ABSTRACT
Textiles functionalized with cupric oxide (CuO) nanoparticles have become a promising option to prevent the spread of diseases due to their antimicrobial properties, which strongly depend on the structure and morphology of the nanoparticles and the method used for the functionalization process. This article presents a review of work focused on textiles functionalized with CuO nanoparticles, which were classified into two groups, namely, in situ and ex situ. Moreover, the analyzed bacterial strains, the resistance of the antimicrobial properties of textiles to washing processes, and their cytotoxicity were identified. Finally, the possible antimicrobial mechanisms that could develop in Gram-positive and Gram-negative bacteria were described.
Subject(s)
Anti-Bacterial Agents/chemistry , Copper/chemistry , Cotton Fiber/microbiology , Metal Nanoparticles/chemistry , Anti-Bacterial Agents/administration & dosage , Anti-Bacterial Agents/toxicity , Copper/administration & dosage , Copper/toxicity , Cotton Fiber/toxicity , Gram-Negative Bacteria/drug effects , Gram-Positive Bacteria/drug effects , Humans , In Vitro Techniques , Laundering , Metal Nanoparticles/administration & dosage , Metal Nanoparticles/ultrastructure , Microscopy, Electron, Scanning , NanotechnologyABSTRACT
Arsenic (As) exposure from surface and groundwater in Peru is being recognised as a potential threat but there are limited studies on As in the food-chain and none on As in Peruvian rice. In this study, we have determined the As content in rice cultivated in the Tumbes river basin located in the northern province of Peru, an area known for extensive rice cultivation. We collected rice and soil samples from agricultural fields, soil was collected using grid sampling technique while rice was collected from the heaps of harvested crop placed across the fields. The average total As concentration in rice was 167.94⯱â¯71⯵gâ¯kg-1 (nâ¯=â¯29; range 68.39-345.31⯵gâ¯kg-1). While the rice As levels were not highly elevated, the As content of few samples (nâ¯=â¯7) greater than 200⯵gâ¯kg-1 could contribute negatively to human health upon chronic exposure. Average concentration of As in soil was 8.63⯱â¯7.8â¯mgâ¯kg-1 (nâ¯=â¯30) and soil to grain transfer factor was 0.025⯱â¯0.018 for 12 matched samples. Compared to our previous pilot study in 2006 (samples collected from the same agricultural fields but not from exact locations) there was a 41% decrease in As soil concentration in this study. Rice samples collected in 2006 (nâ¯=â¯5) had a mean concentration of 420⯱â¯109⯵gâ¯kg-1. Our data provides a baseline of rice grain As concentrations in Peruvian province of Tumbes and warrants further studies on factors affecting uptake of As by the rice varieties cultivated in Peru and any potential human health risks.
Subject(s)
Arsenic/analysis , Environmental Monitoring , Oryza/chemistry , Soil Pollutants/analysis , Edible Grain/chemistry , Food Chain , Food Contamination/analysis , Groundwater , Humans , Peru , Pilot Projects , Rivers , SoilABSTRACT
Resumen Empleando un prototipo de reactor, se sintetizaron nanopartículas (NPs) de CuO a través del método de precipitación a partir de CuSO25H2O y de Cu(CH3COO)2H2O. Las NPs obtenidas fueron caracterizadas mediante XRD, FT-IR, TEM y SEM. La actividad antimicrobiana de las NPs se determinó mediante el método de difusión en placa, colocando 20 mg de NPs de CuO sobre cuatro cepas intrahospitalarias o nosocomiales aisladas de la Unidad de Cuidados Intensivos de un hospital nacional de Lima norte (Staphylococcus epidermidis, Aerococcus viridans, Ochrobactrum anthropi y Micrococcus lylae). La caracterización de las NPs de CuO demostró que las sintetizadas a partir de acetato (CuO-Acet) presentaron una fase pura de CuO, mientras que las sintetizadas a partir de sulfato (CuO-Sulf) presentaron dos fases, donde la de CuO representó más del 84%. Los dominios cristalinos del CuO-Acet y CuO-Sulf fueron 15 y 19 nm, respectivamente. Los halos de inhibición de las cepas estudiadas fueron mayores para las NPs de CuO-Sulf que para las NPs de CuO-Acet; solo para la cepa Ochrobactrum anthropi se presentaron halos similares para ambos tipos de NPs.
Abstract Using a prototype reactor, CuO nanoparticles (NPs) were synthetized through the precipitation method, starting from CuSO2 5H2O and Cu(CH3COO)2H2O. The obtained NPs were characterized by XDR, FT-IR, SEM, and TEM. The antimicrobial activity of the NPs was determined by the plate diffusion method, placing 20 mg of NPs onto four nosocomial strains obtained from north Lima national hospital Intensive-Care Unit (Staphylococcus epidermidis, Aerococcus viridans, Ochrobactrum anthropic, and Micrococcus lylae). NPs characterization revealed that those synthetized from acetate (CuO-Acet) shown pure CuO phase, while those synthetized from sulphate CuO-Sulf shown two phases where CuO was the predominant one, having more than 84%. The crystal domains for CuO-Acet and CuO-Sulf were 15 and 19 nm, respectively. The inhibition halos for the studied strains were larger for CuO-Sulf NPs than CuO-Acet NPs, only Ochrobactrum anthropi displayed similar inhibition halos for both types of NPs.
Resumo Usando um protótipo de reator, sintetizaram-se nanopartículas (NPs) de CuO pelo método de precipitação a partir de CuSO25H2O e de Cu(CH3COO)2H2O. As NPs obtidas foram caracterizadas por meio das seguintes técnicas: XRD, FT-IR, TEM e SEM. A atividade antimicrobiana das NPs foi determinada pelo método de difusão em placa, colocando 20 mg de NPs de CuO sobre quatro cepas nosocomiais isoladas de uma Unidade de Terapia Intensiva no hospital nacional de Lima norte (Staphylococcus epidermidis, Aerococcus viridans, Ochrobactrum anthropic e Micrococcus lylae). A caracterização das NPs de CuO mostrou que as nanopartículas sintetizadas a partir do acetato (CuO-Acet) apresentavam uma fase pura de CuO, enquanto que as sintetizadas a partir do sulfato (CuO-Sulf), apresentaram duas fases sendo a fase maior de CuO, com mais de 84%. Os domínios cristalinos de CuO-Acet y CuO-Sulf foram 15 e 19 nm, respectivamente. Os halos de inibição das cepas estudadas foram maiores para as NPs de CuO-Sulf do que as NPs de CuO-Acet somente para a cepa Ochrobactrum anthropi, apresentaram-se halos de inibição parecidos.
ABSTRACT
Resumen Se caracterizaron y se evaluaron carbones activados comerciales (A, B, C y D) utilizados en filtros para el tratamiento de agua en la descontaminación de metales pesados presentes en agua de río y en la eliminacion de microorganismos coliformes; los carbones comerciales resultaron tener estructuras microporosas y mesoporosas. Se determinaron areas superficiales entre 705 y 906 m2/g. Los carbones fueron amorfos y se detectó la presencia de agentes antibacterianos, tales como Ag, Cl, Cu y Si. Se determinó que para el As y Pb, cuyas concentraciones iniciales en el agua contaminada (agua del Río Tumbes-Perú) fueron 56,7 y 224,0 μg/L, respectivamente, el porcentaje de adsorción fue cercano al 100%. También se encontró que la relación entre el pH de carga cero de los carbones y pH del agua del río durante los experimentos juega un rol determinante en la adsorción de los elementos analizados. Por otro lado, la capacidad antibacteriana fue evaluada satisfactoriamente frente a las siguientes cepas de bacterias gram negativas fecales: Escherichia coli (ATCC® 25922™), Salmonella typhimurium (ATCC® 14028™) y Shigella flexneri (ATCC® 12022™). Esta capacidad se basa en la presencia superficial en los carbones de los agentes antibacterianos mencionados.
Abstract Comercial activated carbon samples (A, B, C, and D) used in filters for the treatment of water were characterized and evaluated in the decontamination of heavy metals present in river water and in the elimination of coliform microorganisms. The carbon samples had microporous and mesoporous structures. Surface areas of between 705 and 906 m2/g were found. The carbon samples were amorphous and the presence of antibacterial agents such as Ag, Cl, Cu, and Si was detected. It was determined that for As and Pb, whose initial concentrations in contaminated water (water of the Tumbes river-Peru) were 56.7 and 224.0 μg/L, respectively, the percentage of adsorption was close to 100%. The relationship between point of zero charge pH of the activated carbons and pH of the river water during the experiments plays a determinant role in the adsorption of the analyzed elements. The antibacterial capacity was evaluated satisfactorily against the following strains of fecal gram negative bacteria: Escherichia coli (ATCC® 25922™), Salmonella typhimurium (ATCC® 14028™), and Shigella flexneri (ATCC® 12022™). This ability is based on the surface presence in the carbons ofthe mentioned antibacterial agents.
Resumo Carvões ativados comerciais (A, B, C e D) usado em filtros para o tratamento de água foram caracterizados e avaliados na descontaminação de metais pesados da água do rio e para a remoção de microrganismos coliformes. Os carvões comerciais mostraram estruturas microporosas e mesoporosas. Foram determinadas as áreas superficiais entre 705 e 906 m2/g. As amostras de carvão foram amorfas e foi detectada a presença de agentes antibacterianos, tais como Ag, Cl, Cu e Si. Determinou-se que, no caso de As e Pb, cujas concentrações iniciais na água contaminada (água do rio Tumbes-Peru) foram de 56,7 e 224,0 μg/L respectivamente, a taxa de adsorção foi de quase 100%. Também foi econtrado que e a relação entre o pH de carga zero dos carvões e o pH da água do rio durante as experiências desempenha um papel decisivo na adsorção dos elementos analisados. Além disso, a capacidade antibacteriana foi avaliada com sucesso contra as seguintes variedades de bactérias gram negativas de origem fecal: Escherichia coli (ATCC® 25922™), Salmonella typhimurium (ATCC® 14028™) e Shigella flexneri (ATCC® 12022™). Esta capacidade esta baseada na presença de agentes bacterianos na superfície dos carvões.
ABSTRACT
Buildings alone consume approximately 40% of the annual global energy and contribute indirectly to the increasing concentration of atmospheric carbon. The total life cycle energy use of a building is composed of embodied and operating energy. Embodied energy includes all energy required to manufacture and transport building materials, and construct, maintain, and demolish a building. For a systemic energy and carbon assessment of buildings, it is critical to use a whole life cycle approach, which takes into account the embodied as well as operating energy. Whereas the calculation of a building's operating energy is straightforward, there is a lack of a complete embodied energy calculation method. Although an input-output-based (IO-based) hybrid method could provide a complete and consistent embodied energy calculation, there are unresolved issues, such as an overdependence on price data and exclusion of the energy of human labor and capital inputs. This paper proposes a method for calculating and integrating the energy of labor and capital input into an IO-based hybrid method. The results demonstrate that the IO-based hybrid method can provide relatively complete results. Also, to avoid errors, the total amount of human and capital energy should not be excluded from the calculation.
