Characterisation of the morphology of surface-assembled Au nanoclusters on amorphous carbon.

In this study, aberration-corrected scanning transmission electron microscopy is employed to investigate the morphology of Au clusters formed from the aggregation of single atoms sputtered onto an amorphous carbon surface. The morphologies of surface-assembled clusters of N > 100 atoms are referenced against the morphologies of size-selected clusters determined from previously published results. We observe that surface-assembled clusters (at the conditions employed here) are approximately spherical in shape. The structural isomers of the imaged clusters have also been identified, and the distribution of structural types is broadly in agreement with those from size-selected cluster deposition sources. For clusters of approximately 147 atoms, we find a preference for icosahedra over decahedra and truncated octahedra, but at this size there is a high proportion of unidentified/amorphous structures. At around 309 atoms, we find a preference for decahedra over icosahedra and truncated octahedra, but over half the structures remain unidentifiable/amorphous. For sizes above approximately 561 atoms we are able to identify most of the structures, and find decahedra are still the most favoured, although in competition with single-crystal fcc morphologies. The similarity in structure between surface-assembled and size-selected clusters from a cluster source provides evidence of the relevance of size-selected cluster studies to clusters synthesised by other, industrially relevant, methodologies.

Ultralow Catalytic Loading for Optimised Electrocatalytic Performance of AuPt Nanoparticles to Produce Hydrogen and Ammonia.

The hydrogen evolution and nitrite reduction reactions are key to producing green hydrogen and ammonia. Antenna-reactor nanoparticles hold promise to improve the performances of these transformations under visible-light excitation, by combining plasmonic and catalytic materials. However, current materials involve compromising either on the catalytic activity or the plasmonic enhancement and also lack control of reaction selectivity. Here, we demonstrate that ultralow loadings and non-uniform surface segregation of the catalytic component optimize catalytic activity and selectivity under visible-light irradiation. Taking Pt-Au as an example we find that fine-tuning the Pt content produces a 6-fold increase in the hydrogen evolution compared to commercial Pt/C as well as a 6.5-fold increase in the nitrite reduction and a 2.5-fold increase in the selectivity for producing ammonia under visible light excitation relative to dark conditions. Density functional theory suggests that the catalytic reactions are accelerated by the intimate contact between nanoscale Pt-rich and Au-rich regions at the surface, which facilitates the formation of electron-rich hot-carrier puddles associated with the Pt-based active sites. The results provide exciting opportunities to design new materials with improved photocatalytic performance for sustainable energy applications.

Diabetes mellitus does not alter mortality or hospitalisation risk in patients with newly diagnosed heart failure with preserved ejection fraction: Time to rethink pathophysiological models of disease progression.

INTRODUCTION: Type 2 diabetes is a common and adverse prognostic co-morbidity for patients with heart failure with reduced ejection fraction (HFrEF). The effect of diabetes on long-term outcomes for heart failure with preserved ejection fraction (HFpEF) is less established. METHODS: Prospective cohort study of patients referred to a regional HF clinic with newly diagnosed with HFrEF and HFpEF according to the 2016 European Society of Cardiology guidelines. The association between diabetes, all-cause mortality and hospitalisation was quantified using Kaplan-Meier or Cox regression analysis. RESULTS: Between 1st May 2012 and 1st May 2013, of 960 unselected consecutive patients referred with suspected HF, 464 and 314 patients met the criteria for HFpEF and HFrEF respectively. Within HFpEF and HFrEF groups, patients with diabetes were more frequently male and in both groups patients with diabetes were more likely to be treated with ß-adrenoceptor antagonists and angiotensin converting enzyme inhibitors. After adjustment for age, sex, medical therapy and co-morbidities, diabetes was associated with increased mortality in individuals with HFrEF (HR 1.46 95% CI: 1.05-2.02; p = .023), but not in those with HFpEF (HR 1.26 95% CI 0.92-1.72; p = .146). CONCLUSION: In unselected patients with newly diagnosed HF, diabetes is not an adverse prognostic marker in patients with HFpEF, but is in HFrEF.

In Situ Single Particle Reconstruction Reveals 3D Evolution of PtNi Nanocatalysts During Heating.

Tailoring nanoparticles' composition and morphology is of particular interest for improving their performance for catalysis. A challenge of this approach is that the nanoparticles' optimized initial structure often changes during use. Visualizing the three dimensional (3D) structural transformation in situ is therefore critical, but often prohibitively difficult experimentally. Although electron tomography provides opportunities for 3D imaging, restrictions in the tilt range of in situ holders together with electron dose considerations limit the possibilities for in situ electron tomography studies. Here, an in situ 3D imaging methodology is presented using single particle reconstruction (SPR) that allows 3D reconstruction of nanoparticles with controlled electron dose and without tilting the microscope stage. This in situ SPR methodology is employed to investigate the restructuring and elemental redistribution within a population of PtNi nanoparticles at elevated temperatures. The atomic structure of PtNi is further examined and a heat-induced transition is found from a disordered to an ordered phase. Changes in structure and elemental distribution are linked to a loss of catalytic activity in the oxygen reduction reaction. The in situ SPR methodology employed here can be extended to a wide range of in situ studies employing not only heating, but gaseous, aqueous, or electrochemical environments to reveal in-operando nanoparticle evolution in 3D.

Frame-by-frame observations of structure fluctuations in single mass-selected Au clusters using aberration-corrected electron microscopy.

The multi-dimensional potential energy surface (PES) of a nanoparticle, such as a bare cluster of metal atoms, controls both the structure and dynamic behaviour of the particle. These properties are the subject of numerous theoretical simulations. However, quantitative experimental measurements of critical PES parameters are needed to regulate the models employed in the theoretical work. Experimental measurements of parameters are currently few in number, while model parameters taken from bulk systems may not be suitable for nanosystems. Here we describe a new measurement methodology, in which the isomer structures of a single deposited nanocluster are obtained frame-by-frame in an aberration-corrected scanning transmission electron microscope (ac-STEM) in high angle annular dark field (HAADF) mode. Several gold clusters containing 309 ± 15 atoms were analysed individually after deposition from a mass-selected cluster source onto an amorphous carbon film. The main isomers identified are icosahedral (Ih), decahedral (Dh) and face-centred-cubic (fcc) (the bulk structure), alongside many amorphous (glassy) structures. The results, which are broadly consistent with static ac-STEM measurements of an ensemble of such clusters, open the way to dynamic measurements of many different nanoparticles of diverse sizes, shapes and compositions.

Bridging imaging users to imaging analysis - A community survey.

The 'Bridging Imaging Users to Imaging Analysis' survey was conducted in 2022 by the Center for Open Bioimage Analysis (COBA), BioImaging North America (BINA) and the Royal Microscopical Society Data Analysis in Imaging Section (RMS DAIM) to understand the needs of the imaging community. Through multichoice and open-ended questions, the survey inquired about demographics, image analysis experiences, future needs and suggestions on the role of tool developers and users. Participants of the survey were from diverse roles and domains of the life and physical sciences. To our knowledge, this is the first attempt to survey cross-community to bridge knowledge gaps between physical and life sciences imaging. Survey results indicate that respondents' overarching needs are documentation, detailed tutorials on the usage of image analysis tools, user-friendly intuitive software, and better solutions for segmentation, ideally in a format tailored to their specific use cases. The tool creators suggested the users familiarise themselves with the fundamentals of image analysis, provide constant feedback and report the issues faced during image analysis while the users would like more documentation and an emphasis on tool friendliness. Regardless of the computational experience, there is a strong preference for 'written tutorials' to acquire knowledge on image analysis. We also observed that the interest in having 'office hours' to get an expert opinion on their image analysis methods has increased over the years. The results also showed less-than-expected usage of online discussion forums in the imaging community for solving image analysis problems. Surprisingly, we also observed a decreased interest among the survey respondents in deep/machine learning despite the increasing adoption of artificial intelligence in biology. In addition, the community suggests the need for a common repository for the available image analysis tools and their applications. The opinions and suggestions of the community, released here in full, will help the image analysis tool creation and education communities to design and deliver the resources accordingly.

Risks of Ventricular Arrhythmia and Heart Failure in Carriers of RBM20 Variants.

BACKGROUND: Variants in RBM20 are reported in 2% to 6% of familial cases of dilated cardiomyopathy and may be associated with fatal ventricular arrhythmia and rapid heart failure progression. We sought to determine the risk of adverse events in RBM20 variant carriers and the impact of sex on outcomes. METHODS: Consecutive probands and relatives carrying RBM20 variants were retrospectively recruited from 12 cardiomyopathy units. The primary end point was a composite of malignant ventricular arrhythmia (MVA) and end-stage heart failure (ESHF). MVA and ESHF end points were also analyzed separately and men and women compared. Left ventricular ejection fraction (LVEF) contemporary to MVA was examined. RBM20 variant carriers with left ventricular systolic dysfunction (RBM20LVSD) were compared with variant-elusive patients with idiopathic left ventricular systolic dysfunction. RESULTS: Longitudinal follow-up data were available for 143 RBM20 variant carriers (71 men; median age, 35.5 years); 7 of 143 had an MVA event at baseline. Thirty of 136 without baseline MVA (22.0%) reached the primary end point, and 16 of 136 (11.8%) had new MVA with no significant difference between men and women (log-rank P=0.07 and P=0.98, respectively). Twenty of 143 (14.0%) developed ESHF (17 men and 3 women; log-rank P<0.001). Four of 10 variant carriers with available LVEF contemporary to MVA had an LVEF >35%. At 5 years, 15 of 67 (22.4%) RBM20LVSD versus 7 of 197 (3.6%) patients with idiopathic left ventricular systolic dysfunction had reached the primary end point (log-rank P<0.001). RBM20 variant carriage conferred a 6.0-fold increase in risk of the primary end point. CONCLUSIONS: RBM20 variants are associated with a high risk of MVA and ESHF compared with idiopathic left ventricular systolic dysfunction. The risk of MVA in male and female RBM20 variant carriers is similar, but male sex is strongly associated with ESHF.

Chemical Kinetics of Metal Single Atom and Nanocluster Formation on Surfaces: An Example of Pt on Hexagonal Boron Nitride.

The production of atomically dispersed metal catalysts remains a significant challenge in the field of heterogeneous catalysis due to coexistence with continuously packed sites such as nanoclusters and nanoparticles. This work presents a comprehensive guidance on how to increase the degree of atomization through a selection of appropriate experimental conditions and supports. It is based on a rigorous macro-kinetic theory that captures relevant competing processes of nucleation and formation of single atoms stabilized by point defects. The effects of metal-support interactions and deposition parameters on the resulting single atom to nanocluster ratio as well as the role of metal centers formed on point defects in the kinetics of nucleation have been established, thus paving the way to guided synthesis of single atom catalysts. The predictions are supported by experimental results on sputter deposition of Pt on exfoliated hexagonal boron nitride, as imaged by aberration-corrected scanning transmission electron microscopy.

Bridging Imaging Users to Imaging Analysis - A community survey.

The "Bridging Imaging Users to Imaging Analysis" survey was conducted in 2022 by the Center for Open Bioimage Analysis (COBA), Bioimaging North America (BINA), and the Royal Microscopical Society Data Analysis in Imaging Section (RMS DAIM) to understand the needs of the imaging community. Through multi-choice and open-ended questions, the survey inquired about demographics, image analysis experiences, future needs, and suggestions on the role of tool developers and users. Participants of the survey were from diverse roles and domains of the life and physical sciences. To our knowledge, this is the first attempt to survey cross-community to bridge knowledge gaps between physical and life sciences imaging. Survey results indicate that respondents' overarching needs are documentation, detailed tutorials on the usage of image analysis tools, user-friendly intuitive software, and better solutions for segmentation, ideally in a format tailored to their specific use cases. The tool creators suggested the users familiarize themselves with the fundamentals of image analysis, provide constant feedback, and report the issues faced during image analysis while the users would like more documentation and an emphasis on tool friendliness. Regardless of the computational experience, there is a strong preference for 'written tutorials' to acquire knowledge on image analysis. We also observed that the interest in having 'office hours' to get an expert opinion on their image analysis methods has increased over the years. In addition, the community suggests the need for a common repository for the available image analysis tools and their applications. The opinions and suggestions of the community, released here in full, will help the image analysis tool creation and education communities to design and deliver the resources accordingly.

Subnanometer-Wide Indium Selenide Nanoribbons.

Indium selenides (InxSey) have been shown to retain several desirable properties, such as ferroelectricity, tunable photoluminescence through temperature-controlled phase changes, and high electron mobility when confined to two dimensions (2D). In this work we synthesize single-layer, ultrathin, subnanometer-wide InxSey by templated growth inside single-walled carbon nanotubes (SWCNTs). Despite the complex polymorphism of InxSey we show that the phase of the encapsulated material can be identified through comparison of experimental aberration-corrected transmission electron microscopy (AC-TEM) images and AC-TEM simulations of known structures of InxSey. We show that, by altering synthesis conditions, one of two different stoichiometries of sub-nm InxSey, namely InSe or ß-In2Se3, can be prepared. Additionally, in situ AC-TEM heating experiments reveal that encapsulated ß-In2Se3 undergoes a phase change to γ-In2Se3 above 400 °C. Further analysis of the encapsulated species is performed using X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), energy dispersive X-ray analysis (EDX), and Raman spectroscopy, corroborating the identities of the encapsulated species. These materials could provide a platform for ultrathin, subnanometer-wide phase-change nanoribbons with applications as nanoelectronic components.

Transcoronary electrophysiological parameters in patients undergoing elective and acute coronary intervention.

INTRODUCTION: Percutaneous coronary intervention is performed routinely in the management of myocardial infarction with obstructive coronary disease, but intervention to arteries supplying nonviable myocardium may be harmful. It is important therefore to establish myocardial viability, and there is an unmet need in current clinical practice for real time viability assessment to aid in decision making. Transcoronary pacing to assess myocardial electrophysiological parameters may be a novel viability assessment technique which could be used in this regard. METHODS: Coronary intervention was carried out according to standard departmental procedure with standard equipment. An exchange length coronary guidewire was passed into both target and reference coronary vessels and an over-the-wire balloon or microcatheter was used to insulate the guidewire and allow electrophysiological parameters to be assessed. Readings were obtained from all major epicardial vessels and substantial branches. At each position, an intracoronary electrocardiogram was recorded, and R wave amplitude was measured. Transcoronary pacing was then performed to establish threshold and impedance for each myocardial segment. A viability cardiac MRI scan was performed for each patient. A standard segmental model was used to determine viability in each segment using an 'infarct score' based on degree of late gadolinium enhancement. Studies were reported blinded to the electrical parameters obtained from the coronary guidewire. The primary outcome was the relationship between pacing threshold and myocardial segment infarct score. Secondary outcomes included the relationship between segmental infarct score and R wave height, and between segmental infarct score and pacing impedance. Data were collected on the feasibility of studying the coronary segments as well as safety. RESULTS: Sixty-five patients presenting with stable coronary artery disease or acute coronary syndromes to Leeds General Infirmary between September 2019 and August 2021 were included in the study. Electrophysiological parameters from segments with an infarct score of zero were obtained, with wide variances seen, with no significant difference in impedance or threshold in any territory. There was a significant difference in sensitivity for segments in the right coronary artery territory for both elective and acute patients. This likely relates to reduced myocardial mass in these territories. No significant association between infarct score and sensitivity, impedance or threshold were seen. CONCLUSION: This study has established intracoronary electrophysiological parameters in both normal myocardium and areas of myocardial scar. No reliable association was seen between impedance, threshold or R wave amplitude and degree of myocardial viability, contrasting with prior findings from our group and others. More work is therefore required to fully understand the role of transcoronary pacing in this setting.

Cd/Pt Precursor Solution for Solar H2 Production and in situ Photochemical Synthesis of Pt Single-atom Decorated CdS Nanoparticles.

Despite extensive efforts to develop high-performance H2 evolution catalysts, this remains a major challenge. Here, we demonstrate the use of Cd/Pt precursor solutions for significant photocatalytic H2 production (154.7 mmol g-1 h-1 ), removing the need for a pre-synthesized photocatalyst. In addition, we also report simultaneous in situ synthesis of Pt single-atoms anchored CdS nanoparticles (PtSA -CdSIS ) during photoirradiation. The highly dispersed in situ incorporation of extensive Pt single atoms on CdSIS enables the enhancement of active sites and suppresses charge recombination, which results in exceptionally high solar-to-hydrogen conversion efficiency of ≈1 % and an apparent quantum yield of over 91 % (365 nm) for H2 production. Our work not only provides a promising strategy for maximising H2 production efficiency but also provides a green process for H2 production and the synthesis of highly photoactive PtSA -CdSIS nanoparticles.

Influence of air exposure on structural isomers of silver nanoparticles.

Up to date, the influence of ambient air exposure on the energetics and stability of silver clusters has rarely been investigated and compared to clusters in vacuum. Silver clusters up to 3000 atoms in size, on an amorphous carbon film, have been exposed to ambient air and investigated by atomic-resolution imaging in the aberration-corrected Scanning Transmission Electron Microscope. Ordered structures comprise more than half the population, the rest are amorphous. Here, we show that the most common ordered isomer structures is the icosahedron. These results contrast with the published behaviour of silver clusters protected from atmospheric exposure, where the predominant ordered isomer is face-centred cubic. We propose that the formation of surface oxide or sulphide species resulting from air exposure can account for this deviation in stable isomer. This interpretation is consistent with density functional theory calculations based on silver nanoclusters, in the size range 147-201 atoms, on which methanethiol molecules are adsorbed. An understanding of the effects of ambient exposure on the atomic structure and therefore functional properties of nanoparticles is highly relevant to their real-world performance and applications.

Guideline-directed medical therapy is similarly effective in heart failure with mildly reduced ejection fraction.

AIMS: Current guidelines recommend that disease-modifying pharmacological therapies may be considered for patients who have heart failure with mildly reduced ejection fraction (HFmrEF). We aimed to describe the characteristics, outcomes, provision of pharmacological therapies and dose-related associations with mortality risk in HFmrEF. METHODS AND RESULTS: We explored data from two prospective observational studies, which permitted the examination of the effects of pharmacological therapies across a broad spectrum of left ventricular ejection fraction (LVEF). The combined dataset consisted of 2388 unique patients, with a mean age of 73.7 ± 13.2 years of whom 1525 (63.9%) were male. LVEF ranged from 5 to 71% (mean 37.2 ± 12.8%) and 1504 (63.0%) were categorised as having reduced ejection fraction (HFrEF), 421 (17.6%) as HFmrEF and 463 (19.4%) as preserved ejection fraction (HFpEF). Patients with HFmrEF more closely resembled HFrEF than HFpEF. Adjusted all-cause mortality risk was lower in HFmrEF (hazard ratio [HR] 0.86 (95% confidence interval [CI] 0.74-0.99); p = 0.040) and in HFpEF (HR 0.61 (95% CI 0.52-0.71); p < 0.001) compared to HFrEF. Adjusted all-cause mortality risk was lower in patients with HFrEF and HFmrEF who received the highest doses of beta-blockers or renin-angiotensin inhibitors. These associations were not evident in HFpEF. Once adjusted for relevant confounders, each mg equivalent of bisoprolol (HR 0.95 [95% CI 0.91-1.00]; p = 0.047) and ramipril (HR 0.95 [95%CI 0.90-1.00]; p = 0.044) was associated with incremental reductions in mortality risk in patients with HFmrEF. CONCLUSIONS: Pharmacological therapies were associated with lower mortality risk in HFmrEF, supporting guideline recommendations which extend the indications of these agents to all patients with LVEF < 50%. HFmrEF more closely resembles HFrEF in terms of clinical characteristics and outcomes. Pharmacological therapies are associated with lower mortality risk in HFmrEF and HFrEF, but not in HFpEF.

Methanol synthesis from CO2 and H2 using supported Pd alloy catalysts.

A number of Pd based materials have been synthesised and evaluated as catalysts for the conversion of carbon dioxide and hydrogen to methanol, a useful platform chemical and hydrogen storage molecule. Monometallic Pd catalysts show poor methanol selectivity, but this is improved through the formation of Pd alloys, with both PdZn and PdGa alloys showing greatly enhanced methanol productivity compared with monometallic Pd/Al2O3 and Pd/TiO2 catalysts. Catalyst characterisation shows that the 1 : 1 ß-PdZn alloy is present in all Zn containing post-reaction samples, including PdZn/Ga2O3, with the Pd2Ga alloy formed for the Pd/Ga2O3 sample. The heat of mixing was calculated for a variety of alloy compositions with high values determined for both PdZn and Pd2Ga alloys, at ca. -0.6 eV per atom and ca. -0.8 eV per atom, respectively. However, ZnO is more readily reduced than Ga2O3, providing a possible explanation for the preferential formation of the PdZn alloy, rather than PdGa, when in the presence of Ga2O3.

Shielding during medical training: an exploration of effects, consequences and best practices.

Background: Shielding during the COVID-19 pandemic impacted postgraduate medical training, likely affecting between 7% and 14% of trainees. We examine the burden of shielding on this cohort and provide strategies for future working practices. Methods: Seventeen postgraduate doctors in training took part in non-incentivised, virtual focus groups or interviews. Focus group content underwent thematic analysis. Results were validated in subsequent focused interviews. Results: Shielding trainees reported guilt, limited support and occasionally stigmatisation. Rotational changes and returning to work were also difficult and led to contractual challenges. Departmental support, IT provision and proactivity were key to successful shielding. Early discussion with training bodies was deemed essential to plan objective onward progression. Conclusion: As we enter an era of endemic COVID-19, adjusted working practices will continue. Embedding successful working practices for shielding at national and local levels will minimise the long-term impact on postgraduate medical training.

Enhanced H2O2 Production via Photocatalytic O2 Reduction over Structurally-Modified Poly(heptazine imide).

Solar H2O2 produced by O2 reduction provides a green, efficient, and ecological alternative to the industrial anthraquinone process and H2/O2 direct-synthesis. We report efficient photocatalytic H2O2 production at a rate of 73.4 mM h-1 in the presence of a sacrificial donor on a structurally engineered catalyst, alkali metal-halide modulated poly(heptazine imide) (MX → PHI). The reported H2O2 production is nearly 150 and >4250 times higher than triazine structured pristine carbon nitride under UV-visible and visible light (≥400 nm) irradiation, respectively. Furthermore, the solar H2O2 production rate on MX → PHI is higher than most of the previously reported carbon nitride (triazine, tri-s-triazine), metal oxides, metal sulfides, and other metal-organic photocatalysts. A record high AQY of 96% at 365 nm and 21% at 450 nm was observed. We find that structural modulation by alkali metal-halides results in a highly photoactive MX → PHI catalyst which has a broader light absorption range, enhanced light absorption ability, tailored bandgap, and a tunable band edge position. Moreover, this material has a different polymeric structure, high O2 trapping ability, interlayer intercalation, as well as surface decoration of alkali metals. The specific C≡N groups and surface defects, generated by intercalated MX, were also considered as potential contributors to the separation of photoinduced electron-hole pairs, leading to enhanced photocatalytic activity. A synergy of all these factors contributes to a higher H2O2 production rate. Spectroscopic data help us to rationalize the exceptional photochemical performance and structural characteristics of MX → PHI.

Atrial fibrillation and risk of progressive heart failure in patients with preserved ejection fraction heart failure.

AIMS: Understanding of the pathophysiology of progressive heart failure (HF) in patients with heart failure with preserved ejection fraction (HFpEF) is incomplete. We sought to identify factors differentially associated with risk of progressive HF death and hospitalization in patients with HFpEF compared with patients with HF and reduced ejection fraction (HFrEF). METHODS AND RESULTS: Prospective cohort study of patients newly referred to secondary care with suspicion of HF, based on symptoms and signs of HF and elevated natriuretic peptides (NP), followed up for a minimum of 6 years. HFpEF and HFrEF were diagnosed according to the 2016 European Society of Cardiology guidelines. Of 960 patients referred, 467 had HFpEF (49%), 311 had HFrEF (32%), and 182 (19%) had neither. Atrial fibrillation (AF) was found in 37% of patients with HFpEF and 34% with HFrEF. During 6 years follow-up, 19% of HFrEF and 14% of HFpEF patients were hospitalized or died due to progressive HF, hazard ratio (HR) 0.67 (95% CI: 0.47-0.96; P = 0.028). AF was the only marker that was differentially associated with progressive HF death or hospitalization in patients with HFpEF HR 2.58 (95% CI: 1.59-4.21; P < 0.001) versus HFrEF HR 1.11 (95% CI: 0.65-1.89; P = 0.7). CONCLUSIONS: De novo patients diagnosed with HFrEF have greater risk of death or hospitalization due to progressive HF than patients with HFpEF. AF is associated with increased risk of progressive HF death or hospitalization in HFpEF but not HFrEF, raising the intriguing possibility that this may be a novel therapeutic target in this growing population.