ABSTRACT
An optical chopper-based re-circulating loop is presented for emulating long-haul transmission using few-mode fiber (FMF). A proper functioning of the loop is verified by transmission of three-mode-division multiplexed × 128 Gb/s DP-QPSK over more than 1000 km of FMF.
ABSTRACT
We show transmission of 20 wavelength-division-multiplexed (WDM) × 960-Gb/s space-division-multiplexed 32QAM modulated channels (spectral efficiency (SE) of 15 bits/s/Hz) over 60 km of few-mode fiber (FMF) with inline few-mode EDFA (FM-EDFA). Soft-decision FEC was implemented and used to achieve error-free transmission.
ABSTRACT
We successfully fabricate three-mode erbium doped fiber with a confined Er(3+) doped ring structure and experimentally characterize the amplifier performance with a view to mode-division multiplexed (MDM) transmission. The differential modal gain was effectively mitigated by controlling the relative thickness of the ring-doped layer in the active fiber and pump launch conditions. A detailed study of the modal gain properties, amplifier performance in a MDM transmission system and inter-modal cross-gain modulation and associated transient effects is presented.
Subject(s)
Amplifiers, Electronic , Fiber Optic Technology/instrumentation , Lasers, Solid-State , Telecommunications/instrumentation , Equipment Design , Equipment Failure AnalysisABSTRACT
We demonstrate three possible scenarios for upgrading current single-mode transmission networks with high capacity few-mode fiber technology using mode-division multiplexing (MDM). The results were obtained from measurements over a number of field-deployed single-mode fiber links with an additional experimental in-line amplified few-mode fiber link. The results confirm the viability of employing MDM using few-mode fiber technology to gradually replace legacy optical systems.
ABSTRACT
Transmission of a 73.7 Tb/s (96 x 3 x 256-Gb/s) DP-16QAM mode-division-multiplexed signal over 119 km of few-mode fiber transmission line incorporating an inline multi mode EDFA and a phase plate based mode (de-)multiplexer is demonstrated. Data-aided 6 x 6 MIMO digital signal processing was used to demodulate the signal. The total demonstrated net capacity, taking into account 20% of FEC-overhead and 7.5% additional overhead (Ethernet and training sequences), is 57.6 Tb/s, corresponding to a spectral efficiency of 12 bits/s/Hz.
ABSTRACT
We compare the transmission performance of 112-Gb/s POLMUX-QPSK modulation over large-A(eff) Pure-Silica core fiber and SSMF using EDFA-only amplification. The higher nonlinear threshold of the large-A(eff) Pure-Silica core fiber allows for a 55% increase in transmission distance. By using back-propagation an additional 10% increase is observed. In case spans with equal length for both fiber types and two splices per span only would have been used, resulting in a lower span loss for the large-A(eff) Pure-Silica core fiber, the total increase grows to 85%.
