Remote 1,4-Carbon-to-Carbon Boryl Migration: From a Mechanistic Challenge to a Valuable Synthetic Application of Bicycles.

The present paper reports a remote carbon-to-carbon boryl migration via an intramolecular 1,4-B/Cu shift, which establishes an in situ stereospecific electrophilic trap on the alkene moiety. The synthetic application is developed to prepare functionalized cyclopentenes by means of a palladium-catalyzed regioselective intramolecular coupling that completes a strategic cyclopropanation and generates valuable structural bicyclic systems. The mechanism is characterized by DFT (density functional theory) calculations which showed that the 1,4-migration proceeds through an intramolecular, nucleophilic attack of the copper-alkyl moiety on the boron atom bonded to the C(sp2), leading to a 5-membered boracycle structure. The computation of the 1,3- and 1,4-B/Cu shifts is also compared as is the impact of the endo- or exocyclic alkene on the reaction kinetics.

Zr-Based MOF-545 Metal-Organic Framework Loaded with Highly Dispersed Small Size Ni Nanoparticles for CO2 Methanation.

We report the use of Zr-based metal-organic frameworks (MOFs) MOF-545 and MOF-545(Cu) as supports to prepare catalysts with uniformly and highly dispersed Ni nanoparticles (NPs) for CO2 hydrogenation into CH4. In the first step, we studied the MOF support under catalytic conditions using operando diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, ex situ characterizations (PXRD, XPS, TEM, and EDX-element mapping), and DFT calculations. We showed that the high-temperature conditions undoubtedly confer a potential for catalytic functionality to the solids toward CH4 production, while no role of the Cu could be evidenced. The MOF was shown to be transformed into a catalytically active material, amorphized but still structured with dehydroxylated Zr-oxoclusters, in line with DFT calculations. In the second step, Ni@MOF-545 catalysts were prepared using either impregnation (IM) or double solvent (DS) methods, followed by a dry reduction (R) route under H2 to immobilize Ni NPs. The highest catalytic activity was obtained with the Ni@MOF-545 DS R catalyst (595 mmolCH4 gNi-1 h-1) with 100% CH4 selectivity and 60% CO2 conversion after ∼3 h. The higher catalytic activity of Ni@MOF-545 DS R is a result of much smaller (∼5 nm) and better dispersed Ni NPs than in the IM sample (20-40 nm), the latter exhibiting sintering. The advantages of the encapsulation of Ni NPs by the DS method and of the use of a MOF-545-based support are discussed, highlighting the interest of designing yet-unexplored Zr-based MOFs loaded with Ni NPs for CO2 hydrogenation.

Electrocatalytic Reduction of Dinitrogen to Ammonia with Water as Proton and Electron Donor Catalyzed by a Combination of a Tri-ironoxotungstate and an Alkali Metal Cation.

The electrification of ammonia synthesis is a key target for its decentralization and lowering impact on atmospheric CO2 concentrations. The lithium metal electrochemical reduction of nitrogen to ammonia using alcohols as proton/electron donors is an important advance, but requires rather negative potentials, and anhydrous conditions. Organometallic electrocatalysts using redox mediators have also been reported. Water as a proton and electron donor has not been demonstrated in these reactions. Here a N2 to NH3 electrocatalytic reduction using an inorganic molecular catalyst, a tri-iron substituted polyoxotungstate, {SiFe3W9}, is presented. The catalyst requires the presence of Li+ or Na+ cations as promoters through their binding to {SiFe3W9}. Experimental NMR, CV and UV-vis measurements, and MD simulations and DFT calculations show that the alkali metal cation enables the decrease of the redox potential of {SiFe3W9} allowing the activation of N2. Controlled potential electrolysis with highly purified 14N2 and 15N2 ruled out formation of NH3 from contaminants. Importantly, using Na+ cations and polyethylene glycol as solvent, the anodic oxidation of water can be used as a proton and electron donor for the formation of NH3. In an undivided cell electrolyzer under 1 bar N2, rates of NH3 formation of 1.15 nmol sec-1 cm-2, faradaic efficiencies of ∼25%, 5.1 equiv of NH3 per equivalent of {SiFe3W9} in 10 h, and a TOF of 64 s-1 were obtained. The future development of suitable high surface area cathodes and well solubilized N2 and the use of H2O as the reducing agent are important keys to the future deployment of an electrocatalytic ammonia synthesis.

Resolving the Mechanism for H2O2 Decomposition over Zr(IV)-Substituted Lindqvist Tungstate: Evidence of Singlet Oxygen Intermediacy.

The decomposition of hydrogen peroxide (H2O2) is the main undesired side reaction in catalytic oxidation processes of industrial interest that make use of H2O2 as a terminal oxidant, such as the epoxidation of alkenes. However, the mechanism responsible for this reaction is still poorly understood, thus hindering the development of design rules to maximize the efficiency of catalytic oxidations in terms of product selectivity and oxidant utilization efficiency. Here, we thoroughly investigated the H2O2 decomposition mechanism using a Zr-monosubstituted dimeric Lindqvist tungstate, (Bu4N)6[{W5O18Zr(µ-OH)}2] ({ZrW5}2), which revealed high activity for this reaction in acetonitrile. The mechanism of the {ZrW5}2-catalyzed H2O2 degradation in the absence of an organic substrate was investigated using kinetic, spectroscopic, and computational tools. The reaction is first order in the Zr catalyst and shows saturation behavior with increasing H2O2 concentration. The apparent activation energy is 11.5 kcal·mol-1, which is significantly lower than the values previously found for Ti- and Nb-substituted Lindqvist tungstates (14.6 and 16.7 kcal·mol-1, respectively). EPR spectroscopic studies indicated the formation of superoxide radicals, while EPR with a specific singlet oxygen trap, 2,2,6,6-tetramethylpiperidone (4-oxo-TEMP), revealed the generation of 1O2. The interaction of test substrates, α-terpinene and tetramethylethylene, with H2O2 in the presence of {ZrW5}2 corroborated the formation of products typical of the oxidation processes that engage 1O2 (endoperoxide ascaridole and 2,3-dimethyl-3-butene-2-hydroperoxide, respectively). While radical scavengers tBuOH and p-benzoquinone produced no effect on the peroxide product yield, the addition of 4-oxo-TEMP significantly reduced it. After optimization of the reaction conditions, a 90% yield of ascaridole was attained. DFT calculations provided an atomistic description of the H2O2 decomposition mechanism by Zr-substituted Lindqvist tungstate catalysts. Calculations showed that the reaction proceeds through a Zr-trioxidane [Zr-η2-OO(OH)] key intermediate, whose formation is the rate-determining step. The Zr-substituted POM activates heterolytically a first H2O2 molecule to generate a Zr-peroxo species, which attacks nucleophilically to a second H2O2, causing its heterolytic O-O cleavage to yield the Zr-trioxidane complex. In agreement with spectroscopic and kinetic studies, the lowest-energy pathway involves dimeric Zr species and an inner-sphere mechanism. Still, we also found monomeric inner- and outer-sphere pathways that are close in energy and could coexist with the dimeric one. The highly reactive Zr-trioxidane intermediate can evolve heterolytically to release singlet oxygen and also decompose homolytically, producing superoxide as the predominant radical species. For H2O2 decomposition by Ti- and Nb-substituted POMs, we also propose the formation of the TM-trioxidane key intermediate, finding good agreement with the observed trends in apparent activation energies.

Light-Driven Hydrogen Evolution Reaction Catalyzed by a Molybdenum-Copper Artificial Hydrogenase.

Orange protein (Orp) is a small bacterial metalloprotein of unknown function that harbors a unique molybdenum/copper (Mo/Cu) heterometallic cluster, [S2MoS2CuS2MoS2]3-. In this paper, the performance of Orp as a catalyst for the photocatalytic reduction of protons into H2 has been investigated under visible light irradiation. We report the complete biochemical and spectroscopic characterization of holo-Orp containing the [S2MoS2CuS2MoS2]3- cluster, with docking and molecular dynamics simulations suggesting a positively charged Arg, Lys-containing pocket as the binding site. Holo-Orp exhibits excellent photocatalytic activity, in the presence of ascorbate as the sacrificial electron donor and [Ru(bpy)3]Cl2 as the photosensitizer, for hydrogen evolution with a maximum turnover number of 890 after 4 h irradiation. Density functional theory (DFT) calculations were used to propose a consistent reaction mechanism in which the terminal sulfur atoms are playing a key role in promoting H2 formation. A series of dinuclear [S2MS2M'S2MS2](4n)- clusters, with M = MoVI, WVI and M'(n+) = CuI, FeI, NiI, CoI, ZnII, CdII were assembled in Orp, leading to different M/M'-Orp versions which are shown to display catalytic activity, with the Mo/Fe-Orp catalyst giving a remarkable turnover number (TON) of 1150 after 2.5 h reaction and an initial turnover frequency (TOF°) of 800 h-1 establishing a record among previously reported artificial hydrogenases.

ZIF-8 thin films by a vapor-phase process: limits to growth.

Metal-organic frameworks are a class of porous materials that show promising properties in the field of microelectronics. To reach industrial use of these materials, gas phase techniques are often preferred and were recently introduced. However, the thicknesses achieved are not sufficient, limiting further development. In this work, an improved gas phase process allowing ZIF-8 layer formation of several hundreds of nm using cyclic ligand/water exposures is described. Then, by a combination of in-depth surface analyses and molecular dynamics simulations, the presence and role of hydroxyl defects in the ZIF-8 layer to reach this thickness are established. At the same time, this study unveils an inherent limit of the method: thickness growth is consubstantial with defect repairing upon the crystallites ripening; such defect repairing eventually leads to the decrease of the pore window below the diffusion radius of the incoming linker, thus apparently capping the maximum MOF thickness observable for this type of material topology through this growth method.

Electrocatalytic Conversion of CO2 to Formate at Low Overpotential by Electrolyte Engineering in Model Molecular Catalysis.

An electrolyte engineering strategy was developed for CO2 reduction into formate with a model molecular catalyst, [Rh(bpy)(Cp*)Cl]Cl, by modifying the solvent (organic or aqueous), the proton source (H2 O or acetic acid), and the electrode/solution interface with imidazolium- and pyrrolidinium-based ionic liquids (ILs). Experimental and theoretical density functional theory investigations suggested that π+ -π interactions between the imidazolium-based IL cation and the reduced bipyridine ligand of the catalyst improved the efficiency of the CO2 reduction reaction (CO2 RR) by lowering the overpotential, while granting partial suppression of the hydrogen evolution reaction. This allowed tuning the selectivity towards formate, reaching for this catalyst an unprecedented faradaic efficiency (FEHCOO -) ≥90 % and energy efficiency of 66 % in acetonitrile solution. For the first time, relevant CO2 conversion to formic acid/formate was reached at low overpotential (0.28 V) using a homogeneous catalyst in acidic aqueous solution (pH=3.8). These results open up a new strategy based on electrolyte engineering for enhancing carbon balance in CO2 RR.

CO2 Electroreduction in Water with a Heterogenized C-Substituted Nickel Cyclam Catalyst.

Molecular catalysis for selective CO2 electroreduction into CO can be achieved with a variety of metal complexes. Their immobilization on cathodes is required for their practical implementation in electrolytic cells and can benefit from the advantages of a solid material such as easy separation of products and catalysts, efficient electron transfer to the catalyst, and high stability. However, this approach remains insufficiently explored up to now. Here, using an appropriate and original modification of the cyclam ligand, we report a novel [Ni(cyclam)]2+ complex which can be immobilized on carbon nanotubes. This material, once deposited on a gas diffusion layer, provides a novel electrode which is remarkably selective for CO2 electroreduction to CO, not only in organic solvents but also, more remarkably, in water, with faradic efficiencies for CO larger than 90% and current densities of 5-10 mA cm-2 during controlled potential electrolysis in H-cells.

When Identification of the Reduction Sites in Mixed Molybdenum/Tungsten Keggin-Type Polyoxometalate Hybrids Turns Out Tricky.

The mixed molybdenum/tungsten Keggin-type polyoxometalate (POM) hybrid (TBA)4[PW9Mo2O39{Sn(C6H4I)}] (TBA = tert-butylammonium) has been prepared by the reaction between [α-PW9Mo2O39]7- and [Cl3Sn(C6H4I)] in dried acetonitrile, in the presence of tetra-n-butylammonium bromide. A further coupling reaction affords the ferrocenyl derivative (TBA)4[PW9Mo2O39{Sn(C6H4)C≡C(C6H4)Fc}]. The POM hybrids have been thoroughly characterized by NMR and IR spectroscopies. Electrochemical analysis confirms their ease of reduction compared to the all-W analogue, albeit with a second reduction process occurring at a lower potential than in the all-Mo species. It is noteworthy that the second reduction is accompanied by an unusual red shift of the electronic absorption spectrum. Whereas there is no doubt that the first reduction deals with Mo, the location of the second electron in the bireduced species, on the second Mo or on W, has thus been the subject of a cross-investigation by spectroelectrochemistry, electron spin resonance, and theoretical calculations. Finally, it came out that the second reduction is also Mo-centered with two unpaired and antiferromagnetically coupled extra electrons.

Effective Storage of Electrons in Water by the Formation of Highly Reduced Polyoxometalate Clusters.

Aqueous solutions of polyoxometalates (POMs) have been shown to have potential as high-capacity energy storage materials due to their potential for multi-electron redox processes, yet the mechanism of reduction and practical limits are currently unknown. Herein, we explore the mechanism of multi-electron redox processes that allow the highly reduced POM clusters of the form {MO3}y to absorb y electrons in aqueous solution, focusing mechanistically on the Wells-Dawson structure X6[P2W18O62], which comprises 18 metal centers and can uptake up to 18 electrons reversibly (y = 18) per cluster in aqueous solution when the countercations are lithium. This unconventional redox activity is rationalized by density functional theory, molecular dynamics simulations, UV-vis, electron paramagnetic resonance spectroscopy, and small-angle X-ray scattering spectra. These data point to a new phenomenon showing that cluster protonation and aggregation allow the formation of highly electron-rich meta-stable systems in aqueous solution, which produce H2 when the solution is diluted. Finally, we show that this understanding is transferrable to other salts of [P5W30O110]15- and [P8W48O184]40- anions, which can be charged to 23 and 27 electrons per cluster, respectively.

Peptide Hydrolysis by Metal (Oxa)cyclen Complexes: Revisiting the Mechanism and Assessing Ligand Effects.

The mechanism responsible for peptide bond hydrolysis by Co(III) and Cu(II) complexes with (oxa)cyclen ligands has been revisited by means of computational tools. We propose that the mechanism starts by substrate coordination and an outer-sphere attack on the amide C atom of a solvent water molecule assisted by the metal hydroxo moiety as a general base, which occurs through six-membered ring transition states. This new mechanism represents a more likely scenario than the previously proposed mechanisms that involved an inner-sphere nucleophilic attack through more strained four-membered rings transition states. The corresponding computed overall free-energy barrier of 25.2 kcal mol-1 for hydrolysis of the peptide bond in Phe-Ala by a cobalt(III) oxacyclen catalyst (1) is consistent with the experimental values obtained from rate constants. Also, we assessed the influence of the nature of the ligand throughout a systematic replacement of N by O atoms in the (oxa)cyclen ligand. Increasing the number of coordinating O atoms accelerates the reaction by increasing the Lewis acidity of the metal ion. On the other hand, the higher reactivity observed for the copper(II) oxacyclen catalyst with respect to the analogous Co(III) complex can be attributed to the larger Brönsted basicity of the copper(II) hydroxo ligand. Ultimately, the detailed understanding of the ligand and metal nature effects allowed us to identify the double role of the metal hydroxo complexes as Lewis acids and Brönsted bases and to rationalize the observed reactivity trends.

Discovery and Supramolecular Interactions of Neutral Palladium-Oxo Clusters Pd16 and Pd24.

We report on the synthesis, structure, and physicochemical characterization of the first three examples of neutral palladium-oxo clusters (POCs). The 16-palladium(II)-oxo cluster [Pd16 O24 (OH)8 ((CH3 )2 As)8 ] (Pd16 ) comprises a cyclic palladium-oxo unit capped by eight dimethylarsinate groups. The chloro-derivative [Pd16 Na2 O26 (OH)3 Cl3 ((CH3 )2 As)8 ] (Pd16 Cl) was also prepared, which forms a highly stable 3D supramolecular lattice via strong intermolecular interactions. The 24-palladium(II)-oxo cluster [Pd24 O44 (OH)8 ((CH3 )2 As)16 ] (Pd24 ) can be considered as a bicapped derivative of Pd16 with a tetra-palladium-oxo unit grafted on either side. The three compounds were fully characterized 1) in the solid state by single-crystal and powder XRD, IR, TGA, and solid-state 1 H and 13 C NMR spectroscopy, 2) in solution by 1 H, 13 C NMR and 1 H DOSY spectroscopic methods, and 3) in the gas phase by electrospray ionization mass spectrometry (ESI-MS).

Structure-Activity Relationships for the Affinity of Chaotropic Polyoxometalate Anions towards Proteins.

The influence of the composition of chaotropic polyoxometalate (POM) anions on their affinity to biological systems was studied by means of atomistic molecular dynamics (MD) simulations. The variations in the affinity to hen egg-white lysozyme (HEWL) were analyzed along two series of POMs whereby the charge or the size and shape of the metal cluster are modified systematically. Our simulations revealed a quadratic relationship between the charge of the POM and its affinity to HEWL as a consequence of the parabolic growth of POM⋅⋅⋅water interaction with the charge. As the charge increases, POMs become less chaotropic (more kosmotropic) increasing the number and the strength of POM-water hydrogen bonds and structuring the solvation shell around the POM. This atomistic description explains the proportionally larger desolvation energies and less protein affinity for highly charged POMs, and consequently, the preference for moderate charge densities (q/M=0.33). Also, our simulations suggest that POM⋅⋅⋅protein interactions are size-specific. The cationic pockets of HEWL protein show a preference for Keggin-like structures, which display the optimal dimensions (≈1 nm). Finally, we developed a quantitative multidimensional model for protein affinity with predictive ability (r2 =0.97; q2 =0.88) using two molecular descriptors that account for the charge density (charge per metal atom ratio; q/M) and the size and shape (shape weighted-volume; VS ).

Chemical Reactions of Cationic Metallofullerenes: An Alternative Route for Exohedral Functionalization.

The chemistry of cationic forms of clusterfullerenes remain less explored than that of the corresponding neutral or anionic species. In the present work, M3 N@Ih -C80 (M=Sc or Lu) cations were generated by both electrochemical and chemical oxidation methods. The as-obtained cations successfully underwent the typical Bingel-Hirsch reaction that fails with neutral Sc3 N@Ih -C80 . Two isomeric Sc3 N@Ih -C80 cation derivatives, [5,6]-open and [6,6]-open adducts, were synthesized, and the former has never been prepared by means of a Bingel-Hirsch reaction with neutral clusterfullerenes. In the case of the Lu3 N@Ih -C80 cation, however, only a [6,6]-open adduct was obtained. Density functional theory (DFT) calculations indicated that the oxidized M3 N@Ih -C80 was much more reactive than the neutral compound upon addition of the diethyl bromomalonate anion. The Bingel-Hirsch reaction of M3 N@Ih -C80 cations occurred by means of an unusual outer-sphere single-electron transfer (SET) process from the diethyl bromomalonate anion to the stable intermediate [M3 N@C80 (C2 H5 COO)2 CBr]. . Remarkably, the diethyl bromomalonate anion was found to act as both a nucleophile and an electron donor.

Peroxo-Cerium(IV)-Containing Polyoxometalates: [CeIV6(O2)9(GeW10O37)3]24-, a Recyclable Homogeneous Oxidation Catalyst.

The class of peroxo-cerium-containing polyoxometalates has been discovered via the synthesis of the 9-peroxo-6-cerium(IV)-containing 30-tungsto-3-germanate, [CeIV6(O2)9(GeW10O37)3]24- (1). Polyanion 1 consists of a cyclic [Ce6(O2)9]6+ assembly that is stabilized by three dilacunary [GeW10O37]10- Keggin fragments. The title polyanion 1 is solution-stable, on the basis of 183W nuclear magnetic resonance, and was shown to act as a recyclable homogeneous catalyst for the selective, microwave-activated sulfoxidation of the model substrate methionine to the sulfoxide in the absence and to the sulfone in the presence of hydrogen peroxide. Solution and solid-state Raman as well as solid-state infrared studies of 1 demonstrated the complete loss (and regain) of the nine peroxo groups in situ during the catalytic cycle, suggesting that the peroxo-free {Ce6(GeW10)3} skeleton remains most likely intact during the catalytic cycle. Solid-state X-ray photoelectron spectroscopy measurements showed that peroxo loss is accompanied by reduction of the cerium ions from +4 to +3, which is fully reversible. Density functional theory calculations are in complete agreement with all of these observations and furthermore suggest that the reduction of the six cerium(IV) ions is accompanied by the formation of molecular dioxygen.

How Does the Redox State of Polyoxovanadates Influence the Collective Behavior in Solution? A Case Study with [I@V18O42] q- ( q = 3, 5, 7, 11, and 13).

A series of stable reduction-oxidation states of the cagelike [I@VIV xVV18- xO42]5- x polyoxovanadate (POV) with x = 8, 10, 12, 16, and 18 were studied with density functional theory and molecular dynamics to gain insight into the structural and electron distribution characteristics of these metal-oxo clusters and to analyze the charge/redox-dependent assemblage processes in water and acetonitrile (MeCN) solutions. The calculations show that the interplay between the POV redox state (molecular charge) and the solvent polarity, countercation size, and hydrophilicity (or hydrophobicity) controls the POV agglomeration phenomena, which substantially differ between aqueous and MeCN media. In MeCN, agglomeration is more pronounced for intermediate-charged POVs, whereas in water, the lowest-charged POVs and organic countercations tend to agglomerate into a microphase. Tests made on wet MeCN show diminished agglomeration with respect to pure MeCN. Simulations with alkali countercations in water show that only the highest-charged POV can form agglomerates. The herein presented theoretical investigation aims to support experimental studies of POVs in the field of functional nanomaterials and surfaces, where controlled molecular deposition from the liquid phase onto solid substrates requires knowledge about the features of these metal-oxo clusters in discrete solutions.

Modeling the Oxygen Vacancy at a Molecular Vanadium(III) Silica-Supported Catalyst.

Here we report on the use of a silanol-decorated polyoxotungstate, [SbW9O33( tBuSiOH)3]3- (1), as a molecular support to describe the coordination of a vanadium atom at a single-site on silica surfaces. By reacting [V(Mes)3·thf] (Mes = 2,4,6-trimethylphenyl) with 1 in tetrahydrofuran, the vanadium(III) derivative [SbW9O33( tBuSiO)3V(thf)]3- (2) was obtained. Compound 2 displays the paramagnetic behavior expected for a d2-VIII high spin complex (SQUID measurements) with a triplet electronic ground state (ca. 30 kcal·mol-1 more stable than the singlet, from DFT calculations). Compound 2 proves to be a reliable model for reduced isolated-vanadium atom dispersed on silica surfaces [(≡Si-O)3VIII(OH2)], an intermediate that is often proposed in a Mars-van Krevelen type mechanism for partial oxidation of light alcohols. Oxidation of 2 under air produced the oxo-derivative [SbW9O33( tBuSiO)3VO]3- (3). In compound 2, the d2-electrons are localized in degenerated d(V) orbitals, whereas in the electronically analogous bireduced-[SbW9O33( tBuSiO)3VO]5-, 3·(2e), one electron is localized on d(V) orbital and the second one is delocalized on the polyoxotungstic framework, leading to a unique case of a bireduced heteropolyanion derivative with completely decoupled d1-V(IV) and d1-W(V). Our body of experimental results (EPR, magnetic measurements, spectroelectrochemical studies, Raman spectroscopy) and theoretical studies highlights (i) the role of the apical ligand coordination, i.e., thf (σ-donor) vs oxo (π-donor), in destabilizing or stabilizing the d(V) orbitals relative to the d(W) orbitals, and (ii) a geometrical distortion of the O3VO entity that causes a splitting of the degenerated orbitals and the stabilization of one d(V) orbital in the bireduced compound 3·(2e).

Self-assembly study of nanometric spheres from polyoxometalate-phenylalanine hybrids, an experimental and theoretical approach.

Herein, we report on the study of supramolecular assemblies based on polyoxometalates (POMs) upon their modification with amino acids. Two POM-amino acid hybrids were synthesized by coupling a functionalized Keggin type polyoxoanion [PW11O39{Sn(C6H4)C[triple bond, length as m-dash]C(C6H4)COOH}]4- with carboxyl-protected (methyl-ester) phenylalanine or diphenylalanine peptides. Surprisingly, all compounds, including the initial POM, formed supramolecular nanospheres in different solvent mixtures, which were examined by scanning electron microscopy (SEM). Molecular dynamics (MD) simulations for the POM-amino acid species revealed that the hydrophobic forces are mainly responsible for the initial aggregation into incipient micelle type structures, in which the organic arms are buried inside the aggregate while POM polar heads are more exposed to the solvent with tetrabutyl-ammonium counter cations acting as linkers.

Assembly Mechanism of Zr-Containing and Other TM-Containing Polyoxometalates.

The mechanism by which Zr-substituted and other transition metal-substituted polyoxometalates (POMs) form covalently linked dimers has been analyzed by means of static density functional theory (DFT) calculations with a continuous solvent model as well as Car-Parrinello molecular dynamics (CPMD) simulations with explicit solvent molecules. The study includes different stages of the process: the formation of the active species by alkalination of the solution and formation of intercluster linkages. CPMD simulations show that the Zr-triaqua precursor, [W5O18Zr(H2O)3]2-, under basic conditions, reacts with hydroxide anions to form Zr-aqua-hydroxo active species, [W5O18Zr(OH)(H2O)]3-. We computed the DFT potential energy profile for dimerization of [W5O18TM(OH)]n- [TM = ZrIV(H2O), ZrIV, TiIV, and WVI] anions. The resulting overall energy barrier is low for ZrIV, moderate for TiIV, and high for WVI. The computed thermodynamic balance favors the dibridged (µOH)2 linkages for ZrIV, the monobridged (µOH) linkage for TiIV, and the monomeric forms for WVI, in agreement with experimentally observed trends. The lowest energy barrier and largest coordination number of Zr-substituted POMs are both a consequence of the flexible coordination environment and larger radius of Zr.

Probing Polyoxometalate-Protein Interactions Using Molecular Dynamics Simulations.

The molecular interactions between the CeIV -substituted Keggin anion [PW11 O39 Ce(OH2 )4 ]3- (CeK) and hen egg-white lysozyme (HEWL) were investigated by molecular dynamics simulations. The analysis of CeK was compared with the CeIV -substituted Keggin dimer [(PW11 O39 )2 Ce]10- (CeK2 ) and the ZrIV -substituted Lindqvist anion [W5 O18 Zr(OH2 )(OH)]3- (ZrL) to understand how POM features such as shape, size, charge, or type of incorporated metal ion influence the POM⋅⋅⋅protein interactions. Simulations revealed two regions of the protein in which the CeK anion interacts strongly: cationic sites formed by Arg21 and by Arg45 and Arg68. The POMs chiefly interact with the side chains of the positively charged (arginines, lysines) and the polar uncharged residues (tyrosines, serines, aspargines) via electrostatic attraction and hydrogen bonding with the oxygen atoms of the POM framework. The CeK anion shows higher protein affinity than the CeK2 and ZrL anions, because it is less hydrophilic and it has the right size and shape for establishing interactions with several residues simultaneously. The larger, more negatively charged CeK2 anion has a high solvent-accessible surface, which is sub-optimal for the interaction, while the smaller ZrL anion is highly hydrophilic and cannot efficiently interact with several residues simultaneously.