Formulation study of PLGA in situ films for topical delivery of salicylates.

A film-forming system (FFS) represents a convenient topical dosage form for drug delivery. In this study, a non-commercial poly(lactic-co-glycolic acid) (PLGA) was chosen to formulate an FFS containing salicylic acid (SA) and methyl salicylate (MS). This unique combination is advantageous from a therapeutic point of view, as it enabled modified salicylate release. It is beneficial from a technological perspective too, because it improved thermal, rheological, and adhesive properties of the in situ film. DSC revealed complete dissolution of SA and good miscibility of MS with the polymer. MS also ensures optimal viscoelastic and adhesive properties of the film, leading to prolonged and sustained drug release. The hydrolysis of MS to active SA was very slow at skin pH 5.5, but it apparently occurred at physiological pH 7.4. The film structure is homogeneous without cracks, unlike some commercial preparations. The dissolution study of salicylates revealed different courses in their release and the influence of MS concentration in the film. The formulated PLGA-based FFS containing 5 % SA and 10 % MS is promising for sustained and prolonged local delivery of salicylates, used mainly for keratolytic and anti-inflammatory actions and pain relief.

Analysis of terbinafine in PLGA-based drug delivery systems by a fast and sensitive UHPLC-DAD method.

A novel ultra-high performance chromatography method with multichannel detection that allows fast, sensitive, and robust analysis of an antifungal drug terbinafine and its three main impurities ß-terbinafine, (Z)-terbinafine, and 4-methylterbinafine in just 5.0 min has been developed. Analysis of terbinafine is important in pharmaceutical analysis since it enables the detection of its impurities at very low concentrations. In this study, we focused on the development, optimization, and validation of the UHPLC method as well as its subsequent application in the evaluation of terbinafine and its three main impurities in the dissolution medium to reveal the incorporation of terbinafine in two poly(lactic-co-glycolic acid) (PLGA) carriers and testing of the drug release at pH 5.5. PLGA based drug delivery systems such as solid dispersions, thin films, microparticles, and nanoparticles are new favorable ways of terbinafine administration. PLGA features excellent tissue compatibility, biodegradation, and adjustable drug release profile. Our pre-formulation study indicates that poly(acrylic acid) branched PLGA polyester has more suitable properties than tripentaerythritol branched PLGA polyester. Therefore, the former is likely to enable design of a new drug delivery system for topically applied terbinafine that could facilitate its administration and increase patient compliance.

Allogeneic Bone Impregnated with Biodegradable Depot Delivery Systems for the Local Treatment of Joint Replacement Infections: An In Vitro Study.

Although progress is evident in the effective treatment of joint replacement-related infections, it still remains a serious issue in orthopedics. As an example, the local application of antibiotics-impregnated bone grafts supplies the high drug levels without systemic side effects. However, antibiotics in the powder or solution form could be a risk for local toxicity and do not allow sustained drug release. The present study evaluated the use of an antibiotic gel, a water-in-oil emulsion, and a PLGA microparticulate solid dispersion as depot delivery systems impregnating bone grafts for the treatment of joint replacement-related infections. The results of rheological and bioadhesive tests revealed the suitability of these formulations for the impregnation of bone grafts. Moreover, no negative effect on proliferation and viability of bone marrow mesenchymal stem cells was detected. An ex vivo dissolution test of vancomycin hydrochloride and gentamicin sulphate from the impregnated bone grafts showed a reduced burst and prolonged drug release. The PLGA-based formulation proved to be particularly promising, as one-day burst release drugs was only 15% followed with sustained antibiotics release with zero-order kinetics. The results of this study will be the basis for the development of a new product in the Tissue Section of the University Hospital for the treatment of bone defects and infections of joint replacements.

Matrix Tablets Based on Chitosan-Carrageenan Polyelectrolyte Complex: Unique Matrices for Drug Targeting in the Intestine.

The present study focused on the more detailed characterization of chitosan-carrageenan-based matrix tablets with respect to their potential utilization for drug targeting in the intestine. The study systematically dealt with the particular stages of the dissolution process, as well as with different views of the physico-chemical processes involved in these stages. The initial swelling of the tablets in the acidic medium based on the combined microscopy-calorimetry point of view, the pH-induced differences in the erosion and swelling of the tested tablets, and the morphological characterization of the tablets are discussed. The dissolution kinetics correlated with the rheological properties and mucoadhesive behavior of the tablets are also reported, and, correspondingly, the formulations with suitable properties were identified. It was confirmed that the formation of the chitosan-carrageenan polyelectrolyte complex may be an elegant and beneficial alternative solution for the drug targeting to the intestine by the matrix tablet.

A Study of Compressibility, Compactability and Mucoadhesivity of Tableting Materials for Matrix Systems Based on Chitosan.

The objective of the present research is to evaluate directly compressible chitosan-based tableting materials for the formulation of mucoadhesive matrix tablets intended for targeted drug release to distal segments of the GIT. The influence of sodium alginate, hypromellose, and silicified microcrystalline cellulose (P90) on compressibility, compactability and lubricant sensitivity ratio was tested. Furthermore, the rheological properties of the hydrated surface layer of the matrix tablets and the mucoadhesion to a mucin substrate were analysed. Compressibility was evaluated using the energy profile of the compression process, compactability by means of the tensile strength of tablets, and lubricant sensitivity ratio was calculated to assess the sensitivity to lubricant. Addition of P90 to chitosan improved compressibility, which is demonstrated by the increase in the energy of plastic deformation and the higher tensile strength of tablets. P90 also significantly reduced the high lubricant sensitivity of chitosan. Presence of retarding components led to a decrease in Emax. All tested matrix tablets revealed a good mucoadhesion without a negative effect of P90 content. The viscosity of a gel layer on the surface of matrix tablets containing hypromellose was higher compared to those with sodium alginate. This was not reflected in the adhesive strength of the tablets. The formulated tableting materials combining chitosan and P90 are a suitable matrix for incorporation of an active ingredient, whose delayed release in the intestine can be achieved by the functionality of the chitosan-sodium alginate complex.

PLGA based film forming systems for superficial fungal infections treatment.

As proven in clinical trials, superficial fungal infections can be effectively treated by single topical application of terbinafine hydrochloride (Ter-HCl) in a film forming system (FFS). Poly(lactic-co-glycolic acid) (PLGA) derivatives, originally synthesized with intention to get carriers with optimized properties for drug delivery, and multifunctional plasticizers - ethyl pyruvate, methyl salicylate, or triacetin - were used for formulation of Ter-HCl loaded FFSs. After spraying, a biodegradable, transparent, adhesive, and occlusive thin layer is formed on the skin, representing drug depot. In situ formed films were characterized by thermal, structural, viscoelastic, and antifungal properties as well as drug release and skin penetration. DSC and SEM showed fully amorphous films with Ter-HCl dissolved in PLGA in high concentration (up to 15%). FFSs are viscoelastic fluids with viscosity which can be easily adjusted by the type of plasticizer used and its concentration. The formulations showed excellent bioadhesion properties, thus ensuring persistence on the skin. In situ film based on branched PLGA/A plasticized with 10% of ethyl pyruvate allowed prolonged release of Ter-HCl by linear kinetics for the first 6 days with a total time of almost 14 days. During ex vivo human skin penetration experiment, Ter-HCl was found to be located only in its target layer, the epidermis. According to our results, plasticized branched PLGA derivatives loaded by Ter-HCl are suitable for the development of FFSs for superficial fungal infections treatment.

Branched PLGA derivatives with tailored drug delivery properties.

Despite several shortcomings such as extreme hydrophobicity, low drug capacity, characteristic triphasic drug release pattern with a high burst effect, poly(lactic-co-glycolic acid derivatives are widely used in drug delivery. Most frequent attempts to improve their properties are blending with other polymers or synthesis of block copolymers. We introduce a new class of branched poly(lactic-co-glycolic acid) derivatives as promising biodegradable carriers for prolonged or targeted drug release systems, employed as thin adhesive films, solid dispersions, in situ forming implants or nanoparticles. A series of poly(lactic-co-glycolic acid) derivatives with lower molar mass and star or comb architecture were synthesized by a simple, catalyst free, direct melt polycondensation method not requiring purification of the obtained sterile product by precipitation. Branching monomers used were mannitol, pentaerythritol, dipentaerythritol, tripentaerythritol and polyacrylic acid. The products were characterized by molar mass averages, average branching ratio, rheological and thermal properties.

Terbinafine-loaded branched PLGA-based cationic nanoparticles with modifiable properties.

Although the systemic administration of terbinafine is quite well tolerated, topical treatment of the local infections is often preferred. New formulation strategies in topical antifungal therapy represent the polymeric nanoparticles (NPs). We successfully employed the originally synthesized PLGA derivatives of branched architectures of various molar masses, branching ratio, and high number of terminal hydroxyl or carboxyl groups for compounding of terbinafine loaded nanoparticles by nanoprecipitation method. Employing the polymers with tailored properties allowed us to formulate the NPs with desired particle size, loading capacity for drug, mucoadhesive properties, and drug release profile. The hydrophobicity and the polyester concentration revealed the main impact on the NPs size ranging from 100 to 600 nm. The stability of the nanosuspension is demonstrated by zeta potential >25 mV, and polydispersity index values <0.2. We used terbinafine in its less dissolved form of the base to increase the drug loading and delay the release. Cationic surfactant as stabilizer give the NPs high positive surface charge enhancing the adhesion to the mucosal surfaces. All formulations provided prolonged sustained release of terbinafine for several days. Antimicrobial potential has been proven by agar-well diffusion method.

Mucoadhesive plasticized system of branched poly(lactic-co-glycolic acid) with aciclovir.

Commercially available antibacterial semisolid preparations intended for topical application provide only short-term drug release. A sustained kinetics is possible by exploitation of a biodegradable polymer carrier. The purpose of this work is to formulate a mucoadhesive system with aciclovir (ACV) based on a solid molecular dispersion of this drug in poly(lactic-co-glycolic acid) branched on tripenterythritol (PLGA/T). The ACV incorporation into PLGA/T was carried out either by solvent method, or melting method, or plasticization method using various plasticizers. The drug-polymer miscibility, plasticizer efficiency and content of residual solvent were found out employing DSC. Viscosity was measured at the shear rate range from 0.10 to 10.00 s(-1) at three temperatures and data were analyzed by Newtonian model. The mucoadhesive properties were ascertained in the tensile test on a mucin substrate. The amount of ACV released was carried out in a wash-off dissolution test. The DSC results indicate a transformation of crystalline form of ACV into an amorphous dissolved in branched polyester carrier, and absence of methyl formate residuals in formulation. All the tested plasticizers are efficient at Tg depression and viscosity decrease. The non-conventional ethyl pyruvate possessing supportive anti-inflammatory activity was evaluated as the most suitable plasticizer. The ACV release was strongly dependent on the ethyl pyruvate concentration and lasted from 1 to 10 days. The formulated PLGA/T system with ACV exhibits increased adhesion to mucosal hydrophilic surfaces and prolonged ACV release controllable by degradation process and viscosity parameters.

Cyclic swelling as a phenomenon inherent to biodegradable polyesters.

The aim of this study is to evaluate and describe the phenomenon and mechanism of the spontaneous cyclic swelling and deswelling of linear and branched aliphatic polyesters in the aqueous medium. The fluctuation of gel volume in one or several cycles as an inherent property of biodegradable and bioerodible materials has not yet been described. We have observed the process at linear and branched polyesters of aliphatic α-hydroxy acids. The period of duration of cycles was in order of hours to days, as influenced by the size of the bodies ranging from 25 to 1000 mg, the temperature in the range of 7°C-42°C, ionic strength, and pH value. The results demonstrated that swelling is accompanied by hydrolysis of ester bonds with the development of small water-soluble osmotically active molecules. After reaching a higher degree of swelling, the obstruction effect of the gel decreases and the diffusion of soluble degradation products from the body to the environment prevails. A decrease in osmotic pressure inside the body and a decrease in the hydrophilic character of the gel matrix result in deswelling by a collapse of the structure, probably due to hydrophobic interactions of nonpolar polyester chains.

Plasticized branched aliphatic oligoesters as potential mucoadhesive drug carriers.

Three oligoesters with different molar mass and degree of branching, intended as drug carriers, were synthesized and their thermal, rheological, adhesive, and drug release properties were studied. Triethyl citrate, ethyl pyruvate, ethyl salicylate, methyl salicylate, triacetin and tributyrin at a concentration of 20% were tested as plasticizers to improve drug incorporation, and application of the polymeric system. All of the tested plasticizers significantly depressed the Tg by at least 25.5°C. Plasticized oligoesters possessed remarkable adhesive properties on mucin in vitro, the adhesion is at least twofold bigger than it is for gels of cellulose derivatives. It was demonstrated that adhesivity increased with decreasing viscosity of oligoester matrices. In vitro dissolution tests of the flat matrices showed the prolongation of fluconazole release up to over 3 days for the oligoester carrier with the highest molar weight and degree of branching. Depending on the matrix hydrophilization, plasticizing led to an acceleration of the fluconazole release, the 3-h burst effect increased three times.