ABSTRACT
Ferric chloride and lime conditioning of sewage sludge is usually interpreted in terms of enhanced aggregation of sludge components. In this study, transmission electron microscopy was used to investigate the conditioning mechanism at a submicronic scale. Samples were collected from two municipal wastewater treatment plants at different stages of the process, embedded in an epoxy resin, and sectioned with an ultramicrotome. Transmission electron microscopy examination of thin sections revealed that clumps of crystalloids develop on external surfaces of flocs after the application of both conditioners. This precipitate creates a rigid structure around the flocs which, upon mechanical dewatering, transmits the stresses applied to the inner parts of flocs. The porous structure of the precipitate may also participate to the withdrawal of water as a draining media. Energy dispersive X-ray spectroscopy revealed that Fe, P, and Ca are the dominant elements in the precipitate with Fe/P and Fe/Ca elemental ratios close to 2.8-3 and 1.1-3, respectively.
Subject(s)
Calcium Compounds/chemistry , Ferric Compounds/chemistry , Oxides/chemistry , Sewage/chemistry , Water Purification , Calcium/analysis , Chemical Precipitation , Chlorides , Crystalloid Solutions , Electrolytes/chemistry , Epoxy Resins , Filtration , Flocculation , Iron/analysis , Isotonic Solutions , Microscopy, Electron , Microtomy , Phosphorus/analysis , Plasma Substitutes/metabolism , Porosity , Sewage/microbiologyABSTRACT
The fractal dimension of a particle aggregate can provide fundamental information on the structure and origin of the aggregate. The analysis of large chemically homogeneous fractal objects has been achieved, but reliable methods of estimating the fractal dimensions of large and chemically heterogeneous aggregates are needed. To this end, we used confocal scanning laser microscopy in which thin optical sections of aggregates were obtained in order to calculate their 2D and ultimately 3D fractal dimensions according to the Mandelbrot theory. Fractal dimensions of 2.08 +/- 0.11 for a Brownian aggregation of latex particles and 2.25 +/- 0.12 for shear aggregation were determined using the confocal technique. These values are within the ranges for universality classes predicted for such aggregates and observed by previous investigators. Thus, this method appears to provide reliable estimates of the fractal dimension with particular utility in the characterization of aggregates composed of larger particles or complex materials where the fractal dimension may not be accessible by light-scattering measurements. The confocal method is used to analyze flocs of activated sludge material as one example of the application of this method to more complex, large (up to 500 µm), and chemically heterogeneous flocs. Copyright 1998 Academic Press.
