Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 4 de 4
Filter
Add more filters










Database
Language
Publication year range
1.
Environ Sci Technol ; 57(23): 8536-8547, 2023 06 13.
Article in English | MEDLINE | ID: mdl-37264616

ABSTRACT

Geologic carbon storage currently implies that CO2 is injected into reservoirs more than 1 km deep, but this concept of geologic storage can be expanded to include the injection of solid, carbon-bearing particles into geologic formations that are one to two orders of magnitude shallower than conventional storage reservoirs. Wood is half carbon, available in large quantities at a modest cost, and can be milled into particles and injected as a slurry. We demonstrate the feasibility of shallow geologic storage of carbon by a field experiment, and the injection process also raises the ground surface. The resulting CO2 storage and ground uplift rates upscale to a technique that could contribute to the mitigation of climate change by storing carbon as well as helping to adapt to flooding risks by elevating the ground surface above flood levels. A life-cycle assessment indicates that CO2 emissions caused by shallow geologic storage of carbon are a small fraction of the injected carbon.


Subject(s)
Carbon Dioxide , Carbon , Floods , Climate Change
2.
Dent Mater J ; 39(6): 976-983, 2020 Dec 03.
Article in English | MEDLINE | ID: mdl-32727961

ABSTRACT

This study investigated the effect of high-irradiance light-curing on exposure time and pulpal temperature of adequately-cured composite. Composite placed in a molar preparation was cured using high-irradiance light-curing units (Flashmax P3, Valo, S.P.E.C. 3 LED, Cybird XD) and tested for hardness occlusal-gingivally. The first group had exposure times set according to manufacturer settings (recommended), second group to yield 80% of maximum hardness at the 2 mm depth (experimental), and third group was set at 20 s (extended). Exposure time necessary to adequately polymerize the composite at 2 mm depth was 9 s for the Cybird XD and Valo and 12 s for S.P.E.C. 3 LED and Flashmax P3. None of the high-irradiance light-curing units adequately polymerized the composite at the manufacturer-recommended minimum-exposure times of 1-3 s. Exposure times necessary to adequately polymerize composite at 2 mm resulted in a maximum pulpal-temperature increase well below the temperature associated with possible pulpal necrosis.


Subject(s)
Composite Resins , Curing Lights, Dental , Hardness , Light-Curing of Dental Adhesives , Materials Testing , Temperature , Time
3.
PLoS One ; 7(7): e41580, 2012.
Article in English | MEDLINE | ID: mdl-22848533

ABSTRACT

Understanding the fundamental niche of invasive species facilitates our ability to predict both dispersal patterns and invasion success and therefore provides the basis for better-informed conservation and management policies. Here we focus on Nile tilapia (Oreochromis niloticus Linnaeus, 1758), one of the most widely cultured fish worldwide and a species that has escaped local aquaculture facilities to become established in a coastal-draining river in Mississippi (northern Gulf of Mexico). Using empirical physiological data, logistic regression models were developed to predict the probabilities of Nile tilapia survival, growth, and reproduction at different combinations of temperature (14 and 30°C) and salinity (0-60, by increments of 10). These predictive models were combined with kriged seasonal salinity data derived from multiple long-term data sets to project the species' fundamental niche in Mississippi coastal waters during normal salinity years (averaged across all years) and salinity patterns in extremely wet and dry years (which might emerge more frequently under scenarios of climate change). The derived fundamental niche projections showed that during the summer, Nile tilapia is capable of surviving throughout Mississippi's coastal waters but growth and reproduction were limited to river mouths (or upriver). Overwinter survival was also limited to river mouths. The areas where Nile tilapia could survive, grow, and reproduce increased during extremely wet years (2-368%) and decreased during extremely dry years (86-92%) in the summer with a similar pattern holding for overwinter survival. These results indicate that Nile tilapia is capable of 1) using saline waters to gain access to other watersheds throughout the region and 2) establishing populations in nearshore, low-salinity waters, particularly in the western portion of coastal Mississippi.


Subject(s)
Adaptation, Physiological , Cichlids/physiology , Introduced Species , Models, Biological , Reproduction/physiology , Animals , Gulf of Mexico , Mississippi
4.
J Environ Manage ; 92(3): 695-707, 2011 Mar.
Article in English | MEDLINE | ID: mdl-21030134

ABSTRACT

A steam injection pilot-scale experiment was performed on the unsaturated zone of a strongly heterogeneous fractured soil contaminated by jet fuel. Before the treatment, the soil was stimulated by creating sub-horizontal sand-filled hydraulic fractures at three depths. The steam was injected through one hydraulic fracture and gas/water/non-aqueous phase liquid (NAPL) was extracted from the remaining fractures by applying a vacuum to extraction wells. The injection strategy was designed to maximize the heat delivery over the entire cell (10 m × 10 m × 5 m). The soil temperature profile, the recovered NAPL, the extracted water, and the concentrations of volatile organic compounds (VOCs) in the gas phase were monitored during the field test. GC-MS chemical analyses of pre- and post-treatment soil samples allowed for the quantitative assessment of the remediation efficiency. The growth of the heat front followed the configuration of hydraulic fractures. The average concentration of total hydrocarbons (g/kg of soil) was reduced by ∼ 43% in the upper target zone (depth = 1.5-3.9 m) and by ∼ 72% over the entire zone (depth = 1.5-5.5 m). The total NAPL mass removal based on gas and liquid stream measurements and the free-NAPL product were almost 30% and 2%, respectively, of those estimated from chemical analyses of pre- and post-treatment soil samples. The dominant mechanisms of soil remediation was the vaporization of jet fuel compounds at temperatures lower than their normal boiling points (steam distillation) enhanced by the ventilation of porous matrix due to the forced convective flow of air. In addition, the significant reduction of the NAPL mass in the less-heated deeper zone may be attributed to the counter-current imbibition of condensed water from natural fractures into the porous matrix and the gravity drainage associated with seasonal fluctuations of the water table.


Subject(s)
Environmental Restoration and Remediation , Hydrocarbons , Soil Pollutants/chemistry , Gas Chromatography-Mass Spectrometry , Pilot Projects , Poland , Steam
SELECTION OF CITATIONS
SEARCH DETAIL
...