ABSTRACT
Thermoset/carbon nanotube (CNT) sheet nanocomposites were successfully fabricated by resistive heating assisted infiltration and cure (RHAIC) of the polymer matrix resin. Resistive heating takes advantage of the electrical and thermal conductivity of CNTs to rapidly and uniformly introduce heat into the CNT sheet. Heating the CNT sheet reduces the viscosity of the polymer resin due to localized temperature rise in close proximity to the resin, which enhances resin flow, penetration, and wetting of the CNT reinforcement. Once the resin infusion process is complete, the applied power is increased to raise the temperature of the CNT sheet, which rapidly cures the polymer matrix. Tensile tests were used to evaluate the mechanical properties of the processed thermoset/CNT sheet nanocomposites. The improved wetting and adhesion of the polymer resin to the CNT reinforcement yield significant improvement of thermoset/CNT nanocomposite mechanical properties. The highest specific tensile strength of bismaleimide(BMI)/CNT sheet nanocomposites was obtained to date was 684 MPa/(g/cm(3)), using 4 V (2 A) for resin infiltration, followed by precure at 10 V (6 A) for 10 min and post curing at 240 °C for 6 h in an oven. The highest specific Young's modulus of BMI/CNT sheet nanocomposite was 71 GPa/(g/cm(3)) using resistive heating infiltration at 8.3 V (4.7 A) for 3 min followed by resistive heating cure at 12.5 V (7 A) for 30 min. In both cases, the CNT sheets were stretched and held in tension to prevent relaxation of the aligned CNTs during the course of RHAIC.
ABSTRACT
A rapid, solventless method is described for the decoration of carbon nanotubes with metal nanoparticles. The straightforward two-step process utilizes neither reducing agents nor electric current and involves the dry mixing of a precursor metal salt (e.g., a metal acetate) with carbon nanotubes (single- or multi-walled) followed by heating in an inert atmosphere. The procedure is scalable to multigram quantities and generally applicable to various other carbon substrates (e.g., carbon nanofiber, expanded graphite, and carbon black) and many metal salts (e.g., Ag, Au, Co, Ni, and Pd acetates). As a model system, Ag nanoparticle-decorated carbon nanotube samples were prepared under various mixing techniques, metal loading levels, thermal treatment temperatures, and nanotube oxidative acid treatments. These nanohybrids were characterized by a variety of microscopic and spectroscopic techniques. For example, X-ray diffraction and scanning electron microscopy indicated that the average size of the Ag nanoparticles has little to do with the thermal treatment temperature but can be easily controlled by varying the Ag loading. Raman spectroscopy illustrated both the metal-nanotube electronic interactions and the surface enhancement effect from the Ag nanoparticle attachment. High-resolution transmission electron microscopy captured the in situ salt-to-metal conversion events on the nanotube surface. The mechanistic implications from the characterization results are discussed.
