An Evaluation of Autologous Fat Injection as a Treatment for Velopharyngeal Insufficiency: A Review and Integrated Data Analysis.

BACKGROUND: Velopharyngeal insufficiency (VPI) is a condition characterized by incomplete separation of the oral and nasal cavities during speech production, thereby leading to speech abnormalities and audible nasal emissions. Subsequently, this adversely impacts communication and potentially interpersonal social interactions. Autologous fat grafting (AFG) to the velopharynx, a minimally invasive technique, aims to improve oronasal separation by providing bulk and advancing the posterior pharyngeal wall toward the soft palate. Despite its potential, the relative novelty of AFG in treating VPI has resulted in reporting of inconsistent indications, varied surgical techniques, and mixed outcomes across existing literature. METHODS: This systemic review examined the evidence of AFG for VPI treatment over the past decade (2013-2023). A thorough search across five electronic databases yielded 233 studies, with 20 meeting the inclusion criteria (e.g., utilized fat injection as their selected VPI treatment, conducted study in human subjects, did not perform additional surgical procedure at time of fat injection). Selected studies encompassed patient and surgical intervention characteristics, perceptual speech assessment (PSA) scores, gap sizes, nasalance measurements, and complications. RESULTS: The majority of patients had a prior cleft palate diagnosis (78.2%), in which nasoendoscopy was the prevalent method for visualizing the velopharyngeal port defect. Fat harvesting predominantly occurred from the abdomen (64.3%), with an average injection volume of 6.3 mL across studies. PSA and subjective gap size scores were consistently higher preoperatively than postoperatively. PSA score analysis from seven studies revealed significant and sustained improvements postoperatively. Gap size score analysis from four studies demonstrated similar preoperative and postoperative differences. Complications were reported in 17 studies, yielding a 2.7% summative complication rate among 594 cases. CONCLUSIONS: Autologous fat grafting has emerged as a minimally invasive, safe, and effective treatment for mild to moderate VPI. However, challenges remain because of variability in patient selection criteria, diagnostic modalities, and outcome measurements. This review underscores the need for randomized control trials to directly compare AFG with standard-of-care surgical interventions, providing more conclusive evidence of its clinical efficacy.

Nasopharyngoscopic Evaluation of Velopharyngeal Closure During Speech.

Definitive oronasal separation through closure of the velopharyngeal (VP) sphincter is necessary for the development of normal speech and feeding. Individuals with velopharyngeal incompetence or insufficiency often exhibit hypernasal speech, poor speech intelligibility, and nasal regurgitation. Assessment of VP sphincter function using nasopharyngoscopy is a key element in identifying VP dysfunction. A foundational understanding of normal anatomy and physiology of the velopharyngeal mechanism is paramount to successful diagnosis. This includes recognition of 4 distinct VP sphincter closure patterns: coronal, sagittal, circular, and circular with Passavant's ridge. In this study, the authors showcase 2 patients with velopharyngeal competence who presented to an ear, nose, and throat clinic for nasopharyngoscopic evaluation. This study sought to demonstrate the use of nasopharyngoscopy to recognize velopharyngeal closure patterns and discuss how they may influence the surgical management of VP dysfunction.

What a Ratchet! A Gripping Case Report of an Entrapped Finger with an Unyielding Wrench.

Finger entrapment with rings or ring-like objects is an uncommon possible hand emergency. In cases in which noncutting removal is ineffective, ring cutters or dental drills with carbide or diamond burs have been successfully used. However, objects composed of hard metallic alloys, such as lug nuts or wrenches, are often resistant to such equipment. In these instances, larger diameter metal cutting burrs or rasps may be more advantageous. Due to their increased size and cutting power, these tools are better suited to handle the toughness of hard metals. In this case report, we present the effective and efficient removal of a stainless steel wrench from an entrapped digit using a helicoidal rasp. Availability of this instrument within orthopedic departments may prevent the delays often described in the treatment of finger entrapment when traditional cutting equipment fails.

Application of 3D Printing in Cleft Lip and Palate Repair.

This manuscript reviews the transformative impact of 3-dimensional (3D) printing technologies in the treatment and management of cleft lip and palate (CLP), highlighting its application across presurgical planning, surgical training, implantable scaffolds, and postoperative care. By integrating patient-specific data through computer-aided design and manufacturing, 3D printing offers tailored solutions that improve surgical outcomes, reduce operation times, and enhance patient care. The review synthesizes current research findings, technical advancements, and clinical applications, illustrating the potential of 3D printing to revolutionize CLP treatment. Further, it discusses the future directions of combining 3D printing with other innovative technologies like artificial intelligence, 4D printing, and in situ bioprinting for more comprehensive care strategies. This paper underscores the necessity for multidisciplinary collaboration and further research to overcome existing challenges and fully utilize the capabilities of 3D printing in CLP repair.

A rhPDGF-BB/bovine type I collagen/ß-TCP mixture for the treatment of critically sized non-union tibial defects: An in vivo study in rabbits.

Non-union during healing of bone fractures affects up to ~5% of patients worldwide. Given the success of recombinant human platelet-derived growth factor-B chain homodimer (rhPDGF-BB) in promoting angiogenesis and bone fusion in the hindfoot and ankle, rhPDGF-BB combined with bovine type I collagen/ß-TCP matrix (AIBG) could serve as a viable alternative to autografts in the treatment of non-unions. Defects (~2 mm gaps) were surgically induced in tibiae of skeletally mature New Zealand white rabbits. Animals were allocated to one of four groups-(1) negative control (empty defect, healing for 8 weeks), (2 and 3) acute treatment with AIBG (healing for 4 or 8 weeks), and (4) chronic treatment with AIBG (injection 4 weeks post defect creation and then healing for 8 weeks). Bone formation was analyzed qualitatively and semi-quantitatively through histology. Samples were imaged using dual-energy X-ray absorptiometry and computed tomography for defect visualization and volumetric reconstruction, respectively. Delayed healing or non-healing was observed in the negative control group, whereas defects treated with AIBG in an acute setting yielded bone formation as early as 4 weeks with bone growth appearing discontinuous. At 8 weeks (acute setting), substantial remodeling was observed with higher degrees of bone organization characterized by appositional bone growth. The chronic healing, experimental, group yielded bone formation and remodeling, with no indication of non-union after treatment with AIBG. Furthermore, bone growth in the chronic healing group was accompanied by an increased presence of osteons, osteonal canals, and interstitial lamellae. Qualitatively and semiquantitatively, chronic application of AI facilitated complete bridging of the induced non-union defects, while untreated defects or defects treated acutely with AIBG demonstrated a lack of complete bridging at 8 weeks.

3D printed ß-tricalcium phosphate versus synthetic bone mineral scaffolds: A comparative in vitro study of biocompatibility.

BACKGROUND: ß-tricalcium phosphate (ß-TCP) has been successfully utilized as a 3D printed ceramic scaffold in the repair of non-healing bone defects; however, it requires the addition of growth factors to augment its regenerative capacity. Synthetic bone mineral (SBM) is a novel and extrudable carbonate hydroxyapatite with ionic substitutions known to facilitate bone healing. However, its efficacy as a 3D printed scaffold for hard tissue defect repair has not been explored. OBJECTIVE: To evaluate the biocompatibility and cell viability of human osteoprecursor (hOP) cells seeded on 3D printed SBM scaffolds via in vitro analysis. METHODS: SBM and ß-TCP scaffolds were fabricated via 3D printing and sintered at various temperatures. Scaffolds were then subject to qualitative cytotoxicity testing and cell proliferation experiments utilizing (hOP) cells. RESULTS: SBM scaffolds sintered at lower temperatures (600 °C and 700 °C) induced greater levels of acute cellular stress. At higher sintering temperatures (1100 °C), SBM scaffolds showed inferior cellular viability relative to ß-TCP scaffolds sintered to the same temperature (1100 °C). However, qualitative analysis suggested that ß-TCP presented no evidence of morphological change, while SBM 1100 °C showed few instances of acute cellular stress. CONCLUSION: Results demonstrate SBM may be a promising alternative to ß-TCP for potential applications in bone tissue engineering.

Nonthermal Atmospheric Pressure Plasma Treatment of Endosteal Implants for Osseointegration and Antimicrobial Efficacy: A Comprehensive Review.

The energy state of endosteal implants is dependent on the material, manufacturing technique, cleaning procedure, sterilization method, and surgical manipulation. An implant surface carrying a positive charge renders hydrophilic properties, thereby facilitating the absorption of vital plasma proteins crucial for osteogenic interactions. Techniques to control the surface charge involve processes like oxidation, chemical and topographical adjustments as well as the application of nonthermal plasma (NTP) treatment. NTP at atmospheric pressure and at room temperature can induce chemical and/or physical reactions that enhance wettability through surface energy changes. NTP has thus been used to modify the oxide layer of endosteal implants that interface with adjacent tissue cells and proteins. Results have indicated that if applied prior to implantation, NTP strengthens the interaction with surrounding hard tissue structures during the critical phases of early healing, thereby promoting rapid bone formation. Also, during this time period, NTP has been found to result in enhanced biomechanical fixation. As such, the application of NTP may serve as a practical and reliable method to improve healing outcomes. This review aims to provide an in-depth exploration of the parameters to be considered in the application of NTP on endosteal implants. In addition, the short- and long-term effects of NTP on osseointegration are addressed, as well as recent advances in the utilization of NTP in the treatment of periodontal disease.

Sustained Release of Salicylic Acid for Halting Peri-Implantitis Progression in Healthy and Hyperglycemic Systemic Conditions: A Gottingen Minipig Model.

To develop a peri-implantitis model in a Gottingen minipig and evaluate the effect of local application of salicylic acid poly(anhydride-ester) (SAPAE) on peri-implantitis progression in healthy, metabolic syndrome (MS), and type-2 diabetes mellitus (T2DM) subjects. Eighteen animals were allocated to three groups: (i) control, (ii) MS (diet for obesity induction), and (iii) T2DM (diet plus streptozotocin for T2DM induction). Maxillary and mandible premolars and first molar were extracted. After 3 months of healing, four implants per side were placed in both jaws of each animal. After 2 months, peri-implantitis was induced by plaque formation using silk ligatures. SAPAE polymer was mixed with mineral oil (3.75 mg/µL) and topically applied biweekly for up to 60 days to halt peri-implantitis progression. Periodontal probing was used to assess pocket depth over time, followed by histomorphologic analysis of harvested samples. The adopted protocol resulted in the onset of peri-implantitis, with healthy minipigs taking twice as long to reach the same level of probing depth relative to MS and T2DM subjects (∼3.0 mm), irrespective of jaw. In a qualitative analysis, SAPAE therapy revealed decreased levels of inflammation in the normoglycemic, MS, and T2DM groups. SAPAE application around implants significantly reduced the progression of peri-implantitis after ∼15 days of therapy, with ∼30% lower probing depth for all systemic conditions and similar rates of probing depth increase per week between the control and SAPAE groups. MS and T2DM conditions presented a faster progression of the peri-implant pocket depth. SAPAE treatment reduced peri-implantitis progression in healthy, MS, and T2DM groups.

The Aesthetic Surgery Education and Research Foundation (ASERF): A 30-Year Retrospective Analysis.

Federal government research grants provide limited funding to plastic surgeon-scientists, with reconstructive research taking precedence over aesthetic research. The Aesthetic Surgery Education and Research Foundation (ASERF) is a nonprofit, 501(c)(3) organization that seeks to support innovative, diverse research endeavors within aesthetic surgery. A total of 130 ASERF-funded studies and 32 non-funded applications from 1992 to 2022 were reviewed. Kruskal Wallis, Fisher's exact, and chi-squared tests were utilized to assess the potential relationship between self-identified gender, practice setting, geographical location, and study type with individual grant amounts and grant funding decision. Although significant differences were observed between male and female grant recipient h-indices (P < .05), there were no differences in the amount of funding they received (P > .05). Grant amounts were also consistent between study types as well as principal investigator practice settings and geographical locations (P > .05). The subanalysis revealed that the practice setting of the primary investigator (PI) was the only variable to exhibit a significant association with the decision to award funding (P < .05). Further, of the 61 applicants between 2017 and 2022, only 2 PIs self-identified as female. ASERF serves as an excellent funding source for global aesthetic surgery. To promote further research diversification, increased emphasis should be placed on recruiting applicants from outside academia and those who identify as female or gender nonbinary.

Bone Tissue Engineering (BTE) of the Craniofacial Skeleton, Part II: Translational Potential of 3D-Printed Scaffolds for Defect Repair.

Computer-aided design/computer-aided manufacturing and 3-dimensional (3D) printing techniques have revolutionized the approach to bone tissue engineering for the repair of craniomaxillofacial skeletal defects. Ample research has been performed to gain a fundamental understanding of the optimal 3D-printed scaffold design and composition to facilitate appropriate bone formation and healing. Benchtop and preclinical, small animal model testing of 3D-printed bioactive ceramic scaffolds augmented with pharmacological/biological agents have yielded promising results given their potential combined osteogenic and osteoinductive capacity. However, other factors must be evaluated before newly developed constructs may be considered analogous alternatives to the "gold standard" autologous graft for defect repair. More specifically, the 3D-printed bioactive ceramic scaffold's long-term safety profile, biocompatibility, and resorption kinetics must be studied. The ultimate goal is to successfully regenerate bone that is comparable in volume, density, histologic composition, and mechanical strength to that of native bone. In vivo studies of these newly developed bone tissue engineering in translational animal models continue to make strides toward addressing regulatory and clinically relevant topics. These include the use of skeletally immature animal models to address the challenges posed by craniomaxillofacial defect repair in pediatric patients. This manuscript reviews the most recent preclinical animal studies seeking to assess 3D-printed ceramic scaffolds for improved repair of critical-sized craniofacial bony defects.

3D Printing Applications for Craniomaxillofacial Reconstruction: A Sweeping Review.

The field of craniomaxillofacial (CMF) surgery is rich in pathological diversity and broad in the ages that it treats. Moreover, the CMF skeleton is a complex confluence of sensory organs and hard and soft tissue with load-bearing demands that can change within millimeters. Computer-aided design (CAD) and additive manufacturing (AM) create extraordinary opportunities to repair the infinite array of craniomaxillofacial defects that exist because of the aforementioned circumstances. 3D printed scaffolds have the potential to serve as a comparable if not superior alternative to the "gold standard" autologous graft. In vitro and in vivo studies continue to investigate the optimal 3D printed scaffold design and composition to foster bone regeneration that is suited to the unique biological and mechanical environment of each CMF defect. Furthermore, 3D printed fixation devices serve as a patient-specific alternative to those that are available off-the-shelf with an opportunity to reduce operative time and optimize fit. Similar benefits have been found to apply to 3D printed anatomical models and surgical guides for preoperative or intraoperative use. Creation and implementation of these devices requires extensive preclinical and clinical research, novel manufacturing capabilities, and strict regulatory oversight. Researchers, manufacturers, CMF surgeons, and the United States Food and Drug Administration (FDA) are working in tandem to further the development of such technology within their respective domains, all with a mutual goal to deliver safe, effective, cost-efficient, and patient-specific CMF care. This manuscript reviews FDA regulatory status, 3D printing techniques, biomaterials, and sterilization procedures suitable for 3D printed devices of the craniomaxillofacial skeleton. It also seeks to discuss recent clinical applications, economic feasibility, and future directions of this novel technology. By reviewing the current state of 3D printing in CMF surgery, we hope to gain a better understanding of its impact and in turn identify opportunities to further the development of patient-specific surgical care.

Non-Thermal Plasma Treatment of Poly(tetrafluoroethylene) Dental Membranes and Its Effects on Cellular Adhesion.

Non-resorbable dental barrier membranes entail the risk of dehiscence due to their smooth and functionally inert surfaces. Non-thermal plasma (NTP) treatment has been shown to increase the hydrophilicity of a biomaterials and could thereby enhance cellular adhesion. This study aimed to elucidate the role of allyl alcohol NTP treatment of poly(tetrafluoroethylene) in its cellular adhesion. The materials (non-treated PTFE membranes (NTMem) and NTP-treated PTFE membranes (PTMem)) were subjected to characterization using scanning electron microscopy (SEM), contact angle measurements, X-ray photoelectron spectroscopy (XPS), and electron spectroscopy for chemical analysis (ESCA). Cells were seeded upon the different membranes, and cellular adhesion was analyzed qualitatively and quantitatively using fluorescence labeling and a hemocytometer, respectively. PTMem exhibited higher surface energies and the incorporation of reactive functional groups. NTP altered the surface topography and chemistry of PTFE membranes, as seen through SEM, XPS and ESCA, with partial defluorination and polymer chain breakage. Fluorescence labeling indicated significantly higher cell populations on PTMem relative to its untreated counterparts (NTMem). The results of this study support the potential applicability of allyl alcohol NTP treatment for polymeric biomaterials such as PTFE-to increase cellular adhesion for use as dental barrier membranes.

Osteogenic differentiation and reconstruction of mandible defects using a novel resorbable membrane: An in vitro and in vivo experimental study.

To evaluate the cellular response of both an intact fish skin membrane and a porcine-derived collagen membrane and investigate the bone healing response of these membranes using a translational, preclinical, guided-bone regeneration (GBR) canine model. Two different naturally sourced membranes were evaluated in this study: (i) an intact fish skin membrane (Kerecis Oral®, Kerecis) and (ii) a porcine derived collagen (Mucograft®, Geistlich) membrane, positive control. For the in vitro experiments, human osteoprogenitor (hOP) cells were used to assess the cellular viability and proliferation at 24, 48, 72, and 168 h. ALPL, COL1A1, BMP2, and RUNX2 expression levels were analyzed by real-time PCR at 7 and 14 days. The preclinical component was designed to mimic a GBR model in canines (n = 12). The first step was the extraction of premolars (P1-P4) and the 1st molars bilaterally, thereby creating four three-wall box type defects per mandible (two per side). Each defect site was filled with bone grafting material, which was then covered with one of the two membranes (Kerecis Oral® or Mucograft®). The groups were nested within the mandibles of each subject and membranes randomly allocated among the defects to minimize potential site bias. Samples were harvested at 30-, 60-, and 90-days and subjected to computerized microtomography (µCT) for three-dimensional reconstruction to quantify bone formation and graft degradation, in addition to histological processing to qualitatively analyze bone regeneration. Neither the intact fish skin membrane nor porcine-based collagen membrane presented cytotoxic effects. An increase in cell proliferation rate was observed for both membranes, with the Kerecis Oral® outperforming the Mucograft® at the 48- and 168-hour time points. Kerecis Oral® yielded higher ALPL expression relative to Mucograft® at both 7- and 14-day points. Additionally, higher COL1A1 expression was observed for the Kerecis Oral® membrane after 7 days but no differences were detected at 14 days. The membranes yielded similar BMP2 and RUNX2 expression at 7 and 14 days. Volumetric reconstructions and histologic micrographs indicated gradual bone ingrowth along with the presence of particulate bone grafts bridging the defect walls for both Kerecis Oral® and Mucograft® membranes, which allowed for the reestablishment of the mandible shape after 90 days. New bone formation significantly increased from 30 to 60 days, and from 60 to 90 days in vivo, without significant differences between membranes. The amount of bovine grafting material (%) within the defects significantly decreased from 30 to 90 days. Collagen membranes led to an upregulation of cellular proliferation and adhesion along with increased expression of genes associated with bone healing, particularly the intact fish skin membrane. Despite an increase in the bone formation rate in the defect over time, there was no significant difference between the membranes.

Three-Dimensional Printing Bioceramic Scaffolds Using Direct-Ink-Writing for Craniomaxillofacial Bone Regeneration.

Defects characterized as large osseous voids in bone, in certain circumstances, are difficult to treat, requiring extensive treatments which lead to an increased financial burden, pain, and prolonged hospital stays. Grafts exist to aid in bone tissue regeneration (BTR), among which ceramic-based grafts have become increasingly popular due to their biocompatibility and resorbability. BTR using bioceramic materials such as ß-tricalcium phosphate has seen tremendous progress and has been extensively used in the fabrication of biomimetic scaffolds through the three-dimensional printing (3DP) workflow. 3DP has hence revolutionized BTR by offering unparalleled potential for the creation of complex, patient, and anatomic location-specific structures. More importantly, it has enabled the production of biomimetic scaffolds with porous structures that mimic the natural extracellular matrix while allowing for cell growth-a critical factor in determining the overall success of the BTR modality. While the concept of 3DP bioceramic bone tissue scaffolds for human applications is nascent, numerous studies have highlighted its potential in restoring both form and function of critically sized defects in a wide variety of translational models. In this review, we summarize these recent advancements and present a review of the engineering principles and methodologies that are vital for using 3DP technology for craniomaxillofacial reconstructive applications. Moreover, we highlight future advances in the field of dynamic 3D printed constructs via shape-memory effect, and comment on pharmacological manipulation and bioactive molecules required to treat a wider range of boney defects.

Hirschsprung disease in Down syndrome: An opportunity for improvement.

BACKGROUND: Down syndrome (DS) is the most common abnormality associated with Hirschsprung disease (HD). It has been suggested patients with HD and DS have worse outcomes, however the literature is controversial. METHODS: The Kids' Inpatient Database (KID) from 2003 to 2012 was used to identify newborns with HD. Demographics, hospital characteristics, and outcomes were compared among patients with and without DS using standard statistical tests. RESULTS: There were 481 patients identified with HD, of which 45 (9%) had DS. Patients with DS were older at the time of first rectal biopsy (6 [3-11] days vs. 4 [3-6] days, p = 0.012). There were no differences in operative versus non-operative management in patients with and without DS (p = 0.706). Hospital length of stay was longer in the DS cohort (22 [13-33] days vs. 15 [10-24] days, p = 0.019), and patients with DS were more likely to have a concomitant diagnosis of wound infection (<12% vs. 3%, p = 0.002) and necrotizing enterocolitis (<14% vs. 5%, p = 0.018). The mortality rate for patients with DS was four times higher than those without DS (< 5% vs. < 0.8%, p = 0.018). CONCLUSION: In this nationwide cohort of patients with Hirschsprung disease, those with Down syndrome experienced delays in diagnosis and worse outcomes. LEVEL OF EVIDENCE: Level III. TYPE OF STUDY: Treatment study, retrospective comparative study.

Outcomes for Ladd's procedure: Does approach matter?

BACKGROUND: Laparoscopic Ladd's procedure has been proven safe and effective for the treatment of malrotation. However, the nationwide utilization and outcomes of elective Ladd's procedure are largely unknown. METHODS: The Nationwide Readmissions Database from 2010 to 2014 was used to identify patients 0-18 years (excluding newborns) with malrotation who underwent elective Ladd's procedure. Demographics, hospital factors, and outcomes were compared by approach (laparoscopic vs. open) using standard statistical tests and propensity score (PS) matched analysis. Results were weighted for national estimates. RESULTS: 1343 patients (44% male) underwent elective Ladd's procedure via laparoscopic (22%) or open (78%) approach. Laparoscopic approach was more common in large hospitals (26% vs. 16%), patients >13 years (30% vs. 20%), and those with higher income (29% vs. 16%), all p < 0.001. Following PS matching, compared to the laparoscopic approach, open Ladd's was associated with index hospital length of stay > 7 days (20% vs. 8%), more post-operative gastrointestinal dysfunction (12% vs. < 1%), and more nausea, vomiting, and/or diarrhea (16% vs. 6%), all p < 0.001. The overall readmission rates within 30 days and the year of index operation were 8% and 15%, respectively. In the matched cohort, those undergoing laparoscopic Ladd's were less likely to be readmitted than those with the open approach (7% vs. 16%, p < 0.001) and experienced less gastrointestinal issues on readmission (5% vs. 15%, p = 0.002). There were similar rates of post-operative small bowel obstruction (< 3% vs. < 3%, p = 0.840) and volvulus (0% vs. < 1%, p = 0.136). Redo Ladd's procedure was performed in less than 4% of readmissions and all occurred within 5 days of initial hospital discharge. CONCLUSION: The majority of Ladd's procedures in the U.S. are being performed open, despite comparable outcomes following a laparoscopic approach. Readmission rates are similar with either approach, and the rate of redo Ladd's procedure is lower than previously reported. LEVEL OF EVIDENCE: Level III.

Pediatric Gastrostomy Tube Placement: Less Complications Associated with Laparoscopic Approach.

Background: There are few nationwide studies comparing outcomes of open, laparoscopic (LAP), and percutaneous endoscopic (PEG) gastrostomy tube (GT) placement in the pediatric population. Materials and Methods: The Nationwide Readmissions Database from 2010 to 2014 was used to identify patients ≤18 years (excluding newborns) who underwent GT placement. Demographics, hospital characteristics, and outcomes were compared by the GT approach. Results: There were 3278 patients (41% female, age 3 ± 5 years) identified who underwent GT placement (40% open versus 32% PEG versus 28% LAP). Following an open approach, there were higher rates of GT-related complications (10% versus 4% LAP versus 3% PEG) and postoperative gastrointestinal issues (24% versus 12% LAP versus 9% PEG) on index hospitalization, both P < .001. Readmission within 30 days and 1 year were 18% and 43%, respectively. Overall readmission rates were not affected by the GT approach (44% open versus 44% LAP versus 43% PEG, P = .773). However, readmission for GT-related complications was the lowest following the LAP approach (<0.3% versus 2% open versus 2% PEG, P < .001). When those who also underwent fundoplication were excluded, conversion to gastrojejunostomy or jejunostomy (GJ/J) on readmission was higher following open and PEG approaches (4% open versus 2% PEG versus 0% LAP, P = .039). Conclusions: Compared with PEG gastrostomy and open gastrostomy, LAP GT placement appears to have lower index complications and reoperation rates, and at least comparable readmission outcomes. Despite these advantages, LAP GT placement remains underutilized.