Solvent-Free Mechanochemical Synthesis and Characterization of Nickel Tellurides with Various Stoichiometries: NiTe, NiTe2 and Ni2Te3.

The paper reports the synthesis of nickel tellurides via a mechanochemical method from elemental precursors. NiTe, NiTe2, and Ni2Te3 were prepared by milling in stainless steel vials under nitrogen, using milling times from 1 h to 12 h. The products were characterized by powder X-ray diffraction (pXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), dynamic light scattering (DLS), vibrating sample magnetometer (VSM), UV-VIS spectrometry, and thermal analysis (TGA and DSC). The products were obtained in the form of aggregates, several hundreds of nanometers in size, consisting of smaller nanosized crystallites. The magnetic measurements revealed a ferromagnetic behavior at room temperature. The band gap energies calculated using Tauc plots for NiTe, NiTe2, and Ni2Te3 were 3.59, 3.94, and 3.70 eV, respectively. The mechanochemical process has proved to be a simple and successful method for the preparation of binary nickel tellurides, avoiding the use of solvents, toxic precursors, and energy-consuming reaction conditions.

Synthesis and Characterization of Tungsten Suboxide WnO3n-1 Nanotiles.

WnO3n-1 nanotiles, with multiple stoichiometries within one nanotile, were synthesized via the chemical vapour transport method. They grow along the [010] crystallographic axis, with the thickness ranging from a few tens to a few hundreds of nm, with the lateral size up to several µm. Distinct surface corrugations, up to a few 10 nm deep appear during growth. The {102}r crystallographic shear planes indicate the WnO3n-1 stoichiometries. Within a single nanotile, six stoichiometries were detected, namely W16O47 (WO2.938), W15O44 (WO2.933), W14O41 (WO2.928), W13O38 (WO2.923), W12O35 (WO2.917), and W11O32 (WO2.909), with the last three never being reported before. The existence of oxygen vacancies within the crystallographic shear planes resulted in the observed non-zero density of states at the Fermi energy.

Multi-stoichiometric quasi-two-dimensional WnO3n-1 tungsten oxides.

Quasi-two-dimensional tungsten oxide structures, which nucleate by epitaxial growth on W19O55 nanowires (NW) and grow as thin platelets, were identified. Both the nanowires and the platelets accommodate oxygen deficiency by the formation of crystallographic shear planes. Stoichiometric phases, W18O53 (WO2.944), W17O50 (WO2.941), W16O47 (WO2.938), W15O44 (WO2.933), W14O41 (WO2.929), W10O29 (WO2.9), and W9O26 (WO2.889), syntactically grow inside a single platelet. These layered crystals show a new kind of polycrystallinity, where crystallographic shear planes accommodate oxygen deficiency and at the same time stabilize this multi-stoichiometric structure.

Size-related mineralogical and surface physicochemical properties of the mineral particles from the recent sediments of the Eastern Adriatic Sea.

The mineral composition and surface physico-chemical properties, i.e., specific surface area (SSA), cation exchange capacity (CEC), and surface charge of recent sediments and their submicron mineral fractions from different sedimentological environments of the Eastern Adriatic were investigated. The influence of organic matter on these properties was also investigated. It was shown that illite and mixed-layered clay minerals (MLCM) were ubiquitous and showed no size-related preferences while the occurrence of smectites, chlorites, and kaolinites varied. The smectites content increased and the chlorites decreased slightly with decreasing particle size. The sediments from the carbonate-rich environment contained no smectites or chlorites and had the highest kaolinite content. For the first time, in the recent sediments of the Adriatic Sea the poorly- and the well-crystallised kaolinite (Kl and KlD) were distinguished. While Kl predominates in the submicron-sized fraction, KlD occurred only in micron-sized fractions. Authigenic aragonite of submicron-sized was determined in a distinct environment of the semi-enclosed marine lake. The differences in mineral composition and particle size of sediments and their separated fractions were reflected in a wide range of the SSA and CEC values obtained. The highest values of SSA and CEC were determined in the phyllosilicates-rich submicron-sized fractions range, 109 m2g-1 and 87.4 cmol+kg-1, respectively. The submicron-sized fraction from aragonite-rich marine lake showed the lowest values of SSA (56.4 m2g-1) and CEC (38.8 cmol+kg-1), which are still unexpectedly high for carbonate-rich environments. The removal of organic matter resulted in a significant increase in SSA and CEC, up to 150% and 76%, respectively.

Copper-polyaniline nanocomposite: Role of physicochemical properties on the antimicrobial activity and genotoxicity evaluation.

Copper nanoparticles (Cu NPs) have proven to own excellent antimicrobial efficacy, but the problems of easy oxidation and aggregation limit their practical application. Here, nanocomposite based on polyaniline (PANI) and Cu NPs solved this problem and brought additional physicochemical properties that are markedly advantageous for antimicrobial applications. Current work exploits this potential, to examine its time- and concentration-dependent antimicrobial activity, employing E. coli, S. aureus, and C. albicans as a model microbial species. Regarding the presence of polaronic charge carriers in the fibrous polyaniline network, effects of Cu NPs' size and their partially oxidized surfaces (the data were confirmed by HRTEM, FESEM, XRD, Raman and XPS analysis), as well as rapid copper ions release, Cu-PANI nanocomposite showed efficient bactericidal and fungicidal activities at the concentrations ≤1 ppm, within the incubation time of 2 h. Beside the quantitative analysis, the high levels of cellular disruption for all tested microbes were evidenced by atomic force microscopy. Moreover, the minimum inhibitory and bactericidal concentrations of the Cu-PANI nanocomposite were lower than those reported for other nanocomposites. Using such low concentrations is recognized as a good way to avoid its toxicity toward the environment. For this purpose, Cu-PANI nanocomposite is tested for its genotoxicity and influence on the oxidative status of the human cells in vitro.

Formation and morphogenesis of a cuttlebone's aragonite biomineral structures for the common cuttlefish (Sepia officinalis) on the nanoscale: Revisited.

This study describes and examines the structural and morphological properties of the hierarchically organized, aragonite cuttlebone forms for the common cuttlefish (Sepia officinalis, L.), including its main structural parts, the dorsal shield, and the chambers. Specifically, it complements the mechanism for the self-organized formation of aragonite, identifies the presence, and determines the role of soluble organic matrix (SOM) proteins in the morphogenesis of the cuttlebone's biomineral structures on the nanoscale. The structure and morphology of the cuttlebone were examined using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM), and their thermal properties by thermo-gravimetric analysis (TGA) and differential thermal analysis (DTA). Proteins from the SOM were investigated using two-dimensional sodium dodecyl sulfate polyacrylamide gel electrophoresis (2D-PAGE), matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS), nano liquid chromatography tandem mass spectrometry (nano-LC ESI-MS) and Edman degradation. The results showed that the cuttlebone exhibited several diverse biomineral structures characterized by complex morphologies. Their formation is governed by the organic matrix, particularly proteins, which at the earliest stage of development provide templates for the initial extracellular nucleation of the aragonite nanocrystals. This is followed by a bottom-up morphogenesis, based on the nanoscale oriented aggregation and coalescence of primarily formed aragonite nanograins, which results in the hierarchically organized, nanostructured, aragonite forms. The molecular masses of the most pronounced SOM proteins from the dorsal shield were about 10, 15, 40 and 60kDa, while from the chambers they were 10, 20, 25, 30 and 45kDa. Peptide fragments corresponding to Sep7, Sep8, chitin synthase 1, ficoline-2, polyubiquitin and the ubiquitin carboxyl-terminal hydrolase 32-like protein were detected in the SOM, with these proteins having functional properties related to the biomineralization processes. In general, there are mostly acidic proteins present in alternatively glycosylated forms, which are common attributes of biomineralization-related proteins.

Geochemistry of recent aragonite-rich sediments in Mediterranean karstic marine lakes: Trace elements as pollution and palaeoredox proxies and indicators of authigenic mineral formation.

This study investigates the geochemical characteristics of recent shallow-water aragonite-rich sediments from the karstic marine lakes located in the pristine environment on the island of Mljet (Adriatic Sea). Different trace elements were used as authigenic mineral formation, palaeoredox and pollution indicators. The distribution and the historical record of trace elements deposition mostly depended on the sedimentological processes associated with the formation of aragonite, early diagenetic processes governed by the prevailing physico-chemical conditions and on the recent anthropogenic activity. This study demonstrated that Sr could be used as a proxy indicating authigenic formation of aragonite in a marine carbonate sedimentological environment. Distribution of the redox sensitive elements Mo, Tl, U and Cd was used to identify changes in redox conditions in the investigated lake system and to determine the geochemical cycle of these elements through environmental changes over the last 100 years. The significant enrichment of these elements and the presence of early formed nanostructured authigenic framboidal pyrite in laminated deeper parts of sediment in Malo Jezero, indicate sporadic events of oxygen-depleted euxinic conditions in the recent past. Concentrations of trace elements were in the range characteristic for non-contaminated marine carbonates. However, the increase in the concentrations of Zn, Cu, Pb, Sn, Bi in the upper-most sediment strata of Veliko Jezero indicates a low level of trace element pollution, resulting from anthropogenic inputs over the last 40 years. The presence of butyltin compounds (BuTs) in the surface sediment of Veliko Jezero additionally indicates the anthropogenic influence in the recent past.

Formation and properties of nanostructured colloidal manganese oxide particles obtained through the thermally controlled transformation of manganese carbonate precursor phase.

Structurally and morphologically different colloidal manganese oxide solids, including manganosite (MnO), bixbyite (Mn2O3) and hausmannite (Mn(2+)[Mn(3+)]2O4), were obtained through the initial biomimetically induced precipitation of a uniform, nanostructured and micron-sized rhodochrosite (MnCO3) precursor phase and their subsequent thermally controlled transformation into oxide structures in air and Ar/H2 atmospheres. The structures and morphology of the obtained precipitates were investigated using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM). Their surface properties were investigated by electrophoretic mobilities (EPM) and specific surface area (SSA) measurements. The results showed that the structurally diverse, micron-sized, spherical manganese oxide particles exhibit unusual and fascinating nanostructured surface morphologies. These were developed through the coalescence of an initially formed, nanosized, crystalline, manganese carbonate precursor phase which, during the heating, transformed into coarser, irregular, elongated, micron-sized, manganese oxide solids. It was also shown that structural transformations and morphological tailoring were followed by significant changes in the physico-chemical properties of the obtained solids. Their SSA values were drastically reduced as a result of the progressive coalescence at the particle surfaces occurring at higher temperatures. The isoelectric points (IEPs) of the obtained manganese oxides were diverse. This is the consequence of their range of crystal-chemical properties that governed the complex physico-chemical processes at the interface of the manganese oxide solid and the aqueous solution. The results of this study may lead to a conceptually new method for the synthesis of high-performance, nanostructured, manganese oxide solids with desirable structural, morphological and surface properties.

Transformation of hydrogen titanate nanoribbons to TiO2 nanoribbons and the influence of the transformation strategies on the photocatalytic performance.

The influence of the reaction conditions during the transformation of hydrogen titanate nanoribbons to TiO2 nanoribbons on the phase composition, the morphology, the appearance of the nanoribbon surfaces and their optical properties was investigated. The transformations were performed (i) through a heat treatment in oxidative and reductive atmospheres in the temperature range of 400-650 °C, (ii) through a hydrothermal treatment in neutral and basic environments at 160 °C, and (iii) through a microwave-assisted hydrothermal treatment in a neutral environment at 200 °C. Scanning electron microscopy investigations showed that the hydrothermal processing significantly affected the nanoribbon surfaces, which became rougher, while the transformations based on calcination in either oxidative or reductive atmospheres had no effect on the morphology or on the surface appearance of the nanoribbons. The transformations performed in the reductive atmosphere, an NH3(g)/Ar(g) flow, and in the ammonia solution led to nitrogen doping. The nitrogen content increased with an increasing calcination temperature, as was determined by X-ray photoelectron spectroscopy. According to electron paramagnetic resonance measurements the calcination in the reductive atmosphere also resulted in a partial reduction of Ti(4+) to Ti(3+). The photocatalytic performance of the derived TiO2 NRs was estimated on the basis of the photocatalytic oxidation of isopropanol. After calcinating in air, the photocatalytic performance of the investigated TiO2 NRs increased with an increased content of anatase. In contrast, the photocatalytic performance of the N-doped TiO2 NRs showed no dependence on the calcination temperature. An additional comparison showed that the N-doping significantly suppressed the photocatalytic performance of the TiO2 NRs, i.e., by 3 to almost 10 times, in comparison with the TiO2 NRs derived by calcination in air. On the other hand, the photocatalytic performance of the hydrothermally derived TiO2 NRs was additionally improved by a subsequent heat treatment in air.

Nanomaterial with high antimicrobial efficacy--copper/polyaniline nanocomposite.

This study explores different mechanisms of antimicrobial action by designing hybrid nanomaterials that provide a new approach in the fight against resistant microbes. Here, we present a cheap copper-polyaniline (Cu-PANI) nanocomposite material with enhanced antimicrobial properties, prepared by simple in situ polymerization method, when polymer and metal nanoparticles are produced simultaneously. The copper nanoparticles (CuNPs) are uniformly dispersed in the polymer and have a narrow size distribution (dav = 6 nm). We found that CuNPs and PANI act synergistically against three strains, Escherichia coli, Staphylococcus aureus, and Candida albicans, and resulting nanocomposite exhibits higher antimicrobial activity than any component acting alone. Before using the colony counting method to quantify its time and concentration antimicrobial activity, different techniques (UV-visible spectroscopy, transmission electron microscopy, scanning electron microscope, field emission scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectrophotometry, and inductively coupled plasma optical emission spectrometry) were used to identify the optical, structural, and chemical aspects of the formed Cu-PANI nanocomposite. The antimicrobial activity of this nanocomposite shows that the microbial growth has been fully inhibited; moreover, some of the tested microbes were killed. Atomic force microscopy revealed dramatic changes in morphology of tested cells due to disruption of their cell wall integrity after incubation with Cu-PANI nanocomposite.

Is Nano-Silver Safe within Bioactive Hydroxyapatite Composites?

Because of the abounded presence of the silver-containing products in the market and intensively studied silver-containing biomaterials in the literature, we investigated a hypothesis that stabilizing silver within bioactive hydroxyapatite composite is capable to provide safe and effective antibacterial action. For that purpose nanocomposite made of bioactive, mineral hydroxyapatite (HAp) and antibacterial silver (Ag) is studied for interactions with both, bacterial and human cells. The nanocomposite provides controlled release of Ag ions; induces severe damages in bacterial cells and is capable for strong bacteriostatic and bactericidal action. On the other hand, investigations of the material's interactions with human cells confirm that lower concentrations are highly compatible with osteosarcoma and fetal lung fibroblasts, but at higher concentrations (that provide bacteriostatic and bactericidal influences in bacteria) the material is toxic and capable of inducing morphological changes similar to those observed in bacterial cells.

Photocatalytic properties of TiO2 and TiO2/Pt: a sol-precipitation, sonochemical and hydrothermal approach.

In this work we prepared TiO2 nano-powders and TiO2/Pt nano-composites via three synthesis methods (sol-precipitation, sonochemical method, hydrothermal method) starting with the same precursors and media. To evaluate and compare the physical properties of the prepared materials, X-ray diffraction analysis, BET measurements, FTIR spectroscopy, X-ray photoelectron spectroscopy (XPS) and electron microscopy (TEM, HRTEM, SAED) were applied. The results showed changes to the TiO2 phase composition and crystallinity, the specific surface area as well as the platinum's particle shape and size, depending on the method of synthesis. To determine the photocatalytic efficiency of the prepared materials, the photocatalytic discoloration of the methylene blue solution was evaluated using UV-Vis spectroscopy. The important properties required for a high photocatalytic activity, related to the surface characteristics and the phase composition, were determined in terms of the synthesis method. It was concluded that the optimum characteristics were obtained when using the hydrothermal approach, where the TiO2 had two phases, i.e., - anatase and rutile, a Pt-phase in the form of nanoparticles and adsorbed Pt-molecular species, as well as the presence of available free surface hydroxyl groups. Such characteristics had a critical influence on the photocatalytic activity of the final material.

Composite PLGA/AgNpPGA/AscH nanospheres with combined osteoinductive, antioxidative, and antimicrobial activities.

The global rise in the resistance of pathogens to conventional antibiotics has created an intensive search for alternative materials with antimicrobial properties. This study is performed with an intention to investigate the combined effects of poly(l-glutamic acid)-capped silver nanoparticles (AgNpPGA) and ascorbic acid (AscH) encapsulated within freeze-dried poly(lactide-co-glycolide) (PLGA) nanospheres to obtain a nanomaterial with simultaneous osteoinductive, antioxidative, and prolonged antimicrobial properties. The influence of PLGA/AgNpPGA/AscH particles on (i) viability and superoxide production of human umbilical vein endothelial cells in vitro, (ii) morphology and expression of osteogenic markers in osteoblastic MC3T3-E1 cells in vitro, and (iii) antimicrobial activity against a Gram-positive bacterium, methicillin-resistant Staphylococcus aureus, and a Gram-negative bacterium, Escherichia coli, was investigated. PLGA/AgNpPGA/AscH nanoparticles showed a superior and extended antibacterial activity against both types of bacteria. The nanoparticles appeared to be capable of delivering ascorbate to the cells, which was evidenced by the significant decrease in the level of superoxides in human umbilical vein endothelial cells and which could have a therapeutic potential in preventing oxidative stress. PLGA/AgNpPGA/AscH nanoparticles had a positive effect on MC3T3-E1 osteoblastic cells in vitro, promoting: (i) an intimate contact with the cells and preservation of their healthy morphologies; (ii) unreduced cell viability; and (iii) multiple-fold upregulation of two osteogenic markers: osteocalcin and type I procollagen. It is concluded that PLGA/AgNpPGA/AscH nanospheres present a promising new material for the treatment of infections and use in wound dressings and other prophylactic applications.

A critical assessment of the specific role of microwave irradiation in the synthesis of ZnO micro- and nanostructured materials.

A rapid, microwave-assisted hydrothermal method has been developed to access ultrafine ZnO hexagonal microrods of about 3-4 µm in length and 200-300 nm in width by using a 1:5 zinc nitrate/urea precursor system. The size and morphology of these ZnO materials can be influenced by subtle changes in precursor concentration, solvent system, and reaction temperature. Optimized conditions involve the use of a 1:3 water/ethylene glycol solvent system and 10 min microwave heating at 150 °C in a dedicated single-mode microwave reactor with internal temperature control. Carefully executed control experiments ensuring identical heating and cooling profiles, stirring rates, and reactor geometries have demonstrated that for these preparations of ZnO microrods no differences between conventional and microwave dielectric heating are observed. The resulting ZnO microrods exhibited the same crystal phase, primary crystallite size, shape, and size distribution regardless of the heating mode. Similar results were obtained for the ultrafast preparation of ZnO nanoparticles with diameters of approximately 20 nm, synthesized by means of a nonaqueous sol-gel process at 200 °C from a Zn(acac)(2) (acac=acetylacetonate) precursor in benzyl alcohol. The specific role of microwave irradiation in enhancing these nanomaterial syntheses can thus be attributed to a purely thermal effect as a result of higher reaction temperatures, more rapid heating, and a better control of process parameters.

Interplay between the structural and magnetic probes in the elucidation of the structure of a novel 2D layered [V4O4(OH)2(O2CC6H4CO2)4]·DMF.

The title compound has been synthesized under solvothermal conditions by reacting vanadium(V) oxytriisopropoxide with terephthalic acid in N,N-dimethylformamide. A combination of synchrotron powder diffraction, infrared spectroscopy, scanning and transmission electron microscopy, and thermal and chemical analysis elucidated the chemical, structural and microstructural features of a new 2D layered inorganic-organic framework. Due to the low-crystallinity of the final material, its crystal structure has been solved from synchrotron X-ray powder diffraction data using a direct space global optimization technique and subsequent constraint Rietveld refinement. [V(4)O(4)(OH)(2)(O(2)CC(6)H(4)CO(2))(4)]·DMF crystallizes in the monoclinic system (space group P2/m (No. 10)); cell parameters: a = 20.923(4) Å, b = 5.963(4) Å, c = 20.425(1) Å, ß = 123.70(6)°, V = 2120.1(9) Å(3), Z = 2. The overall structure can be described as an array of parallel 2D layers running along [-101] direction, consisting of two types of vanadium oxidation states and coordination polyhedra: face-shared trigonal prisms (V(4+)) and distorted corner-shared square pyramids (V(5+)). Both configurations form independent parallel chains oriented along the 2-fold symmetry crystallographic b-axis mutually interlinked with terephthalate ligands in a monodentate mode perpendicular to it. The morphology of the compound exhibits long nanofibers, with the growth direction along the layered [-101] axis. The magnetic susceptibility measurements show that the magnetic properties of [V(4)O(4)(OH)(2)(O(2)CC(6)H(4)CO(2))(4)]·DMF can be described by a linear antiferromagnetic chain model, with the isotropic exchange interaction of J = -75 K between the nearest V(4+) neighbours of S = 1/2.

Polymorphism of LaTaTiO6.

Two polymorphs of LaTaTiO6, i.e. monoclinic and orthorhombic, were synthesized by solid-state reaction technique. Both were found to be isostructural with analogous niobium compounds which were used as structural models. Structural characterization was performed on X-ray powder data by Rietveld refinement procedure which resulted in final Rwp values of 7.01 and 7.52% for orthorhombic and monoclinic form, respectively. Comparisons between both title compounds are given and their plausibility is proved by bond valence sums and global instability index calculations. For the monoclinic polymorph, dielectric properties measured at 1 MHz are also given.

A new, simple, green, and one-pot four-component synthesis of bare and poly(α,γ, L-glutamic acid)-capped silver nanoparticles.

A simple and green chemical method has been developed to synthesize stable bare and capped silver nanoparticles based on the reduction of silver ions by glucose and capping by poly(α,γ,L-glutamic acid) (PGA). The use of ammonia during synthesis was avoided. PGA has had a dual role in the synthesis and was used as a capping agent to make the silver nanoparticle more biocompatible and to protect the nanoparticles from agglomerating in the liquid medium. The synthesized PGA-capped silver nanoparticles in the size range 5-45 nm were stable over long periods of time, without signs of precipitation. Morphological examination has shown that the silver nanoparticles had a nearly spherical, multiply twinned structure. The effects of the reaction temperature and the reaction time during the synthesis were investigated too. The biocompatibility of the PGA-capped silver nano-particles is discussed in terms of in vitro toxicity with human intestinal Caco-2 cells. The samples were characterized by UV-Visible spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, and zeta potential measurements.

Optical properties of exfoliated MoS2 coaxial nanotubes - analogues of graphene.

We report on the first exfoliation of MoS2 coaxial nanotubes. The single-layer flakes, as the result of exfoliation, represent the transition metal dichalcogenides' analogue of graphene. They show a very low degree of restacking in comparison with exfoliation of MoS2 plate-like crystals. MoS2 monolayers were investigated by means of electron and atomic force microscopies, showing their structure, and ultraviolet-visible spectrometry, revealing quantum confinement as the consequence of the nanoscale size in the z-direction.

Structure of LaTi2Al9O19 and reanalysis of the crystal structure of La3Ti5Al15O37.

The non-perovskite compound LaTi(2)Al(9)O(19) was synthesized and structurally characterized by conventional X-ray powder diffraction and shown to be isostructural with SrTi(3)Al(8)O(19), as confirmed by bond-valence sum calculations. The dielectric properties of LaTi(2)Al(9)O(19) at 1 MHz were measured. The crystal structure of La(3)Ti(5)Al(15)O(37), which is referred to as the most complex structure solved ab initio from X-ray powder diffraction (XRPD) to date, is shown to be incorrect.

Tem analyses of the local crystal and domain structures in (Na(1-x)K(x))0.5Bi(0.5)TiO3 perovskite ceramics.

The local crystal and domain structures of the ((Na(1-x)K(x))(0.5)Bi(0.5)TiO(3) (NBT-KBT) solid solutions were studied because of their influence on the enhanced electromechanical properties of ceramics. Based on X-ray diffraction, the morphotropic phase boundary (MPB) was determined for the composition x = 0.20, in which the rhombohedral and the tetragonal structures were observed to coexist. However, detailed domain-structure analyses using transmission electron microscopy (TEM), performed on the NBT, KBT, and five NBT-KBT solid-solution compositions, revealed some structural changes at/near the MPB. In the samples on the tetragonal side of the MPB, the grains showed a lamellar domain structure with 90° orientations of the individual domains, separated by straight domain boundaries, i.e., (011)/(101) twin planes. The rhombohedral samples on the other side of the MPB showed a typical square-net pattern with needle-like or lamellar ~71°/109° rhombohedral domains with (001) and/or (110) twin planes separating the individual domains. The domain structure at the MPB showed well-defined lamellar domains. Based on the occurrence of the superstructure reflections in the SAED patterns of various crystallographic zones, on the characteristic splitting of the reflections, and on the domain morphology observations, the crystal structure in/near the boundary region was determined to be a tetragonal structure with an in-phase oxygen octahedral tilt system (probably a(0)a(0)c(+)). It is suggested that the tetragonal polar order is partly induced from the rhombohedral structure at the MPB as a result of mechanical loading during TEM sample preparation.