Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 8 de 8
Filter
Add more filters










Database
Language
Publication year range
1.
Front Microbiol ; 9: 1218, 2018.
Article in English | MEDLINE | ID: mdl-29928271

ABSTRACT

Acinetobacter baumannii is a multi-drug resistant opportunistic pathogen, which causes respiratory and urinary tract infections. Its prevalence increases gradually in the clinical setup. Carbapenems (beta-lactam) are most effective antibiotics till now against A. baumannii, but the development of resistance against it may lead to high mortality. Therefore, it is of utmost importance to develop an alternative drug against A. baumannii. In the present study, we have synthesized ZnO nanoparticle (ZnO-NP) and characterized by X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy and UV-Visible spectroscopy. Prepared ZnO-NPs have the size of 30 nm and have different characteristics of ZnO-NPs. Growth kinetics and disk diffusion assay showed that ZnO-NP demonstrated good antibacterial activity against carbapenem resistant A. baumannii. We have also investigated the mechanism of action of ZnO-NPs on the carbapenem resistant strain of A. baumannii. The proposed mechanism of action of ZnO involves the production of reactive oxygen species, which elevates membrane lipid peroxidation that causes membrane leakage of reducing sugars, DNA, proteins, and reduces cell viability. These results demonstrate that ZnO-NP could be developed as alternative therapeutics against A. baumannii.

2.
Phys Chem Chem Phys ; 20(18): 12608-12617, 2018 May 09.
Article in English | MEDLINE | ID: mdl-29693101

ABSTRACT

In this paper, we have investigated the electrical and magnetic response of a La0.4Gd0.1Ca0.5MnO3 polycrystalline sample. This sample seems to exhibit fascinating phenomena like charge ordering, magnetic phase separation, training effects and kinetic arrest. It also shows colossal values of negative magnetoresistance (∼91.7% at 96 K under 1 T applied magnetic field), which raises the possibility of using this sample for technological applications. We have also proposed, in this work, a new empirical model to describe the evolution of resistivity and magnetoresistance as a function of magnetic field. This model was successfully tested on the La0.4Gd0.1Ca0.5MnO3 sample in spite of its complicated magnetic behavior, which suggests the use of this model for other magnetic samples in order to check its validity.

3.
Phys Chem Chem Phys ; 19(43): 29294-29304, 2017 Nov 08.
Article in English | MEDLINE | ID: mdl-29071325

ABSTRACT

In this communication, we report results of the electrical transport properties across the interface of composites consisting of n-type LaMnO3-δ (LMO) and p-type La0.7Ca0.3MnO3 (LCMO) manganites grown on LaAlO3 (LAO) single crystalline substrates using low cost wet chemical solution deposition (CSD) and sophisticated, well-controlled dry chemical vapor deposition (CVD) chemical techniques. The XRD ϕ-scan studies reveal the single crystalline nature of both bilayered composites, with parallel epitaxial growth of LMO and LCMO layers onto the LAO substrate. The valence states of Mn ions in both layers of both composites were identified by performing X-ray photoelectron spectroscopy (XPS). The I-V characteristics of the LMO/LCMO interfaces show strong backward diode-like behavior at higher applied voltages well above the crossover voltage (VNB). Below VNB, the interfaces demonstrate normal diode-like characteristics throughout the studied temperature range. The electric field-induced modulation of the LMO/LCMO junction resistance of the interfaces has been observed. Electric field-dependent electroresistance (ER) modifications at different temperatures have also been studied. The electrical transport properties have been discussed in the context of various mechanisms, such as charge injection, tunneling, depletion region modification and thermal processes across the interface. The effects of structurally and chemically developed sharp interfaces between the LMO and LCMO layers on the transport properties of the presently studied bilayered thin film composites have been discussed on the basis of correlation between the physicochemical characterization and charge transport behavior. A comparison of different aspects of the transport properties has been presented in the context of the structural strain and crystallinity of the composites grown using both wet and dry chemical techniques.

4.
Phys Chem Chem Phys ; 19(7): 5163-5176, 2017 Feb 15.
Article in English | MEDLINE | ID: mdl-28140411

ABSTRACT

In this communication, structural, microstructural, transport and magnetotransport properties are reported for La0.7Pb0.3MnO3/LaAlO3 (LPMO/LAO) manganite films having different thicknesses. All the films were irradiated with 200 MeV Ag+15 swift heavy ions (SHI). Films were grown using the sol-gel method by employing the acetate precursor route. Structural measurements were carried out using the X-ray diffraction (XRD) method at room temperature, while atomic force microscopy (AFM) was performed for the surface morphology. Temperature dependent resistivity under different applied magnetic fields for all the films shows metal to insulator transition at temperature TP. In addition to the metal to insulator transition at TP, the films also exhibit low temperature resistivity upturn behavior. Resistivity, TP and upturn behavior are highly influenced by the film thickness, applied magnetic field and irradiation. To understand the nature of charge transport for the low temperature resistivity behavior and metallic and insulating (semiconducting) regions, various models and mechanisms have been verified and the most suitable mechanism has been found for each region in the resistivity curves. Magnetoresistance (MR) is affected by temperature, film thickness and irradiation. MR behavior has been understood in terms of combined and separate contributions from grains and grain boundaries in the films.

5.
Phys Chem Chem Phys ; 19(9): 6887, 2017 03 01.
Article in English | MEDLINE | ID: mdl-28205663

ABSTRACT

Correction for 'Charge transport mechanisms in sol-gel grown La0.7Pb0.3MnO3/LaAlO3 manganite films' by Eesh Vaghela et al., Phys. Chem. Chem. Phys., 2017, DOI: 10.1039/c6cp07730g.

6.
Phys Chem Chem Phys ; 18(26): 17740-9, 2016 Jun 29.
Article in English | MEDLINE | ID: mdl-27315551

ABSTRACT

In this paper, we report the results of the investigations on the transport properties performed across the manganite-manganite interface in the LaMnO3-δ/La0.7Ca0.3MnO3/LaAlO3 (LMO/LCMO/LAO) heterostructure. The bilayered heterostructure was synthesized by a low cost and simple chemical solution deposition (CSD) method by employing the acetate precursor route. The same LMO/LCMO/LAO heterostructure was also grown using the dry metal oxide chemical vapor deposition (CVD) method and the results of transport characterization have been compared on the basis of wet and dry chemical methods used. XRD Φ-scan measurements were carried out to verify the structural quality and crystallographic orientations of LMO and LCMO manganite layers, for both wet and dry chemical method grown heterostructures. For wet and dry chemical methods, the temperature dependent resistance of the LMO/LCMO interface suggests the metallic nature. The asymmetric I-V curves collected at different temperatures show normal diode characteristics which get transformed to backward diode characteristics at high temperatures under high applied voltages at Vtr for both the methods. The values of Vtr are strongly dependent on the chemical method used. I-V data have been fitted using the Simmons model at different temperatures and discussed in terms of the spin-flip scattering mechanism for both wet and dry chemical method grown heterostructures. The electric field dependent electroresistance (ER) behavior of the presently studied LMO/LCMO manganite-manganite interface, grown using wet and dry chemical methods, has been understood on the basis of complex mechanisms including charge injection, formation of the depletion region, the tunneling effect, thermal processes and junction breakdown and their dependence on the applied electric field, field polarity and temperature studied.

7.
J Nanosci Nanotechnol ; 9(9): 5681-6, 2009 Sep.
Article in English | MEDLINE | ID: mdl-19928288

ABSTRACT

Sol-Gel synthesis offers relatively inexpensive scale processing of mixed oxide materials with a good control over the stoichiometry and morphology which helps to tailor the required materials on atomic scale to suit specific applications. Nanophasic polycrystalline samples of La0.7Pb0.3MnO3 (LPMO) manganites having perovskite type structure synthesized by novel Sol-Gel technique using acetate precursor route were sintered at various temperatures in the range 950-1150 degrees C for studying the effect of grain size modifications on their structural, transport and magnetotransport properties. X-ray diffraction (XRD) studies show that the samples exhibit rhombohedral structure crystallizing in space group R-3C. Microstructural investigations using Scanning Electronic Microscopy (SEM), Atomic Force Microscopy (AFM) and Lateral Force Microscopy (LFM) measurements reveal the observation of secondary grain growth behavior starting in the sample sintered at 1000 degrees C. The d.c. four probe resistivity measurements with and without applied magnetic field in the temperature range of 2-380 K, show the effect of secondary grain growth on the magnetoresistance (MR) behavior of LPMO manganites. The microstructural studies show the atomic scale engineering at nanoscale which is reflected in the improvement of surface to volume ratio (D(-1)) which in turn modifies the physical properties of samples under investigation. All the samples exhibit resistivity minima at approximately 30 K which can be explained in terms of e-e interaction at 0 Tesla field. There is a correlation between the parameters derived from e-e scattering model and the secondary grain growth present in the samples. The results of the microstructural and MR measurements on the nanostructured LPMO manganites have been discussed in detail.


Subject(s)
Nanostructures , Polymethyl Methacrylate , Materials Testing , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Nanostructures/chemistry , X-Ray Diffraction
8.
J Nanosci Nanotechnol ; 8(8): 4146-51, 2008 Aug.
Article in English | MEDLINE | ID: mdl-19049192

ABSTRACT

Grain-size dependence of electronic transport and magnetoresistance (MR) properties of nanostructured La0.7Sr0.3MnO3 (LSMO) manganite thin films on LaAlO3 (100) single crystal substrates prepared using Chemical Solution Deposition (CSD) technique have been studied. The LSMO thin films were annealed at temperatures in the range of 700-1000 degrees C for different time intervals [6 h and 12 h] and crystallized as singlephase LSMO. Microstructural studies carried out using AFM show a marginal increase in the grain-size from 50 to 90 nm as the temperature was varied from 700 degrees C to 1000 degrees C respectively. It has been observed that the insulator-metal transition (T(p)) and MR depend on the grain size. In zero applied field, resistivity reduction is approximately 10(3) at 5 K for the films annealed at 700 degrees C [T(p) approximately 341 K] and 1000 degrees C [T(p) approximately 373 K]. MR versus H isotherms reveal that MR enhances in the vicinity of T(p) but decreases at low temperatures. The results obtained from the electronic and magnetotransport studies are in good agreement with the change in surface morphology of the films studied, which shows that the randomly distributed domains are composed of faceted grains. Synthesizing conditions, annealing temperature and time control the growth and alignment of grains into the domains, which cause better conduction at grain interface.

SELECTION OF CITATIONS
SEARCH DETAIL
...