Size and composition dependent multiple exciton generation efficiency in PbS, PbSe, and PbS(x)Se(1-x) alloyed quantum dots.

Using ultrafast transient absorption and time-resolved photoluminescence spectroscopies, we studied multiple exciton generation (MEG) in quantum dots (QDs) consisting of either PbSe, PbS, or a PbSxSe1-x alloy for various QD diameters with corresponding bandgaps (Eg) ranging from 0.6 to 1 eV. For each QD sample, we determine the MEG efficiency, ηMEG, defined in terms of the electron-hole pair creation energy (εeh) such that ηMEG = Eg/εeh. In previous reports, we found that ηMEG is about two times greater in PbSe QDs compared to bulk PbSe, however, little could be said about the QD-size dependence of MEG. In this study, we find for both PbS and PbSxSe1-x alloyed QDs that ηMEG decreases lineally with increasing QD diameter within the strong confinement regime. When the QD radius is normalized by a material-dependent characteristic radius, defined as the radius at which the electron-hole Coulomb and confinement energies are equivalent, PbSe, PbS, and PbSxSe1-x exhibit similar MEG behaviors. Our results suggest that MEG increases with quantum confinement, and we discuss the interplay between a size-dependent MEG rate versus hot exciton cooling.

Control of PbSe quantum dot surface chemistry and photophysics using an alkylselenide ligand.

We have synthesized alkylselenide reagents to replace the native oleate ligand on PbSe quantum dots (QDs) in order to investigate the effect of surface modification on their stoichiometry, photophysics, and air stability. The alkylselenide reagent removes all of the oleate on the QD surface and results in Se addition; however, complete Se enrichment does not occur, achieving a 53% decrease in the amount of excess Pb for 2 nm diameter QDs and a 23% decrease for 10 nm QDs. Our analysis suggests that the Se ligand preferentially binds to the {111} faces, which are more prevalent in smaller QDs. We find that attachment of the alkylselenide ligand to the QD surface enhances oxidative resistance, likely resulting from a more stable bond between surface Pb atoms and the alkylselenide ligand compared to Pb-oleate. However, binding of the alkylselenide ligand produces a separate nonradiative relaxation route that partially quenches PL, suggesting the formation of a dark hole-trap.

Tuning the synthesis of ternary lead chalcogenide quantum dots by balancing precursor reactivity.

We report the synthesis and characterization of composition-tunable ternary lead chalcogenide alloys PbSe(x)Te(1-x), PbS(x)Te(1-x), and PbS(x)Se(1-x). This work explores the relative reaction rates of chalcogenide precursors to produce alloyed quantum dots (QDs), and we find the highly reactive bis(trimethylsilyl) (TMS(2))-based precursors allow for the homogeneous incorporation of anions. By varying the Pb to oleic acid ratio, we demonstrate size control of similar composition alloys. We find the resulting QDs are Pb-rich but the Pb/anion ratio is size- and composition-dependent in all alloyed QD as well as in PbSe, PbTe, and PbS QDs and is consistent with the reaction rates of the anion precursors. A more reactive anion precursor results in a lower Pb/anion ratio.

Iodide in CTAB prevents gold nanorod formation.

The gold nanocrystal seed-mediated approach using cetyltrimethylammonium bromide (CTAB) as a stabilizing surfactant is commonly used to make large quantities of monodisperse gold nanorods. This method, however, has been at times difficult to reproduce in different laboratories. We recently showed [Smith, D. K.; Korgel, B. A. Langmuir 2008, 24, 644-649] that a very low concentration impurity in CTAB obtained from some suppliers prevents nanorod growth but were not able to identify the impurity. Here, we report that the impurity is iodide. Inductively coupled plasma mass spectroscopy (ICP-MS) revealed that iodide concentrations vary in CTAB from different suppliers, from less than 2.75 ppm up to 840 ppm. When CTAB with iodide concentrations greater than 50 ppm is used, nanorods do not form and the product consists entirely of spherical nanocrystals. Iodide slows the reduction of Au(III) to Au0. Iodide adsorption on Au {111} surfaces inhibits nanorod growth.

Self-assembled simple hexagonal AB(2) binary nanocrystal superlattices: SEM, GISAXS, and defects.

Binary superlattices (BSLs) of sterically stabilized, hydrophobic, large (A; 11.5 nm diameter) Fe(2)O(3) and small (B; 6.1 nm diameter) Au nanocrystals were assembled by slow evaporation of colloidal dispersions on tilted substrates. A detailed analysis of the BSL structure was carried out using transmission and scanning electron microscopy (TEM and SEM) and grazing incidence small-angle X-ray scattering (GISAXS). The BSLs were simple hexagonal (sh) AB(2) superlattices (isostructural with the compound AlB(2); space group 191, P6/mmm) of large nanocrystals occupying a simple hexagonal lattice with small nanocrystals in the interstitial spaces. SEM and GISAXS confirmed long-range order of the BSLs and GISAXS revealed that the superlattice is slightly contracted (8-12%) perpendicular to the substrate as a result of solvent drying in the deposition process. When the sh-AB(2) superlattice deposits on a (100) plane, this shrinkage occurs in the [210] direction and changes the lattice symmetry to centered orthorhombic. Additionally, nearly periodic superlattice dislocations consisting of inserted half-planes of gold nanocrystals were observed by SEM in some BSLs.

Two-photon-induced photoluminescence imaging of tumors using near-infrared excited gold nanoshells.

Gold nanoshells (dielectric silica core/gold shell) are a novel class of hybrid metal nanoparticles whose unique optical properties have spawned new applications including more sensitive molecular assays and cancer therapy. We report a new photo-physical property of nanoshells (NS) whereby these particles glow brightly when excited by near-infrared light. We characterized the luminescence brightness of NS, comparing to that of gold nanorods (NR) and fluorescent beads (FB). We find that NS are as bright as NR and 140 times brighter than FB. To demonstrate the potential application of this bright two-photon-induced photoluminescence (TPIP) signal for biological imaging, we imaged the 3D distribution of gold nanoshells targeted to murine tumors.

The importance of the CTAB surfactant on the colloidal seed-mediated synthesis of gold nanorods.

Gold nanorods were synthesized by the colloidal seed-mediated, surfactant-assisted approach [Gou et al., Chem. Mater. 2005, 17, 3668-3672] using CTAB (hexadecylcetyltrimethylammonium bromide) obtained from ten different suppliers. The yield of gold nanorods depended strongly on the CTAB used: with the same recipe, three of the CTABs did not yield nanorods and produced only spherical gold particles, whereas the other CTABs yielded nanorods with nearly 100% yield. These results suggest that an impurity in the CTAB is very important for nanorod formation.

Multifunctional Particles: Magnetic Nanocrystals and Gold Nanorods Coated with Fluorescent Dye-Doped Silica Shells.

Multifunctional colloidal core-shell nanoparticles of magnetic nanocrystals (of iron oxide or FePt) or gold nanorods encapsulated in silica shells doped with the fluorescent dye, Tris(2,2'-bipyridyl)dichlororuthenium(II) hexahydrate (Rubpy) were synthesized. The as-prepared magnetic nanocrystals are initially hydrophobic and were coated with silica using a microemulsion approach, while the as-prepared gold nanorods are hydrophilic and were coated with silica using a Stöber-type of process. Each approach yielded monodisperse nanoparticles with uniform fluorescent dye-doped silica shells. These colloidal heterostructures have the potential to be used as dual-purpose tags-exhibiting a fluorescent signal that could be combined with either dark-field optical contrast (in the case of the gold nanorods), or enhanced contrast in magnetic resonance images (in the case of magnetic nanocrystal cores). The optical and magnetic properties of the fluorescent silica-coated gold nanorods and magnetic nanocrystals are reported.

Two-photon luminescence imaging of cancer cells using molecularly targeted gold nanorods.

We demonstrate the use of gold nanorods as bright contrast agents for two-photon luminescence (TPL) imaging of cancer cells in a three-dimensional tissue phantom down to 75 mum deep. The TPL intensity from gold-nanorod-labeled cancer cells is 3 orders of magnitude brighter than the two-photon autofluorescence (TPAF) emission intensity from unlabeled cancer cells at 760 nm excitation light. Their strong signal, resistance to photobleaching, chemical stability, ease of synthesis, simplicity of conjugation chemistry, and biocompatibility make gold nanorods an attractive contrast agent for two-photon imaging of epithelial cancer.