids in solution, but because it can overlap with the B-band, it is difficult to discern. The theoretical calculations based on density functional theory were used to simulate the optical absorption spectra of GA in water at different pH to prove the existence of this newly found shoulder band and to describe and characterize the full experimental optical spectra of GA. Different cluster models were tested: (i) all water molecules are coordinated near the carboxy-group and (ii) additional water molecules near the hydroxy-groups of the phenyl ring were included. In this study, we found that both the polarizable continuum model (dielectric property of a medium) and neighboring water molecules (hydrogen-bonding) play significant roles in the optical spectrum. The results showed that only an extended cluster model with water molecules near carboxy- and hydroxy-groups together with the polarizable continuum model allowed us to fully reproduce the experimental data and capture all three absorption bands (A, B, and C). The oscillator strengths of the absorption bands were obtained from the experimental data and compared with theoretical results. Additionally, our work provides a detailed interpretation of the pH effects observed in the experimental absorption spectra.

Environmental Aspects of Oxide Nanoparticles: Probing Oxide Nanoparticle Surface Processes Under Different Environmental Conditions.

Surface chemistry affects the physiochemical properties of nanoparticles in a variety of ways. Therefore, there is great interest in understanding how nanoparticle surfaces evolve under different environmental conditions of pH and temperature. Here, we discuss the use of vibrational spectroscopy as a tool that allows for in situ observations of oxide nanoparticle surfaces and their evolution due to different surface processes. We highlight oxide nanoparticle surface chemistry, either engineered anthropogenic or naturally occurring geochemical nanoparticles, in complex media, with a focus on the impact of (a) pH on adsorption, intermolecular interactions, and conformational changes; (b) surface coatings and coadsorbates on protein adsorption kinetics and protein conformation; (c) surface adsorption on the temperature dependence of protein structure phase changes; and (d) the use of two-dimensional correlation spectroscopy to analyze spectroscopic results for complex systems. An outlook of the field and remaining challenges is also presented.

Nucleotide Adsorption on Iron(III) Oxide Nanoparticle Surfaces: Insights into Nano-Geo-Bio Interactions Through Vibrational Spectroscopy.

Molecular processes at geochemical interfaces impact many environmental processes that are critical to the fate and transport of contaminants in water systems. Often these interfaces are coated with natural organic matter, oxyanions, or biological components, yet little is understood about these coatings. Herein, we are interested in better understanding the interaction of biological components with nanoscale iron oxide minerals. In particular, we use attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy to investigate the adsorption behavior of deoxyadenosine monophosphate (dAMP) on hematite nanoparticle surfaces as a function of pH and in the presence and absence of adsorbed phosphate. These results show that fewer nucleotides adsorb at higher pH. Additionally, when phosphate anions are preadsorbed, nucleotide adsorption is significantly limited due to site-blocking by adsorbed inorganic phosphate. The pH dependence provides insights into the adsorption process and the importance of electrostatic interactions. Preadsorbed phosphate affects the binding mode of dAMP, suggesting synergistic interactions between the coadsorbates. Two-dimensional correlation spectroscopy was used to further analyze the infrared spectra. Based on this analysis, a dAMP adsorption pathway onto a preadsorbed phosphate-hematite surface was proposed, suggesting the displacement of adsorbed phosphate by dAMP. Overall, this study provides some insights into geochemical-biological interactions on nanoscale iron oxide surfaces using vibrational spectroscopy.

Salting Up of Proteins at the Air/Water Interface.

Vibrational sum frequency generation (VSFG) spectroscopy and surface pressure measurements are used to investigate the adsorption of a globular protein, bovine serum albumin (BSA), at the air/water interface with and without the presence of salts. We find at low (2 to 5 ppm) protein concentrations, which is relevant to environmental conditions, both VSFG and surface pressure measurements of BSA behave drastically different from at higher concentrations. Instead of emerging to the surface immediately, as observed at 1000 ppm, protein adsorption kinetics is on the order of tens of minutes at lower concentrations. Most importantly, salts strongly enhance the presence of BSA at the interface. This "salting up" effect differs from the well-known "salting out" effect as it occurs at protein concentrations well-below where "salting out" occurs. The dependence on salt concentration suggests this effect relates to a large extent electrostatic interactions and volume exclusion. Additionally, results from other proteins and the pH dependence of the kinetics indicate that salting up depends on the flexibility of proteins. This initial report demonstrates "salting up" as a new type of salt-driven interfacial phenomenon, which is worthy of continued investigation given the importance of salts in biological and environmental aqueous systems.

Random heteropolymers preserve protein function in foreign environments.

The successful incorporation of active proteins into synthetic polymers could lead to a new class of materials with functions found only in living systems. However, proteins rarely function under the conditions suitable for polymer processing. On the basis of an analysis of trends in protein sequences and characteristic chemical patterns on protein surfaces, we designed four-monomer random heteropolymers to mimic intrinsically disordered proteins for protein solubilization and stabilization in non-native environments. The heteropolymers, with optimized composition and statistical monomer distribution, enable cell-free synthesis of membrane proteins with proper protein folding for transport and enzyme-containing plastics for toxin bioremediation. Controlling the statistical monomer distribution in a heteropolymer, rather than the specific monomer sequence, affords a new strategy to interface with biological systems for protein-based biomaterials.