Indium(II) Chloride as a Precursor in the Synthesis of Ternary (Ag-In-S) and Quaternary (Ag-In-Zn-S) Nanocrystals.

A new indium precursor, namely, indium(II) chloride, was tested as a precursor in the synthesis of ternary Ag-In-S and quaternary Ag-In-Zn-S nanocrystals. This new precursor, being in fact a dimer of Cl2In-InCl2 chemical structure, is significantly more reactive than InCl3, typically used in the preparation of these types of nanocrystals. This was evidenced by carrying out comparative syntheses under the same reaction conditions using these two indium precursors in combination with the same silver (AgNO3) and zinc (zinc stearate) precursors. In particular, the use of indium(II) chloride in combination with low concentrations of the zinc precursor yielded spherical-shaped (D = 3.7-6.2 nm) Ag-In-Zn-S nanocrystals, whereas for higher concentrations of this precursor, rodlike nanoparticles (L = 9-10 nm) were obtained. In all cases, the resulting nanocrystals were enriched in indium (In/Ag = 1.5-10.3). Enhanced indium precursor conversion and formation of anisotropic, longitudinal nanoparticles were closely related to the presence of thiocarboxylic acid type of ligands in the reaction mixture. These ligands were generated in situ and subsequently bound to surfacial In(III) cations in the growing nanocrystals. The use of the new precursor of enhanced reactivity facilitated precise tuning of the photoluminescence color of the resulting nanocrystals in the spectral range from ca. 730 to 530 nm with photoluminescence quantum yield (PLQY) varying from 20 to 40%. The fabricated Ag-In-S and Ag-In-Zn-S nanocrystals exhibited the longest, reported to date, photoluminescence lifetimes of ∼9.4 and ∼1.4 µs, respectively. It was also demonstrated for the first time that ternary (Ag-In-S) and quaternary (Ag-In-Zn-S) nanocrystals could be applied as efficient photocatalysts, active under visible light (green) illumination, in the reaction of aldehydes reduction to alcohols.

Modification of multiwalled carbon nanotubes with a ruthenium drug candidate-indazolium[tetrachlorobis(1H-indazole)ruthenate(III)] (KP1019 ).

Functionalized carbon nanotubes are interesting, promising and unique delivery systems for anticancer drugs, which are now in the spotlight of nanomedicine. Connecting nanotubes with anticancer drugs or new compounds with anticancer properties aims at improving their stability, efficiency and reduces the toxic side effects of cancer treatment. In our research, we are interested in connecting functionalized MWCNTs-NH2 with [InH][trans-RuCl4(In)2], (KP1019) which is one of the most promising anticancer ruthenium(iii) drug candidates, known mainly as a cytotoxic agent for the treatment of platinum-resistant colorectal cancers. As a result of the amidation of MWCNTs (1), MWCNTs-NH2 (2) were obtained. Then, they were modified with [InH][RuCl4(In)2] (4) and the nanosystem [MWCNT-NH3+][RuCl4(In)2-] (3) was obtained. The characterization of the resulting products was performed using IR, Raman spectroscopy, thermal gravimetric, XRD, STEM-EDX, ESI-MS, ICP-MS, and XPS analyses. The cytotoxic activity has been tested on human lung carcinoma (A549), chronic myelogenous leukemia (K562) and human cervix carcinoma (HeLa) cells which showed the higher toxicity of the nanosystem than the ruthenium complex.

Luminophores of tunable colors from ternary Ag-In-S and quaternary Ag-In-Zn-S nanocrystals covering the visible to near-infrared spectral range.

Ternary Ag-In-S or quaternary Ag-In-Zn-S nanocrystals were prepared from simple precursors (silver nitrate, indium(iii) chloride, zinc stearate in a mixture of DDT and ODE) by injecting a solution of elemental sulfur into OLA. Ternary nanocrystals were modified by depositing either a ZnS or a CdS shell, yielding type I and type II core/shell systems exhibiting photoluminescence QY in the range of 12-16%. Careful optimization of the reaction conditions allowed alloyed quaternary Ag-In-Zn-S nanocrystals exhibiting tunable photoluminescence in the spectral range of 520-720 nm with a QY of 48% and 59% for green and red radiations, respectively, to be obtained. 1H NMR analysis of the nanocrystal organic shell, after dissolution of its inorganic core, indicated that surfacial sulfur atoms were covalently bonded to aliphatic chains whereas surfacial cations were coordinated by amines and carboxylate anions. No thiol-type ligands were detected. Transfer of the prepared nanocrystals to water could be achieved in one step by exchanging the initial ligands for 11-mercaptoundecanoic ones resulting in a QY value of 31%. A new Ag-In-Zn-S nanocrystal preparation method was elaborated in which indium and zinc salts of fatty acids were used as cation precursors and DDT was replaced by thioacetamide. This original DDT-free method enabled similar tuning of the photoluminescence properties of the nanocrystals as in the previous method; however the measured photoluminescence QYs were three times lower. Hence, further optimization of the new method is required.

Cu-Fe-S Nanocrystals Exhibiting Tunable Localized Surface Plasmon Resonance in the Visible to NIR Spectral Ranges.

Cu-Fe-S nanocrystals exhibiting a strong localized surface plasmon resonance (LSPR) effect were synthesized for the first time. The elaborated reproducible preparation procedure involved copper(II) oleate, iron(III) stearate, and sulfur powder dissolved in oleylamine (OLA) as precursors. The wavelength of the plasmonic resonance maximum could be tuned by changing the Cu/Fe ratio in the resulting nanocrystals, being the most energetic for the 1:1 ratio (486 nm) and undergoing a bathochromic shift to ca. 1200 nm with an increase to 6:1. LSPR could also be observed in nanocrystals prepared from the same metal precursors and sulfur powder dissolved in 1-octadecene (ODE), provided that the sulfur precursor was taken in excess. Detailed analysis of the reaction mixture by chromatographic techniques, supplemented by mass spectrometry and (1)H NMR spectroscopy enabled the identification of the true chemical nature of the sulfur precursor in S/OLA, namely, (C18H35NH3(+))(C18H35NH-S8(-)), a reactive product of the reduction of elemental sulfur by the amine groups of OLA. In the case of the S/ODE precursor, the true precursors are much less reactive primary or secondary thioethers and dialkyl polysulfides.

Non-injection synthesis of monodisperse Cu-Fe-S nanocrystals and their size dependent properties.

It is demonstrated that ternary Cu-Fe-S nanocrystals differing in composition (from Cu-rich to Fe-rich), structure (chalcopyrite or high bornite) and size can be obtained from a mixture of CuCl, FeCl3, thiourea and oleic acid (OA) in oleylamine (OLA) using the heating up procedure. This new preparation method yields the smallest Cu-Fe-S nanocrystals ever reported to date (1.5 nm for the high bornite structure and 2.7 nm for the chalcopyrite structure). A comparative study of nanocrystals of the same composition (Cu1.6Fe1.0S2.0) but different in size (2.7 nm and 9.3 nm) revealed a pronounced quantum confinement effect, confirmed by three different techniques: UV-vis spectroscopy, cyclic voltammetry and Mössbauer spectroscopy. The optical band gap increased from 0.60 eV in the bulk material to 0.69 eV in the nanocrystals of 9.3 nm size and to 1.39 eV in nanocrystals of 2.7 nm size. The same trend was observed in the electrochemical band gaps, derived from cyclic voltammetry studies (band gaps of 0.74 eV and 1.54 eV). The quantum effect was also manifested in Mössbauer spectroscopy by an abrupt change in the spectrum from a quadrupole doublet to a Zeeman sextet below 10 K, which could be interpreted in terms of the well defined energy states in these nanoparticles, resulting from quantum confinement. The Mössbauer spectroscopic data confirmed, in addition to the results of XPS spectroscopy, the co-existence of Fe(iii) and Fe(ii) in the synthesized nanocrystals. The organic shell composition was investigated by NMR (after dissolution of the inorganic core) and IR spectroscopy. Both methods identified oleylamine (OLA) and 1-octadecene (ODE) as surfacial ligands, the latter being formed in situ via an elimination-hydrogenation reaction occurring between OLA and the nanocrystal surface.

Nicotine molecularly imprinted polymer: synergy of coordination and hydrogen bonding.

Two new bis(2,2'-bithienyl)methane derivatives, one with the zinc phthalocyanine substituent (ZnPc-S16) and the other with the 2-hydroxyethyl substituent (EtOH-S4), were synthesized to serve as functional monomers for biomimetic recognition of nicotine (Nic) by molecular imprinting. Formation of a pre-polymerization complex of the Nic template with ZnPc-S16 and EtOH-S4 was confirmed by both the high negative Gibbs free energy gain, ΔG = -115.95 kJ/mol, calculated using the density functional theory at the B3LYP/3-21G* level, and the high stability constant, Ks = 4.67 × 10(5) M(-1), determined by UV-vis titration in chloroform. A solution of this complex was used to deposit a Nic-templated molecularly imprinted polymer (MIP-Nic) film on an Au electrode of a quartz crystal resonator of EQCM by potentiodynamic electropolymerization. The imprinting factor was as high as ~9.9. Complexation of the Nic molecules by the MIP cavities was monitored with X-ray photoelectron spectroscopy (XPS), as manifested by a negative shift of the binding energy of the Zn 2p3/2 electron of ZnPc-S16 after Nic templating. For sensing applications, simultaneous chronoamperometry (CA) and piezoelectric microgravimetry (PM) measurements were performed under flow-injection analysis conditions. The limit of detection of the CA and PM chemosensing was as low as 40 and 12 µM, respectively. Among them, the CA chemosensing was more selective to the cotinine and myosmine interferences due to the 1.10 V vs. Ag/AgCl discriminating potential of nicotine electro-oxidation applied. Differences in selectivity to the analyte and interferences were interpreted by modeling complexation of Nic and, separately, each of the interferences with a "frozen" MIP-Nic molecular cavity.

Ligand exchange in quaternary alloyed nanocrystals--a spectroscopic study.

Exchange of initial, predominantly stearate ligands for pyridine in the first step and butylamine (BA) or 11-mercaptoundecanoic acid (MUA) in the second one was studied for alloyed quaternary Cu-In-Zn-S nanocrystals. The NMR results enabled us to demonstrate, for the first time, direct binding of the pyridine labile ligand to the nanocrystal surface as evidenced by paramagnetic shifts of the three signals attributed to its protons to 7.58, 7.95 and 8.75 ppm. XPS investigations indicated, in turn, a significant change in the composition of the nanocrystal surface upon the exchange of initial ligands for pyridine, which being enriched in indium in the 'as prepared' form became enriched in zinc after pyridine binding. This finding indicated that the first step of ligand exchange had to involve the removal of the surface layer enriched in indium with simultaneous exposure of a new, zinc-enriched layer. In the second ligand exchange step (replacement of pyridine with BA or MUA) the changes in the nanocrystal surface compositions were much less significant. The presence of zinc in the nanocrystal surface layer turned out necessary for effective binding of pyridine as shown by a comparative study of ligand exchange in Cu-In-Zn-S, Ag-In-Zn-S and CuInS2, carried out by complementary XPS and NMR investigations.

Fullerene derived molecularly imprinted polymer for chemosensing of adenosine-5'-triphosphate (ATP).

For molecular imprinting of oxidatively electroactive analytes by electropolymerization, we used herein reductively electroactive functional monomers. As a proof of concept, we applied C60 fullerene adducts as such for the first time. For that, we derivatized C60 to bear either an uracil or an amide, or a carboxy addend for recognition of the adenosine-5'-triphosphate (ATP) oxidizable analyte with the ATP-templated molecularly imprinted polymer (MIP-ATP). Accordingly, the ATP complex with all of the functional monomers formed in solution was potentiodynamically electropolymerized to deposit an MIP-ATP film either on an Au electrode of the quartz crystal resonator or on a Pt disk electrode for the piezoelectric microgravimetry (PM) or capacitive impedimetry (CI) determination of ATP, respectively, under the flow-injection analysis (FIA) conditions. The apparent imprinting factor for ATP was ∼4.0. After extraction of the ATP template, analytical performance of the resulting chemosensors, including detectability, sensitivity, and selectivity, was characterized. The limit of detection was 0.3 and 0.03mM ATP for the PM and CI chemosensor, respectively. The MIP-ATP film discriminated structural analogues of ATP quite well. The Langmuir, Freundlich, and Langmuir-Freundlich isotherms were fitted to the experimental data of the ATP sorption and sorption stability constants appeared to be nearly independent of the adopted sorption model.

Simultaneous chronoamperometry and piezoelectric microgravimetry determination of nitroaromatic explosives using molecularly imprinted thiophene polymers.

Thin films of conducting molecularly imprinted polymers (MIPs) were prepared for simultaneous chronoamperometry (CA) and piezoelectric microgravimetry (PM) determination of several explosive nitroaromatic compounds (NTs) including 2,4,6-trinitrophenol (TNP), 2,4,6-trinitrotoluene (TNT), 1,3,5-trinitrobenzene (TNB), and 2,4-dinitrotoluene (DNT). For that, the bis(2,2'-bithienyl)-(4-aminophenyl)methane 1 functional monomer allowing for π-π stacking recognition of the NTs was designed and synthesized. Both theoretical DFT calculations at the M062X/3-21G* level and experimental fluorescence titrations indicated the 1:1 stoichiometry of the 1 and NT prepolymerization complexes formed in solutions. The NT-templated MIP (MIP-NT) films were deposited by potentiodynamic electropolymerization on the Au-coated quartz crystal resonators (Au-QCRs) from solutions of 1 and each of the NT templates at the 1-to-NT mole ratio of 1:1. For sensing application, the NTs were extracted from the MIP-NT films. Completeness of the extraction was confirmed by the presence and absence before and after extraction, respectively, of both the XPS peak of the N 1s electrons of the NT nitro groups and the DPV peak of electroreduction of the NTs for the MIP-NT. Ultimately, the recognition signal was transduced to the analytical signal of simultaneous changes of CA cathodic current and PM resonant frequency. The limit of detection (LOD) for NTs was in the range of hundreds and tens micromolar for CA and PM, respectively. Moreover, selectivity with respect to common interferences of the chemosensors was in the range 2.1-4.8, as determined by molecular cross-imprinting.

Electrochemically synthesized molecularly imprinted polymer of thiophene derivatives for flow-injection analysis determination of adenosine-5'-triphosphate (ATP).

Two selective chemosensors for adenosine-5'-triphosphate (ATP) determination featuring molecularly imprinted polymer (MIP) film recognition units were fabricated. For imprinting, three different thiophene derivatives were used as functional monomers. That is, the uracil substituent of bis(2,2'-bithienyl)methane 2 complementarily H-bond paired the adenine moiety of ATP, the boronic acid substituent of thiophene 3 covalently bound vicinal diols of the ribofuranose moiety, and amide substituents of bis(2,2'-bithienyl)methanes 4 bound to the pyrophosphate moieties. Different binding motifs adopted for the ATP recognition and the structure of the supramolecular pre-polymerization complex were optimized with the DFT computing at the B3LYP/3-21G((*)) level. MIP films were prepared by potentiodynamic electropolymerization of this complex with the imprinting factor of 9.47±0.2. An analytical signal was transduced with a 10-MHz resonator of EQCM and a Pt electrode for the piezoelectric microgravimetry (PM) and capacitive impedometry (CI) determination of ATP, respectively, under FIA conditions. Analytical properties of the MIP film were unraveled by spectroscopic ellipsometry, XPS, IRRAS, and DPV. The limit of detection was 0.1 and 0.2 µM for the PM and CI chemosensor, respectively, being an order of magnitude lower than the ATP concentration in biological systems. Moreover, cross-selectivity was demonstrated with the adenosine-5'-diphosphate (ADP) imprinting and ATP discrimination.

Effect of plasma electrolytic oxidation in the solutions containing Ca, P, Si, Na on the properties of titanium.

The surface layers were formed on titanium by plasma electrolytic oxidation (PEO) in the solutions which contain various amounts of Na(2)SiO(3)x5H(2)O, Na(3)PO(4) x12H(2)O and Ca(CH(3)COO)(2) xH(2)O. The layers were characterized using a scanning electron microscope (SEM) coupled with an energy dispersive spectrometer (EDS) and an X-ray diffractometer (XRD). The titanium/oxide surface layer interface was analyzed by X-ray photoelectron spectroscopy (XPS). The adhesive strength of the oxide layers was evaluated by the scratch-test. The bioactivity of the surface was determined by soaking in a simulated body fluid (SBF) for 7 and 30 days. The corrosion resistance was determined by electrochemical methods after 13, 181, and 733 h exposure in SBF at a temperature of 37°C. The oxide layers obtained were rough and porous and enriched with Ca, P, Si, and Na and their properties depended on the concentration of the components of the electrolyte. The results of the electrochemical examinations, after a 13 h exposure in SBF, show that the surface modification by PEO improves the corrosion resistance of titanium and it is not degraded after a long-term exposure in SBF. The electrochemical impedance spectroscopy (EIS) results indicate that the surface layers have a complex structure.

"Two-point" assembling of Zn(II) and Co(II) metalloporphyrins derivatized with a crown ether substituent in Langmuir and Langmuir-Blodgett films.

The effect of "two-point" interactions of Zn(II) and Co(II) metalloporphyrins, bearing 15-crown-5 ether peripheral substituents, on their assembling in Langmuir and Langmuir-Blodgett (LB) films was investigated. That is, simultaneously, the central metal ion of the porphyrin was axially ligated by a nitrogen-containing ligand in the emerged part of the Langmuir film on one hand, and a suitably selected cation pertaining in the subphase solution was supramolecularly complexed by the crown ether moiety in the submerged part of the film on the other. The compression and polarity properties of the Langmuir films of the derivatized free-base 5,10,15-triphenyl-20-(benzo-15-crown-5)porphyrin, H2(TPMCP), and the corresponding cobalt(II) and zinc(II) metalloporphyrins, denoted as Co(TPMCP) and Zn(TPCMP), respectively, as well as inclusion complexes of the metalloporphyrins with selected cations were investigated. For the axial ligation of Zn(II) and Co(II), pyrazine (pyz) and 4,4'-bipyridnine (bpy) aromatic as well as piperazine (ppz) and 1,4-diazabicyclo[2.2.2]octane (DABCO) cyclic heteroaliphatic ligands were selected. The films were formed on the water subphase solution in the absence and presence of LiCl, NaCl, or NH4Cl. The Langmuir films were built of monolayer J-type aggregates of tilted porphyrin macrocycles. The porphyrins formed rather labile complexes with the cations in the subphase. Nevertheless, the XPS analysis revealed that these cations were LB transferred together with the porphyrins onto solid substrates. In the Co(TPMCP) Langmuir films formed on the water subphases, Co(II) was complexed by aromatic but not cyclic heteroaliphatic ligands, while, in these films formed on the NaCl subphase solutions, the metalloporphyrin was also complexed by DABCO. In Langmuir films spread on alkaline subphase solutions, both aromatic and heteroaliphatic ligands formed complexes with Co(TPMCP) of different stoichiometries. The X-ray reflectivity and GIXD measurements performed on selected LB films revealed some structure-building effects of the axial ligation.